Search

A new accurate determination of beta-delayed neutron emission probabilities from nuclei in the low mass region of the light fission group has been performed. The measurements were carried out using the BELEN 4π neutron counter at the IGISOL-JYFL mass separator in combination with a Penning trap. The new results significantly improve the uncertainties of neutron emission probabilities for {sup 91}Br, {sup 86}As, {sup 85}As, and {sup 85}Ge nuclei.

A new method for determining independent fission products is used in an experiment at the Accelerator Laboratory of the University of Jyvaskyla. The method combines the chemical universality of the ion guide technique and the unique properties of the Penning trap. A beam of charged particles is formed by stopping fission products in gaseous helium. The Penning trap is employed as a highly accurate filter to identify particles by their mass. The yields of fission products are determined by the ion count downstream of the trap. The setup’s mass resolving power is on the order of 105 with a radio frequency excitation time of 400 ms. Such high mass resolution occasionally allows us not only to separate nuclides but to separate the isomeric and ground states of nuclei as well. Independent yields of fission products are measured in the fission reaction of the 232Th isotope by protons with an energy of 25 MeV. A short description of the method ae nd soexperimental data are supplememnted by the results fro theoretical calculations.

The Ion Guide Isotope Separator On-Line facility at the Accelerator Laboratory of the University of Jyvaskyla is currently being re-commissioned as IGISOL-4 in a new experimental hall. Access to intense beams of protons and deuterons from a new MCC30/15 cyclotron, with continued possibility to deliver heavy-ion beams from the K = 130 MeV cyclotron, offers extensive opportunities for long periods of fundamental experimental research, developments and applications. A new layout of beam lines with a considerable increase in floor space offers new modes of operation at the facility, as well as a possibility to incorporate more complex detector setups. We present a general overview of IGISOL-4 and the current status of several projects, including the collinear laser spectroscopy station and the future of neutron-induced fission. Recent milestones from the first commissioning experiments are presented.

International audience

V. Guadilla et al. -- 4 pags., 6 figs. -- Open Access funded by Creative Commons Atribution Licence 4.0, In this work we report on total absorption ¿-ray spectroscopy measurements of the ß decay of fission products that are important contributors to the antineutrino spectrum. The experiment was performed at IGISOL as a part of a campaign of measurements with the new DTAS spectrometer. Preliminary results of the analysis of the ß decay of 100Nb,100mNb and 140Cs are presented., This work has been supported by the Spanish Ministerio de Economía y Competitividad under the FPA2011-24553, the AIC-A-2011-0696, the FPA2014-52823-C2-1-P and the SEV- 2014-0398 Grants, by the European Commission under the FP7/EURATOM contract 605203, and by the Spanish Ministerio de Educación under the FPU12/01527 Grant.

International audience; The accurate determination of reactor antineutrino spectra remains a very active research topic for which new methods of study have emerged in recent years. Indeed, following the long-recognized reactor anomaly (measured antineutrino deficit in short baseline reactor experiments when compared with spectral predictions), the three international reactor neutrino experiments Double Chooz, Daya Bay and Reno have recently demonstrated the existence of spectral distortions in their measurements with respect to the same predictions. These spectral predictions were obtained through the conversion of integral beta-energy spectra obtained at the ILL research reactor. Several studies have shown that the underlying nuclear physics required for the conversion of these spectra into antineutrino spectra is not totally understood. An alternative to such converted spectra is a complementary approach that consists of determining the antineutrino spectrum by means of the measurement and processing of nuclear data. The beta properties of some key fission products suffer from the pandemonium effect which can be circumvented by the use of the Total Absorption Gamma-ray Spectroscopy technique (TAGS). The two main contributors to the Pressurized Water Reactor antineutrino spectrum in the region where the spectral distortion has been observed are 92Rb and 142Cs, which have been measured at the radioactive beam facility of the University of Jyväskylä in two TAGS experiments. We present the results of the analysis of the TAGS measurements of the β-decay properties of 92Rb along with preliminary results on 142Cs and report on the measurements already performed.

