Search

Ternary quantum processors offer significant computational advantages over conventional qubit technologies, leveraging the encoding and processing of quantum information in qutrits (three-level systems). To evaluate and compare the performance of such emerging quantum hardware it is essential to have robust benchmarking methods suitable for a higher-dimensional Hilbert space. We demonstrate extensions of industry standard Randomized Benchmarking (RB) protocols, developed and used extensively for qubits, suitable for ternary quantum logic. Using a superconducting five-qutrit processor, we find a single-qutrit gate infidelity as low as $2.38 \times 10^{-3}$. Through interleaved RB, we find that this qutrit gate error is largely limited by the native (qubit-like) gate fidelity, and employ simultaneous RB to fully characterize cross-talk errors. Finally, we apply cycle benchmarking to a two-qutrit CSUM gate and obtain a two-qutrit process fidelity of $0.82$. Our results demonstrate a RB-based tool to characterize the obtain overall performance of a qutrit processor, and a general approach to diagnose control errors in future qudit hardware., 6 pages (+ 2 pages supplement), 5 figures

This paper reports on a cavity haloscope search for dark matter axions in the galactic halo in the mass range $2.81$-$3.31$ ${\mu}eV$. This search excludes the full range of axion-photon coupling values predicted in benchmark models of the invisible axion that solve the strong CP problem of quantum chromodynamics, and marks the first time a haloscope search has been able to search for axions at mode crossings using an alternate cavity configuration. Unprecedented sensitivity in this higher mass range is achieved by deploying an ultra low-noise Josephson parametric amplifier as the first stage signal amplifier.

Spins in silicon quantum devices are promising candidates for large-scale quantum computing. Gate-based sensing of spin qubits offers compact and scalable readout with high fidelity, however further improvements in sensitivity are required to meet the fidelity thresholds and measurement timescales needed for the implementation of fast-feedback in error correction protocols. Here, we combine radio-frequency gate-based sensing at 622 MHz with a Josephson parametric amplifier (JPA), that operates in the 500-800 MHz band, to reduce the integration time required to read the state of a silicon double quantum dot formed in a nanowire transistor. Based on our achieved signal-to-noise ratio (SNR), we estimate that singlet-triplet single-shot readout with an average fidelity of 99.7% could be performed in 1 $\mu$s, well-below the requirements for fault-tolerant readout and 30 times faster than without the JPA. Additionally, the JPA allows operation at a lower RF power while maintaining identical SNR. We determine a noise temperature of 200 mK with a contribution from the JPA (25%), cryogenic amplifier (25%) and the resonator (50%), showing routes to further increase the read-out speed., Comment: Wrong figure reference corrected

Searching for axion dark matter, the ADMX collaboration acquired data from January to October 2018, over the mass range 2.81--3.31 $\mu$eV, corresponding to the frequency range 680--790 MHz. Using an axion haloscope consisting of a microwave cavity in a strong magnetic field, the ADMX experiment excluded Dine-Fischler-Srednicki-Zhitnisky (DFSZ) axions at 100% dark matter density over this entire frequency range, except for a few gaps due to mode crossings. This paper explains the full ADMX analysis for Run 1B, motivating analysis choices informed by details specific to this run., Comment: 17 pages, 17 figures

At its core, quantum mechanics is a theory developed to describe fundamental observations in the spectroscopy of solids and gases. Despite these practical roots, however, quantum theory is infamous for being highly counterintuitive, largely due to its intrinsically probabilistic nature. Neural networks have recently emerged as a powerful tool that can extract nontrivial correlations in vast datasets. These networks routinely outperform state-of-the-art techniques in language translation, medical diagnosis, and image recognition. It remains to be seen if neural networks can be trained to predict stochastic quantum evolution without a priori specifying the rules of quantum theory. Here, we demonstrate that a recurrent neural network can be trained in real time to infer the individual quantum trajectories associated with the evolution of a superconducting qubit under unitary evolution, decoherence, and continuous measurement from physical observations only. The network extracts the system Hamiltonian, measurement operators, and physical parameters. It is also able to perform tomography of an unknown initial state without any prior calibration. This method has the potential to greatly simplify and enhance tasks in quantum systems such as noise characterization, parameter estimation, feedback, and optimization of quantum control.

