Search

Vector-analyzing powers, A(x) and A(y), of the proton-deuteron break-up reaction have been measured by using a polarized-proton beam at 135 MeV impinging on a liquid-deuterium target. For the experiment, the big instrument for nuclear-polarization analysis (BINA) was used at KVI, Groningen, the Netherlands. The data are compared to the predictions of Faddeev calculations using state-of-the-art two- and three-nucleon potentials. Our data are reasonably well described by calculations for the kinematical configurations at which the three-nucleon force (3NF) effect is predicted to be small. However, striking discrepancies are observed at specific configurations, in particular in the cases of symmetric configurations, where the relative azimuthal angle between the two protons is small which corresponds to the d((p) over right arrow, He-2)n channel. The vector-analyzing powers of these configurations are compared to the proton-deuteron elastic scattering to study the spin-isospin sensitivity of the 3NFmodels. The results are compared to the earlier results of the proton-deuteron break-up reaction at 190 MeV protonbeam energy [1]. Disagreement is observed for both protonbeam energies between data and calculations which points to a deficiency in the treatment of spin-isospin part of the 3NF.

The digitalization of the process for building permit (involving the use of 3D information systems) is seen as a priority in a wide part of the world. Since it is a very multidisciplinary use case, involving a variety of stakeholders tackling complex issues and topics, some of them joined their efforts and skills in the European Network for Digital Building Permit. The initial activity of the network, after a review of on-going experiences, was a workshop to share knowledge about the topics involved and to identify the main ambitions of the network with respect to three pillars (i.e. Process – Rules and Requirements – Technology) and the related requirements. It was achieved through a collective brainstorming activity guided by digital tools, whose results were further analysed in a post-processing phase. Such results are presented in this paper and will be the base for planning the future network activity.

The concepts of three-dimensional (3D) real property have been the subject of increased interest in land use management and research since the late ‘90s. Literature provides various examples of extensive research towards 3D Cadastres as well as those that are already implementing 3D cadastral systems. However, in most countries the legal aspects of 3D real property and its incorporation into 3D cadastral systems have not been so rigorously examined. This paper compares and discusses 3D property concepts in 15 cadastral jurisdictions, based on the authors’ national experience, covering Europe, North and Latin America, Middle East and Australia. Each of the legal system in these cadastral jurisdiction are based on different origins of Civil Law, including German, Napoleonic and Scandinavian Civil Law, which can prove useful to research in other Civil Law jurisdictions interested in introducing 3D cadastral systems. These jurisdictions are at different stages of introducing and implementing a 3D cadastral system. This contributes to the detection of the 3D real property concepts that apply as well as deficiencies that prohibit introduction of 3D cadastral systems, while highlighting challenges that may have not yet surfaced in individual jurisdictions. This paper aims to present the different legal concepts regarding 3D real property in the examined countries, focusing on the characteristic features of cadastral objects described as 3D within each country’s legal and cadastral framework. The analysis of the case studies revealed that the countries are on different stages of 3D Cadastral implementation, starting from countries with operational 3D cadastral systems, to others where there is yet no interest in introducing a 3D cadastral system. This paper presents the nature of 3D cadastral objects in each country, as well as differences in the regulatory framework regarding definition, description and registration. The paper continues the legal workshop discussions of the 4th International Workshop on 3D Cadastres in Dubai 2014 by analysing the legal concepts of 3D cadastres in the above-mentioned countries. The outcome is an overview and discussion of existing concepts of 3D property describing their similarities and differences in use, focusing on the legal framework of 3D cadastres. The article concludes by presenting a possible way forward and identifies what further research is needed which can be used to draft national and international research proposals and form legislative amendments towards introduction of national 3D cadastral systems.

Boosted by the dynamic urbanization of cities, indoor environments are getting more and more complex in order to be able to host people properly. While most of our time is spent inside buildings, the need of GIS tools to assist our daily activities that can become tedious, such as indoor navigation or facility management, became more and more urgent. In that perspective, the IndoorGML standard is aiming to address the gaps left by other standards regarding the spatial modelling for indoor navigation. It includes several concepts such as the organization of the spaces into cells along with their network representation and the possibility to represent multiple connected layers. However, being at its first stage, several concepts of the standard could be improved. One of these is the cell subspacing that is not enough discussed in the current version of the standard. In this paper, we explore all the aspects involved in the subdivision process, from the identification of the navigable and non-navigable space cells to the generation of a navigation graph. We propose several criteria on which the indoor sub-spacing can rely to be automatically performed and and illustrate them on a 3D indoor model.