A new detection system for the measurement of beta-delayed neutron emission probabilities has been characterized using fission products with well known β-delayed neutron emission properties. The setup consists of BELEN-20, a 4π neutron counter with twenty 3He proportional tubes arranged inside a large polyethylene neutron moderator, a thin Si detector for β counting and a self-triggering digital data acquisition system. The use of delayed-neutron precursors with different neutron emission windows allowed the study of the effect of energy dependency on neutron, β and β–neutron rates. The observed effect is well reproduced by Monte Carlo simulations. The impact of this dependency on the accuracy of neutron emission probabilities is discussed. A new accurate value of the neutron emission probability for the important delayed-neutron precursor 137I was obtained, P n = 7.76 ( 14 ) %.

The fission product yields are an important characteristic of the fission process. In fundamental physics, knowledge of the yield distributions is needed to better understand the fission process. For nuclear energy applications good knowledge of neutroninduced fission-product yields is important for the safe and efficient operation of nuclear power plants. With the Ion Guide Isotope Separator On-Line (IGISOL) technique, products of nuclear reactions are stopped in a buffer gas and then extracted and separated by mass. Thanks to the high resolving power of the JYFLTRAP Penning trap, at University of Jyväskylä, fission products can be isobarically separated, making it possible to measure relative independent fission yields. In some cases it is even possible to resolve isomeric states from the ground state, permitting measurements of isomeric yield ratios. So far the reactions U(p,f) and Th(p,f) have been studied using the IGISOL-JYFLTRAP facility. Recently, a neutron converter target has been developed utilizing the Be(p,xn) reaction. We here present the IGISOL-technique for fission yield measurements and some of the results from the measurements on proton induced fission. We also present the development of the neutron converter target, the characterization of the neutron field and the first tests with neutron-induced fission. peerReviewed

A small volume cryogenic ion guide has been characterized at the IGISOL facility, Jyvaskyla, as a prototype to verify whether there are any major obstacles to the use of high-density cryogenic helium gas for the stopping and extraction of high-energy ions from a large volume cryogenic ion catcher. The expected temperature scaling of the mass flow through the ion guide has been confirmed, showing that for the same helium density, the differential pumping requirements are less stringent for cryogenic operation. At 90 K a clear reduction in the mass-analyzed impurities is achieved, although lower temperatures are required to freeze out oxygen and nitrogen. This is supported by the reduction in the measured secondary beam current exiting the ion guide in the presence of primary beam. Despite this reduction, the activity of Na-20 (t(1/2) = 446 ms) at primary beam intensities above 1 mu A is rather similar to that achieved at room temperature. A constant extraction efficiency of a beam of Ni-58(+) ions, with initial energy 340 MeV, spanned approximately five orders of magnitude of ionization-rate density. In summary, the cryogenic ion guide is a promising new tool to support the improvement of low-energy beam production at the IGISOL-4 facility which is expected to be operational in 2012. (C) 2012 Elsevier B.V. All rights reserved.

UNLABELLED The progress in computer technology and the increased use of finite element analysis in the medical field by nonengineers and medical researchers lead us to believe that there is a need to develop a systematic approach to validate a finite element model (FEM), of a human orbit, that simulates part of the maxillofacial skeleton and to investigate the effects and the clinical significance of changing the geometry, boundary conditions, that is, muscle forces, and orthotropic material properties on the predictive outcome of an FEM of a human orbit. METHODS Forty-seven variables affecting the material properties, boundary conditions, and the geometry of an FEM of a human orbit including the globe were systematically changed, creating a number of FEMs of the orbit. The effects of the variations were quantified as differences in the principal strain magnitudes modeled by the original FEM (criterion standard), before the sensitivity analyses, and those generated by the changed FEMs. RESULTS The material properties that had the biggest impact on the predicted principal strains were the shear moduli (up to 21%) and the absence of fatty tissue (up to 75%). The boundary condition properties that had the biggest impact on the predicted principal strains were the superior rectus muscle and canthal ligaments (up to 18% and 23%, respectively). Alterations to the geometry of the orbit, such as an increase in its volume, had the greatest effect on principal strain magnitudes (up to 52%). CONCLUSIONS Changes in geometry, boundary conditions, and orthotropic material properties can induce significant changes in strain patterns. These values must therefore be chosen with care when using finite element modeling techniques. This study also highlights the importance of restoring the orbital fat and volume when reconstructing the orbital floor following a blunt injury. The possibility that the unrestored increase in the orbital volume and the resulting stresses may be a source of globe injuries, causing diplopia, cannot be excluded.

