Search

Plasmonics offer an exciting way to mediate the interaction between light and matter, allowing strong field enhancement and confinement, large absorption and scattering at resonance. However, simultaneous realization of ultra-narrow band perfect absorption and electromagnetic field enhancement is challenging due to the intrinsic high optical losses and radiative damping in metals. Here, we propose an all-metal plasmonic absorber with an absorption bandwidth less than 8nm and polarization insensitive absorptivity exceeding 99%. Unlike traditional Metal-Dielectric-Metal configurations, we demonstrate that the narrowband perfect absorption and field enhancement are ascribed to the vertical gap plasmonic mode in the deep subwavelength scale, which has a high quality factor of 120 and mode volume of about 10^-4*({\lambda}/n)^3 . Based on the coupled mode theory, we verify that the diluted field enhancement is proportional to the absorption, and thus perfect absorption is critical to maximum field enhancement. In addition, the proposed perfect absorber can be operated as a refractive index sensor with a sensitivity of 885nm/RIU and figure of merit as high as 110. It provides a new design strategy for narrow band perfect absorption and local field enhancement, and has potential applications in biosensors, filters and nonlinear optics.

The parity-time symmetry (PT symmetry) breaking phenomenon is investigated in a coupled nanobeam cavity system. An exceptional point is observed during the tuning of the relation of the gain/loss and coupling strength of the closely placed nanobeam pairs. The PT symmetry concept can be applied to realize unidirectional light propagation and single mode operation lasers, which may allow for a new way to harness the optical signal in photonic integrated circuits. Otherwise, operating at this particular exceptional point, sensitivity of tiny perturbation detection can be enhanced greatly compared with conventional sensors., Comment: 13 pages and 7 figures

Invisible cloaking is one of major outcomes of the metamaterial research, but the practical potential, in particular for high frequencies (e.g., microwave to visible light), is fatally challenged by the complex material properties they usually demand. On the other hand, it will be advantageous and also technologically instrumental to design cloaking devices for applications at low frequencies where electromagnetic components are favorably uncoupled. In this work, we vastly develop the bilayer approach to create a three-dimensional magnetic cloak able to work in both static and dynamic fields. Under the quasi-static approximation, we demonstrate a perfect magnetic cloaking device with a large frequency band from zero to 250 kHz. The practical potential of our device is experimentally verified by using a commercial metal detector, which may lead us to having a real cloaking application where the dynamic magnetic field can be manipulated in desired ways., Comment: 16 pages and 5 figures

We theoretically analyze surface magnetoplasmon modes in a compact circular cavity made of magneto-optical material under a static magnetic field. Such a cavity provides two different physical mechanisms for the surface wave to circulate in a unidirectional manner around the cavity, which offers more freedom to realize one-way surface wave. We also show the interaction between this one-way cavity and waveguides, through an example of a circulator, which lays the fundamental groundwork for potential nonreciprocal devices., Comment: 5 pages, 5 figures. Add some text about the cutoff frequency at the end of Page 2. Add some text about loss under Figure 5

Thermally-tuning silicon micro-cavities are versatile and beneficial elements in low-cost large-scale photonic integrated circuits (PICs). Traditional metal heaters used for thermal tuning in silicon micro-cavities usually need a thick SiO2 upper-cladding layer, which will introduce some disadvantages including low response speed, low heating efficiency, low achievable temperature and complicated fabrication processes. In this paper, we propose and experimentally demonstrate thermally-tuning silicon micro-disk resonators by introducing graphene transparent nano-heaters, which contacts the silicon core directly without any isolator layer. This makes the graphene transparent nano-heater potentially to have excellent performances in terms of the heating efficiency, the temporal response and the achievable temperature. It is also shown that the graphene nano-heater is convenient to be used in ultrasmall photonic integrated devices due to the single-atom thickness and excellent flexibility of graphene. Both experiments and simulations imply that the present graphene transparent nano-heater is promising for thermally-tuning nanophotonic integrated devices for e.g. optical modulating, optical filtering/switching, etc.

Plasmonic beam collimation effect has been thoroughly investigated based on the well-known nanometer-scale bull's eye structure formed by complex and high-cost fabrication processes. In this work, we report our effort for attaining beam collimation using an anisotropic metamaterial (AMM) slab that consists of a stack of alternating metal/dielectric layers and an integrated top metal grating. The results show that AMM slab allows creating the beam collimation effect similar to that of the bull's eye structure, an enabling technology for practical application due to its simple architecture and cost benefits. The excitation of surface plasmons at the AMM/air interface is derived. The structure of the AMM slab and its impact on beaming performance were analyzed using the effective medium theory and Finite Element Method., Comment: 17 pages, 4 figures

For the Casimir piston filled with an inhomogeneous medium, the Casimir energy is regularized and expressed with cylinder kernel coefficients by using the first-order perturbation theory. When the refraction index of the medium is smoothly inhomogeneous (i.e., derivatives of all orders exist), logarithmically cutoff-dependent term in Casimir energy is found. We show that in the piston model this term vanishes in the force and thus the Casimir force is always cutoff-independent, but this term will remain in the force in the half-space model and must be removed by additional regularization. We investigate the inhomogeneity of an exponentially decaying profile, and give the first-order corrections to both free Casimir energy and Casimir force. The present method can be extended to other inhomogeneous profiles. Our results should be useful for future relevant calculations and experimental studies., Comment: 7 pages, 2 figures