Quantum bits, or qubits, are an example of coherent circuits envisioned for next-generation computers and detectors. A robust superconducting qubit with a coherent lifetime of $O$(100 $\mu$s) is the transmon: a Josephson junction functioning as a non-linear inductor shunted with a capacitor to form an anharmonic oscillator. In a complex device with many such transmons, precise control over each qubit frequency is often required, and thus variations of the junction area and tunnel barrier thickness must be sufficiently minimized to achieve optimal performance while avoiding spectral overlap between neighboring circuits. Simply transplanting our recipe optimized for single, stand-alone devices to wafer-scale (producing 64, 1x1 cm dies from a 150 mm wafer) initially resulted in global drifts in room-temperature tunneling resistance of $\pm$ 30%. Inferring a critical current $I_{\rm c}$ variation from this resistance distribution, we present an optimized process developed from a systematic 38 wafer study that results in $, Comment: 10 pages, 4 figures. Revision includes supplementary material

Much of modern metrology and communication technology encodes information in electromagnetic waves, typically as an amplitude or phase. Although current hardware can perform near-ideal measurements of photon number or field amplitude, the ability to perform an ideal phase measurement is still lacking, even in principle. In this work, we implement a single-shot canonical phase measurement on a one-photon wave packet, which surpasses the current standard of heterodyne detection and is optimal for single-shot phase estimation. By applying quantum feedback to a Josephson parametric amplifier, our system adaptively changes its measurement basis during photon arrival and allows us to validate the detector’s performance by tracking the quantum state of the photon source. These results demonstrate that quantum feedback can both enhance the precision of a detector and enable it to measure new classes of physical observables. An adaptive heterodyne technique with a Josephson parametric amplifier detector allows a high-precision single-shot canonical phase measurement on a one-photon wave packet, complementing near-ideal measurements of photon number or field amplitude.

We consider the effect of phase backaction on the correlator $\langle I(t)\, I(t+\tau )\rangle$ for the output signal $I(t)$ from continuous measurement of a qubit. We demonstrate that the interplay between informational and phase backactions in the presence of Rabi oscillations can lead to the correlator becoming larger than 1, even though $|\langle I\rangle|\leq 1$. The correlators can be calculated using the generalized "collapse recipe" which we validate using the quantum Bayesian formalism. The recipe can be further generalized to the case of multi-time correlators and arbitrary number of detectors, measuring non-commuting qubit observables. The theory agrees well with experimental results for continuous measurement of a transmon qubit. The experimental correlator exceeds the bound of 1 for a sufficiently large angle between the amplified and informational quadratures, causing the phase backaction. The demonstrated effect can be used to calibrate the quadrature misalignment., Comment: 11 pages, 8 figures

Quantum simulators are a promising technology on the spectrum of quantum devices from specialized quantum experiments to universal quantum computers. These quantum devices utilize entanglement and many-particle behaviors to explore and solve hard scientific, engineering, and computational problems. Rapid development over the last two decades has produced more than 300 quantum simulators in operation worldwide using a wide variety of experimental platforms. Recent advances in several physical architectures promise a golden age of quantum simulators ranging from highly optimized special purpose simulators to flexible programmable devices. These developments have enabled a convergence of ideas drawn from fundamental physics, computer science, and device engineering. They have strong potential to address problems of societal importance, ranging from understanding vital chemical processes, to enabling the design of new materials with enhanced performance, to solving complex computational problems. It is the position of the community, as represented by participants of the NSF workshop on "Programmable Quantum Simulators," that investment in a national quantum simulator program is a high priority in order to accelerate the progress in this field and to result in the first practical applications of quantum machines. Such a program should address two areas of emphasis: (1) support for creating quantum simulator prototypes usable by the broader scientific community, complementary to the present universal quantum computer effort in industry; and (2) support for fundamental research carried out by a blend of multi-investigator, multi-disciplinary collaborations with resources for quantum simulator software, hardware, and education., Comment: 41 pages -- references and acknowledgments added in v2

