Search

Cadmium (Cd) is a toxic heavy metal that, when present as a pollutant in the marine environment, is readily accumulated by marine bivalves, causing oxidative stress and tissue damage. This study explored whether short-term depuration could reverse Cd2+-induced toxicity in the ovary of the clam Meretrix meretrix. Clams exposed to 3 mg L-1 Cd2+ for three days showed increased accumulated Cd2+ in their ovaries with obvious tissue damage as shown by loose structure and some apoptotic cells compared with non-exposed clams. Increased oxidative stress in the ovarian tissue was also obvious, as revealed by increased levels of oxidative indicators such as reactive oxygen species (ROS), malondialdehyde (MDA), DNA-protein crosslinking (DPC), and protein carbonylation (PCO) and increased expression levels of genes related to oxidative stress and apoptosis, which included the Bax, Bcl-2, caspase-3, HO-1, Hsp70, NQO1, Nrf2, and MT genes. When the clams were exposed to Cd2+ for three more days, the accumulated Cd2+ level in the ovary increased to more than 10-fold the level in the control clams, accompanied by more severe damage and cell death as well as oxidative stress. However, when the initial three-day Cd2+ exposure was followed by three days of depuration in Cd2+-free seawater, the Cd2+ level in the ovary was reduced by as much as 20%, accompanied by some recovery of tissue damage and reduced oxidative stress, suggesting that short-term depuration may mitigate Cd2+-induced toxicity in M. meretrix, allowing the clams to recover and potentially reducing the risk of Cd2+ exposure from consuming contaminated clams. [ABSTRACT FROM AUTHOR]

AbstractIntroductionMethodsResultsDiscussionConclusionsKratom is commonly used by consumers, and the elemental impurity exposure that consumers would have at different kratom ingestion doses has been determined.This assessment used original data from independent third-party laboratory testing of kratom products to identify the percentage of products that exceeded permissible daily exposure limits for lead (5 µg/day), nickel (200 µg/day), arsenic (15 µg/day), and cadmium (5 µg/day), the interim reference level for lead in adults (12.5 µg/day), and the tolerable upper intake level for manganese (11 mg/day) and nickel (1 mg/day). We assessed all products regardless of type and then evaluated non-extract products, extract products, and a soda preparation separately for elemental impurities.Three assessments of elemental impurities in kratom products have been published, totaling 68 products. Assessing all products and assuming a 3 g daily dose of kratom, 7.4% would exceed the permissible daily exposure limits for lead, 0% for nickel, 3.1% for arsenic, and 0% for cadmium. At a kratom dose of 25 g daily, 70.6% would exceed the permissible daily exposure limits for lead, 20.6% for nickel, 9.4% for arsenic, and 0% for cadmium. The interim reference level for lead would be exceeded by 1.5% of products at a kratom daily dose of 3 g and 33.8% of products at 25 g. The tolerable upper intake level for manganese would be exceeded by 12.5% of products at a kratom daily dose of 3 g and 41.7% of products at 25 g. Non-extract products generally contain greater concentrations of elemental impurities than extract products or the soda preparation.Apart from their concentrations in a gram of product, assessing the amount of exposure to elemental impurities at different kratom ingestion doses is also important. Elemental impurities exceeding regulatory permissible concentrations for many products, especially with greater daily kratom ingestion doses, may impact human health.Some kratom products contain excessive concentrations of elemental impurities of toxicological concern, such as lead and arsenic. Non-extract products (powders, capsules, tablets) generally contain greater concentrations of elemental impurities than extract products or the soda preparation. Daily use of these products can result in exposures exceeding regulatory thresholds and adverse health effects. [ABSTRACT FROM AUTHOR]

To ensure the safety of medical personnel in healthcare organizations, radiation-shielding materials like protective clothing are used to protect against low-dose radiation, such as scattered rays. The extremities, particularly the hands, are the most exposed to radiation. New materials that can be directly coated onto the skin would be more cost-effective, efficient, and convenient than gloves. We developed protective creams using eco-friendly shielding materials, including barium sulfate, bismuth oxide, and ytterbium oxide, to avoid harmful effects of heavy metals like lead, and tested their skin-protective effects. Particularly, the radiation-shielding effect of ytterbium oxide was compared with that of the other materials. As shielding material dispersion and layer thickness greatly affect the efficacy of radiation-shielding creams, we assessed dispersion in terms of the weight percentage (wt%). The effective radiation energy was reduced by 20% with a 1.0-mm increase in cream thickness. Ytterbium oxide had a higher radiation-shielding rate than the other two materials. A 28% difference in protective effect was observed with varying wt%, and the 45 wt% cream at 63.4 keV radiation achieved a 61.3% reduction rate. Higher content led to a more stable incident energy-reducing effect. In conclusion, ytterbium oxide shows potential as a radiation-shielding material for creams. [ABSTRACT FROM AUTHOR]

Asthma start, development, and exacerbation have all been linked in numerous studies to exposure to a variety of metal elements. However, there is still a dearth of epidemiological data linking heavy metal exposure to death in asthmatics. The investigation included 2432 eligible adults with asthma. The study examined the possible correlation between blood heavy metal levels and all-cause mortality. This was done by utilizing Cox proportional hazards models, restricted cubic spline (RCS), threshold effect models, and CoxBoost models. Subgroup analyses were conducted to investigate the associations between blood metal levels and all-cause mortality among distinct asthmatic populations. An inverse association was found between blood selenium and all-cause mortality in asthmatics, while blood manganese showed a positive association with all-cause mortality. However, there were no significant connections found between blood lead, cadmium, mercury, and all-cause mortality via multivariate Cox proportional hazard models. In model 3, after accounting for all factors, all-cause mortality dropped by 10% for every additional 10 units of blood selenium (μg/L) and increased by 6% for every additional unit of blood manganese (μg/L). The RCS and threshold effect model found a U-shaped correlation between blood selenium, blood manganese, and all-cause mortality. The lowest all-cause mortality among asthmatics was observed when blood selenium and manganese were 188.66 μg/L and 8.47 μg/L, respectively. Our investigation found a U-shaped correlation between blood selenium levels, blood manganese levels, and all-cause mortality in asthmatic populations. Optimizing dietary selenium intake and effectively managing manganese exposure could potentially improve the prognosis of asthma. [ABSTRACT FROM AUTHOR]

Soil contamination with heavy metals presents a substantial environmental peril, necessitating the exploration of innovative remediation approaches. This research aimed to investigate the efficiency of nano-silica in stabilizing heavy metals in a calcareous heavy metal-contaminated soil. The soil was treated with five nano-silica levels of 0, 100, 200, 500, and 1000 mg/kg and incubated for two months. The results showed that nano-silica had a specific surface area of 179.68 m 2 / g . At 1000 mg/kg, the DTPA-extractable concentrations of Pb, Zn, Cu, Ni, and Cr decreased by 12%, 11%, 11.6%, 10%, and 9.5% compared to the controls, respectively. Additionally, as the nano-silica application rate increased, both soil pH and specific surface area increased. The augmentation of nano-silica adsorbent in the soil led to a decline in the exchangeable (EX) and carbonate-bound fractions of Pb, Cu, Zn, Ni, and Cr, while the distribution of heavy metals in fractions bonded with Fe–Mn oxides, organic matter, and residue increased. The use of 1000 mg/kg nano-silica resulted in an 8.0% reduction in EX Pb, 4.5% in EX Cu, 7.3% in EX Zn, 7.1% in EX Ni, and 7.9% in EX Cr compared to the control treatment. Overall, our study highlights the potential of nano silica as a promising remediation strategy for addressing heavy metal pollution in contaminated soils, offering sustainable solutions for environmental restoration and ecosystem protection. [ABSTRACT FROM AUTHOR]

Heavy metal ions can be introduced into the water through several point and non-point sources including leather industry, coal mining, agriculture activity and domestic waste. Regrettably, these toxic heavy metals may pose a threat to both humans and animals, particularly when they infiltrate water and soil. Heavy metal poisoning can lead to many health complications, such as liver and renal dysfunction, dermatological difficulties, and potentially even malignancies. To mitigate the risk of heavy metal ion exposure to humans and animals, it is imperative to extract them from places that have been polluted. Several conventional methods such as ion exchange, reverse osmosis, ultrafiltration, membrane filtration and chemical precipitation have been used for the removal of heavy metal ions. However, these methods have high operation costs and generate secondary pollutants during water treatment. Biosorption is an alternative approach to eliminating heavy metals from water that involves employing eco-friendly and cost-effective biomass. This review is focused on the heavy metal ions contamination in the water, biosorption methods for heavy metal removal and mathematical modeling to explain the behaviour of heavy metal adsorption. This review can be helpful to the researchers to design wastewater treatment plants for sustainable wastewater treatment. [ABSTRACT FROM AUTHOR]

