Search

This study seeks to explore the correlation between cortical activation and the Infinity Walk pattern, examining how the influence of foot overpronation and footwear may impact motor control. Functional near-infrared spectroscopy (fNIRS), a portable and user-friendly neuroimaging technique, was used to measure hemodynamical changes in six individuals with non-critical pronation degrees. Participants perform the Infinity Walk under various footwear conditions while wearing an fNIRS portable imaging device. Results indicate a consistent hemodynamic pattern in both hemispheres during the Infinity Walk, with no significant differences observed across subjects and footwear conditions in the prefrontal cortex (PFC), pre-motor area, the supplementary motor cortex (PMA & SMC), the primary motor cortex (PMC), and Wernicke’s area (WA). The impact of pronation and footwear on motor control remains inconclusive due to inconsistent hemodynamic patterns. Notably, the activation patterns in Broca’s area (BA) and the temporal gyrus (TG) differ significantly from other brain regions. The balanced hemodynamic responses in the bilateral hemispheres may be attributed to the Infinity Walk’s inherent walking pattern. These findings indicate a need for further investigation into the Infinity Walk to examine the similarities and distinctions in activation patterns within specific brain regions. Additionally, the impact of pronation necessitates more substantial experimental research to establish a correlation between pronation and cortical hemodynamics.

Minimalist walking shoes have been shown to improve foot muscle size and strength in active adults, but not in our previous study involving children, which could relate to the more structured footwear used in our study. Hence, this study examined the effects of true minimalists on intrinsic foot muscle size and strength, foot arch integrity, and physical function among primary school children. After a baseline assessment, 30 primary school students aged between 9 and 12 were given a pair of minimalist shoes (minimalist index = 92%) as their regular school shoes for two school terms, followed by a re-assessment. Seventeen of the 30 participants in the minimalist group completed the study. Compared to the control group, the minimalist group showed significantly increased cross-sectional area of abductor hallucis (p = 0.047, Cohen's d = 0.57) and flexor digitorum brevis (p = 0.037, Cohen's d = 0.80), increased strength of the hallux (p = 0.015, Cohen's d = 0.76) and lesser toes (p = 0.014, Cohen's d = 0.66), greater arch height (p = 0.020, Cohen's d = 0.52) and standing long jump distance (p = 0.001, Cohen's d = 9.79). The control group exhibited improved standing long jump performance only (p = 0.020, Cohen's d = 10.70). Minimalist shoes worn daily to school promote intrinsic foot muscle size and strength, and improve foot arch integrity among primary school students. [ABSTRACT FROM AUTHOR]

An optoelectronic sensor was developed to measure the in-plane displacement between two parallel surfaces. This sensor used a photodetector, which was placed on one of the parallel surfaces, to measure the intensity of the red (R), green (G), blue (B), and white/clear (C) light spectra of a broad-spectrum light that was reflected off a color grid on the opposing surface. The in-plane displacement between these two surfaces caused a change in the reflected RGB and C light intensity, allowing the prediction of the displacement direction and magnitude by using a polynomial regression prediction algorithm to convert the RGB and C light intensity to in-plane displacement. Results from benchtop experiments showed that the sensor can achieve accurate displacement predictions with a coefficient of determination R2 > 0.97, a root mean squared error (RMSE) < 0.3 mm, and a mean absolute error (MAE) < 0.36 mm. By measuring the in-plane displacement between two surfaces, this sensor can be applied to measure the shear of a flexible layer, such as a shoe's insole or the lining of a limb prosthesis. This sensor would allow slippage detection in wearable devices such as orthotics, prostheses, and footwear to quantify the overfitting or underfitting of these devices. [ABSTRACT FROM AUTHOR]

