Search

Purpose: The incident electron energy spectrum was determined by an estimation formula based on the Lévy distribution in order to calculate the PDD and OAR that is consistent with the measurement., Methods: EGSnrc was used to calculate PDD and OAR at nominal energies of 4, 6, 9, 12, and 15 MeV. The parameters for determining the incident electron energy spectrum were adjusted to be a reasonable value in the error between the measured and the calculated values., Results: Location and scaling parameters were determined to be 0.5 and 0.001, respectively. The calculated PDD based on the determination formula was in agreement with the measurement within 2 mm/2% at all depths. The OAR also was in agreement with the measurement within 2 mm/2%., Conclusion: In this study, the incident electron energy spectrum was estimated by determining the location and scaling parameters. This method is simpler and more accurate than previously reported, and can be applied to the calculation of dose distributions in Monte Carlo simulations.

We developed organocatalyst systems to promote the cleavage of stable C-H bonds, such as formyl, α-hydroxy, and benzylic C-H bonds, through a hydrogen atom transfer (HAT) process without the use of exogenous photosensitizers. An electronically tuned thiophosphoric acid, 7,7'-OMe-TPA, was assembled with substrate or co-catalyst N -heteroaromatics through hydrogen bonding and π-π interactions to form electron donor-acceptor (EDA) complexes. Photoirradiation of the EDA complex induced stepwise, sequential single-electron transfer (SET) processes to generate a HAT-active thiyl radical. The first SET was from the electron-rich naphthyl group of 7,7'-OMe-TPA to the protonated N -heteroaromatics and the second proton-coupled SET (PCET) from the thiophosphoric acid moiety of 7,7'-OMe-TPA to the resulting naphthyl radical cation. Spectroscopic studies and theoretical calculations characterized the stepwise SET process mediated by short-lived intermediates. This organocatalytic HAT system was applied to four different carbon-hydrogen (C-H) functionalization reactions, hydroxyalkylation and alkylation of N -heteroaromatics, acceptorless dehydrogenation of alcohols, and benzylation of imines, with high functional group tolerance.

Real-time tumor tracking radiotherapy (RTRT) systems typically use fiducial markers implanted near the tumor to track the target using X-ray fluoroscopy. Template pattern matching, used in tracking, is often used to automatically localize the fiducial markers. In radiotherapy of the liver, the thickness of the body that can recognize the fiducial markers must be clinically assessed. The purpose of this study was to quantify the recognition of fiducial markers according to body thickness in stereotactic body radiotherapy of the liver using clinical images obtained using SyncTraX FX4. The recognition scores of fiducial markers were examined in relation to water equivalent length (WEL), tube current, and each flat panel detector. The relationship between the contrast ratio of the fiducial marker and the background and the WEL was also investigated. The average recognition score was found to be less than 20 when the WEL was greater than 25 cm. The probability of successful tracking of image recognition was mostly smaller than 0.8 when the WEL was over 30 cm. The relationship between WEL and tube current did not significantly differ between 100 and 140 mA, but there was a significant difference (p < 0.05) for all other combinations. To ensure tracking of fiducial markers during SBRT, if the WEL representing body thickness is longer than 25 cm, the X-ray fluoroscopy arrangement should be determined based on the WEL., (© 2021. Japan Radiological Society.)