The energy associated with the decay of fission products plays an important role in the estimation of the amount of heat released by nuclear fuel in reactors. In this article we present results of the study of the beta decay of some refractory isotopes that were considered important contributors to the decay heat in reactors. The measurements were performed at the IGISOL facility of the University of Jyvaskyla, Finland. In these studies we have combined for the first time a Penning trap (JYFLTRAP), which was used as a high resolution isobaric separator, with a total absorption spectrometer. The results of the measurements as well as their consequences for decay heat summation calculations are discussed.

The front end of the IGISOL facility was upgraded in 2003 by increasing its pumping capacity and by improving the radiation shielding. This marked the birth of IGISOL 3. In late 2005, the traditional conical skimmer electrode of the mass separator was permanently replaced by a radiofrequency sextupole ion beam guide, SPIG, which further improved the mass separator efficiency almost an order of magnitude. The IGISOL 3 facility is described here such as it appeared after all the improvements had been installed.

The front end of the IGISOL facility was upgraded in 2003 by increasing its pumping capacity and by improving the radiation shielding. This marked the birth of IGISOL 3. In late 2005, the traditional conical skimmer electrode of the mass separator was permanently replaced by a radiofrequency sextupole ion beam guide, SPIG, which further improved the mass separator efficiency almost an order of magnitude. The IGISOL 3 facility is described here such as it appeared after all the improvements had been installed.

We review the present and future of trap-assisted structure studies of odd, neutron-rich Tc, Ru, Rh and Pd isotopes at the limits of present experimental techniques. These nuclei of refractory elements are produced in light-particle induced fission and filtered by their mass number with the IGISOL mass separator. Further mass separation with the JYFLTRAP Penning trap system provides a clean, monoisotopic beam perfectly suited for precise nuclear spectroscopy. Connecting the IGISOL and the JYFLTRAP facilities to the recently installed MCC30/15 cyclotron opens new prospects for post-trap spectroscopy of very exotic, neutron-rich nuclei. peerReviewed

The decay heat of fission products plays an important role in predictions of the heat released by nuclear fuel in reactors. In this contribution we present results of the analysis of the measurement of the beta decay of some refractory isotopes that were considered possible important contributors to the decay heat in reactors. The measurements presented here were performed at the IGISOL facility of the University of Jyvaeskylae, Finland. In our measurements we have combined for the first time a Penning trap (JYFLTRAP), which was used as a high resolution isobaric separator, with a total absorption spectrometer. The results of the measurements as well as their consequences for decay heat summation calculations are discussed.

Purpose: To develop a finite element model (FEM) to study the effect of the vascular wall compliance on blood flow at the graft/recipient vessel junction. Materials and Methods: Finite element models of the end-to-end and end-to-side anastomoses were constructed. Simulations were performed with a computer using the finite element software NISA. The FEMs were then used to study the effects of changing the elasticity of the vascular wall on its predictions. Results: Deformations were relatively large; the maximum displacement for the compliant model, end-to-end anastomosis, was 55 and 88 mm for the 90-degree end-to-side anastomosis. The maximum displacement for the rigid model, end-to-end anastomosis, was 155 and 188 mm for the 90-degree end-to-side anastomosis. When the angle of inset was set at 45 degrees, there was no remarkable difference in deformation between the compliant and rigid models. Conclusions: The principal stresses were remarkably less at the graft/vessel junction in models of compliant grafts and compliant vessels than for rigid wall models. The 45-degree end-to-side anastomosis seems to be the best technique when planning microvascular anastomosis for elderly patients and/or patients with systemic disease, which reduces vascular wall elasticity.

β-delayed neutron (DN) data, including emission probabilities, Pn, and energy spectrum, play an important role in our understanding of nuclear structure, nuclear astrophysics and nuclear technologies. A MOdular Neutron time-of-flight SpectromeTER (MONSTER) is being built for the measurement of the neutron energy spectra and branching ratios. The TOF spectrometer will consist of one hundred liquid scintillator cells covering a significant solid angle. The MONSTER design has been optimized by using Monte Carlo (MC) techniques. The response function of the MONSTER cell has been characterized with mono-energetic neutron beams and compared to dedicated MC simulations.