We investigate quantum error correction using continuous parity measurements to correct bit-flip errors with the three-qubit code. Continuous monitoring of errors brings the benefit of a continuous stream of information, which facilitates passive error tracking in real time. It reduces overhead from the standard gate-based approach that periodically entangles and measures additional ancilla qubits. However, the noisy analog signals from continuous parity measurements mandate more complicated signal processing to interpret syndromes accurately. We analyze the performance of several practical filtering methods for continuous error correction and demonstrate that they are viable alternatives to the standard ancilla-based approach. As an optimal filter, we discuss an unnormalized (linear) Bayesian filter, with improved computational efficiency compared to the related Wonham filter introduced by Mabuchi [New J. Phys. 11, 105044 (2009)]. We compare this optimal continuous filter to two practical variations of the simplest periodic boxcar-averaging-and-thresholding filter, targeting real-time hardware implementations with low-latency circuitry. As variations, we introduce a non-Markovian ``half-boxcar'' filter and a Markovian filter with a second adjustable threshold; these filters eliminate the dominant source of error in the boxcar filter, and compare favorably to the optimal filter. For each filter, we derive analytic results for the decay in average fidelity and verify them with numerical simulations., Comment: 34 pages, 7 figures, published version

We consider the simultaneous and continuous measurement of qubit observables $\sigma_z$ and $\sigma_z\cos\varphi + \sigma_x\sin\varphi$, focusing on the temporal correlations of the two output signals. Using quantum Bayesian theory, we derive analytical expressions for the correlators, which we find to be in very good agreement with experimentally measured output signals. We further discuss how the correlators can be applied to parameter estimation, and use them to infer a small residual qubit Hamiltonian arising from calibration inaccuracy in the experimental data., Comment: 5+11 pages

A crucial limit to measurement efficiencies of superconducting circuits comes from losses involved when coupling to an external quantum amplifier. Here, we realize a device circumventing this problem by directly embedding a two-level artificial atom, comprised of a transmon qubit, within a flux-pumped Josephson parametric amplifier. Surprisingly, this configuration is able to enhance dispersive measurement without exposing the qubit to appreciable excess backaction. This is accomplished by engineering the circuit to permit high-power operation that reduces information loss to unmonitored channels associated with the amplification and squeezing of quantum noise. By mitigating the effects of off-chip losses downstream, the on-chip gain of this device produces end-to-end measurement efficiencies of up to 80 percent. Our theoretical model accurately describes the observed interplay of gain and measurement backaction, and delineates the parameter space for future improvement. The device is compatible with standard fabrication and measurement techniques, and thus provides a route for definitive investigations of fundamental quantum effects and quantum control protocols., 11 pages, 7 figures

We develop a new computational tool and framework for characterizing the scattering of photons by energy-nonconserving Hamiltonians into unidirectional (chiral) waveguides, for example, with coherent pulsed excitation. The temporal waveguide modes are a natural basis for characterizing scattering in quantum optics, and afford a powerful technique based on a coarse discretization of time. This overcomes limitations imposed by singularities in the waveguide-system coupling. Moreover, the integrated discretized equations can be faithfully converted to a continuous-time result by taking the appropriate limit. This approach provides a complete solution to the scattered photon field in the waveguide, and can also be used to track system-waveguide entanglement during evolution. We further develop a direct connection between quantum measurement theory and evolution of the scattered field, demonstrating the correspondence between quantum trajectories and the scattered photon state. Our method is most applicable when the number of photons scattered is known to be small, i.e. for a single-photon or photon-pair source. We illustrate two examples: analytical solutions for short laser pulses scattering off a two-level system and numerically exact solutions for short laser pulses scattering off a spontaneous parametric downconversion (SPDC) or spontaneous four-wave mixing (SFWM) source. Finally, we note that our technique can easily be extended to systems with multiple ground states and generalized scattering problems with both finite photon number input and coherent state drive, potentially enhancing the understanding of, e.g., light-matter entanglement and photon phase gates., Numerical package in collaboration with Ben Bartlett (Stanford University), implemented in QuTiP: The Quantum Toolbox in Python, Quantum 2018