Purpose: Shock wave lithotripsy (SWL) is used to treat upper urinary tract stones. Recently, some volume analyzers have enabled preoperative assessment using three-dimensional computed tomography (3D-CT). We evaluated the efficacy of 3D-CT variables for predicting the outcomes of SWL., Methods: The study population included 193 patients who underwent SWL between November 2014 and August 2020. In addition to conventional two-dimensional computed tomography (2D-CT) assessments, 3D-CT assessments of targeted stones were retrospectively performed, and stone size and stone density (SD) were measured. The successful and unsuccessful treatment groups were compared and risk factors for an unsuccessful first SWL session were investigated. The predictive accuracy of variables measured on 3D-CT was evaluated by receiver operating characteristic curves and multivariate analyses., Results: The success rate of the first SWL session was 73.1%. Stone volume, mean SD and highest SD on 3D-CT were significantly higher in the unsuccessful group than in the successful group. Stone volume showed a higher area under the curve (AUC) than the estimated volumetric stone burden and stone diameter, which were measured on 2D-CT (0.729, 0.683, and 0.672, respectively). The AUCs of the mean SD and highest SD on 3D-CT were higher than those on 2D-CT (0.699, 0.680, 0.617, and 0.627, respectively). Multivariate analyses identified stone volume (≥ 0.29 ml), mean SD on 3D-CT (≥ 421 HU), and absence of hydronephrosis as independent predictive factors for unsuccessful SWL., Conclusion: 3D-CT variables were promising predictors of the outcomes of SWL. Preoperative 3D-CT assessment is helpful for selecting favorable patients for SWL., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

This study aimed to quantitatively clarify the baseline drift for each respiratory cycle in two respiratory-gating methods using the intra-beam respiratory motion data of lung cancer patients. The residual motion and dose distribution were calculated based on intra-beam respiratory motion data with the baseline drift. To quantify the baseline drift $\Delta$ during irradiation, it was defined as the inclination between the detected expiration point and the expiration point in the next cycle in the anterior-posterior (AP), cranial-caudal (CC) and left-right (LR) directions obtained using an in-house programme. The baseline drift value reached up to 0.74 mm/s in the CC direction as per the respiratory motion data of 10 patients. The homogeneity index (HI) of the phase-gating method tended to increase because the target was irradiated even when the amplitude position of the target differed from period to period. In contrast, the amplitude-gating method enabled irradiation considering the amplitude position of the target because the gating window was set considering the amplitude position of the respiratory motion. The respiratory-gating methods and respiratory phase in respiratory-gating lung stereotactic body radiation therapy (SBRT) must be determined based on the respiratory motion of the patients., (© The Author(s) 2021. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

Pv11 is an insect cell line established from the midge Polypedilum vanderplanki, whose larval form exhibits an extreme desiccation tolerance known as anhydrobiosis. Pv11 itself is also capable of anhydrobiosis, which is induced by trehalose treatment. Here we report the successful construction of a genome editing system for Pv11 cells and its application to the identification of signaling pathways involved in anhydrobiosis. Using the Cas9-mediated gene knock-in system, we established Pv11 cells that stably expressed GCaMP3 to monitor intracellular Ca 2+ mobilization. Intriguingly, trehalose treatment evoked a transient increase in cytosolic Ca 2+ concentration, and further experiments revealed that the calmodulin-calcineurin-NFAT pathway contributes to tolerance of trehalose treatment as well as desiccation tolerance, while the calmodulin-calmodulin kinase-CREB pathway conferred only desiccation tolerance on Pv11 cells. Thus, our results show a critical contribution of the trehalose-induced Ca 2+ surge to anhydrobiosis and demonstrate temporally different roles for each signaling pathway., (© 2021. The Author(s).)

Induced pluripotent stem cells (iPSCs) are attractive for use in early drug discovery because they can differentiate into any cell type. Maintenance cultures and differentiation processes for iPSCs, however, require a high level of technical expertise. To overcome this problem, technological developments such as enhanced automation are necessary to replace manual operation. In addition, a robot system with the flexibility and expandability to carry out maintenance culture and each of the required differentiation processes would also be important. In this study, we established a platform to enable the multiple processes required for iPSC experiments using the Maholo LabDroid, which is a humanoid robotic system with excellent reproducibility and flexibility. The accuracy and robustness of Maholo LabDroid enabled us to cultivate undifferentiated iPSCs for 63 days while maintaining their ability to differentiate into the three embryonic germ layers. Maholo LabDroid maintained and harvested iPSCs in six-well plates, then seeded them into 96-well plates, induced differentiation, and implemented immunocytochemistry. As a result, Maholo LabDroid was confirmed to be able to perform the processes required for myogenic differentiation of iPSCs isolated from a patient with muscular disease and achieved a high differentiation rate with a coefficient of variation (CV) <10% in the first trial. Furthermore, the expandability and flexibility of Maholo LabDroid allowed us to experiment with multiple cell lines simultaneously.