The habitual motion path theory states that exhibiting kinematic differences between running and habitual movement tasks may increase the risk of running-related injury. Staying near one's habitual motion path when running has been shown to reduce compression of the knee joint cartilage, a proxy for decreased soft tissue loading. Previous efforts to quantify one's habitual motion path and deviation when running have utilised just one habitual movement and one time point during the stance phase of running. The methodology advancement described in this manuscript focused on advancing habitual motion path theory research by (1) increasing the number of movements for quantifying an individual's habitual motion path; and (2) utilising the entire stance phase when running to quantify deviations as opposed to one time point. We liken the advancements in the method described in this manuscript as with the first method we were using a ruler to assess one's habitual motion path and deviations, and now we are using calipers; providing a more accurate understanding of an individual's unique habitual movement and deviation when running. We also discuss future potential research avenues related to understanding running biomechanics and footwear effects that this tool will allow us to explore. [ABSTRACT FROM AUTHOR]

Running race courses typically feature numerous turns, an element of a race typically neglected. If a thick midsole were to decrease frontal plane ankle stability, it could potentially lead to a misalignment of lower limb joints, thereby affecting turn running and overall race performance. Therefore, the purpose of this study was to determine the influence of midsole thickness on turn running performance and peak frontal plane ankle angle. Thirteen recreational athletes participated in this study, which examined the effects of two footwear conditions: one with a 35-mm thick midsole and the other with a 50-mm thick midsole. Participants performed ten running trials around each of three turns of radii 3, 6 and 9 m. No significant differences were found between footwear conditions with respect to time to completion (p = 0.028), centre of mass velocity (p = 0.179) or frontal plane ankle angle (p = 0.935) across any of the three turns. These findings would suggest footwear manufactures need not consider the impact of midsole thickness on turn running performance when designing advanced footwear technology (AFT) and consumers need not avoid a substantial stack height when purchasing running shoes. [ABSTRACT FROM AUTHOR]

Footwear has the potential to reduce soft‐tissue vibrations (STV) but responses are highly subject‐specific. Recent evidence shows that compressive garments minimizing STV have a beneficial effect on neuromuscular (NM) fatigue. The aim was to determine whether an individualized midsole hardness can minimize STV and NM fatigue during a half marathon. Twenty experienced runners were recruited for three visits: a familiarization session including the identification of midsole minimizing and maximizing STV amplitude (MIN and MAX, respectively), and two half marathon sessions at 95% of speed at the second ventilatory threshold. STV of the gastrocnemius medialis (GM) muscle, running kinetics, foot strike pattern, rating perceived exhaustion (RPE), and midsole liking were recorded every 3 km. NM fatigue was assessed on plantar flexors (PF) before (PRE) and after (POST) the half marathon. At POST, PF central and peripheral alterations and changes in contact time, step frequency, STV median frequency, and impact force frequency as well as foot strike pattern were found in both MIN and MAX. No significant differences in damping, STV main frequency, flight time, duty factor, and loading rate were observed between conditions whatever the time period. During the half marathon, STV amplitude of GM significantly increased over time for the MAX condition (+13.3%) only. Differences between MIN and MAX were identified for RPE and midsole liking. It could be hypothesized that, while significant, the effect of midsole hardness on STV is too low to substantially affect NM fatigue. [ABSTRACT FROM AUTHOR]

Goal of this work is a quantitative description of Jacquelin Perry's rocker concept by locating the position of the heel rocker and the forefoot rocker within segments of the foot via functional calibration. Two functional calibration tasks with the foot in ground contact were performed by ten typical developed adults and foot marker motion was captured. After applying a least-square method for constructing foot segments, their motion relative to the floor was analyzed via a functional algorithm. Resulting reference positions – namely the heel rotation center and the metatarsal rotation axis – were calculated. Further, the repeatability of the method and variability of outcome within the cohort was tested. The heel rotation center is located substantially posterior (25 mm) and slightly more inferior (5 mm). to the midpoint of the two markers placed medially and laterally on the calcaneus. Repeated measures reveal a variation of this location around 5 mm. The forefoot center is slightly more medial to the "toe marker" (DMT2) and substantially more inferior (19 mm). The metatarsal rotation axis is slightly tilted in the frontal and transverse plane against the metatarsal line given between markers on MT1 and MT5 with small variation in repeated measures (1–2°). The determination of heel rotation center and the metatarsal rotation axis relative to foot segments can be determined with good repeatability and their location meet the intuitive expectation. Since they have a direct biomechanical meaning in the foot roll-over process in gait, they may be used for a more functionally oriented definition of foot segments potentially improving the calculation of foot kinematics and kinetics in future work. • Foot calibration tasks with ground contact were performed by 10 adults. • These were applied to calculate heel rotation center and metatarsal axis. • Results are repeatable with low variation within the cohort (5 mm;5°). • Heel rotation center and metatarsal axis may be used for foot modeling. [ABSTRACT FROM AUTHOR]