© 2018 authors. Published by the American Physical Society. Published by the American Physical Society under the terms of the https://creativecommons.org/licenses/by/4.0/ Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Harnessing the full power of nascent quantum processors requires the efficient management of a limited number of quantum bits with finite coherent lifetimes. Hybrid algorithms, such as the variational quantum eigensolver (VQE), leverage classical resources to reduce the required number of quantum gates. Experimental demonstrations of VQE have resulted in calculation of Hamiltonian ground states, and a new theoretical approach based on a quantum subspace expansion (QSE) has outlined a procedure for determining excited states that are central to dynamical processes. We use a superconducting-qubit-based processor to apply the QSE approach to the H2 molecule, extracting both ground and excited states without the need for auxiliary qubits or additional minimization. Further, we show that this extended protocol can mitigate the effects of incoherent errors, potentially enabling larger-scale quantum simulations without the need for complex error-correction techniques.

We consider multi-time correlators for output signals from linear detectors, continuously measuring several qubit observables at the same time. Using the quantum Bayesian formalism, we show that for unital (symmetric) evolution in the absence of phase backaction, an $N$-time correlator can be expressed as a product of two-time correlators when $N$ is even. For odd $N$, there is a similar factorization, which also includes a single-time average. Theoretical predictions agree well with experimental results for two detectors, which simultaneously measure non-commuting qubit observables., Comment: 10 pages, 2 figures

Microwave squeezing represents the ultimate sensitivity frontier for superconducting qubit measurement. However, observation of enhancement has remained elusive, in part because integration with conventional dispersive readout pollutes the signal channel with antisqueezed vacuum. Here we induce a stroboscopic light-matter coupling with superior squeezing compatibility, and observe an increase in the room-temperature signal-to-noise ratio of 24%. Squeezing the orthogonal phase controls measurement backaction, slowing dephasing by a factor of 1.8. This protocol enables the practical use of microwave squeezing for qubit state measurement.

Single-mode Josephson junction-based parametric amplifiers are often modeled as perfect amplifiers and squeezers. We show that, in practice, the gain, quantum efficiency, and output field squeezing of these devices are limited by usually neglected higher-order corrections to the idealized model. To arrive at this result, we derive the leading corrections to the lumped-element Josephson parametric amplifier of three common pumping schemes: monochromatic current pump, bichromatic current pump, and monochromatic flux pump. We show that the leading correction for the last two schemes is a single Kerr-type quartic term, while the first scheme contains additional cubic terms. In all cases, we find that the corrections are detrimental to squeezing. In addition, we show that the Kerr correction leads to a strongly phase-dependent reduction of the quantum efficiency of a phase-sensitive measurement. Finally, we quantify the departure from ideal Gaussian character of the filtered output field from numerical calculation of third and fourth order cumulants. Our results show that, while a Gaussian output field is expected for an ideal Josephson parametric amplifier, higher-order corrections lead to non-Gaussian effects which increase with both gain and nonlinearity strength. This theoretical study is complemented by experimental characterization of the output field of a flux-driven Josephson parametric amplifier. In addition to a measurement of the squeezing level of the filtered output field, the Husimi Q-function of the output field is imaged by the use of a deconvolution technique and compared to numerical results. This work establishes nonlinear corrections to the standard degenerate parametric amplifier model as an important contribution to Josephson parametric amplifier's squeezing and noise performance., 21 pages, 13 figures

The quantum Zeno effect is the suppression of Hamiltonian evolution by repeated observation, resulting in the pinning of the state to an eigenstate of the measurement observable. Using measurement only, control of the state can be achieved if the observable is slowly varied such that the state tracks the now time-dependent eigenstate. We demonstrate this using a circuit-QED readout technique that couples to a dynamically controllable observable of a qubit. Continuous monitoring of the measurement record allows us to detect an escape from the eigenstate, thus serving as a built-in form of error detection. We show this by post-selecting on realizations with arbitrarily high fidelity with respect to the target state. Our dynamical measurement operator technique offers a new tool for numerous forms of quantum feedback protocols, including adaptive measurements and rapid state purification.