Fluidity tests of pure aluminum 1070 and Al-Si alloys with Si contents of up to 25% were conducted using a die cast machine equipped with a spiral die. The effects of the channel gap, die temperature, and injection speed on the fluidity were investigated. When the channel gap was small (0.5 mm), the flow length of the 1070 was minimized, and the fluidity increased monotonically at a gradual rate with increasing Si content. In contrast, larger gaps yielded convex fluidity-Si content curves. Additionally, heating the die had less of an influence on the fluidity of the 1070 than on that of the Al-Si alloy. These results are discussed in the context of the peeling of the solidification layer from the die based on the thicknesses of foils and strips cast by melt spinning and roll casting, respectively. At lower Si contents, heat shrinkage was greater and the latent heat was lower. When the heat shrinkage was greater, the solidification layer began to peel earlier, and the heat transfer between the solidification layer and the die became smaller. As a result, the fluidity of the 1070 was greatest when the channel gap was 0.8 mm.

Temperature corrections are necessary to account for the varying mass of air in the cavity volume of a vented ionization chamber. The temporal response resulting from temperature changes in a cylindrical and/or Farmer-type ionization chamber, which is the standard dosimeter, has been thoroughly discussed by some researchers. The purpose of this study was to characterise and analyse the dependence of the cavity air temperature of the parallel-plate-type ionization chamber on changes in the ambient temperature. Ionization chambers NACP-02 (IBA Dosimetry, GmbH) and Advanced Markus TN34045 (PTW, Freiburg) were modelled using thermal analysis software to present the temperature equilibrium time and the entire ionization chamber temperature distribution. The temporal response of each ionization chamber was measured for comparing the calculation results of the thermal analysis. The ionization chamber cavities of NACP-02 and TN34045 reached complete equilibrium in 670 and 750 s, respectively. Heat transfer occurred faster at the centre of the front wall of TN34045 than at the outside of the centre except for the edges. Further, the non-uniformity of temperature in the cavity was in the range of 24.2-24.8°C for NACP-02 and 23.7-24.4°C for TN34045 at 200 s after the ionization chamber was installed in the water phantom. The previous proposal to wait for about 15 mins after submerging the chamber in a water phantom before the measurement is demonstrated to be appropriate for parallel-plate-type ionization chambers., (© The Author(s) 2021. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

Hydroxyalkylation of N -heteroaromatics with aldehydes was achieved using a binary hybrid catalyst system comprising an acridinium photoredox catalyst and a thiophosphoric acid organocatalyst. The reaction proceeded through the following sequence: (1) photoredox-catalyzed single-electron oxidation of a thiophosphoric acid catalyst to generate a thiyl radical, (2) cleavage of the formyl C-H bond of the aldehyde substrates by a thiyl radical acting as a hydrogen atom transfer catalyst to generate acyl radicals, (3) Minisci-type addition of the resulting acyl radicals to N -heteroaromatics, and (4) a spin-center shift, photoredox-catalyzed single-electron reduction, and protonation to produce secondary alcohol products. This metal-free hybrid catalysis proceeded under mild conditions for a wide range of substrates, including isoquinolines, quinolines, and pyridines as N -heteroaromatics, as well as both aromatic and aliphatic aldehydes, and tolerated various functional groups. The reaction was applicable to late-stage derivatization of drugs and their leads., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