Heavy metals mainly exist on the surface of sediment particles and are transported using particulate matter as carriers. Therefore, the particle size of sediment particles can affect the adsorption, release, and migration of heavy metals. This study aim to investigate the distribution characteristics and chemical fraction of Cd, Pb, and As contents in sediments of different particle sizes using the BCR method, and to determine the key factors affecting the distribution of heavy metals through mineralogical methods such as XRD and EDS. The results revealed that the overall content of various forms of heavy metals increases with the decrease of particle size, mainly presents in fine particles. The mineralogical analysis results indicated that fine particles predominantly contained clay minerals such as chlorite and illite and coarse particles mainly include primary minerals. Due to the mining areas in the middle-upstream, Cd, Pb and As were primarily associated with galena, sphalerite and pyrite, respectively. The distribution of heavy metals is jointly influenced by sediment particle size and sediment material composition. [ABSTRACT FROM AUTHOR]

Understanding the interactions of carbon and metal pollutants in anthropogenically impacted rivers is a prerequisite for determining the relative fates of these stressors. Here, through two sets of studies, we report carbon–metal pollutant interactions choosing the CO2 emission and sediment microbial extracellular enzyme activities as major determinants. The study, conducted along a 520-km main river and along a point source trajectory, showed a TOC-dependent but metal pollution-constrained CO2 emission. We found significant relationships (p < 0.05–0.001) between CO2 emission flux and its determinants: TOC, Cmic, FDAase and β-D-glucosidase. In the point source trajectory, CO2 emission flux was closely synchronous to these determinants. These relationships, however, were significantly constrained at the sites such as Knuj, Jjmu and Rjht where the concentrations of total heavy metal (∑THM) in the sediment exceed 347.44 µg g−1 indicating that the heavy metal pollution counteracted the C processing and consequently the CO2 emission flux. The study suggests that the excessive load of metal pollutants will eventually interrupt the C-cycling in the Ganga River inviting caution in C budgeting and C transport to coastal ocean. [ABSTRACT FROM AUTHOR]

Abstract\nNOVELTY STATEMENTThe combined microbial-plant remediation has increasingly been used to remediate heavy metal-contaminated soil. Some microorganisms could enhance phytoremediation efficiency by solubilizing heavy metal and improve plant growth by producing phytohormones in the heavy metal contaminated soils. In the present study, a strong cesium (Cs)-tolerant fungal strain Paecilomyces lilacinus was identified from soil microorganisms contaminated with Cs, and the enrichment conditions for Cs were optimized. Furthermore, the effects of the A10 fermentation solution on the growth of Indian mustard (Brassica juncea L.) seedlings were investigated. The results indicated that the optimal combination of factors consisted of a culture temperature of 28 °C, pH7.0, initial concentration of Cs at 5.91 g·L−1. The maximum enrichment of Cs in the A10 was up to 75.36 mg·g−1 DW. In addition, the enrichment of Cs in Indian mustard was significantly enhanced by the application of the A10 fermentation solution, and the growth of Indian mustard was promoted under Cs stress. The present study has expanded the repertoire of microbial resources available for facilitating the Cs contaminated soil, thereby enhancing its applicability in the phytoremediation strategies.Recently, cesium (Cs) pollution has become a global environmental problem. Although much attention has been paid to combined microbe-plant remediation, there is still a lack of microbial strains with efficient Cs adsorption capacity to assist phytoremediation. The present study identified a new Cs accumulation fungus that effectively enhances the growth of Brassica juncea L. under Cs stress. In a word, the findings of this study have expanded the repertoire of microbial resources available for facilitating the Cs contaminated soil, thereby enhancing its applicability in the phytoremediation strategies. [ABSTRACT FROM AUTHOR]

Introduction: Hydrothermal vents, rich in heavy metals, provided a unique niche for heavy metal resistant microbes. However, knowledge about copper resistant microbes in deep sea hydrothermal vents is still limited. Methods: The copper-resistant bacteria were isolated from deep-sea hydrothermal vent samples and conducted thorough physical, phylogenetic, and genomic analyses to elucidate their copper resistance capability and related genes. Results: Twelve highly copper-resistant bacteria (up to 6-10 mM) were isolated from deep sea hydrothermal fields They were affiliated with the Pseudoalteromonas (4), Marinobacter (3), Halomonas (2), Psychrobacter (1), and Pseudomonas (1) genus in the α-Proteobacteria, and the Sphingomonas (1) genus in the β-Proteobacteria. The presence of copper in the medium obviously induced the amount of polysaccharides and proteins in the crude extracellular polymeric substances (EPS) produced by Halomonas sp. CuT 3-1, Pseudoalteromonas sp. CuT 4-3 and Marinobacter metalliresistant CuT 6, which could absorb 40 to 50 mg•g-1 copper. We further described a novel species, Marinobacter metalliresistant sp. nov. CuT 6T, which exhibited a higher copper resistance and encoded more heavy metal resistance-related genes than other Marinobacter species. Discussion: It revealed that the copper resistance capability exhibited by these strains in hydrothermal fields is likely attributed to the production of exopolymeric substances, such as polysaccharides and proteins, as well as active transport or efflux mechanisms for heavy metals. [ABSTRACT FROM AUTHOR]

This study investigated the impact of sweeteners on the release of heavy metals during the heating and atomization processes in electronic cigarettes. Based on a PG/VG base e-liquid with the addition of 2% and 5% neotame or sucralose, we quantitatively analyzed the impact of sweetener content on the levels of heavy metals such as Ni, Cr, and Fe in the e-liquid and aerosol after heating and atomization. Additionally, the heated e-liquid samples were used to culture SH-SY-5Y and Beas-2B cells, and their cytotoxic effects were assessed using the CCK-8 assay. The results indicated that the e-liquid with 5% sucralose had the highest average levels of heavy metals after heating and atomization, particularly nickel (13.36 ± 2.50 mg/kg in the e-liquid and 12,109 ± 3,229 ng/200 puffs in the aerosol), whereas the e-liquid with neotame had significantly lower average heavy metal content in comparison. Additionally, it was measured that the chloride ion concentration in the e-liquid with 5% sucralose reached 191 mg/kg after heating at 200°C for 1 h, indicating that heating sucralose generated chloride ions, Which might corrode metal parts components leading to heavy metal release. Cytotoxicity tests revealed that the base e-liquid without sweeteners exhibited the highest average cell viability after heating, at 64.80% ± 2.84% in SH-SY-5Y cells and 63.24% ± 0.86% in Beas-2B cells. Conversely, the e-liquid variant with 5% sucralose showed a significant reduction in average cell viability, reducing it to 50.74% ± 0.88% in SH-SY-5Y cells and 53.03% ± 0.76% in Beas-2B cells, highlighting its more pronounced cytotoxic effects compared to other tested e-liquids. In conclusion, sucralose in e-liquids should be limited preferably less than 2%, or replaced with neotame, a safer alternative, to minimize health risks. [ABSTRACT FROM AUTHOR]

This study was conducted to determine the changes in the heavy metal and microelement contents of bean (Phaseolus vulgaris L.) plants with increasing doses of boron and sewage sludge applications. The experiment, which was set up according to the completely randomized design (CRD) in the climate chamber, was carried out with three replications. In the study where Mina, a standard dwarf bean variety, was used, four different boron doses (B0:0 mg/kg, B10:10 mg/kg, B20:20 mg/kg, B40: 40 mg/kg) and four doses of sewage sludge (SS0: %0, SS5: %5, SS10: %10, SS20: %20) were used as trial factors. In the study, sewage sludge treatments were found to be more effective in increasing the content of microelements in beans compared to control, such as aluminum, copper, manganese, zinc, iron, chromium, lead, nickel, arsenic, cadmium, and cobalt. At the same time, it was observed to cause a decrease in the content of boron. The highest microelement and heavy metal contents were measured at 5% and 10% sewage sludge doses. On the other hand, it was determined that boron applications increased the aluminum, copper, boron, zinc, cobalt, manganese, and nickel contents of bean plants compared to control plants, and decreased the iron, arsenic, cadmium, and lead contents. The study showed that the negative effects of increased metal contents as a result of sewage sludge applications can be tolerated with boron applications. It seems that it may be possible to reduce heavy metal pollution in plants with such boron treatments. [ABSTRACT FROM AUTHOR]

Objective: The study investigated maternal exposure to heavy metals from industrial sources during pregnancy as potential risk factors for childhood cancer. Methods: Cases ages 0-19 were identified from California Cancer Registry. Controls (20:1 ratio) were randomly selected from California Birth Registry, frequency-matched by birth year (1998-2016). We estimated maternal exposure to lead, nickel, and cobalt in ambient air from the Toxics Release Inventory. We examined "ever/never" and "high/low" exposures categorized by median exposure. Models were adjusted for maternal age, race/ethnicity, method of payment for prenatal care, neighborhood socioeconomic status, and urban/rural residence. Results: Among highly exposed persons, lead was associated with an increased teratoma risk (adjusted odds ratio [aOR]: 1.52; 95% confidence interval [CI]: 0.97, 2.37), whereas nickel was associated with an increased rhabdomyosarcoma risk (aOR: 1.45; 95% CI: 1.03, 2.04). Cobaltwas associated with an increased glioma risk (aOR: 2.25; 95% CI: 1.39, 3.65) among ever-exposed persons. Inverse associations were found between Wilms tumor and nickel among the ever exposed and highly exposed (ever: aOR: 0.75; 95% CI: 0.59, 0.96; high: aOR: 0.64; 95% CI: 0.45, 0.93). Conclusions: Findings suggest that air pollution from heavy metals released by industrial sources may elevate childhood cancer risk. [ABSTRACT FROM AUTHOR]