We present the design and characterization of a multi-qubit circuit for quantum simulation experiments. Using the newly-developed Josephson traveling-wave parametric amplifier, we demonstrate simultaneous, multiplexed, single-shot readout of 8 transmon qubits.

We demonstrate an implementation of the variational quantum eigensolver using superconducting qubits. We explore the algorithm’s ability to go beyond ground state estimation to determine molecular excited states and its inherent robustness to noise.

Quantum Zeno Dynamics is a generalization of the Zeno effect, where the evolution of a quantum system is restricted to a chosen subspace. This allows for coherent preparation of a Bell-state without two-qubit-gates or feedback.

We consider the temporal correlations of the quantum state of a qubit subject to simultaneous continuous measurement of two non-commuting qubit observables. Such qubit state correlators are defined for an ensemble of qubit trajectories, which has the same fixed initial state and can also be optionally constrained by a fixed final state. We develop a stochastic path integral description for the continuous quantum measurement and use it to calculate the considered correlators. Exact analytic results are possible in the case of ideal measurements of equal strength and are also shown to agree with solutions obtained using the Fokker-Planck equation. For a more general case with decoherence effects and inefficiency, we use a diagrammatic approach to find the correlators perturbatively in the quantum efficiency. We also calculate the state correlators for the quantum trajectories which are extracted from readout signals measured in a transmon qubit experiment, by means of the quantum Bayesian state update. We find an excellent agreement between the correlators based on the experimental data and those obtained from our analytical and numerical results., Comment: 12 pages, 4 figures

A central feature of quantum mechanics is that a measurement is intrinsically probabilistic. As a result, continuously monitoring a quantum system will randomly perturb its natural unitary evolution. The ability to control a quantum system in the presence of these fluctuations is of increasing importance in quantum information processing and finds application in fields ranging from nuclear magnetic resonance to chemical synthesis. A detailed understanding of this stochastic evolution is essential for the development of optimized control methods. Here we reconstruct the individual quantum trajectories of a superconducting circuit that evolves in competition between continuous weak measurement and driven unitary evolution. By tracking individual trajectories that evolve between an arbitrary choice of initial and final states we can deduce the most probable path through quantum state space. These pre- and post-selected quantum trajectories also reveal the optimal detector signal in the form of a smooth time-continuous function that connects the desired boundary conditions. Our investigation reveals the rich interplay between measurement dynamics, typically associated with wave function collapse, and unitary evolution of the quantum state as described by the Schrodinger equation. These results and the underlying theory, based on a principle of least action, reveal the optimal route from initial to final states, and may enable new quantum control methods for state steering and information processing., Comment: 12 pages, 9 figures

The direct measurement of topological invariants in both engineered and naturally occurring quantum materials is a key step in classifying quantum phases of matter. Here we motivate a toolbox based on time-dependent quantum walks as a method to digitally simulate single-particle topological band structures. Using a superconducting qubit dispersively coupled to a microwave cavity, we implement two classes of split-step quantum walks and directly measure the topological invariant (winding number) associated with each. The measurement relies upon interference between two components of a cavity Schr\"odinger cat state and highlights a novel refocusing technique which allows for the direct implementation of a digital version of Bloch oscillations. Our scheme can readily be extended to higher dimensions, whereby quantum walk-based simulations can probe topological phases ranging from the quantum spin Hall effect to the Hopf insulator., Comment: 5 pages, 4 figures

The topology of a single-particle band structure plays a fundamental role in understanding a multitude of physical phenomena. Motivated by the connection between quantum walks and such topological band structures, we demonstrate that a simple time-dependent, Bloch-oscillating quantum walk enables the direct measurement of topological invariants. We consider two classes of one-dimensional quantum walks and connect the global phase imprinted on the walker with its refocusing behavior. By disentangling the dynamical and geometric contributions to this phase we describe a general strategy to measure the topological invariant in these quantum walks. As an example, we propose an experimental protocol in a circuit QED architecture where a superconducting transmon qubit plays the role of the coin, while the quantum walk takes place in the phase space of a cavity., Main text: 6 pages, 4 figures; Supplement: 4 pages, 0 figures