In this study, we propose a methodology for temperature determination of the temperature and pressure correction factor, PTP, by analyzing the temperature distribution of the modeled ionization chamber taking into account the thermal effect of a water phantom on neighboring materials in the process. Additionally, we present an appropriate temperature-equilibrium time for conducting measurements. The temporal response in the cavity is acquired at 20-s intervals using a Farmer ionization chamber and an electrometer. The initial temperature of the water phantom is 20-25°C with continuous heating/cooling. The temporal response is measured until temperature equilibrium is confirmed, specifically when a temperature difference of 1-5°C is observed between the ionization chamber and the water phantom. Using an ionization-chamber model, temperature distribution is simulated between 20 and 25°C with various parameters set to receive heating and cooling from surrounding media. The results suggest that the temporal response of the ionization chamber essentially coincides with the temperature change at the tip and middle; moreover, the predicted temperature change for temporal response and the simulated temperature of water are different by ~0.16°C at the tip and ~0.79°C at the bottom. Overall, the temperature-equilibration time for absorbed dosimetry is affected by two factors: the cavity wall and the stem side of the cavity; moreover, 400 s is required to obtain complete temperature equilibrium in the water phantom. This analytical study supports the experimental value obtained in previous research. Therefore, analytical representation of the temperature distribution in the ionization chamber is possible., (© The Author(s) 2020. Published by Oxford University Press on behalf of The Japanese Radiation Research Society and Japanese Society for Radiation Oncology.)

We developed the first acceptorless dehydrogenation of aliphatic secondary alcohols to ketones under visible light irradiation at room temperature by devising a ternary hybrid catalyst system comprising a photoredox catalyst, a thiophosphate organocatalyst, and a nickel catalyst. The reaction proceeded through three main steps: hydrogen atom transfer from the α-C-H bond of an alcohol substrate to the thiyl radical of the photo-oxidized organocatalyst, interception of the generated carbon-centered radical with a nickel catalyst, and β-hydride elimination. The reaction proceeded in high yield under mild conditions without producing side products (except H 2 gas) from various alcohols, including sterically hindered alcohols, a steroid, and a pharmaceutical derivative. This catalyst system also promoted acceptorless cross-dehydrogenative esterification from aldehydes and alcohols through hemiacetal intermediates.

The aim of this study was to evaluate postoperative changes in sperm chromatin heterogeneity in varicocele patients. In 15 infertile patients with varicocele, sperm parameters including concentration, motility, and morphology were evaluated before and after surgical correction of varicocele. Sperm motion analysis using computer-assisted semen analyzer (CASA) was also performed. To analyze the sperm nuclear proteins, the acridine orange staining method was used. On semen analysis, sperm concentration and motility significantly increased after surgery (p = 0.002, p = 0.003, respectively), although sperm morphology was unaltered postoperatively. CASA parameters, including velocity, linearity, amplitude of lateral head displacement and beat cross frequency were unaltered postoperatively. On the other hand, acridine orange staining significantly increased postoperatively (p = 0.002). Varicocele influences the sperm chromatin condition, as well as sperm concentration and motility. [ABSTRACT FROM AUTHOR]

A Leydig cell line, TTE1, was established from the temperature-sensitive simian virus 40 large T-antigen transgenic mice. The cells showed temperature-sensitive growth characteristics and a differentiated phenotype at a nonpermissive temperature. To identify differentially expressed genes in the process of Leydig cell differentiation, the authors carried out microarray analysis of TTE1 cells cultured at permissive and nonpermissive temperatures. The resulting fluorescence-labeled cDNAs synthesized from mRNAs were hybridized with Clontech's Atlas glass mouse 1.0 microarrays. Of the 1081 genes analyzed, the levels of 31 genes were changed, with 24 genes showing increased levels of expression and the remaining 7 genes showing decreased levels. Tie2 was the most changed transcript, with a 13.5-fold upregulation under the differentiated condition. The authors believe this to be the first report of broadscale gene expression in Leydig cell differentiation using the microarray technology. The ability to analyze broadscale gene expression in this manner provides a powerful tool for investigating the molecular mechanisms of Leydig cell functions. [ABSTRACT FROM AUTHOR]