The removal of pollutants, including heavy metals, from the aquatic environment is an urgent problem worldwide. Actively developing nanotechnology areas is becoming increasingly important for solving problems in the field of the remediation of aquatic ecosystems. In particular, methods for removing pollutants using nanoparticles (NPs) are proposed, which raises the question of the effect of a combination of NPs and heavy metals on living organisms. In this work, we investigated the role of CuO-NPs in changing the toxicity of Cd and Pb salts, as well as the bioaccumulation of these elements in a culture of the microalga Desmodesmus communis. It was found that CuO-NPs at concentrations of 10, 100, and 1000 µg L−1 had no effect on the viability of microalgae cells. On the 14th day of the experiment, Cd at a concentration of 1 mg L−1 reduced the viability index by 30% and, when combined with CuO-NPs, by 25%, i.e., CuO-NPs slightly reduced the toxic effect of Cd. At the same time, in this experiment, when CuO-NPs and Cd were used together, the level of oxidative stress increased, including on the first day in mixtures with 1 mg L−1 Cd. Under the influence of Pb, the cell viability index decreased by 70% by the end of the experiment, regardless of the metal concentration. The presence of CuO-NPs slightly reduced the toxicity of Pb in terms of viability and reactive oxygen species (ROS). At the same time, unlike Cd, Pb without NPs caused ROS production on the first day, whereas the addition of CuO-NPs completely detoxified Pb at the beginning and had a dose-dependent effect on mixtures at the end of the experiment. Also, the introduction of CuO-NPs slightly reduced the negative effect of Pb on pigment synthesis. As a molecular mechanism of the observed effects, we prioritized the provocation of oxidative stress by nanoparticles and related gene expression and biochemical reactions of algae cells. Analysis of the effect of CuO-NPs on the Cd and Pb content in microalgae cells showed increased accumulation of heavy metals. Thus, when algae were cultured in an environment with Cd and CuO-NPs, the Cd content per cell increased 4.2 times compared to the variant where cells were cultured only with Cd. In the case of Pb, the increase in its content per one cell increased 6.2 times when microalgae were cultured in an environment containing CuO-NPs. Thus, we found that CuO-NPs reduce the toxic effects of Cd and Pb, as well as significantly enhance the bioaccumulation of these toxic elements in the cells of D. communis microalgae. The results obtained can form the basis of technology for the nanobioremediation of aquatic ecosystems from heavy metals using microalgae. [ABSTRACT FROM AUTHOR]

This study investigates heavy metal contamination in soils, irrigation water, and agricultural produce (fruits: Vitis vinifera (grape), Cucumis melo var. saccharimus (melon), and Citrullus vulgaris. Schrade (watermelon); vegetables: Lycopersicum esculentum L. (tomato), Cucurbita pepo (zucchini), Daucus carota (carrot), Lactuca sativa (lettuce), Convolvulus Batatas (potato), and Capsicum annuum L. (green pepper)) in the Boumerdes region of Algeria. The concentrations of seven heavy metals (cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), nickel (Ni), lead (Pb), and zinc (Zn)) in soil and food samples were analyzed using atomic absorption spectrometry. Health risks associated with these metals were evaluated through the estimated daily intake (EDI), non-carcinogenic risks (using target hazard quotient (THQ), total target hazard quotient (TTHQ), and hazard index (HI)), and carcinogenic risks (cancer risk factor (CR)). Statistical analyses, including cluster analysis (CA) and Pearson correlation, were conducted to interpret the data. The results revealed the highest metal transfer as follows: Cd was most significantly transferred to tomatoes and watermelons; Cr to carrots; Cu to tomatoes; and Fe, Ni, Pb, and Zn to lettuce. Among fruits, the highest EDI values were for Zn (2.54·10−3 mg/day) and Cu (1.17·10−3 mg/day), with melons showing the highest Zn levels. For vegetables, the highest EDI values were for Fe (1.68·10−2 mg/day) and Zn (8.37·10−3 mg/day), with potatoes showing the highest Fe levels. Although all heavy metal concentrations were within the World Health Organization's permissible limits, the HI and TTHQ values indicated potential health risks, particularly from vegetable consumption. These findings suggest the need for ongoing monitoring to ensure food safety and mitigate health risks associated with heavy metal contamination. [ABSTRACT FROM AUTHOR]

The root of Salvia miltiorrhiza Bunge (SMB) has been widely used to treat cardiovascular diseases. However, the contents of secondary metabolites in the roots from different production areas are significantly different, and the impact of soil factors on this accumulation remains unclear. Therefore, this study aimed to elucidate the regularity of variation between the active components and soil factors through targeted metabolomics and chemical dosimetry. Soils were collected from five different cities (A, B, C, D, and E) and transplanted into the study area. The results showed that there were significant differences in the soil fertility characteristics and heavy metal pollution levels in different soils. Ten water- and twelve lipid-soluble metabolites were identified in SMBs grown in all soil types. SMBs from D cities exhibited the highest total tanshinone content (p < 0.05). The salvianolic acid B content in SMBs from E cities was the highest (p < 0.05). Interestingly, correlation analysis revealed a significant negative correlation between the accumulation of lipid-soluble and water-soluble metabolites. Double-matrix correlation analysis demonstrated that available potassium (AK) was significantly negatively correlated with salvianolic acid B (r = −0.80, p = 0.0004) and positively correlated with tanshinone IIA (r = 0.66, p = 0.008). Conversely, cadmium (Cd) and cuprum (Cu) were significantly positively and negatively correlated with salvianolic acid B (r = 0.96, p < 0.0001 and r = 0.72, p = 0.0024) and tanshinone IIA (r = 0.40, p = 0.14 and r = 0.73, p = 0.0018), respectively. Mantel's test indicated that AK (r > 0.52, p < 0.001), Cu (r > 0.60, p < 0.005), and Cd (r > 0.31, p < 0.05) were the primary drivers of the differences in the active components of SMBs. These findings provide a theoretical framework for modulating targeted metabolites of SMB through soil factors, with significant implications for the cultivation and quality control of medicinal plants. [ABSTRACT FROM AUTHOR]

In this study, nanoporous gold (NPG) was deposited on a screen-printed carbon electrode (SPCE) by the dynamic hydrogen bubble template (DHBT) method to prepare an electrochemical sensor for the simultaneous determination of Pb2+ and Cu2+ by square wave anodic stripping voltammetry (SWASV). The electrodeposition potential and electrodeposition time for NPG/SPCE preparation were investigated thoroughly. Scanning electron microscopy (SEM) and energy-dispersive X-ray diffraction (EDX) analysis confirmed successful fabrication of the NPG-modified electrode. Electrochemical characterization exhibits its superior electron transfer ability compared with bare and nanogold-modified electrodes. After a comprehensive optimization, Pb2+ and Cu2+ were simultaneously determined with linear range of 1–100 μg/L for Pb2+ and 10–100 μg/L for Cu2+, respectively. The limits of detection were determined to be 0.4 μg/L and 5.4 μg/L for Pb2+ and Cu2+, respectively. This method offers a broad linear detection range, a low detection limit, and good reliability for heavy metal determination in drinking water. These results suggest that NPG/SPCE holds great promise in environmental and food applications. [ABSTRACT FROM AUTHOR]

Background Glucosinolates (GSL) play an important role in providing defense to plants and helping them to cope with various biotic, as well as abiotic, stresses. Many living beings including humans and animals, including some herbivores, have adapted themselves to use this defense mechanism for their own use. More than 120 glucosinolates are distributed within a large number of plants. Many factors are known to influence the GSL composition in a plant. Among these, cofactors, myrosinase isozymes, heavy metals and the environmental conditions such as light, CO2 and temperature are important in regulation. These factors ensure that different glucosinolate compositions can be produced by the plants, thus impacting the defense mechanism. Objective The objective of the current review is to highlight the importance of the factors responsible for affecting glucosinolate composition and concentration. Methods The review has been compiled using accessible literature from Pubmed, Scopus, and Google scholar. Efforts have been made to restrict the literature to the last 5 years (2018–2023), with some exceptions. Results The current critical review acts as a resource for all the researchers working on these essential compounds. It provides information on the factors that may influence glucosinolate production. It also gives them an opportunity to modify the glucosinolate composition of a plant using the given information. Conclusions Glucosinolates have long been an ignored class of biomolecule. The plethora of biological activities of the compounds can be useful. Though there are some harmful components such as goitrin and progoitrin, these can be easily removed by modulating some of the factors highlighted in the review. Highlights The current review has covered most of the factors that have the ability to modify glucosinolate composition and concentration. The mechanistic action of these factors has also been discussed using the current available literature. [ABSTRACT FROM AUTHOR]