We present a systematic study of the effects of shielding on the internal quality factors (Qi) of Al and TiN microwave resonators designed for use in quantum coherent circuits. Measurements were performed in an adiabatic demagnetization refrigerator, where typical magnetic fields of 200 {\mu}T are present at the unshielded sample stage. Radiation shielding consisted of 100 mK and 500 mK Cu cans coated with infrared absorbing epoxy. Magnetic shields consisted of Cryoperm 10 and Sn plating of the Cu cans. A 2.7 K radiation can and coaxial thermalization filters were present in all measurements. TiN samples with Qi = $1.3*10^6$ at 100 mK exhibited no significant variation in quality factor when tested with limited shielding. In contrast, Al resonators showed improved Qi with successive shielding, with the largest gains obtained from the addition of the first radiation and magnetic shields and saturating before the addition of Sn plating infrared absorbing epoxy., Comment: 8 pages, 3 figures

We present an experimental realization of resonance fluorescence in squeezed vacuum. We strongly couple microwave-frequency squeezed light to a superconducting artificial atom and detect the resulting fluorescence with high resolution enabled by a broadband traveling-wave parametric amplifier. We investigate the fluorescence spectra in the weak and strong driving regimes, observing up to 3.1 dB of reduction of the fluorescence linewidth below the ordinary vacuum level and a dramatic dependence of the Mollow triplet spectrum on the relative phase of the driving and squeezed vacuum fields. Our results are in excellent agreement with predictions for spectra produced by a two-level atom in squeezed vacuum [Phys. Rev. Lett. 58, 2539 (1987)], demonstrating that resonance fluorescence offers a resource-efficient means to characterize squeezing in cryogenic environments., United States. Army Research Office (W911NF-14-1-0078), United States. Office of Naval Research (N00014-13-1-0150), United States. Office of the Director of National Intelligence, United States. Intelligence Advanced Research Projects Activity, United States. Air Force (Contract No. FA8721-05-C-0002), United States. Air Force Office of Scientific Research. Multidisciplinary University Research Initiative (Grant No. FA9550-12-1-0488)

Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4–8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.

We describe the implementation of weak quantum measurements in superconducting qubits, focusing specifically on transmon type devices in the circuit quantum electrodynamics architecture. To access this regime, the readout cavity is probed with on average a single microwave photon. Such low-level signals are detected using near quantum-noise-limited superconducting parametric amplifiers. Weak measurements yield partial information about the quantum state, and correspondingly do not completely project the qubit onto an eigenstate. As such, we use the measurement record to either sequentially reconstruct the quantum state at a given time, yielding a quantum trajectory, or to close a direct quantum feedback loop, stabilizing Rabi oscillations indefinitely.

Real-time quantum feedback based on weak measurement of the quantum state is used to stabilize the oscillation phase of a driven quantum bit. By performing weak measurements of a quantum state, it is possible to slow the rate of collapse of its wavefunction, so that information about the quantum state can be gradually acquired. Such information can be used to continuously track and steer the quantum state using feedback. This paper reports quantum feedback control of a superconducting quantum bit (qubit) coupled to a microwave cavity. The qubit undergoes coherent oscillations that can be made to speed up, slow down or persist indefinitely. This ability to actively suppress decoherence could find many applications in quantum error correction, quantum-state stabilization and purification, entanglement generation and adaptive measurements. The act of measurement bridges the quantum and classical worlds by projecting a superposition of possible states into a single (probabilistic) outcome. The timescale of this ‘instantaneous’ process can be stretched using weak measurements1,2, such that it takes the form of a gradual random walk towards a final state. Remarkably, the interim measurement record is sufficient to continuously track and steer the quantum state using feedback3,4,5,6,7,8. Here we implement quantum feedback control in a solid-state system, namely a superconducting quantum bit (qubit) coupled to a microwave cavity9. A weak measurement of the qubit is implemented by probing the cavity with microwave photons, maintaining its average occupation at less than one photon. These photons are then directed to a high-bandwidth, quantum-noise-limited amplifier10,11, which allows real-time monitoring of the state of the cavity (and, hence, that of the qubit) with high fidelity. We demonstrate quantum feedback control by inhibiting the decay of Rabi oscillations, allowing them to persist indefinitely12. Such an ability permits the active suppression of decoherence and enables a method of quantum error correction based on weak continuous measurements13,14. Other applications include quantum state stabilization4,7,15, entanglement generation using measurement16, state purification17 and adaptive measurements18,19.