Dysferlinopathy is a progressive muscle disorder that includes limb-girdle muscular dystrophy type 2B and Miyoshi myopathy (MM). It is caused by mutations in the dysferlin (DYSF) gene, whose function is to reseal the muscular membrane. Treatment with proteasome inhibitor MG-132 has been shown to increase misfolded dysferlin in fibroblasts, allowing them to recover their membrane resealing function. Here, we developed a screening system based on myocytes from MM patient-derived induced pluripotent stem cells. According to the screening, nocodazole was found to effectively increase the level of dysferlin in cells, which, in turn, enhanced membrane resealing following injury by laser irradiation. Moreover, the increase was due to microtubule disorganization and involved autophagy rather than the proteasome degradation pathway. These findings suggest that increasing the amount of misfolded dysferlin using small molecules could represent an effective future clinical treatment for dysferlinopathy. Stem Cells Translational Medicine 2019;8:1017-1029., (© 2019 The Authors. Stem Cells Translational Medicine published by Wiley Periodicals, Inc. on behalf of AlphaMed Press.)

Herein, we investigate the use of agar and gelatin in a polymer gel dosimeter. The polymer gel is enclosed in a vinyl film to obtain a dosimeter of arbitrary shape and maintain the shape at room temperature. The resulting polymer gel dosimeter could preserve its shape across a wide temperature range. Excluding the surface region, the obtained dose distribution was within 3% of that determined in an ionization chamber., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The Gram-negative marine propylene-assimilating bacterium, strain PE-TB08W, was isolated from surface seawater. A structural gene analysis using the 16S rRNA gene showed 96, 94, and 95% similarities to Halioglobus species, Haliea sp. ETY-M, and Haliea sp. ETY-NAG, respectively. A phylogenetic tree analysis showed that strain PE-TB08W belonged to the EG19 (Chromatocurvus)-Congregibacter-Haliea cluster within the Halieaceae (formerly Alteromonadaceae) family. Thus, strain PE-TB08W was characterized as a newly isolated Halieaceae bacterium; we suggest that this strain belongs to a new genus. Other bacterial characteristics were investigated and revealed that strain PE-TB08W assimilated propylene, n-butane, 1-butene, propanol, and 1-butanol (C3 and C4 gaseous hydrocarbons and primary alcohols), but not various other alcohols, including methane, ethane, ethylene, propane, and i-butane. The putative alkene monooxygenase (amo) gene in this strain was a soluble methane monooxygenase-type (sMMO) gene that is ubiquitous in alkene-assimilating bacteria for the initial oxidation of alkenes. In addition, two epoxide carboxylase systems containing epoxyalkane, the co-enzyme M transferase (EaCoMT) gene, and the co-enzyme M biosynthesis gene, were found in the upstream region of the sMMO gene cluster. Both of these genes were similar to those in Xanthobacter autotrophicus Py2 and were inductively expressed by propylene. These results have a significant impact on the genetic relationship between terrestrial and marine alkene-assimilating bacteria.

