Search

Axion-like particles are a broad class of dark matter candidates which are expected to behave as a coherent, classical field with a weak coupling to photons. Research into the detectability of these particles with laser interferometers has recently revealed a number of promising experimental designs. Inspired by these ideas, we propose the Axion Detection with Birefringent Cavities (ADBC) experiment, a new axion interferometry concept using a cavity that exhibits birefringence between its two, linearly polarized laser eigenmodes. This experimental concept overcomes several limitations of the designs currently in the literature, and can be practically realized in the form of a simple bowtie cavity with tunable mirror angles. Our design thereby increases the sensitivity to the axion-photon coupling over a wide range of axion masses., Comment: 5 pages, 3 figures; v2: further clarification and references, matches version accepted by PRD

In the coming years gravitational-wave detectors will undergo a series of improvements, with an increase in their detection rate by about an order of magnitude. Routine detections of gravitational-wave signals promote novel astrophysical and fundamental theory studies, while simultaneously leading to an increase in the number of detections temporally overlapping with instrumentally- or environmentally-induced transients in the detectors (glitches), often of unknown origin. Indeed, this was the case for the very first detection by the LIGO and Virgo detectors of a gravitational-wave signal consistent with a binary neutron star coalescence, GW170817. A loud glitch in the LIGO-Livingston detector, about one second before the merger, hampered coincident detection (which was initially achieved solely with LIGO-Hanford data). Moreover, accurate source characterization depends on specific assumptions about the behavior of the detector noise that are rendered invalid by the presence of glitches. In this paper, we present the various techniques employed for the initial mitigation of the glitch to perform source characterization of GW170817 and study advantages and disadvantages of each mitigation method. We show that, despite the presence of instrumental noise transients louder than the one affecting GW170817, we are still able to produce unbiased measurements of the intrinsic parameters from simulated injections with properties similar to GW170817., Comment: 11 pages, 3 figures, accepted in PRD

We derive a quantum limit to the sensitivity of laser interferometric gravitational-wave detectors from optical-loss-induced dissipation, analogous to the sensitivity limit from the mechanical dissipation. It applies universally to different interferometer configurations, and cannot be surpassed unless the optical property is improved. This result provides an answer to the long-standing question of how far we can push the detector sensitivity given the state-of-the-art optics., Comment: 6 pages, 3 figures

We propose an upgrade to Advanced LIGO (aLIGO), named LIGO-LF, that focuses on improving the sensitivity in the 5-30 Hz low-frequency band, and we explore the upgrade's astrophysical applications. We present a comprehensive study of the detector's technical noises and show that with technologies currently under development, such as interferometrically sensed seismometers and balanced-homodyne readout, LIGO-LF can reach the fundamental limits set by quantum and thermal noises down to 5 Hz. These technologies are also directly applicable to the future generation of detectors. We go on to consider this upgrade's implications for the astrophysical output of an aLIGO-like detector. A single LIGO-LF can detect mergers of stellar-mass black holes (BHs) out to a redshift of z~6 and would be sensitive to intermediate-mass black holes up to 2000 M_\odot. The detection rate of merging BHs will increase by a factor of 18 compared to aLIGO. Additionally, for a given source the chirp mass and total mass can be constrained 2 times better than aLIGO and the effective spin 3-5 times better than aLIGO. Furthermore, LIGO-LF enables the localization of coalescing binary neutron stars with an uncertainty solid angle 10 times smaller than that of aLIGO at 30 Hz, and 4 times smaller when the entire signal is used. LIGO-LF also significantly enhances the probability of detecting other astrophysical phenomena including the tidal excitation of neutron star r-modes and the gravitational memory effects., Comment: 5 pages, 6 figures, published in PRL

We present quantities which characterize the sensitivity of gravitational-wave observatories to sources at cosmological distances. In particular, we introduce and generalize the horizon, range, response, and reach distances. These quantities incorporate a number of important effects, including cosmologically well-defined distances and volumes, cosmological redshift, cosmological time dilation, and rate density evolution. In addition, these quantities incorporate unique aspects of gravitational wave detectors, such as the variable sky sensitivity of the detectors and the scaling of the sensitivity with inverse distance. An online calculator (https://users.rcc.uchicago.edu/~dholz/gwc/) and python notebook (https://github.com/hsinyuc/distancetool) to determine GW distances are available. We provide answers to the question: "How far can gravitational-wave detectors hear?", Comment: Classical and Quantum Gravity accepted version

Interferometric gravitational wave detectors are dynamic instruments. Changing gravitational-wave strains influence the trajectories of null geodesics and therefore modify the interferometric response. These effects will be important when the associated frequencies are comparable to the round-trip light travel time down the detector arms. The arms of advanced detectors currently in operation are short enough that the strain can be approximated as static, but planned 3$^\mathrm{rd}$ generation detectors, with arms an order of magnitude longer, will need to account for these effects. We investigate the impact of neglecting the frequency-dependent detector response for compact binary coalescences and show that it can introduce large systematic biases in localization, larger than the statistical uncertainty for 1.4-1.4$M_\odot$ neutron star coalescences at $z\lesssim1.7$. Analysis of $3^\mathrm{rd}$ generation detectors therefore must account for these effects., Comment: 6 pages, 5 figures

It has been suggested that the next generation of interferometric gravitational wave detectors may observe spontaneously excited parametric oscillatory instabilities. We present a method of actively suppressing any such instability through application of electrostatic forces to the interferometers' test masses. Using numerical methods we quantify the actuation force required to damp candidate instabilities and find that such forces are readily achievable. Our predictions are subsequently verified experimentally using prototype Advanced LIGO hardware, conclusively demonstrating the effectiveness of our approach.