A novel method to determine independent yields in particle-induced fission employing the ion guide technique and ion counting after a Penning trap has been developed. The method takes advantage of the fact that a Penning trap can be used as a precision mass filter, which allows an unambiguous identification of the fission fragments. The method was tested with 25MeV and 50MeV proton-induced fission of 238U . The data is internally reproducible with an accuracy of a few per cent. A satisfactory agreement was obtained with older ion guide yield measurements in 25MeV proton-induced fission. The results for Rb and Cs yields in 50MeV proton-induced fission agree with previous measurements performed at an isotope separator equipped with a chemically selective ion source.

A Penning trap-based purification process having a resolution of about 1 ppm is reported. In this context, we present for the first time a production method for the most complicated and crucially important nuclear weapons test signature, 133mXe. These pure xenon samples are required by the Comprehensive Nuclear-Test-Ban Treaty Organization to standardize and calibrate the worldwide network of xenon detectors.

We have investigated the survival and transport efficiency of Ra-219 ions emitted by a Ra-223 source in high-density cryogenic helium gas, with ionisation of the gas induced by a proton beam. The combined efficiency of ion survival and transport by an applied electric field was measured as a function of ionisation rate density for electric fields up to 160 V/cm and for three temperature and density combinations: 77 K, 0.18 mg/cm(3), 10 K, 0.18 mg/cm(3) and 10 K, 0.54 mg/cm(3). At low beam intensity or high electric field, an efficiency of 30%, is obtained, confirming earlier results. A sharp drop in efficiency is observed at a "threshold" ionisation rate density which increases with the square of the applied electric field. At 160 V/cm, the efficiency stays above 10% up to an ionisation rate density of 10(12) ion-electron pairs/cm(3)/s. The observed behaviour is understood as the result of shielding of the applied field by the weak plasma created by the proton beam: it counteracts the effective transport of ions and electrons, leading to recombination between the two. We conclude that cryogenic helium gas at high-density and high electric field is a promising medium for the transformation of very high-energy ions into low-energy ones. (c) 2008 Elsevier B.V. All rights reserved.

A future study of the ground state and low-lying isomeric states of 94 Ag and 96 Ag at the Ion Guide Isotope Separator On-Line (IGISOL) facility, University of Jyvaskyla, requires the development of a low-energy beam of neutron-deficient silver. In order to attain the highest possible extraction efficiencies the coupling of a hot cavity graphite catcher device to the IGISOL mass-separator is planned. A heavy-ion fusion-evaporation reaction will produce the silver recoils which will be captured in the graphite catcher. Resonant laser ionization techniques will be applied to efficiently and selectively ionize the evaporated silver atoms. A simulation program has been written to study the energy and emittance of the recoils in order to optimize the capture geometry. The off-line development of a laser ionization scheme is discussed and the first results of a performance test of the hot cavity with beam on target are given.

The front end of the Jyvaskyla IGISOL facility was upgraded in 2003 by increasing its pumping capacity and by improving the radiation shielding. In late 2005, the skimmer electrode of the mass separator was replaced by a sextupole ion guide, which improved the mass separator efficiency up to an order of magnitude. The current design of the facility is described. The updated yield data, achieved with and without the additional JYFLTRAP purification, using both fusion evaporation reactions and particle induced fission is presented to give an overview of the capability of the facility. These data have been determined either by radioactivity measurements or by direct ion counting after the Penning trap system.

In retrospective radon measurements, the 22-y half life of (210)Pb is used as an advantage. (210)Pb is often considered to be relatively immobile in glass after alpha recoil implanted by (222)Rn progenies. The diffusion of (210)Pb could, however, lead to uncertain wrong retrospective radon exposure estimations if (210)Pb is mobile and can escape from glass, or lost as a result of cleaning-induced surface modification. This diffusion was studied by a radiotracer technique, where (209)Pb was used as a tracer in a glass matrix for which the elemental composition is known. Using the ion guide isotope separator on-line technique, the (209)Pb atoms were implanted into the glass with an energy of 39 keV. The diffusion profiles and the diffusion coefficients were determined after annealing at 470-620 degrees C and serial sectioning by ion sputtering. In addition, the effect of surface cleaning on diffusion was tested. From the Arrhenius fit, the activation enthalpy (H) was determined, which is equal to 3.2 +/- 0.2 eV, and also the pre-exponential factor D(0), in the order of 20 m(2)s(-1). This result confirms the assumption that over a time period of 50 y (209)Pb (and (210)Pb) is effectively immobile in the glass. The boundary condition obtained from the measurements had the characteristic of a sink, implying loss of (209)Pb in the topmost surface at high temperatures.