Hallux valgus is a common condition where the subluxation of the first metatarsophalangeal joint and lateral deviation of the hallux at the interphalangeal joint creates difficulty with footwear fit. Footwear and foot orthoses are commonly prescribed nonsurgical treatments for hallux valgus. Do extra-width footwear and foot orthoses influence peak pressure at the medial aspect of the metatarsophalangeal and interphalangeal joints in women with hallux valgus? Community-dwelling women with symptomatic hallux valgus underwent gait testing when wearing their own shoes and when wearing extra-width footwear fitted with three-quarter length, arch-contouring prefabricated foot orthoses. Peak pressure (kPa) on the medial aspect of the metatarsophalangeal and medial interphalangeal joints and on the plantar surface of the foot (hallux, lesser toes, metatarsophalangeal joint 1, metatarsophalangeal joints 2–5, midfoot and heel) were measured using the novel pedar®-X system with the pedar® pad and pedar® insole, respectively (Novel, GmbH, Munich, Germany). Paired samples t -tests were used to calculate the differences between the two conditions, and the magnitude of observed differences was calculated using Cohen's d. We tested 28 participants (aged 44–80 years, mean 60.7, standard deviation 10.7). Compared to their own footwear, wearing the intervention footwear and orthoses was associated with a statistically significant decrease in pressure on the medial aspect of the metatarsophalangeal joint (58.3 ± 32.8 versus 42.6 ± 32.8, p =0.026, d =0.49), increased pressure under the midfoot (70.7 ± 25.7 versus 78.7 ± 23.6, p =0.029, d =0.33) and decreased pressure underneath the heel (137.3 ± 39.0 versus 121.3 ± 34.8, p =0.019, d =0.45). The intervention footwear and orthoses significantly decreased peak pressure on the medial aspect of the first metatarsophalangeal joint but had no significant effect on the interphalangeal joint. Further studies are required to determine whether these changes are associated with improvements in symptoms associated with hallux valgus. • We investigated peak medial and plantar pressure in women with hallux valgus. • The intervention decreased medial pressure at the first metarsophalangeal joint. • The intervention increased midfoot and decreased heel plantar pressure. • Women with hallux valgus may benefit from extra-width footwear and orthoses. [ABSTRACT FROM AUTHOR]

Background: Little is known about factors that influence footwear selection by field hockey players. Methods: An online survey was used to collect data on participant demographics and physical characteristics, factors influencing footwear selection, perceptions regarding footwear design features on injury and performance, and experiences regarding usability. Nominal and ordinal data were described as absolute frequencies and relative frequencies. Free text responses were analysed using content analysis. Sex‐related differences in quantitative and qualitative data were explored. Results: A total of 401 hockey players completed the survey. Participants reported that fit, comfort, support, and cushioning were the most important factors when selecting hockey footwear. Most hockey players believed that stud design could influence athletic performance (65%) and injury risk (63%) but reported having no preference on outsole design or stud shape. Most participants (63%) used hockey‐specific footwear, but 46% of female hockey players did not, with 40% using trail running footwear instead. Qualitative analysis revealed that hockey players, particularly female participants, encounter difficulties finding properly fitting footwear. They desire more options for wide or narrow feet and face challenges in accessing suitable hockey shoes due to limited choices and availability. Conclusions: With over a third of field hockey players not using hockey‐specific footwear, future research should attempt to understand the reasons and assess the impact of different footwear features on comfort, performance, injury risk, and usability. [ABSTRACT FROM AUTHOR]