A tomato cultivar ('Izmir F1') grafted onto six commercially available rootstocks ('Arnold', 'Dohkko', 'Emperador', 'He-man', 'Kaiser', and 'Suzuka') together with self-grafted plants of the tomato cultivar (Izmir/Izmir) were included in a pot experiment. Growth, root morphology and nutrient uptake parameters were evaluated under different salinity conditions (0 and 50 mM NaCl). Grafting increases root length, specific root length, and root length ratio, which enhances the capabilities of hetero-grafted plants to exploit a larger volume of soil or otherwise increase root density under root restriction conditions. Since the root traits and nutrient concentrations in hetero-grafted variants were less impacted by a change in the salinity level, the use of specific rootstocks ('Arnold,' 'Dohkko,' 'Kaiser') could contribute to a steadier growth and yield of tomato plants under fluctuating salinity levels in the irrigation water. The hetero-grafted tomato plants (Dohkko/Izmir, Suzuka/Izmir) demonstrated higher Na sequestration/compartmentalization capabilities than the self-grafted (Izmir/Izmir) plants which helps to maintain a more appropriate K+/Na+ ratio. By exhibiting lower translocation indexes of some heavy metals (Al, Ni, Zn, and Cd), appropriate rootstock/scion combinations might be a useful tool for reducing the risk of their accumulation in edible plant organs. [ABSTRACT FROM AUTHOR]

Heavy metal contamination in soils and vegetation poses a significant problem due to its toxicity and persistence. Toxic effects on vegetation include not only impaired growth, reduced yields, and even plant death but also biodiversity loss and ecosystem degradation. Addressing this issue requires comprehensive monitoring and remediation efforts to mitigate the environmental, human health, and ecological impacts. This review examines the state-of-the-art methodologies and advancements in remote sensing applications for detecting and monitoring heavy metal contamination in soil and its subsequent effects on vegetation. By synthesizing the current research findings and technological developments, this review offers insights into the efficacy and potential of remote sensing for monitoring heavy metal contamination in terrestrial ecosystems. However, current studies focus on regression and AI methods to link spectral reflectances and indices to heavy metal concentrations, which poses limited transferability to other areas, times, spectral discretizations, and heavy metal elements. We conclude that one important way forward is the more thorough understanding and simulation of the related physico-chemical processes in soils and plants and their effects on the spectral signatures. This would offer a profound basis for remote sensing applications for individual circumstances and would allow disentangling heavy metal effects from other stressors such as droughts or soil salinity. [ABSTRACT FROM AUTHOR]

Mercury, a highly toxic metal and pollutant, poses a significant risk to human health and the environment. This study describes the synthesis of a new nitrogen-doped heteroaromatic hyper-crosslinked polyamine (HCPA) via the polycondensation of 2,6-diaminopyrazine and tris(4-formylphenyl)amine for the efficient removal of mercury ions from aqueous solutions. The HCPA polymer was characterized by solid-state 13C-NMR and FT-IR spectroscopy. A powder X-ray diffraction and thermogravimetric analysis showed that the polymer was semicrystalline in nature and stable up to 500 °C. Adsorption isotherms indicated that mercury adsorption occurred via mono- and multilayer adsorption by HCPA, as depicted by the Langmuir, Freundlich, and Redlich–Peterson isotherm models, with a maximum adsorption capacity of qm = 333.3 mg/g. Adsorption kinetic models suggested that the adsorption process was fast and effective, reaching equilibrium within 20 min. Thermodynamics of the adsorption process revealed that it was endothermic and spontaneous in nature due to the positive ΔH0 of 48 kJ/mol and negative ΔG0 values of −4.5 kJ/mol at 293 K. Wastewater treatment revealed 98% removal of mercury indicating the selective nature of HCPA. Finally, HCPA exhibited excellent performance and regeneration up to three cycles, demonstrating its great potential as an adsorbent for environmental remediation applications. [ABSTRACT FROM AUTHOR]

Cadmium is a heavy metal that pollutes the environment and foods and is a risk factor for vascular disorders. We have previously demonstrated that pretreatment of vascular endothelial cells with zinc and copper protects the cells against cadmium cytotoxicity. In contrast, cadmium cytotoxicity was potentiated in cells following exposure to lead, thereby indicating that in vascular endothelial cells, cadmium cytotoxicity can be differentially modified by the co-occurrence of other heavy metals. In this study, we revealed that simultaneous treatment or pretreatment with manganese protects vascular endothelial cells against cadmium cytotoxicity. Intracellular accumulation of cadmium was observed to be reduced by simultaneous treatment with manganese, although not by pretreatment. The mRNA expression of metal transporters that regulate the uptake of both cadmium and manganese (ZIP8, ZIP14, and DMT1) remained unaffected by either simultaneous treatment or pretreatment with manganese, and simultaneous treatment with manganese suppressed the cadmium-induced expression of metallothionein but pretreatment with manganese did not exhibit such suppressive effect. Thus, the protection of vascular endothelial cells against cadmium cytotoxicity conferred by simultaneous treatment with manganese is assumed to be partially attributed to a reduction in the intracellular accumulation of cadmium, whereas the effects of pretreatment with manganese are independent of both the reduced intracellular accumulation of cadmium and the induction of metallothionein. These observations accordingly indicate that the protective effects of manganese are mediated via alternative (as yet unidentified) mechanisms. [ABSTRACT FROM AUTHOR]

The present work was conducted to evaluate the chromium contamination and its relationship with soil components of the Eastern Ghouta of Damascus, Syria. Various areas were chosen in the terms of chromium content analysis. Soil samples were collected from these areas to a depth of 60 cm from the three layers, at intervals of 20 cm. The results showed that the levels of total and CrVI were within the normal limits in Al-Maamouniye (uncontaminated with chromium), Jobar (agricultural land), and Ein Tarma (agricultural land). While it exceeded the maximum permissible limit (MPL) as per FAO and WHO on the area of Tanneries (Dabagat). The soil content of CrIII (536.99, 474.34, 415.77 mg kg–1) and CrVI (0.12, 0.51, 0.75 mg kg–1) were determined in the layers of 0–20, 20–40, 40–60 cm, respectively. The results also showed that 80% of chromium was associated with organic matter in the soil of Al-Dabagat region. In contrast, approximately 85% of chromium was available in the remaining part of the Mamounia soil. It was noted the content of chromium, which is associated with iron and manganese oxides, were high. Although chromium was exchangeable and bounded to CaCO3, however, its quantity was negligible. The results showed that the concentration of CrVI increased with depth at all the selected areas, in contrast to CrIII which decreased with the depth of soils. [ABSTRACT FROM AUTHOR]

Rapid detection of potentially toxic heavy metals like Hg(II) has attracted great attention in the last few decades due to the importance to maintain a safe and sustainable environment for human beings. Coordination chemistry and concepts therein, play an important role in the detection of Hg(II). Size, charge, and nature of the donor atom and the respective cation (metal ion), are crucial in selective interactions between the sensor and metal ions. The sensors designed for the purpose, coordinate to Hg(II) ion through various donor sites, coordination causes a change in the electron density in organic molecules and results in either visible color change or enhancing/quenching fluorescence intensity. Since Hg(II) is soft metal, with d10 electron system, so majority of the sensors have soft donor sites which prefer to coordinate with Hg(II). Oxygen is also present in some chelating ligands which is least preferred coordination site, due to its hard nature. There are several reports of replacing other ligating sites by sulfur for enhanced mercury sensing. In some cases, desulfurization is being detected as clear change in spectral behavior during the sensing process. Efforts are still in progress to design and introduce a sensor with utmost sensitivity and selectivity. In this review, we made an attempt to explain the coordination aspects of Hg(II) detectors, reasons for poor efficiency and possible suggestions to improve the selection criterion of various compounds. It will help researchers to know about important concepts in designing more sensitive and selective sensors for detection of Hg(II) in environmental and biological samples. [ABSTRACT FROM AUTHOR]

Heavy metals ions as metallic pollutants are a growing global issue due to their adverse effects on the aquatic ecosystem, and human health. Unfortunately, conventional detection methods such as atomic absorption spectrometry exhibit a relatively low limit of detection and hold numerous disadvantages, and therefore, the development of an efficient method for in-situ and real-time detection of heavy metal residues is of great importance. The aptamer-based sensors offer distinct advantages over antibodies and emerged as a robust sensing platform against various heavy metals due to their high sensitivity, ease of production, simple operations, excellent specificity, better stability, low immunogenicity, and cost-effectiveness. The nucleic acid aptamers in conjugation with nanomaterials can bind to the metal ions with good specificity/selectivity and can be used for on-site monitoring of metal ion residues. This review aimed to provide background information about nanomaterials-based aptasensor, recent advancements in aptamer conjunction on nanomaterials surface, the role of nanomaterials in improving signal transduction, recent progress of nanomaterials-based aptasening procedures (from 2010 to 2022), and future perspectives toward the practical applications of nanomaterials-based aptasensors against hazardous metal ions for food safety and environmental monitoring. [ABSTRACT FROM AUTHOR]