In this report, we describe a 1-stage zygomaticomandibular composite flap for improved access to the retromaxillary space and the base of the skull. The zygoma and the mandible were not detached from the facial musculature or from its overlying tissues, maintaining an optimum bone-soft tissue relationship. The advantage of this approach was the enhanced exposure of the deep lesion, which provided a shorter and wider view to the maxilla, the retromaxillary space, and the base of the skull. Restoration of the skeletal symmetry and the three-dimensional contour of the maxilla was greatly enhanced by using preadapted plates and a stereolithographic model. To the best of our knowledge, no references were found in the literature regarding the use of the same technique for treating defects of similar nature to those described in this article. The deep circumflex iliac artery flap was used to reconstruct the midfacial defect and the base of the skull. The use of the flap provided optimum results because the defect was closed with the muscle that became epithelialized with minimal bulk.

Various alternative models were used to describe the structure of 106Ru . For example, the General Collective Model (GCM) predicts shape-coexistence for 106Ru with a spherical and a triaxial minimum and strongly mixed structures, while in the IBA-2 calculations, where 106Ru was considered as transitional from vibrational U(5) to γ -soft O(6) , no need was found to include the shape-coexisting configurations. In order to provide additional constraints on the model interpretations, we have applied the Advanced Time-Delayed (ATD) βγγ(t) method to measure the level lifetimes of the excited levels in 106Ru . The new results include the half-lives of T 1/2 = 183(3) ps and 7.5(30)ps for the 2+ 1 and 2+ 2 states, respectively.

The Penning trap mass spectrometer JYFLTRAP, coupled to the Ion Guide Isotope Separator On-Line (IGISOL) facility at Jyvaskyla, was employed to measure the atomic masses of neutron-rich 70-73Ni and 73, 75Cu isotopes with a typical accuracy less than 5keV. The mass of 73Ni was measured for the first time. Comparisons with the previous data are discussed. Two-neutron separation energies show a weak subshell closure at 68 28Ni40 . A well established proton shell gap is observed at Z = 28 .

The 113Ru and 113Rh nuclei, produced in the spontaneous fission of 248Cm and in proton-induced fission of 238U , were studied by means of prompt gamma spectroscopy using the EUROGAM 2 array of Anti-Compton spectrometers and the IGISOL mass separator, respectively. For the 0.5s isomer, found in 113Ru in our recent study we propose the 7/2-[523] configuration. The present data indicate spin and parity 1/2+ for the ground state in 113Ru . This and some new data on the excited levels in 113Rh allows reinterpretation and a better understanding of the β- {} decay scheme of 113Ru . The properties of 113Ru were studied in the frame of the Core-Quasiparticle Coupling model, which has well reproduced the experimental data.

The purpose of this study was to evaluate biomechanical loading of the temporomandibular joint when using a biodegradable laminate implant to replace the articular disc and to test the hypothesis that the use of the implant reduces stress distribution in the condyle, implant, and glenoid fossa. A finite element model of a female human mandible, including the temporomandibular joint, which had two standard endosseous implants inserted bilaterally in the premolar region, was constructed from computed tomography scan images using a commercially available finite element software. The disc, condyle, and glenoid fossa were arbitrarily divided into five regions: the anterior, posterior, medial, lateral, and central. The disc was then replaced with a poly-L/DL-lactide biodegradable laminate. The finite element model was then used to predict principal and Von Mises stresses. The use of poly-L/DL-lactide implant resulted in remarkable reduction in Von Mises stresses (approximately threefold) in the anterior, central, and medial regions of the mandibular condyle in comparison with slight to moderate stress reductions in the corresponding regions of the implant and glenoid fossa. The mandibular condyle also demonstrated the largest total displacement in all directions followed by the implant and glenoid fossa. The use of an alloplastic implant such as the bioresorbable, poly-L/DL-lactide laminate to replace the articular disc reduces loading of the mandibular condyle rather than the implant and glenoid fossa. These findings lead to support the hypothesis that the mandibular condyle more likely functions as a shock absorber than the disc. The use of bioresorbable laminate implants might prove an efficient technique to replace the articular disc and promote normal function of the temporomandibular joint.