Background: Falls are a global concern affecting people of all ages; however, older adults are particularly vulnerable to age-related factors and foot-related issues. Footwear is critical for preventing falls, as it provides stability and protection against slips, trips, and falls (STFs). However, a significant gap exists in the systematic exploration of the safety aspects of footwear design for fall prevention in older adults. Methods: This comprehensive review applied a meticulous search strategy encompassing prominent databases, including Google Scholar, ScienceDirect, SCOPUS, MEDLINE, ResearchGate, and PubMed. This review synthesized and analyzed existing research to bridge knowledge gaps and provide insights into optimal footwear choices for older adults in terms of design features such as fit, fixation, heel height, collar height, slip resistance, and sole/ insole hardness. Results: The results underscore the importance of specific design features for preventing falls among older adults. A proper fit, secure fixation, appropriate heel and collar heights, slip resistance, and sole/insole hardness significantly contributed to fall prevention. These findings offer valuable guidance for optimizing footwear designs to enhance comfort, stability, and safety in the daily lives of older individuals. Conclusion: This comprehensive review fills a critical knowledge gap regarding the safety of footwear designs for fall prevention in older adults. The identified design features play a vital role in reducing the risk of falls and offer practical recommendations for the development of safer footwear. Ultimately, this study contributes to the existing knowledge base and supports efforts to prevent STFs in older adults through improved footwear design. [ABSTRACT FROM AUTHOR]

Introduction: Several footwear characteristics have been shown to affect balance and gait patterns and may therefore influence the risk of falling in older adults. However, attributing a link between footwear and falls is inherently difficult as it often relies on self-report which may be inaccurate. Methods: Archival video recordings of falls that occurred in two long-term residential aged care facilities were initially screened to determine whether the footwear worn at the time (barefoot, socks, slippers/sandals, or shoes) could be documented. These falls were then independently evaluated by three additional assessors and a meeting was held to obtain consensus in relation to whether the footwear could have potentially contributed to the fall, and what mechanism may have been responsible. Cross-tabulations were performed in relation to footwear type and fall characteristics (proposed mechanism and fall direction). Results: There were 300 falls experienced by 118 older adults aged 58 years–98 years (mean age 82.8 years, SD 7.6). Of these falls, footwear could be ascertained in 224 (75%). After the consensus meeting, the proportion of falls considered to be potentially related to footwear was 40 (18%). The likelihood of footwear contributing to the fall was highest when participants were wearing socks (14/19 falls; 74% of all footwear-related falls), followed by being barefoot (2/6 falls; 33%), wearing slippers/sandals (17/100 falls; 17%), and wearing shoes (7/99 falls, 7%). Conclusion: Footwear could be a potential contributor to a substantial number of falls in residential aged care. Wearing socks would appear to place an older person at risk of future falls and should therefore be avoided in this population. [ABSTRACT FROM AUTHOR]

Ethylene vinyl acetate (EVA) foam is widely used as midsole material in athletic footwear due to its lightweight and cushioning properties. However, EVA foam suffers from low mechanical strength, abrasion resistance, and fatigue resistance. Reinforcing EVA foam with graphene nanoplatelets is a promising approach to improving its mechanical performance for footwear applications. This study investigated the effect of 0.1–1 wt% graphene nanoplatelets on the properties of EVA foam composites relevant to midsole performance. The results showed that 0.1–0.2 wt% graphene provided optimal reinforcement, exhibiting 33–40% higher impact energy absorption, 50–60% lower compressive stiffness, 30% higher flexural stiffness, and up to 40% lower abrasion volume loss. Under simulated use conditions, the composites demonstrated higher energy return and fatigue resistance. The graphene nanoplatelets acted as effective reinforcements within the EVA foam by improving stress transfer, inhibiting crack propagation, and shielding the foam surface. The findings indicate that reinforcing EVA foam with small amounts of graphene nanoplatelets can develop midsole materials with enhanced mechanical performance for athletic footwear. [ABSTRACT FROM AUTHOR]