In past years, triggered by their successful realizations in electromagnetics, invisible cloaks have experienced rapid development and have been widely pursued in many different fields, though so far only for a single physical system. In this letter we made an unprecedented experimental attempt to show a multidisciplinary framework designed on the basis of two different physical equations. The proposed structure has the exceptional capability to simultaneously control two different physical phenomena according to the predetermined evolution scenarios. As a proof of concept, we implemented an electric-thermal bifunctional device that can guide both electric current and heat flux "across" a strong 'scatter' (air cavity) and restore their original diffusion directions as if nothing exists along the paths, thus rending dual cloaking effects for objects placed inside the cavity. This bifunctional cloaking performance is also numerically verified for a point-source nonuniform excitation. Our results and the fabrication technique presented here will help broaden the current research scope for multiple disciplines and may pave a prominent way to manipulate multiple flows and create new functional devices, e.g., for on-chip applications., Comment: 4 figures

Manipulating the circular polarization of light is of great importance in chemistry and biology, as chiral molecules exhibit different physiological properties when exposed to different circularly polarized waves. Here we suggest a graphene/dielectric-stacked structure, which has both the properties of a epsilon-near-zero material and the high Hall conductivity of graphene. The proposed sub-wavelength structure demonstrates efficient manipulation of circular polarization properties of light. In a quite broad frequency range and at a large oblique incidence angle, the present magnetically active structure is transparent for one circularly polarized wave, and opaque for another. Such an effect can be further tuned by changing the magnitude of the applied magnetic field and chemical potential of graphene., Comment: 20 pages, 4 figures

Electromagnetic absorbers have drawn increasing attention in many areas. A series of plasmonic and metamaterial structures can work as efficient narrow band absorbers due to the excitation of plasmonic or photonic resonances, providing a great potential for applications in designing selective thermal emitters, bio-sensing, etc. In other applications such as solar energy harvesting and photonic detection, the bandwidth of light absorbers is required to be quite broad. Under such a background, a variety of mechanisms of broadband/multiband absorption have been proposed, such as mixing multiple resonances together, exciting phase resonances, slowing down light by anisotropic metamaterials, employing high loss materials and so on., Comment: 26 pages, 12 figures

Extended from its electromagnetic counterpart, transformation thermodynamics applied to thermal conduction equations can map a virtual geometry into a physical thermal medium, realizing the manipulation of heat flux with almost arbitrarily desired diffusion paths, which provides unprecedented opportunities to create thermal devices unconceivable or deemed impossible before. In this work we employ this technique to design an efficient plate heater that can transiently achieve a large surface of uniform temperature powered by a small thermal source. As opposed to the traditional approach of relying on the deployment of a resistor network, our approach fully takes advantage of an advanced functional material system to guide the heat flux to achieve the desired temperature heating profile. A different set of material parameters for the transformed device has been developed, offering the parametric freedom for practical applications. As a proof of concept, the proposed devices are implemented with engineered thermal materials and show desired heating behaviors consistent with numerical simulations. Unique applications for these devices can be envisioned where stringent temperature uniformity and a compact heat source are both demanded., Comment: 14 pages, 5 figures

An ultracompact bi-sectional adiabatic tapered coupler, which is suitable for an adiabatic mode transformation between a common single mode SOI wire waveguide and a Si/III-V hybrid waveguide, are proposed for Si/III-V heterogeneous integration. Since the bi-sectional tapered coupler mimics a semi-3D taper and avoids exciting the unwanted high-order modes in the thick p-InP cladding layer (which is removed in the first tapered section), the length of the adiabatic mode coupler can be dramatically shortened. Taking into account the mask design and the fabrication tolerance, we design the tapered structure only in the III/V structure, while keeping the SOI wire waveguide straight. In the proposed structure, the length of the bi-sectional tapered coupler can be 9.5 {\mu}m with a large fundamental mode-coupling ratio (over 95%) in a bandwidth of ~100 nm, and provides 100 nm tolerance to misalignment, even when the BCB layer is as thick as 50 nm., Comment: 7 pages, 6 figures

A fluorescence system is developed by using several light emitting diodes (LEDs) with different wavelengths as excitation light sources. The fluorescence detection head consists of multi LED light sources and a multimode fiber for fluorescence collection, where the LEDs and the corresponding filters can be easily chosen to get appropriate excitation wavelengths for different applications. By analyzing fluorescence spectra with the principal component analysis method, the system is utilized in the classification of four types of green tea beverages and two types of black tea beverages. Qualities of the Xihu Longjing tea leaves of different grades, as well as the corresponding liquid tea samples, are studied to further investigate the ability and application of the system in the evaluation of classification/quality of tea and other foods.