Geographic information and building information modelling both model buildings and infrastructure, but the way in which they are modelled is usually complimentary and BIM-GIS integration is widely considered as a way forward for both domains. For one, more detailed BIM data can feed more general GIS data and GIS data can provide the context that is necessary to BIM data. While previous studies have focused on the theoretical aspects of such an integration at a schema level, in this paper we focus on explaining the geometric and topological issues we have found while trying to develop software to realise such an integration in practice and at a data level. In our preliminary results, which are presented here, we have found that many issues for such an integration remain: handling the geometric and topological problems in BIM models, dealing with bad georeferencing and figuring out the best way to convert data between IFC and CityGML are all open issues.

Road traffic and industrial noise has become a major source of discomfort and annoyance among the residents in urban areas. More than 44 % of the EU population is regularly exposed to road traffic noise levels over 55 dB, which is currently the maximum accepted value prescribed by the Environmental Noise Directive for road traffic noise. With continuously increasing population and number of motor vehicles and industries, it is very unlikely to hope for noise levels to diminish in the near future. Therefore, it is necessary to monitor urban noise, so as to make mitigation plans and to deal with its adverse effects. The 2002/49/EC Environmental Noise Directive aims to determine the exposure of an individual to environmental noise through noise mapping. One of the most important steps in noise mapping is the creation of input data for simulation. At present, it is done semi-automatically (and sometimes even manually) by different companies in different ways and is very time consuming and can lead to errors in the data. In this paper, we present our approach for automatically creating input data for noise simulations. Secondly, we focus on using 3D city models for presenting the results of simulation for the noise arising from road traffic and industrial activities in urban areas. We implemented a few noise modelling standards for industrial and road traffic noise in CityGML by extending the existing Noise ADE with new objects and attributes. This research is a steping stone in the direction of standardising the input and output data for noise studies and for reconstructing the 3D data accordingly.

Building datasets (e.g. footprints in OpenStreetMap and 3D city models) are becoming increasingly available worldwide. However, the thematic (attribute) aspect is not always given attention, as many of such datasets are lacking in completeness of attributes. A prominent attribute of buildings is the year of construction, which is useful for some applications, but its availability may be scarce. This paper explores the potential of estimating the year of construction (or age) of buildings from other attributes using random forest regression. The developed method has a two-fold benefit: enriching datasets and quality control (verification of existing attributes). Experiments are carried out on a semantically rich LOD1 dataset of Rotterdam in the Netherlands using 9 attributes. The results are mixed: the accuracy in the estimation of building age depends on the available information used in the regression model. In the best scenario we have achieved predictions with an RMSE of 11 years, but in more realistic situations with limited knowledge about buildings the error is much larger (RMSE = 26 years). Hence the main conclusion of the paper is that inferring building age with 3D city models is possible to a certain extent because it reveals the approximate period of construction, but precise estimations remain a difficult task.

A measurement of the analyzing powers for the H-2((p) over right arrow ,pp)n break-up reaction was carried out at KVI exploiting a polarized-proton beam at 135 MeV. In this work, we extended the earlier measurements that were done for kinematical configurations at small proton scattering angles to large angles. The results are compared with theoretical calculations based on a two-nucleon (NN) potential alone or combined with a three-nucleon (3N) potential. The theoretical calculations describe the main features of the measured distributions, but none of them can reproduce the details. This indicates the need for further development of the 3N force models.

In this contribution, vector analyzing powers, A(x) and A(y), are presented for the proton-deuteron break-up reaction studied using a polarised-proton beam at 135 MeV impinging on a liquid-deuterium target. For the experiment we used the Big Instrument for Nuclear-polarisation Analysis (BINA) at KVI, the Netherlands. With this setup, we expanded our measurements of analyzing powers compared to earlier published result (Kalantar-Nayestanaki N. et al., Rep. Prog. Phys. 75 (2012)). In particular, we determined, for the first time, A(x) for a large range in the kinematical S, polar and azimuthal angles of the two outgoing protons. Analyzing power data are compared to predictions from Faddeev calculations. Our data are reasonably well described by calculations for kinematical configurations at which the three-nucleon force effect is predicted to be small. However, striking discrepancies are observed at specific configurations, in particular in cases where the relative azimuthal angle between the two protons becomes small. In this contribution, some of these configurations along with the analysis techniques will be presented.