We observe the quantum Zeno effect -- where the act of measurement slows the rate of quantum state transitions -- in a superconducting qubit using linear circuit quantum electrodynamics readout and a near-quantum-limited following amplifier. Under simultaneous strong measurement and qubit drive, the qubit undergoes a series of quantum jumps between states. These jumps are visible in the experimental measurement record and are analyzed using maximum likelihood estimation to determine qubit transition rates. The observed rates agree with both analytical predictions and numerical simulations. The analysis methods are suitable for processing general noisy random telegraph signals., 15 pages, 8 figures

Amplifiers are crucial in every experiment carrying out a very sensitive measurement. However, they always degrade the information by adding noise. Quantum mechanics puts a limit on how small this degradation can be. Theoretically, the minimum noise energy added by a phase-preserving amplifier to the signal it processes amounts at least to half a photon at the signal frequency. Here we propose a practical microwave device that can fulfil the minimal requirements to reach the quantum limit. The availability of such a device is of importance for the readout of solid-state qubits, and more generally for the measurement of very weak signals in various areas of science. We discuss how this device can be the basic building block for a variety of practical applications, such as amplification, noiseless frequency conversion, dynamic cooling and production of entangled signal pairs. The minimum noise energy that a phase-preserving amplifier adds to the signal is fundamentally limited to half a photon. A proposed parametric amplifier based on Josephson junctions should be able to reach this limit at microwave frequencies.

Graphene exhibits unique electrical properties on account of its reduced dimensionality and neutrino-like "massless Dirac fermion" quasiparticle spectrum. When contacted with two superconducting electrodes, graphene can support Cooper pair transport, resulting in the well-known Josephson effect. The current-phase relation in a ballistic graphene Josephson junction is unique, and could provide a signature for the detection of ballistic Dirac fermions. This relation can be measured experimentally either directly via incorporation of graphene in an RF superconducting quantum interference device (SQUID) or indirectly via a dc-SQUID. We calculate the expected flux modulation of the switching current in the case of the dc-SQUID and compare the results to a previous experiment. Further experiments investigating the current-phase relation in graphene are promising for the observation of ballistic Dirac fermions.

Bath engineering, which utilizes coupling to lossy modes in a quantum system to generate non-trivial steady states, is a tantalizing alternative to gate- and measurement-based quantum science. Here, we demonstrate dissipative stabilization of entanglement between two superconducting transmon qubits in a symmetry-selective manner. We utilize the engineered symmetries of the dissipative environment to stabilize a target Bell state; we further demonstrate suppression of the Bell state of opposite symmetry due to parity selection rules. This implementation is resource-efficient, achieves a steady-state fidelity $\mathcal{F} = 0.70$, and is scalable to multiple qubits.

In this review, we discuss recent experiments that investigate how the quantum sate of a superconducting qubit evolves during measurement. We provide a pedagogical overview of the measurement process, when the qubit is dispersively coupled to a microwave frequency cavity, and the qubit state is encoded in the phase of a microwave tone that probes the cavity. A continuous measurement record is used to reconstruct the individual quantum trajectories of the qubit state, and quantum state tomography is performed to verify that the state has been tracked accurately. Furthermore, we discuss ensembles of trajectories, time-symmetric evolution, two-qubit trajectories, and potential applications in measurement-based quantum error correction.