Angular and energy distributions of neutrons produced by the interaction of protons of 20, 25 and 40 MeV in 13C targets, in which they are stopped, have been measured by time-of-flight and activation methods. Neutron yields are compared with a Monte-Carlo based model prediction and with the experimental neutron yields of proton and deuteron beams impinging on natural carbon thick targets. The gain with respect to p + 12C is only sizeable at the lowest proton energies. The neutron yield curve of p + 13C versus proton energy is definitely lower than the one of d + 12C, in contrast to the suggestion by an earlier published measurement at 30 MeV.

Purpose of the study To develop a finite element model (FEM) to study the effect of the stress and strain, in microvascular anastomoses that result from the geometrical mismatch of anastomosed vessels. Material and methods FEMs of end-to-end and end-to-side anastomoses were constructed. Simulations were made using finite element software (NISA). We investigated the angle of inset in the end-to-side anastomosis and the discrepancy in the size of the opening in the vessel between the host and recipient vessels. The FEMs were used to predict principal and shear stress and strain at the position of each node. Results Two types of vascular deformation were predicted during different simulations: longitudinal distortion, and rotational distortion. Stress values ranged from 151.1 to 282.4 MPa for the maximum principal stress, from −122.9 to −432.2 MPa for the minimum principal stress, and from 122.1 to 333.1 MPa for the maximum shear stress. The highest values were recorded when there was a 50% mismatch in the diameter of the vessels at the site of the end-to-end anastomosis. Conclusion The effect of the vessel's size discrepancy on the blood flow and deformation was remarkable in the end-to-end anastomosis. End-to-side anastomosis was superior to end-to-end anastomosis. FEM is a powerful tool to study vascular deformation, as it predicts deformation and biomechanical processes at sites where physical measurements are likely to remain impossible in living humans.

Exotic, neutron-rich 111Mo and 115Ru nuclei, produced in proton-induced fission of 238U target, were separated with the IGISOL mass separator. The separator was coupled to the JYFLTRAP Penning trap to select the ions of a single, desired element out of the isobaric IGISOL beam. Monoisotopic samples of 115Ru and 111Mo ions were observed with a microchannel plate detector after the trap or were implanted on a catcher foil for gamma- and beta-ray coincidence spectroscopy. In spite of short data taking time new gamma transitions were identified in the beta decay of very neutron-rich 115Ru.

We report changes in mean-square charge radii, δ 〈 r 2 〉 , magnetic moments and quadrupole moments for three multi-quasi particle isomers; 97m2Y, 176mYb and 178m1Hf. All the isomers are observed to display a decrease in 〈 r 2 〉 compared to the lower-lying nuclear state on which the isomer is built. The decreases in 〈 r 2 〉 occur despite the isomers showing increases in quadrupole moment. Possible mechanisms for the effect, which is now seen for six multi-quasi particle isomers, are discussed.

A new technique to produce isobarically pure ion beams for decay spectroscopy by using a gas-filled Penning trap was commissioned at the ion guide isotope separator on-line facility, IGISOL. β-decays of neutron-rich 100Zr, 102Zr and 104Zr isotopes were studied with this technique. In addition, the $\ensuremath Q_{\beta^{-}}$ values of 100,102,104Zr β-decays were determined from the direct mass measurements of zirconium and niobium isotopes performed with a high-precision Penning trap. The mass of 104Nb was directly measured for the first time and the obtained mass excess value for the longer-living (1+) state is -71823±10 keV. For the ground states of 100Nb and 102Nb the obtained mass excess values were -79802±20 keV and -76309±10 keV, respectively. The observed distribution of the β strength supports a prolate deformation assignment for 100,102,104Zr isotopes.

Several new subnanosecond lifetimes were measured in Pd-109 using the fast-timing beta gamma gamma (t) method. Fission fragments of the A = 109 mass chain were produced by bombarding natural uranium with 30 MeV protons at the Jyvaskyla Ion Guide Isotope Separator On-Line (IGISOL) facility. Lifetimes were obtained for excited states in Pd-109 populated following beta decay of Rh-109. The new lifetimes provide some insight into the evolution of nuclear structure in this mass region. In particular, the distinct structure of the two low-lying 7/2(+) states occurring systematically across the Pd isotopic chain is supported by the new lifetime measurements. The available nuclear data indicate a sudden increase in deformation at N = 60 which is related to the strong p-n interaction between pi g(9/2) and vg(7/2) valence nucleons expected in this region.