• Lead toxicity was significantly reduced in rice plants by applying CeO 2 NPs and FeONPs. • Nanoparticle application caused significant reduction in MDA, H 2 O 2 , and electrolyte leakage. • Nanoparticles reduced Pb uptake in plants. • The growth of rice plants was stimulated by nanoparticle application. Nanotechnology offers creative and effective solutions for addressing various environmental issues, such as heavy metals (HM). The rapidly increasing HM concentrations in agricultural land have drawn considerable attention. Nanoparticles (NPs) have special physiochemical features that help reduce stress. This study assessed the viability of applying CeO 2 NPs and FeONPs to rice plants at a concentration of 25 mg/L to effectively remove the detrimental effects of lead (Pb) by using various concentrations (100 and 200 ppm) on plant development and growth. To achieve the desired concentrations, a Pb solution was prepared by dissolving lead nitrate in distilled water and added to the soil. Interestingly, the application of CeO 2 NPs and FeONPs resulted in a notable increase in plant growth, biomass, gas exchange characteristics, antioxidant enzymatic activity (SOD, POD, APX, and CAT), their gene expressions, as well as other antioxidants (phenols, prolines, amino acids, flavonoids, anthocyanins, and ascorbic acids) while simultaneously reducing oxidative stress (MDA, H 2 O 2 , and electrolyte leakage) and Pb uptake in rice. Conversely, Pb elevation in the soil increased oxidative damage and organic acid exudation pattern in the rice. At 200 ppm, a significant rise in Pb content (416.67 % and 380 %) was found in the roots and leaves of rice plants. According to our findings, rice growth can be bio-stimulated by CeO 2 NPs and FeONPs. Subsequent investigations should focus on the persistent ecological consequences and molecular mechanisms associated with the application of cerium oxide and iron oxide nanoparticles in agriculture to reduce Pb-induced oxidative stress. [ABSTRACT FROM AUTHOR]

In this study, surface dust samples were collected within the second ring road of Shenyang City under different land-use types, and the concentration and chemical speciation of metals in different particle sizes under different land-use types were analyzed. Dust samples were separated into four particle size fractions (＜50, 50–100, 100–500, 500–2000 μm), and particles in the range of 100–500 µm were the highest representing one-third of the dust mass. The results revealed that metals were detected in order Zn > Cr > Pb > Cu > Ni > As > Cd in different particle sizes of dust under different land-use types. The relative contribution of individual particle-size fractions for seven metals was different, but the results showed preferential partitioning to small particle-size fractions. The relative contribution of metals in individual particle-size fractions and chemical speciation were significantly affected by the type of land use. Metals concentrated on the smaller particles in the traffic area, and the particles (<50 µm) contained the highest percentage of metals but Cr. The residual fractions (F5) of Ni, Cr, As and Cu overall represented the predominant portion in different particle size of fractions under different land-use types, Zn and Pb were mostly bound to the Fe–Mn oxides-bound fraction (F3), and the exchangeable fraction (F1) accounted for a relatively large proportion of Cd. The results of the risk assessment code (RAC) of Cd indicated that the risk of Zn was medium, and it was high for Cd in the dust of Shenyang City. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the extent of the risk of lead (Pb) and cadmium (Cd) in the soil and wheat plants grown around the Zanjan cement factory in Northwest Iran and to assess the accuracy of soil regulatory standards in reflecting the potential risk of these pollutants. A total of 73 surface (0–20 cm) soil samples and 31 wheat plant samples were collected and analyzed for their Pb and Cd contents. Statistical analyses revealed that the soil Pb and Cd concentrations varied from 1.2 to 240.0 milligram per kilogram (mg kg−1) and below the detection limit to 27.5 mg kg−1, respectively. Additionally, the wheat grain content of these metallic pollutants ranged from below the detection limit to 3.5 and 1.6 mg kg−1, respectively, indicating that certain wheat samples were polluted with Pb, Cd, or both. Spatial analyses highlighted the significant role of the cement factory in spreading substantial amounts of HMs into the soil. By comparing the soil Pb and Cd total concentrations to their respective national regulatory standards, it was observed that 26.3% and 37.2% of the study area, respectively, were classified as polluted. Integrating the interpolated maps of soil Pb and Cd concentrations and identifying sites in which at least one pollutant exceeded its regulatory standard showed that a greater proportion of the area (42.3%) should be considered polluted. Finally, after accounting for sites in which either the soil was polluted and/or wheat grain content of Pb or Cd exceeded the threshold value of 0.2 mg kg−1, 67.4% of the area was classified as polluted. The findings suggest that thematic maps prepared for individual pollutants are inadequate for pinpointing the potential risk of soil pollution with HMs. Therefore, it is crucial to consider both the soil and plant aspects when assessing the risk of HM pollution in agricultural lands. [ABSTRACT FROM AUTHOR]

Most of Africa's illegal mining operations are conducted in rural areas, but along the Red Sea coast, they primarily occur in the Eastern Desert, where they are regarded as the major source of revenue. Soil samples were collected and examined at an illegal gold mining site in the far south of Egypt's Eastern Desert to determine the toxicity levels of eight heavy metals for pollution load index (PLI), Igeo, and health (Au, Ag, As, Hg, Ni, Cr, Zn, and Pb). The methodology used in this study was categorized into fieldwork with restricted rules within the visit, soil samples collected from the field, chemical analyses for heavy metals, and statistical analyses by applying six equations to define the environmental status of the study area. It was found that the PLI increases contamination as an environmental risk grade, Igeo, reaches grade 6, which is highly contaminated, and the average hazard index (HI) for the individual elements is high (>0.01). The health risk assessment results for Ni and Cr showed that oral intake was the main mode of exposure to heavy metals in the tailings of illegal mines. In addition, the average levels of As, Hg, Cr, Ni, Pb, and Zn were higher than the equivalent background levels for soils. Thus, adult cancer risk (CR) exceeds the permissible level of 10−4. The illicit mining activities in the Eastern Desert also resulted in heavy metal contamination with substantial noncarcinogenic hazards for As and Zn, necessitating urgent remediation. [ABSTRACT FROM AUTHOR]

Sebkhat Soliman included in the Ramsar Convention is a wetland of international importance. This area is of great ecological interest considering the quality and the richness of the flora and the diversity of the avifauna. This site receives a large amount of water through the EL Bey River. In order to assess the levels of contamination, concentrations of six heavy metals, including Cr, Cu, Pb, Ni, Mn, and Zn, were examined in 25 surface sediment samples from El Bey Wadi. These concentrations, which were expressed in mg/kg of dry weight, showed that Pb ranged from 5.52 to 41.66, Zn from 26.94 to 1471.89, Cu from 91.97 to 260.05, Ni from 9.35 to 140.45, Cr from 25. It's important to note that the highest metal concentrations have been found in site 5 which is frequently exposed to local industrial pollutant sources and in sites that are frequently inundated by river water that is carrying away industrial waste from the cities of Grombalia and Bou-Argoub. The mean EF values for Cu, Mn and Ni were between 3 and 5 in the sediments of the El Bey River, suggesting moderate enrichment, while the mean EF values for Pb, Zn and Cr indicating respectively moderate to severe enrichment and very severe enrichment. CF values for Cr, Cu and Zn were > 6 in sediments taken from the fifth site, which denotes a very high contamination by these metals. At site 5, PLI value (4.09), reflecting that its sediment is heavily polluted. Hierarchical cluster analysis-based complementary statistical methods have demonstrated that Mn is lithogenic and other analyzed metals are anthropogenic. [ABSTRACT FROM AUTHOR]

Quarries are regarded as crucial cornerstones of national economic development in Palestine. But they also have detrimental effects on the ecosystem and biological resources. Determination of the amount of heavy metals (chromium, cadmium, and lead) in quarries stumps is the main objective of the current research study. To accomplish this, 20 quarry stump samples were collected from four distinct regions of the Hebron Governorate in Palestine, using the quadrat method, and they were afterward calorimetrically assessed using a UV-visible spectrophotometer and pollution indices. The results reveal that the stumps possess Cr and Pb concentration below the international declared levels (1–1000 mg/l and 15–40 mg/l, respectively), while the Cd is above the declared level (0.2 mg/kg). The Cr and Pb content ranges from 0.128 to 0.611 mg/L and 0.125 to 0.779 mg/L, respectively. On contrary, the Cd contents varies from 0.362 to 8.572 mg/L in Hebron governorate. This level of Cd content, somehow, locate above their declared level by the international standards. In addition, the heavy metals content seems to be site-specific in the selected regions in Hebron governorate. The risk of cadmium is due to its high concentration, while the risk of Pb is because of its high toxicity. Moreover, the four regions are considered as uncontaminated and are clean based on PI Nemerow for Cr and Pb, but not for Cd. In conclusion, working on quarries in Hebron governorate is still safe from the levels of heavy metals point of view. However, more control and restriction must be implanted in order to mitigate its environmental and health consequences. Moreover, more research is needed to assess the occurrence of other heavy metals and their consequences on biological life and environmental issues. [ABSTRACT FROM AUTHOR]