Author(s): Roch, N; Schwartz, ME; Motzoi, F; Macklin, C; Vijay, R; Eddins, AW; Korotkov, AN; Whaley, KB; Sarovar, M; Siddiqi, I

We engineer a quantum bath that enables entropy and energy exchange with a one-dimensional Bose-Hubbard lattice with attractive on-site interactions. We implement this in an array of three superconducting transmon qubits coupled to a single cavity mode; the transmons represent lattice sites and their excitation quanta embody bosonic particles. Our cooling protocol preserves particle number--realizing a canonical ensemble-- and also affords the efficient preparation of dark states which, due to symmetry, cannot be prepared via coherent drives on the cavity. Furthermore, by applying continuous microwave radiation, we also realize autonomous feedback to indefinitely stabilize particular eigenstates of the array., 5 pages paper, 21 pages supplementary

Stringing together a powerful amplifier Amplifying microwave signals with high gain and across a broad range of frequencies is crucial in solid-state quantum information processing (QIP). Achieving broadband operation is especially tricky. Macklin et al. engineered an amplifier that contains a long chain of so-called Josephson junctions (see the Perspective by Cleland). The amplifier exhibited high gain over a gigahertz-sized bandwidth and was able to perform high-fidelity qubit readout. Because the amplifier will be capable of reading out as many as 20 qubits simultaneously, it may help to scale up QIP protocols. Science , this issue p. 307 ; see also p. 280

We propose a technique to phase-match Josephson-junction traveling wave parametric amplifiers to achieve high gain (over twenty decibels) over a broad bandwidth (multiple GHz) for applications such as the multiplexed readout of quantum coherent circuits.

We present a thermometer based on the electrical noise from a tunnel junction. In this thermometer, temperature is related to the voltage across the junction by a relative noise measurement with only the use of the electron charge, Boltzmann's constant, and assumption that electrons in a metal obey Fermi-Dirac statistics. We demonstrate proof-of-concept operation of this primary thermometer over four orders of magnitude in temperature, with as high as 0.1% accuracy and 0.02% precision in the range near 1 kelvin. The self-calibrating nature of this sensor allows for a much faster and simpler measurement than traditional Johnson noise thermometry, making it potentially attractive for metrology and for general use in cryogenic systems.

We propose a technique to overcome phase mismatch in Josephson-junction traveling wave parametric amplifiers in order to achieve high gain over a broad bandwidth. Using ``resonant phase matching,'' we design a compact superconducting device consisting of a transmission line with subwavelength resonant inclusions that simultaneously achieves a gain of 20 dB, an instantaneous bandwidth of 3 GHz, and a saturation power of $\ensuremath{-}98\text{ }\text{ }\mathrm{dBm}$. Such an amplifier is well suited to cryogenic broadband microwave measurements such as the multiplexed readout of quantum coherent circuits based on superconducting, semiconducting, or nanomechanical elements, as well as traditional astronomical detectors.

Nitrogen-vacancy (NV) centers in nanodiamond (ND) particles are an attractive material for photonic, quantum information, and biological sensing technologies due to their optical properties-bright single photon emission and long spin coherence time. To harness these features in practical devices, it is essential to realize efficient methods to assemble and pattern NDs at the micro-/nanoscale. In this work, we report the large scale patterned assembly of NDs on a Au surface by creating hydrophobic and hydrophilic regions using self-assembled monolayer (SAM). Hydrophobic regions are created using a methyl (-CH3) terminated SAM of octadecanethiol molecules. Evaporating a water droplet suspension of NDs on the SAM patterned surface assembles the NDs in the bare Au, hydrophilic regions. Using this procedure, we successfully produced a ND structures in the shape of dots, lines, and rectangles. Subsequent photoluminescence imaging of the patterned NDs confirmed the presence of optically active NV centers. Experimental evidence in conjunction with computational analysis indicates that the surface wettability of the SAM modified Au surface plays a dominant role in the assembly of NDs as compared to van der Waals and other substrate-ND interactions.

The creation of a quantum network requires the distribution of coherent information across macroscopic distances. We demonstrate the entanglement of two superconducting qubits, separated by more than a meter of coaxial cable, by designing a joint measurement that probabilistically projects onto an entangled state. By using a continuous measurement scheme, we are further able to observe single quantum trajectories of the joint two-qubit state, confirming the validity of the quantum Bayesian formalism for a cascaded system. Our results allow us to resolve the dynamics of continuous projection onto the entangled manifold, in quantitative agreement with theory., Supplemental material added and minor corrections

We monitor the quantum trajectory of a superconducting qubit as it evolves under a continuous weak measurement. We verify the trajectory using quantum state tomography and investigate statistical properties of ensembles of trajectories.