This research critically evaluates Lululemon Australia's Integrated Marketing Communications (IMC) strategy, specifically focusing on its footwear category. Despite Lululemon's established success in yoga wear, the footwear segment lacks a cohesive IMC approach, evident from its absence in promotional efforts and launch initiatives. The analysis draws on the framework, emphasizing the importance of consistent messaging and comprehensive audience coverage. It highlights discrepancies in targeting and communication alignment, noting a predominant female-centric focus contrary to the intended unisex audience. Overall, the assessment underscores the necessity for Lululemon AU to strengthen its IMC strategy for footwear to effectively resonate with and engage its diverse target demographic. [ABSTRACT FROM AUTHOR]

The influence of 3D printing parameters on compressive properties is an important factor in the application of additive manufacturing processes for products subjected to compressive loads in use. In this study, the compressive strength and compressive modulus of acrylonitrile/butadiene/styrene (ABS) test specimens fabricated using the fused deposition modeling (FDM) process were investigated with the aim of producing products of high-heeled shoes for women. The experimental part of the study includes a central composite experimental design to optimize the main 3D printing parameters (layer thickness, infill density, and extrusion temperature) and the infill geometry (honeycomb and linear at a 45° angle—L45) to achieve maximum printing properties of the 3D-printed products. The results show that the infill density has the greatest influence on the printing properties, followed by the layer thickness and, finally, the extrusion temperature as the least influential factor. The linear infill at a 45° angle resulted in higher compressive strength and lower compressive modulus values compared to the honeycomb infill. By optimizing the results, the maximum compressive strength (that of L45 is 41 N/mm2 and that of honeycomb 35 N/mm2) and modulus (that of L45 is 918 N/mm2 and that of honeycomb is 868 N/mm2) for both types of infill is obtained at a layer thickness of 0.1 mm and infill density of 40%, while the temperature for L45 can be in the range of 209 °C to 254 °C, but for the honeycomb infill, the processing temperature is 255 °C. Additionally, the study highlights the potential for sustainable manufacturing practices and the integration of advanced 3D printing technologies to enhance the efficiency and eco-friendliness of the production process. [ABSTRACT FROM AUTHOR]

Integration of the environment into business is now a reality that requires structural changes. This includes adopting eco-innovations in products, production processes, and business management to achieve competitive survival. Previous studies suggest that eco-innovation is driven by external pressures from legislators, stakeholders, technology, markets, and rivals. However, the literature lacks information on the internal mechanisms that drive and transform external pressures into eco-innovations. This research aims to discuss the mediating role of environmental strategy in the relationship between external pressures and eco-innovation. Based on data from 102 Spanish footwear companies, the study proposes a model of structural equations. The results indicate that proactive environmental strategy is the internal mechanism required to integrate profitable eco-innovation into the firm in response to environmental pressures. This finding highlights the importance of taking a holistic perspective and integrating environmental considerations into business management, and these findings have implications for managers and policy makers. [ABSTRACT FROM AUTHOR]