This study was conducted in five randomly selected small-scale mining communities in the Amansie West District of Ashanti Region, Ghana to assess the impacts of small-scale mining activities on heavy metal presence in three different land use types (mined site, farmland and forest area). Using a random sampling design, a total of 60 soil samples were collected from 0–20 cm depth and analyzed for soil heavy metals: arsenic (As), cadmium (Cd), lead (Pb), mercury (Hg) and copper (Cu) using Two-way ANOVA. Heavy metal concentrations for As (5.571 mg/kg), Cd (0.002 mg/kg), Cu (1.158 mg/kg), Pb (0.076 mg/kg) in the communities did not exceed the FAO/WHO permissible limits with the exception of Hg concentrations for the respective communities (0.68 mg/kg, 1.07 mg/kg, 1.26 mg/kg, 1.28 mg/kg, 17.03 mg/kg) whose levels were 2.3 to 56.8 times higher than FAO/WHO permissible limits (0.3 mg/kg). The distribution of heavy metals in the soil was not uniform across the different land use types in the mining landscape. Differences in heavy metal concentrations were significant (p <.05) at the community, land use and their interaction (community*land use) levels with the exception of As concentration at the land use level (p >.05). The study concludes that soils of the major land use types in the study area (mined sites, farmlands and forest area) are all contaminated by Hg accumulation. Therefore, effective rehabilitation of mined sites in mining-plagued-communities should include measures for removing mercury from the soil. [ABSTRACT FROM AUTHOR]

To gain insights into the spatial distribution, ecological risk and origins of heavy metals in surface sediments of lacustrine ecosystems in Cameroon, the content of 7 trace metals (Fe, Cr, Zn, Cu, Ni, Pb and Cd) in sediments from 60 sampling stations in 5 lacustrine environments of different formation contexts. The selected metals were investigated based on inductively coupled plasma mass spectrometry. The results revealed that the average concentrations of Cr, Cu and Cd were higher than the geochemical Threshold values. On the basis of the spatial variation, the studied metals vary quantitatively in the following order: Fe > Cr > Zn > Cu > Ni > Pb > Cd. The calculated enrichment factor (EF) and geo-accumulation index (Igeo) showed that, sediments from large cities and industrial sites had moderate enrichment (3 < EF ≤ 5) and were moderately to severely contaminated (2 < Igeo < 3) while those from low population and rural areas had minor enrichment (1 < EF ≤ 3) and were moderately contaminated (1 < Igeo < 2). With regards to cumulative pollution, the pollution load index (PLI) and the sediment pollution index (SPI) coupled with the potential ecological risk factor (Er) and the potential ecological risk index (RI), the sediments of the lakes are polluted (SPI and PLI > 1) to some extent but with a low ecological risk (Er < 40 and RI < 150). The results of Pearson correlation, principal component analysis (PCA), and cluster analysis (CA) identified three main sources: Ni would have a natural source; Pb from anthropogenic sources, and the other metals (Fe, Cr, Zn, Cu, and Cd) could have a mixed source (anthropogenic and natural). These findings serve as a scientific foundation for the advancement and use of these lake environments, which are the most attractive sites. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) are ubiquitous in terrestrial and marine environments. This research work studied the occurrence, distribution of MPs and heavy metals associated with these MPs in soils of different land- use types viz. residential, commercial, and industrial areas. We identified 15 types of MP polymers, of which polypropylene (15.51%), polyethylene (12.28%), polyamide (9.57%) were dominant. MPs abundance ranged from 8.54 × 104 to 8.51 × 105 particles/kg of soil. Average abundance of MPs in the three fractions viz. < 1 mm, 1–2 mm, and 2–5 mm were 1.85 × 105, 1.31 × 105, and 697.5 particles/kg of soil, respectively. Among the three land use types, MPs abundance in < 1 mm and 1–2 mm soil fractions were significantly higher in residential areas than that in commercial and industrial areas, i.e. <1 mm: 3.4 × 105, 1.26 × 104 and 9.0 × 104, and 1–2 mm: 2.35 × 105, 8.36 × 104, and 7.50 × 104 particles/kg, respectively, for residential, commercial and industrial areas respectively. The average concentration of Cr, Fe, Mn, Cd, Co, Ni, Cu and Pb in soils were 31.79, 11047.29, 423.92, 0.05, 11.86, 17.53, 125.95 and 28.29 mg/kg, respectively, whereas that in MPs were 6.27, 2181.64, 277.36, 0.24, 6.43, 8.29, 47.05 and 9.24 mg/kg, respectively. Concentration of Cd sorbed on MPs was higher than those found in soils. Also, Pb and Cd in MPs were positively correlated to MPs abundance, indicating MPs can be vectors of heavy metals in soils. The synergistic effect of MPs and heavy metals might put soil organisms at risk. [ABSTRACT FROM AUTHOR]

Long-term application of organic and inorganic fertilizers increases the possibility of contamination of greenhouse soils with heavy metals. This study investigated heavy metals (Cd, Co, Cu, and Zn) adsorption-desorption under mono and competitive systems in 10 soils from agricultural and greenhouse soils in western Iran. In most of the studied soils, the values of the Freundlich distribution coefficient (Kf) of Cu were higher than other heavy metals, indicating that Cu is maintained by the soils stronger than Cd, Co, and Zn. Based on the average Kf, the selectivity sequence of heavy metals in agricultural and greenhouse soils was ordered as Cu > Zn > Cd > Co in both mono and competitive systems. In general, greenhouse soils had lower Kf for heavy metals compared with agricultural soils, indicating the vulnerability of greenhouse soils to heavy metals leaching. In desorption experiments, the percentage of heavy metal desorption increased as the concentration of added heavy metals increased in both systems (except Cu in the mono-heavy metal system). The findings revealed that continuous vegetable production and the application of organic and inorganic fertilizers in these greenhouse soils may cause changes in soil properties and heavy metal mobility, posing hazards to human health and groundwater quality. [ABSTRACT FROM AUTHOR]

This study was conducted in a greenhouse pot experiment to assess the effects of biochar (BC) or activated carbon (AC) alone or in combination with arbuscular mycorrhizal fungus (AMF) Glomus mosseae or acid-producing bacteria (BA) Bacillus polymyxa on plant growth, EDTA-extractable Cd and Pb, and contents of heavy metals (Cd and Pb) and nutrients (Ca, Mg, K, and P) in maize (Zea mays L.) grown on sewage wastewater contaminated soil. The results showed that most treatments with BC, AC, or its co-application with microbial inoculation led significantly to greater nutrient uptake and promoted growth of maize than non-treated plants. Additionally, the soil additives used decreased the amounts of EDTA-extractable Cd (by 28.7%-100%) and Pb (by 22.8%-94.3%). The applied treatments caused significant decreases in Cd concentrations and the bioconcentration factor (BCF) of Zea mays. The highest shoot Cd reduction was observed for AC (53%), followed by AC+BA (36.9%) > AMF (34.5%) > AC+AMF (28.5) > BA (28.3%) > BC+BA (26.1%) > BC (22.7%). However, more Cd was accumulated in the roots of plants treated with AMF by 63.7% with a lower value of translocation factor (TF) compared to control soil. In contrast, the treatments increased the levels of Pb in the maize plants, and BC coupled with AMF showed the greatest Pb accumulation. It could be concluded that the investigated additives can be applied as immobilizing agents for Cd in the soil but maize plants as phytoextractants for both metals in sewage-contaminated soil are not feasible, as indicated by insufficient phytoextraction efficiency. [ABSTRACT FROM AUTHOR]

To understand the source, distribution and degree of pollution of heavy metals in the soil around a plateau municipal solid waste incineration plant, a municipal solid waste incineration plant in Lhasa was taken as the research object in this study. The soil surrounding the facility was sampled, and the contents of heavy metals, including Cu, Pb, Zn, Cr, Ni, Cd, As, and Hg, in the soil were analyzed. Then, heavy metal pollution and risk assessments were conducted using the geoaccumulation index method, Nemerow index method, and potential ecological risk index method. Additionally, correlation and principal component analysis were used to determine the correlation between heavy metals in the soil and their sources of pollution. The results showed that based on the Nemerow comprehensive pollution index, the soil surrounding the incineration plant generally had a low level of pollution. Through the analysis of individual potential ecological risk indices, it was found that only the heavy metal Cd presented moderate potential risks, while the other seven heavy metals had mild potential risks. The average value of the total potential risk coefficient was 107.31, which was less than 150, indicating that there was a slight potential risk associated with the soil around the incineration plant. There was significant correlation between six heavy metals, namely, Cu, Pb, Zn, Cr, Ni, and Cd, in the soil around the incineration plant. Their pollution sources were similar, and their levels tended to be affected by the incineration plant. However, there was no significant correlation between the heavy metals As and Hg and the other six heavy metals. These two heavy metals had independent sources of pollution but were also influenced by human activities. [ABSTRACT FROM AUTHOR]