Standard therapy for gastric diffuse large B-cell lymphoma (DLBCL) is considered to be chemotherapy with or without involved-field radiation therapy. Although R-CHOP therapy alone is widely used for DLBCL with gastric lesions (DLBCL-GL), the outcome and incidence of treatment-related gastric complications following R-CHOP are not well known. This study aimed to evaluate the outcome after R-CHOP therapy in patients with gastric DLBCL including gastric complications and to identify risk factors for the complications. Consecutive patients with newly diagnosed DLBCL-GL treated with R-CHOP between 2003 and 2014 were retrospectively evaluated. DLBCL-GL was defined only when pathologically confirmed in the stomach. Of the 96 patients with DLBCL-GL, 63 patients were diagnosed with gastric symptoms. Eighty-eight patients (92%) completed six to eight cycles of R-CHOP. The complete remission (CR) rate was 86%, and 3-year and 5-year overall survival rates were 80% and 73%, respectively. Patients were well stratified according to the Revised International Prognostic Index (R-IPI). Complication rate was 8% (8/96); seven patients had bleeding and three had stenosis. No patients had gastric perforation. Bleeding occurred during the first cycle of R-CHOP in five patients (5/7, 71%). Patients with gastric complications had a lower R-CHOP completion rate (50%, P = 0.001) and a lower CR rate (25%, P < 0.001) than those without complications. A low serum albumin level at diagnosis was the only risk factor identified for gastric complications (P = 0.001) and six of the eight patients with complications were shown to be at stage IV. Further studies of DLBCL-GL are warranted to identify patients at high risk for gastric complications and to provide better treatment strategies., (© 2019 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.)

Submicrometre spherical particles made of Au and Fe can be fabricated by pulsed-laser melting in liquid (PLML) using a mixture of Au and iron oxide nanoparticles as the raw particles dispersed in ethanol, although the detailed formation mechanism has not yet been clarified. Using a 355 nm pulsed laser to avoid extreme temperature difference between two different raw particles during laser irradiation and an Fe₂O₃ raw nanoparticle colloidal solution as an iron source to promote the aggregation of Au and Fe₂O₃ nanoparticles, we performed intensive characterization of the products and clarified the formation mechanism of Au-Fe composite submicrometre spherical particles. Because of the above two measures (Fe₂O₃ raw nanoparticle and 355 nm pulsed laser), the products-whether the particles are phase-separated or homogeneous alloys-basically follow the phase diagram. In Fe-rich range, the phase-separated Au-core/Fe-shell particles were formed, because quenching induces an earlier solidification of the Fe-rich component as a result of cooling from the surrounding ethanol. If the particle size is small, the quenching rate becomes very rapid and particles were less phase-separated. For high Au contents exceeding 70% in weight, crystalline Au-rich alloys were formed without phase separation. Thus, this aggregation control is required to selectively form homogeneous or phase-separated larger submicrometre-sized particles by PLML., Competing Interests: The authors declare no conflict of interest.

We describe a hybrid system that realizes cooperativity between an organophotoredox acridinium catalyst and a chiral chromium complex catalyst, thereby enabling unprecedented exploitation of unactivated hydrocarbon alkenes as precursors to chiral allylchromium nucleophiles for asymmetric allylation of aldehydes. The reaction proceeds under visible light irradiation at room temperature, affording the corresponding homoallylic alcohols with a diastereomeric ratio >20/1 and up to 99% ee. The addition of Mg(ClO 4 ) 2 markedly enhanced both the reactivity and enantioselectivity.

This year marks the tenth anniversary of the world's first transplantation of tissue generated from induced pluripotent stem cells (iPSCs). There is now a growing number of clinical trials worldwide examining the efficacy and safety of autologous and allogeneic iPSC-derived products for treating various pathologic conditions. As we patiently wait for the results from these and future clinical trials, it is imperative to strategize for the next generation of iPSC-based therapies. This review examines the lessons learned from the development of another advanced cell therapy, chimeric antigen receptor (CAR) T cells, and the possibility of incorporating various new bioengineering technologies in development, from RNA engineering to tissue fabrication, to apply iPSCs not only as a means to achieve personalized medicine but also as designer medical applications., (© 2024 Wiley Periodicals LLC.)

A hybrid catalysis that comprises an acridinium photoredox catalyst, a thiophosphate organocatalyst, and a nickel catalyst-enabled acceptorless dehydrogenation of hydrocarbons is reported. The cationic nickel complex played a critical role in the reactivity. This is the first example of acceptorless dehydrogenation of hydrocarbons by base metal catalysis under mild reaction conditions of visible light irradiation at room temperature.

