Search

Double-pipe helical heat exchangers are integral to contemporary mechanical refrigeration equipment. Modification of flow geometry has been widely adopted to enhance heat transfer performance of a heat exchanger. The objective of this study is to numerically investigate heat transfer and entropy generation in a double pipe helical heat exchanger with various cross-sections. A computational model for laminar convective heat transfer was developed and validated against the results from previously published literature. To capture entropy generation, the entropy balance equation for open system is adopted. Effect of inner pipe Dean number, inner pipe and annulus inlet mass flow rate ratio, eccentricity, and flow configuration (co-flow and counter-flow) were examined and discussed in light of computational results. To ensure fair comparison, the considered geometries have same inner pipe cross-section area, same annulus cross-section area, and same outer surface area of inner pipe. The results suggest that square cross-section offers best performance in term of heat transfer, pressure drop and entropy generation. In addition, concentric configuration is more appropriate for low flow rate application while eccentric outer configuration is more suitable for high flow rate application. [ABSTRACT FROM AUTHOR]

Ventilation plays an important role in energy demands of mining industry. Using the immense volume of waste rock as thermal energy storage mass to shave seasonal air temperature oscillations is a genuine and practical solution to save on ventilation energy demands. The extensive size and considerable temperature gradients exhibited in such systems point to the importance of buoyancy-driven natural convection heat transfer mechanism. The present study investigates the effect of natural convection and identifies the order of significance of various heat transfer mechanisms. A Conjugate heat transfer and fluid flow model is proposed which includes both the porous rock mass placed in the rock-pit and the air positioned above it. The results of the model are compared and validated against the existing Non-Conjugate models. Using this novel model, significance of forced convection, driven by ventilation fan, and natural convection, driven by buoyancy, are compared. The model is also used to study how design parameters, such as position of intake air trenches and flow rate of fresh air, will affect energy savings. [ABSTRACT FROM AUTHOR]

Subsurface mining operations are continuously getting deeper and more complex due to depletion of shallow deposits. This fact inevitably brings more expensive, high-tech oriented and most importantly energy intensive subsurface mining operations to come alive. Accordingly, while big mining companies are developing sensible extraction methods to exploit orebodies located at great depths, they are also seeking to cut down their costs and carbon footprint. A large percentage of the energy needed by a subsurface mine is due to the mine ventilation and air conditioning reasons. In fact, for mines deeper than 2 km, mine air conditioning becomes a must. Yet, as there are not many alternatives developed, most of the modern mines are subjected to deploy tens of megawatts worth of cooling plants using massive refrigeration units. This does not only create a large financial burden during the project stage but also results in heavy energy demands during the operation. This paper aims to investigate a natural, alternative deep-mine lake cooling system by providing a detailed 'front-end-loading' design conducted for a real-life, Canadian example. [ABSTRACT FROM AUTHOR]

Remote communities that have limited or no access to the power grid commonly employ diesel generators for communal electricity provision. Nearly 65% of the overall thermal energy input of diesel generators is wasted through exhaust and other mechanical components such as water-jackets, intercoolers, aftercoolers, and friction. If recovered, this waste heat could help address the energy demands of such communities. A viable solution would be to recover this heat and use it for direct heating applications, as conversion to mechanical power comes with significant efficiency losses. Despite a few examples of waste heat recovery from water-jackets during winter, this valuable thermal energy is often discarded into the atmosphere during the summer season. However, seasonal thermal energy storage techniques can mitigate this issue with reliable performance. Storing the recovered heat from diesel generators during low heat demand periods and reusing it when the demand peaks can be a promising alternative. At this point, seasonal thermal storage in shallow geothermal reserves can be an economically feasible method. This paper proposes the novel concept of coupling the heat recovery unit of diesel generators to a borehole seasonal thermal storage system to store discarded heat during summer and provide upgraded heat when required during the winter season on a cold, remote Canadian community. The performance of the proposed ground-coupled thermal storage system is investigated by developing a Computational Fluid Dynamics and Heat Transfer model. [ABSTRACT FROM AUTHOR]