Pollution in the Noyyal river is a well-known and documented issue and recently, heavy metal contamination has become a serious issue requiring immediate attention. So, to understand the severity of heavy metal contamination in the surface water and sediments of the Noyyal river, a comprehensive study was conducted. About 27 surface water samples and 25 sediment samples were collected at different sites along the Noyyal river. The concentrations of heavy metals were determined using inductively coupled plasma mass spectrometry (ICP-MS). The Noyyal river's surface water showed significant variations with nickel (Ni), copper (Cu), and zinc (Zn) concentrations exceeding acceptable limits for irrigation and aquatic life. Lead (Pb) concentrations were within acceptable limits for irrigation but potentially harmful to aquatic organisms. Noyyal river sediments also contained varying concentrations of chromium (Cr), copper (Cu), nickel (Ni), zinc (Zn), and gallium (Ga). Various assessment indices were employed to assess the eco-biological and human health risks associated with heavy metal contamination. The results highlighted alarming ecological and biological risks due to the accumulation of trace metals. Sediments exhibited high ecological risk (ERI values ranging from 43.81 to 371.43), while surface water samples intended for irrigation and aquatic purposes displayed extreme risks (ERI values exceeding 1200) to agricultural crops and aquatic organisms. The probability of toxicity to aquatic organisms, particularly benthic communities, was over 76% according to the biological risk assessment. The study also identified potential non-carcinogenic risks associated with metals like chromium (Cr), copper (Cu), nickel (Ni), and zinc (Zn) in the sediments. Moreover, elevated levels of Cr, Ni, and Cu in both sediments and surface water were likely to pose significant carcinogenic risks to exposed adults. Additionally, the heavy metal toxicity load in both surface water and sediments exceeded permissible limits, highlighting the urgent need for efficient removal strategies. [ABSTRACT FROM AUTHOR]

In India, ∼30% of total land is degraded due to pollution, salinization, and nutrient loss. Change in soil-quality at urban waste-dumping site prior and after cow-dung amendment was compared with control agriculture soil. The soil at waste-dumping site had elevated pH, EC, temperature and lowered OC and NPK concentrations when compared to control. Polymetallic pollution of Cr, Cd, Pb, and Ni beyond permissible limits was obtained. Cow-dung amendment restored soil physicochemical properties at the waste-dumping site, with increasing soil moisture, CEC and OC; however, a slight change in soil bulk-density and heavy-metal concentration post-amendment was noted. The seven natural colonizers present at the waste-dumping site accumulated more metals in roots than shoots. Datura innoxia had maximum bioaccumulation of Cr, Calotropis procera of Cd and Ni and Parthenium hysterophorus of Pb in roots. All these plants had Bioacccumulation factor (BAfroot )>1 and translocation factor (Tf) <1 for Cd and serve as its phytostabilizer except Calotropis procera which had BAfroot >1 and Tf >1 and is identified as a phytoextractor for Cd. Cow-dung amendment alone appeared to be insufficient and additionally the revegetation of natural colonizers is recommended for effective reduction in heavy metal load and improving overall soil health at wasteland. Such eco-restoration may also minimize risks to biodiversity in India. Novelty statement: The novelty of the work lies in revegetation of natural colonizers at polluted wasteland to reduce heavy metal load and improve overall soil health. Calotropis procera, Datura innoxia, Parthenium hysterophorus, and S. nigrum showed maximum bioaccumulation of Cr, Cd, Pb, and Ni. The work confirms C. procera as non-edible, fast growing natural colonizer as potential phytoextractor for Cd and taken into consideration to effectively restore heavy metals polluted wasteland. [ABSTRACT FROM AUTHOR]

Arbuscular mycorrhizal fungi (AMF) have different biological mechanisms to alleviate stressful conditions in heavy metals (HMs) polluted soil. These mechanisms were widely assessed under controlled/greenhouse conditions, but scarcely studied at pilot or territory scale. The aim of this study was to evaluate the response of two Rhizophagus intraradices strains isolated from soils with different histories of pollution, in association with Senecio bonariensis plants, growing in an engineering vegetal depuration module filled with artificially HMs polluted substrate. Plants inoculated with GC3 strain uptook low amounts of HMs and translocated them to shoot biomass. Heavy metals (Mg, Zn, Mn, Cr, Cu and Ni) and macronutrients (Ca, K, S and P) were accumulated in roots of S. bonariensis when inoculated with GB8 strain, limiting their translocation to the shoot. Uninoculated plants showed high translocation of all studied elements to shoot tissues. Concluding, tested R. intraradices strains have exhibited different phytoprotection mechanisms under extremely toxic concentrations of HMs. Moreover, the development of the assay at such a high Technological Readiness Level represents a novel contribution in this field of study. [ABSTRACT FROM AUTHOR]

The efficacy of SA foliar use on Pb and Ni-induced stress tolerance and phytoremediation potential by Portulaca oleraceae L. were assayed as a factorial trial based on a completely randomized design with four repetitions. The factors included; SA foliar application (0 and 100 µM) and HMs application of Pb [0, 150, and 225 mg kg−1 soil Lead (II) nitrate] and Ni [0, 220, and 330 mg kg−1 soil Nickel (II) nitrate]. Plant height, stem diameter, shoot and root fresh and dry weight, photosynthetic pigments, total soluble proteins, palmitic acid, stearic acid, arachidic acid, and some macro- and micro-elements contents were reduced facing the HMs stress, but SA foliar application ameliorated these traits. HMs stress increased malondialdehyde content, total antioxidant activity, total flavonoids, phenolics, and linolenic acid content, while SA foliar application declined the mentioned parameters. Moreover, shoot and root Pb and Ni content enhanced in the purslane plants supplemented by SA under the HMs stress. The results propose SA foliar application as a reliable methodology to recover purslane growth characters and fatty acid profiles in the soil contaminated with the HMs. The idea is that SA would be potentially effective in alleviating HMs contamination while keeping reasonable phytoremediation potential. NOVELTY STATEMENT: There is no information available in previous literature about the impact of Pb and Ni on the phytochemical profile of oil in purslane. Therefore, in this report, we evaluated the purslane plant's growth and physiological responses and its seed oil's components in response to SA foliar application under conditions of Pb and Ni over-availability. Additionally, we examined the role of SA treatment in improving phytoremediation of Pb and Ni. [ABSTRACT FROM AUTHOR]

In this study, the results showed that the soil radioactivity concentrations of 232Th and 40K were higher than the reference values given by UNSCEAR, but still within radiologically safe limits. Heavy metal concentrations were within allowable limit according to Vietnamese standards. Radioactivity and metal concentrations in the topsoil did not increase compared with the 30 cm depth after a period of operation. After one year of operation, the gamma dose rates of the area around the plant showed no difference according to the one-way ANOVA test (p = 0.944). The results indicated that after a period of operation, the coal-fired thermal power plant did not shown any significant impact of radioactivity and metals from the fly ash on the surrounding environment. [ABSTRACT FROM AUTHOR]

Starting in the mid 1970's, researchers, industry leaders, and residents collaborated on one of the world's largest regreening programs in the industrial region of Sudbury, Canada. The Sudbury Regreening Recipe included the application of crushed dolomitic limestone, nitrogen–phosphorus–potassium fertilizers, grass–legume seed mixtures across 8200 ha, and subsequent tree planting across 25 000 ha of acidic metal-contaminated land. The current study evaluated shifts in understory vegetation diversity and soil geochemistry on a chronosequence of sites treated the same way between 1982 and 2012. Fifty-six plant species were identified across the 24 sites, only four of which were planted in the initial remediation effort. Key factors influencing plant community composition and diversity were related to shifts in soil properties over time: bulk density, LFH layer depth, and mineral soil horizon pH. Plant communities differed with stand age and rocky sites had significantly different plant communities and lower canopy cover than less rocky sites. Mineral soil horizon pH increased with age, reflecting the movement of applied dolomite in soil. Despite high concentrations of total copper and nickel in soil, plant succession patterns were generally similar to those in naturally recovering forests demonstrating the overall success of the restoration program. [ABSTRACT FROM AUTHOR]

This study examined the heavy metal content in dust storm samples from Erbil, Iraq, along with four other locations. Using ICP-MS, Cd, Ni, Cr, Hg, Pb, Zn, Mn, Cu, Co, Fe and As were determined. The health risks due to exposure to these metals through ingestion, inhalation and dermal contact were assessed for both adults and children. Non-carcinogenic risks were evaluated using the hazard quotient (HQ) and hazard index (HI). Children faced a cumulative risk with HQ > 0.2 for As and Cr and HI > 1. The carcinogenic risk was measured using the carcinogenic risk factor (CRF), which fell below 10–6, indicating low cancer risk. However, children had a higher cancer risk (10−4 to 10−6) for As. The pollution indices revealed varying pollution levels from unpolluted to moderately polluted in the studied areas. Overall, this study highlights potential health risks associated with heavy metal exposure during dust storms, particularly for children, and emphasises the importance of addressing these concerns to safeguard public health. [ABSTRACT FROM AUTHOR]