We propose a polarization-insensitive and high-efficiency plasmonic silicon Schottky diode for detection of sub-bandgap photons in the optical communication wavelength range through internal photoemission. Our photodiode is based on a hybrid plasmonic silicon waveguide. It has a gold film covering both the top and the sidewalls of a dielectric silicon waveguide with the Schottky contact formed at the gold-silicon interface. An extensive physical model is presented in detail and applied to calculate and analyze the performance of our detector. By comparison with a diode with only top contact of gold, the polarization sensitivity of responsivity is greatly minimized in our photodetector with sidewall coverage of gold. Much higher responsivities for both polarizations are also achieved in a very broad wavelength range of 1.2-1.5 {\mu}m. Moreover, the Schottky contact is only 4 {\mu}m long, leading to a very small dark current. Our design is very promising for practical applications in high-density silicon photonic integration.

We propose an efficient multiband absorber comprising a truncated one-dimensional periodic metal-dielectric photonic crystal and a reflective substrate. The reflective substrate is actually an optically thick metallic film. Such a planar device is easier to fabricate compared with the absorbers with complicated shapes. For a 4-unit cell device, all of the four absorption peaks can be optimized with efficiencies higher than 95%. Moreover, those absorption peaks are insensitive to both polarization and incident angle. The influences of the geometrical parameters along with the refractive index of the dielectric on the device performance are discussed as well. Furthermore, it is found that the number of absorption peaks within each photonic band exactly corresponds to the number of the unit cells because the truncated photonic crystal lattices have the function of selecting resonant modes. It is also displayed that the total absorption efficiency gradually increases when there are more metal-dielectric unit cells placing on top of the metallic substrate. Our work is expected to have some potential applications in the areas of solar energy harvesting and thermal emission tailoring., Comment: This paper has been withdrawn by the author because one of the authors would like his name being only acknowledged

Autism spectrum disorder is a neuro-developmental disorder characterized by abnormalities of neural synchronization. In this study, functional near infrared spectroscopy (fNIRS) is used to study the difference in functional connectivity in left and right inferior frontal cortices (IFC) and temporal cortices (TC) between autistic and typically developing children between 8-11 years of age. 10 autistic children and 10 typical ones were recruited in our study for 8-min resting state measurement. Results show that the overall interhemispheric correlation of HbO was significantly lower in autistic children than in the controls. In particular, reduced connectivity was found to be most significant in TC area of autism. Autistic children lose the symmetry in the patterns of correlation maps. These results suggest the feasibility of using the fNIRS method to assess abnormal functional connectivity of the autistic brain and its potential application in autism diagnosis., Comment: 7 pages, 3 figures, fields: autism spectrum disorder, near inferred spectroscopy, functional connectivity

Light absorption plays an important role in many research areas. Here, we propose and demonstrate a thin ultra-broadband strong light absorber consisting of periodic taper arrays on a gold substrate., Comment: This paper has been withdrawn by the author due to rough explanations

In the past years quasi-conformal mapping has been typically used to design broadband electromagnetic cloaks. However, this technique has some inherit practical limitations such as the lateral beam shift, rendering the device visible or difficult to hide a large object. In this work we circumvent these issues by using strict conformal mapping to build the first isotropic cloak. Microwave near-field measurement shows that our device (with dielectric constant larger than unity everywhere) has a very good cloaking performance and a broad frequency response. The present dielectric approach could be technically extended to the fabrication of other conformal devices at higher frequencies., Comment: 5 figures

Transformation optics originating from the invariance of Maxwell's equations under the coordinate mapping has enabled the design and demonstration of many fascinating electromagnetic devices that were unconceivable or deemed impossible before [1-11], and has greatly contributed to the advancement of modern electromagnetism and related researches assisted with the development of metamaterials [12-15]. This technique has been extended to apply to other partial differential equations governing different waves [16-23] or flux [24-28], and has produced various novel functional devices such as acoustic cloaks [20-23] and Schrodinger's 'hat' [19]. In the present work we applied the coordinate transformation to the time-dependent heat diffusion equation [24-28] and achieved the manipulation of the heat flux by predefined diffusion paths. In the experiment we demonstrated a transient thermal cloaking device engineered with thermal metamaterials and successfully hid a centimeter sized strong 'scatter' (thermal disturber), i.e., a vacuum cavity. To facilitate reliable fabrication we adopted the rescaled thermal diffusion equation for various ingredient materials with nearly constant product of the density and heat capacity, and took the anisotropic thermal diffusivities as the key parameters for the design. Our results unambiguously show the practical possibility to implement the complex transformed thermal media with high accuracy and acquire some unprecedented thermodynamic functions, which we believe will help to broaden the current research and pave a new way to manipulate heat for novel device applications., Comment: 19 pages, 4 figures and 1 tables

Metal-dielectric multilayer metamaterials with extreme loss-anisotropy, in which the longitudinal component of the permittivity tensor has ultra-large imaginary part, are proposed and designed. Diffraction-free deep subwavelength beam propagation and manipulation, due to the nearly flat iso-frequency contour (IFC), is demonstrated in such loss-anisotropic metamaterials. It is also shown that deep subwavelength beam propagation can be realized in practical multilayer structures with large multilayer period, when the nonlocal effect is considered., Comment: 10 pages, 3 figures