Processes and transactions in Land Administration are outside the scope of the Land Administration Domain Model Edition I published in 2012. Reason is that processes were considered to be country specific. Generic processes would be too difficult to model. This view needs reconsideration – given developments as Fit-For-Purpose Land Administration, Apps and blockchain. In many countries different organizations have their own responsibilities in data maintenance and supply, but may communicate on the basis of standardised administrative and technical update processes. Operationalisation and implementation of LADM requires attention to this aspect - at least at conceptual level (not prescriptive). This will an issue in the development of LADM Edition II and this is the issue that is explored in this paper.

This paper presents the first and incomplete draft text for the revision of IS 19152:2012 ‘Geographic information — Land Administration Domai n Model (LADM)’ within ISO TC211 in the form of a New Working Item Proposal (N WIP). This ‘two-page NWIP’ text aims to describe the scope of proposed project to r evise, and also provides the purpose and justification behind this revision of LADM. The Int ernational Federation of Surveyors (FIG) also submitted to ISO the NWIP for the current vers ion of LADM (IS 19152:2012). As for the revision the ambition is now to go beyond just a co nceptual model by providing steps towards implementations (e.g. more specific profiles, techn ical model in various encodings, etc.), it is the intention that the Open Geospatial Consortium, Inc. (OGC) is heavily involved in the revision and that the result is a joint ISO/OGC sta ndard. For this purpose the recent draft OGC White Paper is added as Appendix 1 to this pape r to provide more detail background information. It is further noted that the complete NWIP for Edit ion II of LADM also ‘Preparatory work’ should be attached; e.g. a draft of the new version of the standard. In the case of the revised LADM standard of course this is based on the IS 191 52:2012, but will contain also contain collected materials from the LADM2017 and LADM2018 workshop.

Standardization in land administration domain has been expanded to 3D and even 4D representations, adopting a multipurpose character, in order to become the foundation of a sustainable and smart economic development. At the moment, although the potential benefits of 3D Cadastre is argued to be enormous and there are plenty of standards related to 3D Cadastre while others enhancing the role of 3D Cities, there is no complete solution for 3D Cadastre. That being so, the last years, there has been a rapid increase in the integration, harmonization and implementation support of such standards. In this context, the integration of 3D legal spaces with 3D physical objects is gaining ground, as the (invisible) legal boundaries do not always match with the physical counterparts, leading to obscure situations. LADM, the International Standard for land administration, was proved to be one of the best candidates to unambiguously represent 3D Rights, Restrictions and Responsibilities. On the other side, spatial data models and virtual city models manage 3D urban structures without focusing on legal aspects. Many researchers have explored integrations between those aspects giving promising results. In this direction, apart from international standards, also national standards have been developed to enable the communication between land information systems. One of the most representatives is INTERLIS, a Swiss standard, a precise, standardized Object Relational modelling language on the conceptual level, which allows for automated quality control. Thus, in this paper the focus is given on how INTERLIS and LADM complement each other in the actual implementation of land administration systems. Main challenges among others in the context of this research include: 1. extensible hierarchical and versioned code lists in INTERLIS models, 2. formally define LADM constraints in INTERLIS, 3. discuss 3D geometry types and 4. introduce a holistic LADM/INTERLIS approach for country profiles.

The paper describes the ongoing developments and standardisation in land administration. Standards are relevant in relation to build as well as maintain and develop a land administration. Standards like the ISO 19152 Land Administration Domain Model (LADM) are helping to jump-start new initiatives and are connecting top-down and bottom-up projects together. The LADM facilitates the efficient set-up of land administration and can function as the core of any land administration system. LADM is flexible, widely applicable and functions as a central source of state-of-the-art international knowledge on this topic. Some future trends in the domain and the maintenance of the standard are presented and being discussed in the paper. These trends may be relevant for the development of a second edition of the LADM over the coming years.These models do not include land administration processes for initial data acquisition, data maintenance and data publication. This is because these processes were considered to be country-specific when the first edition of LADM was prepared; a generic and global approach was likely to be difficult to model. This view may now need reconsideration.

Objective(s): Prostate cancer is the world's leading cause of cancer and the second cause of cancer-related death in men after lung cancer. Differentiation of prostate adenocarcinoma from benign prostate lesions and hyperplasia sometimes cannot be done on the basis of morphologic findings. Considering the fact that in the prostate adenocarcinoma there is no basal cell layer, basal cell markers can help to differentiate prostate adenocarcinoma from cancer mimickers. Materials and Methods: We studied 98 prostate biopsy blocks (40 adenocarcinoma and 58 benign lesions) for basal cell marker expression. Results: p63 and 34βE12 were negative in all prostate adenocarcinoma specimens, but all benign prostate hyperplasia and high grade intraepithelial neoplasia cases expressed them. Conclusion: Basal cell markers can help to distinguish prostate adenocarcinoma from cancer mimickers.