The current study focused on quantifying hazardous heavy metals (As, Cd, Cr, Pb, Ni, and Zn) in soil-rice systems near the Buriganga River in Bangladesh to assess their impact on human health and the environment. The mean concentrations of As, Cd, Cr, Ni, and Zn in soil exceeded FAO/WHO acceptable limits, and the metal pollution index (MPI) indicated that all soil samples collected from the rice fields were severely polluted (MPI˃30) than water and rice grain samples. According to the sum of pollution index (SPI) by studied metals, rice grains collected from Kamrangirchor (29.36), Dhakauddan (28.75), and Bosila (18.08) were severely polluted. Mean Bio-concentration factors (BCFs) and Transfer factors (TFgrain/soil) in rice grains were in the following order: Cd (6.034) > Zn (1.752) > Pb (0.697) ˃ Ni (0.666) > Cr (0.135) > As (0.037), and Cd (1.150) > Zn (0.421) > Ni (0.112) ˃ Pb (0.072) > Cr (0.015) > As (0.034) respectively indicating higher accumulation of Cd in rice grain than others toxic heavy metal. The potential ecological risk index (RI) showed that except for water in Kamrangirchar and Keraniganj rice fields, all other rice fields soil and water samples did not pose severe ecological pollution (RI˂110) by different toxic heavy metals. Health risk assessment showed that rice grains are unsafe for human consumption as the carcinogenic health risk (CHR˃10-3) and non-carcinogenic health risk (HI ˃1) quotients seem more than the safe level in all samples collected from rice fields surrounding the Buriganga River. Findings show that heavy metal concentrations are high in rice fields near the Buriganga River, endangering the environment and consumer health. [ABSTRACT FROM AUTHOR]

The Fundão dam collapse in 2015 resulted in the largest environmental disaster in Brazil's history with the release of tons of ore tailings mainly in aquatic environments. Amphibians are susceptible to contamination and they typically develop in aquatic and terrestrial habitats, making them useful indicators of environmental impact. Nonetheless, the effects of mining on amphibians are much overlooked compared with other waterborne organisms. We examined the impact of the disaster on the generalist treefrog Boana albopunctata (Spix, 1824) by measuring fluctuating asymmetry (FA) and liver mass in specimens collected in southeastern Brazil, before the disaster (2014) and at two time points after (2018 and 2022). Specimens collected in 2022 had lower FA levels in their tympanic area, which indicates the selection of individuals with more symmetrical eardrums across generations. We found liver hypertrophy after the accident, indicating the resilience of this biotransformative organ after heavy metal exposure but with likely physiological damage. This study is the first to demonstrate the impact of the Fundão dam rupture on an amphibian population living in the affected area. Our findings highlight the diverse impacts of mining on organisms and suggest that studies with amphibians can contribute in comprehending the magnitude of this and similar disasters. [ABSTRACT FROM AUTHOR]

Analyzing and rapidly screening the phenomenon of soil heavy metal exceedance remains a challenge for the fusion technology of X-ray fluorescence (XRF) and visible near infrared spectroscopy (visNIR). To address this, a new XRF-visNIR fusion method based on Gramian Angular Summation (GAS) transformation and Principal Component Analysis Network (PCANet) feature extraction is proposed. This method transforms XRF and visNIR data into two-dimensional images through GAS conversion, followed by feature extraction using PCANet. This reduces data dimensions and extracts important information about soil heavy metals. In the experimental phase, a large number of soil samples were collected from the Hongfeng Lake area and tested for spectral information using XRF-visNIR. By constructing and training a deep learning network, soil heavy metal pollution was classified and assessed. The results show that this method has achieved significant results in the analysis of soil heavy metal exceedance. The optimized GASF_PCANet_CNN can rapidly and accurately identify seven kinds of heavy metal pollution exceedance (Pb, Cd, As, Cr, Cu, Zn, and Ni). Deployed on an embedded platform, it can achieve quick feedback of screening results, with an average accuracy, average recall rate, average precision, and average F1 score of 95.07%, 95.90%, 95.17%, and 95.53%, respectively. The XRF-visNIR soil heavy metal analysis method based on GAS transformation and PCANet proposed in this study provides an efficient and reliable analytical means for monitoring soil heavy metal exceedance, actively promoting soil pollution management and environmental protection work. [ABSTRACT FROM AUTHOR]

The rapidly growing electroplating industry has led to the discharge of large amounts of wastewater containing heavy metals and organic acids. Innovative techniques are required for the efficient and effective treatment of such effluents. The present work explored electroplating wastewater treatment through new TiO2-NTs/GO/SnO2 electrodes by electro-oxidation (EO) in batch and once-through continuous system. A new electrode with excellent oxidation ability was successfully fabricated by introducing a SnO2 outer layer through a simple anodization method. Moreover, a response surface methodology (RSM)-Box-Behnken design (BBD) model was used to optimize the responses. The effects of operating conditions, i.e. pH (3–9), current (0.1–0.9 A), and time (30–180 min), on the efficiency of the process were investigated. With optimum conditions, 97.1% Cu, 95.7% Zn, 91.2% COD degradation, and 7.32 kWh/m3 energy consumption were achieved. A once-through continuous setup working at a flow rate of 5–20 mL/min was performed under optimal conditions. The electrodes remained durable even after 50 cycles. The contribution of several reactive species to the EO was examined in the presence of scavengers. Moreover, according to a toxicity study, EO can detoxify electroplating effluents. Hence, this EO process, which is low-cost and highly efficient, can be applied to the treatment of electroplating wastewater. [ABSTRACT FROM AUTHOR]

The adsorption of weighty metal particles from contaminated water sources has garnered significant attention due to its critical role in environmental remediation and ensuring safe drinking water. Heavy metal ions can be removed from water using conventional adsorbents such as activated zeolites; however, these materials have low absorption and slow kinetics. To solve these issues, carbon-based adsorbents that exhibit easy synthesis, high porosity, design ability, and stability have been proposed. In this review, a carbon-based adsorbent, named M-NC, and graphene oxide were created for the particular evacuation of weighty metal particles. To increase the potential for Heavy Metals (HM) immobilization, sulfide-modified biochar was created via a process called synchronous carbon layer epitome. A hypothetical physicochemical and thermodynamic examination of the adsorption of weighty metals Zn2+, Cd2+, Ni2+, Ag2+, Pb2+ and Cu2+ on carbon-based adsorbents was done with factual material science fundaments. The biochar with large surface areas is utilized to eliminate weighty metal particles, quite possibly the most significant heavy metal pollutants, from aqueous solutions. The limit of the adsorbent for eliminating weighty metal ions was concentrated on utilizing Langmuir adsorption isotherm under ultrasound-helped conditions. The Mesoporous Silica Nanoparticles (MNCs) can be applied to the Langmuir model and pseudo-second-order kinetics. It is possible to use the Langmuir and second-order kinetic equations to accurately explain the adsorption method. Thermodynamic limitations were also envisioned because sorption is exothermic when it happens spontaneously. A homogeneous measurable physical science adsorption typically was utilized to describe and analyze the experimental heavy metal removal isotherms at 30°C and pH5 utilizing adsorbents produced by pyrolysis of biomasses (broccoli stalks). The experimental results were investigated in terms of Langmuir and pseudo-2nd-order kinetic equations, Freundlich and isotherm models. The outcome of pH, initial heavy metal ion concentration, contact time, and adsorbent dosage regarding the adsorption capacity and removal efficiency of Pb2+ and Cd2+ on the hydrogel was examined. This study contributes to the advancement of information in the ground of environmentally friendly heavy metal removal techniques, specifically focusing on the usage of biomass-based adsorbents. These findings have the potential to address the need for effective solutions in water purification and environmental cleanup efforts. [ABSTRACT FROM AUTHOR]

Copper tailings are a common byproduct of copper production, containing high levels of heavy metals which are released into the environment. Conventional methods have historically prioritized copper recovery, and often overlooking the leaching of other valuable elements. However, the rising demand for nonferrous metals necessitates understanding their leaching behavior from copper tailings. This study examined the atmospheric leaching of Cu, Fe, Pb, Zn, and CuO from a polymetallic tailing ore. Leaching recoveries of 63.5% for Cu, 97.5% for CuO, 1% for Fe, and 100% for Zn were achieved under the optimum conditions of 0.5 M sulfuric acid concentration, 25% solids percentage, 65°C, stirring speed of 100rpm, particle size of 75 µm within 30 minutes. Results indicated that the dissolution of oxide minerals such as CuO and ZnO was significant; however, copper sulfides need oxidant to be dissolved. In this condition, iron oxides and silicates were partially reacted by sulfuric acid, and Pb-bearing minerals formed lead sulfate. The presence of iron and lead-bearing minerals in the leaching residue was confirmed by XRF, XRD, and SEM analyses, and was in agreement with the information displayed in the Eh-pH diagrams. [ABSTRACT FROM AUTHOR]