In this study, we aimed to compare and contrast the intralimb coordinative patterns of habitual forefoot strikers (FFS) and rearfoot strikers (RFS) during steady‐state running across three different shoe types: minimalist, neutral and cushioned shoes. To describe these coordinative patterns, we implemented the concept of the 'preferred movement path' which represents the movement path that runners naturally select in response to their physical capacity and external environment. We quantified cycle‐to‐cycle consistency (ACC) and within‐trial variance in coordination patterns (SoV) using joint angle data from the ankle and knee for ankle‐knee coupling and from the knee and hip for knee‐hip coupling. Additionally, we calculated the measure of shape difference in joint coupling as the sum of squared distances (SSD) between/within conditions and groups. The percentage of runners who displayed shape differences below certain SSD thresholds was also evaluated. Our findings revealed no significant group or shoe type effect on any of the variability measures (ACC: p = 0.460 for ankle‐knee and p = 0.832 for knee‐hip; SoV: p = 0.345 for ankle‐knee and p = 0.755 for knee‐hip). However, there was a significant (p < 0.001) shape difference observed between the most extreme shoe conditions. Despite this, when runners switched shoes, 70%–90% of them maintained their original coordinative pattern across both joint couplings, indicating a strong adherence to their preferred movement path. This suggests that while shoe type can influence the shape of the coordinative pattern, the inherent movement tendencies of the runners remain largely consistent. Highlights: The study found no differences in the cyclogram variability between habitual foot strike classification groups when wearing different shoes.The largest number of different movement responses was present at the ankle‐knee coupling.A significantly greater proportion of participants changed their ankle‐knee and knee‐hip coordinative patterns between the High versus Low Minimal Index (MI) conditions compared to the other shoe comparisons.No differences were found between the groups in terms of cyclogram variability. [ABSTRACT FROM AUTHOR]

Objective: this article aims to analyze how footwear companies can innovate frugally in convergence with the principles of sustainability. This objective was achieved based on studies that observe the relationship between sustainability and frugal innovation, with an emphasis on bricolage strategies, from a perspective of applicability in the footwear industry, as it is a sector with high environmental impact. Method: the research uses design science research, and made use of a field diary, for greater depth of understanding of the footwear environment, as well as secondary analysis of documents on the internet and transcribed interviews with the seven experts. Results: the study managed to propose two action artifacts, one of them a frugal and sustainable sneaker artifact, and, as a second action artifact, it realized the need for collaborative and constant action between universities and companies in the search for frugal and sustainable solutions, which can benefit both companies, through profitable results, and the university, through longitudinal research and production of articles. Conclusions: the footwear industry yearns for low-cost (frugal) innovations that are at the same time sustainable, and demonstrates capacity and interest in meeting social and political demands for sustainable actions; in order to achieve this, greater proximity to the university presents itself as a collaboration that can produce benefits for both, with side effects of positive impact on environmental initiatives, society, and government policies. [ABSTRACT FROM AUTHOR]

BACKGROUND: Shoes upper has been shown to affect the shoe microclimate (temperature and humidity). However, the existing data on the correlation between the microclimate inside footwear and the body's physical factors is still quite limited. OBJECTIVE: This study examined whether shoes air permeability would influence foot microclimate and spatial characteristics of lower limb and body. METHODS: Twelve recreational male habitual runners were instructed to finish an 80 min experimental protocol, wearing two running shoes with different air permeability. RESULTS: Participants wearing CLOSED upper structure shoe exhibited higher in-shoe temperature and relative humidity. Although there was no significant difference, shank temperature and metabolism in OPEN upper structure shoes were lower. CONCLUSIONS: This indicates that the air permeability of shoes can modify the microclimate of the feet, potentially affecting the lower limb temperature. This study provides relevant information for the design and evaluation of footwear. [ABSTRACT FROM AUTHOR]

• Comparison of foot insole impressions using the Reel measurement methodology. • Measurements to the first and fourth toes were least variable. • Measurements from the heel to the third and fifth toes were most variable. • Foot insole impressions were assessed by experienced and inexperienced analysts. • The measurements of experienced analysts were more precise. In forensic podiatry, footprints have been shown to provide a valuable source of discriminatory information. Footprints may be found in various forms, such as bare footprints, sock-clad footprints, or as impressions on insoles within footwear. This study utilized quantitative measures of foot impressions on pairs of insoles from shoes worn by the same person from a population of 31 adults. The measurements were determined by using the Reel method and comprised measurements from the heel to the tips of the toes and width of the ball. The purpose of the study was to assess the margin of error for these measurements to determine whether they were sufficiently accurate for forensic use. A secondary purpose of this study was to determine whether the analyst's experience or lack thereof in forensic podiatry had an impact on the precision of measurement data. The insole foot impressions were assessed by two podiatrists with forensic podiatry experience in footprint analysis, footprint research, and in using the Reel method of footprint measurement, as well as by three students of podiatric medicine without any such experience. A statistical analysis of the data from the study was performed using SPSS v28 (IBM SPSS Statistics for Windows, Version 28.0. Armonk, NY: IBM Corp). The most reliable measurements were of forefoot width, heel to first toe, heel to second toe, and heel to fourth toe. The greatest variation occurred in the measurements of the heel to the third and fifth toes. The measurements of the forensic podiatrist analysts showed less variability than those of the podiatry students, suggesting that measurement precision is related to the experience of the analyst. [ABSTRACT FROM AUTHOR]