The antineutrino spectra measured in recent experiments at reactors are inconsistent with calculations based on the conversion of integral beta spectra recorded at the ILL reactor. (92)Rb makes the dominant contribution to the reactor antineutrino spectrum in the 5-8 MeV range but its decay properties are in question. We have studied (92)Rb decay with total absorption spectroscopy. Previously unobserved beta feeding was seen in the 4.5-5.5 region and the GS to GS feeding was found to be 87.5(25)%. The impact on the reactor antineutrino spectra calculated with the summation method is shown and discussed.

Total absorption spectroscopy is used to investigate the β-decay intensity to states above the neutron separation energy followed by γ-ray emission in (87,88)Br and (94)Rb. Accurate results are obtained thanks to a careful control of systematic errors. An unexpectedly large γ intensity is observed in all three cases extending well beyond the excitation energy region where neutron penetration is hindered by low neutron energy. The γ branching as a function of excitation energy is compared to Hauser-Feshbach model calculations. For (87)Br and (88)Br the γ branching reaches 57% and 20%, respectively, and could be explained as a nuclear structure effect. Some of the states populated in the daughter can only decay through the emission of a large orbital angular momentum neutron with a strongly reduced barrier penetrability. In the case of neutron-rich (94)Rb the observed 4.5% branching is much larger than the calculations performed with standard nuclear statistical model parameters, even after proper correction for fluctuation effects on individual transition widths. The difference can be reconciled by introducing an enhancement of 1 order of magnitude in the photon strength to neutron strength ratio. An increase in the photon strength function of such magnitude for very neutron-rich nuclei, if it proves to be correct, leads to a similar increase in the (n,γ) cross section that would have an impact on r process abundance calculations.

At the Jyvaskyla Ion Guide Isotope Separator On-Line (IGISOL) facility, independent fission yields are measured employing the Penning-trap technique. Fission products are produced, e.g. by impinging protons on a uranium target, and are stopped in a gas-filled chamber. The products are collected by a flow of He gas and guided through a mass separator to a Penning trap, where their masses are identified. This work investigates how fission-product properties, such as mass and energy, affect the ion stopping efficiency in the gas cell. The study was performed using the Geant4 toolkit and the SRIM code. The main results show a nearly mass-independent ion stopping with regard to the wide spread of ion masses and energies, with a proper choice of uranium target thickness. Although small variations were observed, in the order of 5%, the results are within the systematic uncertainties of the simulations. To optimize the stopping efficiency while reducing the systematic errors, different experimental parameters were varied; for instance material thicknesses and He gas pressure. Different parameters influence the mass dependence and could alter the mass dependencies in the ion stopping efficiency.

V. Guadilla et al. ; 4 págs.; 4 figs.; 1 tab., The new Decay Total Absorption Spectrometer (DTAS) has been commissioned with low energy radioactive beams at the upgraded IGISOL IV facility. The DTAS is a segmented detector composed of up to 18 NaI(Tl) crystals and it will be a key instrument in the DESPEC experiment at FAIR. In this document we report on the experimental setup and the first measurements performed with DTAS at IGISOL. The detector was characterized by means of MC simulations, and this allowed us to calculate the response function of the spectrometer and analyse the first cases of interest. 2015 Elsevier B.V. All rights reserved., This work has been supported by the Spanish Ministerio de Economía y Competitividad – Spain under the FPA2011-24553, the AIC-A-2011-0696, the FPA2014-52823-C2-1-P and the SEV-2014-0398 Grants, by the European Commission – Belgium under the FP7/EURATOM contract 605203, and by the Spanish Ministerio de Educación – Spain under the FPU program.

The masses of 80, 81, 82, 83Y, 83, 84, 85, 86, 88Zr and 85, 86, 87, 88Nb have been measured with a typical precision of 7keV by using the Penning trap setup at IGISOL. The mass of 84Zr has been measured for the first time. These precise mass measurements have improved Sp and QEC values for astrophysically important nuclides.