The aim of this study was to evaluate the correlation of new of Sperm Quality Analyzer (SQA-V) with the computer-assisted sperm analysis (CASA) and manual semen analysis estimates. One hundred five fresh semen samples were analyzed using SQA-V and CASA and manual semen analysis. Significant correlations of sperm concentration (p [ABSTRACT FROM AUTHOR]

Twenty-two idiopathic infertile patients were treated with Oriental herbal medicine, Bu-zhong-yi-qi-tang (Hochu-ekki-to). Seminal plasma sFas level elevated significantly after herb administration. There was an inverse correlation between seminal plasma IL-6 level and sperm concentration before treatment. After the administration of herb seminal plasma, sFas levels significantly correlated with sperm concentration. Seminal plasma IL-8 level did not change. Certain kinds of cytokine in the seminal plasma might play some role in improving semen quality with treatment. [ABSTRACT FROM AUTHOR]

Hematospermia is supposed to be derived from pathological conditions in the seminal vesicle, prostate, testis, epididymis, or urethra. A recent advance in diagnostic procedures has demonstrated the seminal vesicle, the prostate, and midline cyst as potential sources of hematospermia. The authors describe a case of hematospermia caused by ejaculatory duct obstruction, in which a transurethral technique was successful. A 51-year-old male was referred to the authors' clinic with a chief complaint of hematospermia. Transurethral ultrasonography showed a cystic lesion surrounded with hyperechoic area in the middle of the prostate. Vasography demonstrated the distal dilation of the ejaculatory duct. Magnetic resonance imaging demonstrated a high signal intensity area in the middle of the prostate. Urethrocystoscopy showed an enlarged cystic lesion with an orifice at the prostatic urethra, which was incised endoscopically. There was no complication observed postoperatively. Seven months after the technique, hematospermia resolved completely. A midline cyst should be considered a cause of hematospermia and the incidence of such cysts may be higher than that previously recognized. The transurethral technique is expected to be a successful treatment approach. [ABSTRACT FROM AUTHOR]

The seminal plasma levels of soluble Fas (sFas) and interleukins IL-6 and IL-8 were measured and their relationship with semen qualities was examined. The seminal plasma sFas level in fertile males was significantly higher than that in the infertile group. On the other hand, seminal plasma level of IL-6 was significantly lower in fertile males than in the infertile group. In the infertile group, patients with oligozoospermia had a lower seminal plasma sFas and a higher IL-6 level than those with normal sperm concentration. There was an inverse correlation between IL-6 and sperm concentration in infertile patients. Seminal plasma IL-8 was not correlated with sperm parameters. It would appear that certain kinds of cytokine in the seminal plasma might play an important role in improving semen quality. [ABSTRACT FROM AUTHOR]

A Leydig cell line, TTE1, has been established from transgenic mice harboring a temperature-sensitive simian virus 40 (tsSV40) large T-antigen gene. The cells grew at a permissive temperature (33°C), but growth was markedly prevented at a nonpermissive temperature (39°C). T-antigen was expressed in the nuclei at 33°C but disappeared at 39°C, indicating that the cells show a temperature-sensitive growth phenotype reflected by the tsSV40 large T-antigen. TTE1 cells did not show any colony-forming activity in soft agar and form tumors in subcutaneous tissue in nude mice, indicating that the cells were not transformed. Alkaline phosphatase and 3β-hydroxysteroid dehydrogenase (HSD) activities or expression of cytokeratin and vimentin were observed. Reverse transcription-polymerase chain reaction (RT-PCR) analysis indicated that TTE1 cells expressed mRNAs encoding 17β-HSD types 1 and 3, and inhibin-α. The cells with unique characteristics, therefore, should serve as a useful model to study the function of Leydig cell. [ABSTRACT FROM AUTHOR]