Background: Adequate compliance with wearing therapeutic footwear (TF) to prevent diabetic foot ulcers is known to be low. The primary aim of this study was to identify population awareness about the ulceration and/or recurrence risk according to footwear choice. The secondary aim was to evaluate the compliance level in footwear choice based on a patient's own risk. Methods: Forty podiatrists participated from 1 September 2017 to 31 August 2018, providing six-section forms which included personal data, risk classification, footwear characteristics and a knowledge questionnaire. Results: This study included 1507 patients. Those with active ulcers were excluded. A total of 43% of patients belonged to risk class 0, 19% to risk class 1, 19% to risk class 2 and 19% to risk class 3. A total of 58% had foot deformities. Conclusions: Nearly half of patients with a high risk of ulceration had knowledge of their own risk but the majority of them did not follow the recommendations. Only a small percentage (36%) of risk class 3 patients wore footwear suitable for their risk class. There was poor consideration of footwear choice among patients. We highlight critical issues in patient education and compliance with wearing footwear appropriate to their risk class. [ABSTRACT FROM AUTHOR]

It is a significant challenge to address the complex issue of comparing multiple products with the same function but distinct characteristics in the circular economy framework and its implications for Life Cycle Assessment (LCA) in the footwear sector. Our strategy involved developing a specific methodology for determining the durability characteristic of physical products, which was accomplished by combining the results of various physical tests. In particular, a set of urban soles was examined for the case study. The environmental footprints of the footwear were then normalised using this durability metric, aligning them with the number of units required to reach practical quality levels. Using this method, we achieved substantial changes in the results of the LCA analysis, particularly in the context of products whose design prioritised particular qualities like durability. As a result, this research emphasises the necessity of redefining the functional unit, particularly from the circular economy perspective, and illustrates how it may positively impact company eco-design policies. [ABSTRACT FROM AUTHOR]

The objective of this study is to develop an improved shoe insole that enhances heat and moisture transmission (thermo-physiological comfort) qualities, as well as its mechanical characteristics, through the utilization of weft knitting spacer fabric. Two samples were prepared. One sample was comprised of Tri-Blend knitted fabric layers, while the other sample was made using cotton knitted fabrics in both layers. These layers, in both samples, were connected by spacer yarns of monofilament nylon. Tri-blend fabric was made from Bamboo (80%), flax (15%), and polypropylene (5%). Monofilament nylon was used in spacer layer. Thermo-physiological comfort testing i.e., air permeability, moisture management and thermal resistance test were performed for all the samples. The investigation also established the correlation between the mechanical properties, such as puncture resistance and tactile comfort, of footwear materials and their interaction with the human body. The prepared samples of shoe insole were also compared with the commercially available insoles made from synthetic materials. The outcome of the study suggests that the natural fiber spacer fabric can be used as an alternative to rubber. In conclusion, the results of this study offer valuable insights for product developers seeking sustainable alternatives that can meet consumer demands for both wearability and comfort. [ABSTRACT FROM AUTHOR]

The article shows the main problems of product quality management in a multidimensional organizational structure of industrial cooperation, organizational and production risks. It analyses the prerequisites and factors, the effectiveness of developed solutions to improve the quality management systems of the expanding competitive range of leather and footwear products. The article presents a system-situational model of quality management. The conditions for adapting the method of sequential dynamic quality assessment are formulated in order to improve the quality of production of leather and footwear products. [ABSTRACT FROM AUTHOR]