In recent years there has been increasing interest in radio-epidemiological techniques to retrospectively measure the radon dose exposure by determining the activity of 210Pb, the longest-lived 222Rn progeny, in glass surface layers. In this study the diffusion of 39 keV 209Pb+ ions implanted into glass using the IGISOL facility has been studied under conditions that mimic the recoil implantation of 210Pb from 222Rn. The resulting depth distributions of 209Pb were then measured after heat treatment in vacuum at different temperatures by a sputter erosion technique. The diffusion coefficient could be described by an Arrhenius equation D = D0exp(−H/kT) where D 0 = 0.30 - 0.24 + 1.14 m 2 s - 1 and H = 2.81 ± 0.11 eV. No statistically significant loss of 209Pb from the sample was observed for annealing between 470 and 600 °C.

Collinear laser spectroscopy experiments on the ScII transition 3d4s 3D2→3d4p 3F3 at λ≈363.1 nm were performed on the 42–46Sc isotopic chain using an ion guide isotope separator with a cooler-buncher. Isotope and isomer shifts and hyperfine structures of five ground states and two isomers were measured. Preliminary results on the nuclear moments and charge radii changes deduced from these measurements are reported.

Cooling and trapping techniques of low-energy radioactive ion beams of refractory elements employed at the IGISOL facility are presented with emphasis on high-precision measurements of the ground state properties of exotic nuclei. The impact of the new generation Paul and Penning traps on mass measurements of short-lived nuclei is discussed with examples on precision measurements of masses of super-allowed beta emitters and neutron-rich nuclei. As a new concept the trap-assisted spectroscopy of radioactive ions is presented with applications in collinear laser spectroscopy, decay spectroscopy of isobarically purified sources and in nuclear cross-section measurements by ion counting.

The application of laser ionisation is being developed for the IGISOL mass separator facility in Jyvaskyla, Finland. The conceived laser ion source will have two independent pulsed laser systems based on all solid-state lasers and dye lasers for maximal coverage of ionisation schemes throughout the periodic table. A laser ion source trap, LIST, method will be pursued for optimal selectivity.

Central intraosseous adenoid cystic carcinoma (ACC) of the mandible, formerly known as cylindroma, is a rare neoplasm with only 16 cases reported in the literature. We describe the diagnosis, etiology, and treatment of a central ACC located in the mandibular premolar region. We also review the literature. This case illustrates 2 key facts regarding the diagnosis and etiology of ACC. First, central salivary gland tumors should be considered in the differential diagnosis of cystic lytic lesions in the mandible. Second, even though the origin of this type of tumor is still unknown, the presence of ectopic tissue anterior to the submandibular gland in the submandibular area indicates that this tumor might be made up of ectopic embryogenic inclusions.

Conventionally, reaction rates relevant to nova nucleosynthesis are determined by performing the relevant proton capture reactions directly for stable species, or as has become possible more recently in inverse kinematics using short-lived accelerated radioactive beams with recoil separators. A secondary approach is to compile information on the properties of levels in the Gamow window using transfer reactions. We present a complementary technique where the states of interest are populated in a heavy-ion fusion reaction and their gamma decay studied with a state-of-the-art array of high-purity germanium detectors. The advantages of this approach, including the ability to determine resonance energies with high precision and the possibility of determining spins and parities from gamma-ray angular distributions are discussed. Two specific examples related to the 22Na(p, γ) and 30P(p, γ) reactions are presented.

FURIOS, the Fast Universal laser IOn Source, is under development at the IGISOL (Ion Guide Isotope Separator On-Line) mass separator facility in Jyvaskyla, Finland. This new laser ion source will combine a state-of-the-art solid state laser system together with a dye laser system, for the selective and efficient production of exotic radioactive species without compromising the universality and fast release inherent in the IGISOL system. The motivation for, and development of, this ion source is discussed in relation to the programme of research ongoing at this mass separator facility.

Decay properties of neutron-deficient exotic nuclei close to A=80 have been investigated at the IGISOL facility. The studied nuclei, 81Y, 81Sr, 81mKr, 85Nb, 85Zr, 86Mo and 86Nb, were produced by a 32S beam from the Jyvaskyla isochronous cyclotron on 54Fe and natNi targets. The internal conversion coefficient for a 190.5 keV isomeric transition in 81mKr has been measured and the internal transition rate has been determined. The internal transition rate has been used to estimate a neutrino capture rate on 81Br, which yields a log ft of 5.13±0.09 for the reaction 81Br( ν, e-)81mKr. A new isomer with a half-life of 3.3±0.9 s has been observed in 85Nb. The existence of an earlier reported isomer with a half-life of 56 s in 86Nb has not been confirmed.