Aim: Narcotics and consequences of their consumers is one of the basic challenges of modern societies. Since family and parenting styles have an important impact on children's psycho social development, the present study investigated the effects of typology of family parenting on drug tendency in adolescent. Method: To do so, a sample of 375 male students was selected of Borujen public high school students in 1389-1390 academic years by multistage cluster random sampling. Sheffer Parenting styles questionnaire and investigator made questionnaire of tendency to drug were completed by selected sample. Typology of family parenting styles was extracted by combining parental and maternal parenting styles. Because of low frequency of some kind of parenting styles, only 6 parenting styles were entered in the analysis and adolescents’ anxiety and depression were compared in various styles by running of Analysis of Variance (ANOVA), and Scheffe Follow up test. Results: Analysis of data demonstrated that adolescents achieve the most positive outcomes and the least tendency to drugs, when both of parents are authoritative. Also, the greatest tendency has been seen in adolescents with two indulgent parents or at least one indulgent parent. Discussion: These findings indicate the importance of parental control on adolescents' attitudes to drug.

Background: Abdominal circumference (AC), biparietal diameters (BPD) and femoral length (FL) are now the main parameters used to obtain estimated fetal weight (EFW). Although the role of soft tissue parameters in determining fetal weight was proved but clinical attention to mid-thigh soft tissue thickness (STT) is limited. Objective: To find the impression of STT on birth weight (BW) and represent a new predictive formula. Materials and Methods: One hundred and fourteen normal singleton term (36-42w) pregnancies with delivery within 72 hours were randomly selected to participate in this prospective cohort study. Variables measured by ultrasonography before birth included: AC, BPD, FL and STT. The actual neonatal BW was also measured after birth. Linear regression model was used and R square and p-value were reported. Results: The mean (SD) of BW was 3406 (405) gr. R square was best fit for the model that STT was added to AC, BPD, FL (r2: 0.77). R square for the model using BPD, AC, FL and model using BPD, STT, FL was the same (r2: 0.7). Best fit formula was Log (BW)= 2.461+0.003BPD+0.001AC+0.007STT+0.005FL. AC (R: 0.67, p

Odontogenic keratocyst (OKC) is a common developmental odontogenic cyst affecting the maxillofacial region. Multiple OKCs are usually seen in association with nevoid basal cell carcinoma syndrome (NBCCS) but approximately 5% of patients with OKC have multiple cysts without concomitant syndromic presentation. This report represents a case of multiple OKCs in a non-syndromic patient

Background: This study was conducted to assess the prevalence of Hepatitis C virus (HCV), Hepatitis B virus (HBV) and Human Immunodeficiency virus (HIV) among hemophilia and thalassemia patients. Methods: This cross-sectional study was conducted from October 2008 to December 2010 in Isfahan, Iran. 1160 adult multi-transfused patients suffering from beta-thalassemia (n = 545) and hemophilia (n = 615) were enrolled in the study. Blood samples were obtained from the patients and were tested for HBs Ag, Anti-HCV Ab and Anti- HIV Ab. Patients with HCV positive underwent genotype determination. Finding: 822 males and 338 females (mean age 22.7 ± 11.5 years, range 1-76 years) were investigated in this study.312 males (57.2%) and 233 (42.8%) females had thalassemia. 511 (83%) males and 104 (17%) females were in hemophilia group. Of the 505 (82.1%) persons with chronic hepatitis in hemophilia patients, 495 (98%) patients were HCV antibody positive and 10 (2%) patients had HBs positive. There were 56 (11%) patients with chronic hepatitis in patients with thalassemia. Of them, 50 (89.2%) patients were HCV antibody positive and 6 (10.8%) patients had HBs positive. None of the thalassemia and hemophilia patients was positive for HIV Ab. HCV genotype 1 was the major genotype among patients. Conclusion: HCV is a major virus of concern in the multi-transfused patients. The strategies for prevention of HBV and safety of blood products in this respect have indeed been successful. Family History of hepatitis is the major risk factors among patients.

Myiasis is the invasion of body tissues of humans or animals by the larvae of the Diptera or two-winged flies. The various forms of myiasis may be classified from clinical or entomological point. This study describes the existence of Chrysomya bezziana (Diptera: Calliphoridae) cases as a causative agent of myiasis in 18 and 87 year-old men in two different regions in Fars Province. To our knowledge, this is the first observation of mentioned species in this province.