Squeezed states of light have been successfully employed in interferometric gravitational-wave detectors to reduce quantum noise, thus becoming one of the most promising options for extending the astrophysical reach of the generation of detectors currently under construction worldwide. In these advanced instruments, quantum noise will limit sensitivity over the entire detection band. Therefore, to obtain the greatest benefit from squeezing, the injected squeezed state must be filtered using a long-storage-time optical resonator, or "filter cavity", so as to realise a frequency dependent rotation of the squeezed quadrature. Whilst the ultimate performance of a filter cavity is determined by its storage time, several practical decoherence and degradation mechanisms limit the experimentally achievable quantum noise reduction. In this paper we develop an analytical model to explore these mechanisms in detail. As an example, we apply our results to the 16 m filter cavity design currently under consideration for the Advanced LIGO interferometers.

The Standard Quantum Limit in continuous monitoring of a system is given by the trade-off of shot noise and back-action noise. In gravitational-wave detectors, such as Advanced LIGO, both contributions can simultaneously be squeezed in a broad frequency band by injecting a spectrum of squeezed vacuum states with a frequency-dependent squeeze angle. This approach requires setting up an additional long base-line, low-loss filter cavity in a vacuum system at the detector's site. Here, we show that the need for such a filter cavity can be eliminated, by exploiting EPR-entangled signal and idler beams. By harnessing their mutual quantum correlations and the difference in the way each beam propagates in the interferometer, we can engineer the input signal beam to have the appropriate frequency dependent conditional squeezing once the out-going idler beam is detected. Our proposal is appropriate for all future gravitational-wave detectors for achieving sensitivities beyond the Standard Quantum Limit., Comment: 16 pages, 7 figures

Interferometric gravitational wave detectors operate with high optical power in their arms in order to achieve high shot-noise limited strain sensitivity. A significant limitation to increasing the optical power is the phenomenon of three-mode parametric instabilities, in which the laser field in the arm cavities is scattered into higher order optical modes by acoustic modes of the cavity mirrors. The optical modes can further drive the acoustic modes via radiation pressure, potentially producing an exponential buildup. One proposed technique to stabilize parametric instability is active damping of acoustic modes. We report here the first demonstration of damping a parametrically unstable mode using active feedback forces on the cavity mirror. A 15,538 Hz mode that grew exponentially with a time constant of 182 sec was damped using electro-static actuation, with a resulting decay time constant of 23 sec. An average control force of 0.03 nNrms was required to maintain the acoustic mode at its minimum amplitude., Comment: 6 pages, 5 figures

The two binary black-hole (BBH) coalescences detected by LIGO, GW150914 and GW151226, were relatively nearby sources, with a redshift of ~0.1. As the sensitivity of Advanced LIGO and Virgo increases in the next few years, they will eventually detect stellar-mass BBHs up to redshifts of ~1. However, these are still relatively small distances compared with the size of the Universe, or with those encountered in most areas of astrophysics. In order to study BBH during the epoch of reionization, or black holes born from population III stars, more sensitive instruments are needed. Third-generation gravitational-wave detectors, such as the Einstein Telescope or the Cosmic Explorer are already in an advanced R&D stage. These detectors will be roughly a factor of 10 more sensitive in strain than the current generation, and be able to detect BBH mergers beyond a redshift of 20. In this paper we quantify the precision with which these new facilities will be able to estimate the parameters of stellar-mass, heavy, and intermediate-mass BBH as a function of their redshifts and the number of detectors. We show that having only two detectors would result in relatively poor estimates of black hole intrinsic masses; a situation improved with three or four instruments. Larger improvements are visible for the sky localization, although it is not yet clear whether BBHs are luminous in the electromagnetic or neutrino band. The measurement of the spin parameters, on the other hand, do not improve significantly as more detectors are added to the network since redshift information are not required to measure spin., Comment: 12 Pages, 8 Figure. Version accepted by PRD

Bovine tuberculosis (TB) poses a serious threat for agricultural industry in several countries, it involves potential interactions between wildlife and cattle and creates societal problems in terms of human-wildlife conflict. This study addresses connectedness network analysis, the spatial, and temporal dynamics of TB between cattle in farms and the European badger (Meles meles) using a large dataset generated by a calibrated agent based model. Results showed that infected network connectedness was lower in badgers than in cattle. The contribution of an infected individual to the mean distance of disease spread over time was considerably lower for badger than cattle; badgers mainly spread the disease locally while cattle infected both locally and across longer distances. The majority of badger-induced infections occurred when individual badgers leave their home sett, and this was positively correlated with badger population growth rates. Point pattern analysis indicated aggregation in the spatial pattern of TB prevalence in badger setts across all scales. The spatial distribution of farms that were not TB free was aggregated at different scales than the spatial distribution of infected badgers and became random at larger scales. The spatial cross correlation between infected badger setts and infected farms revealed that generally infected setts and farms do not coexist except at few scales. Temporal autocorrelation detected a two year infection cycle for badgers, while there was both within the year and longer cycles for infected cattle. Temporal cross correlation indicated that infection cycles in badgers and cattle are negatively correlated. The implications of these results for understanding the dynamics of the disease are discussed., Comment: to appear in the journal Stochastic Environmental Research & Risk Assessment

Bovine tuberculosis (TB) is a chronic disease in cattle that causes a serious food security challenge to the agricultural industry in terms of dairy and meat production. In GB, Scotland has had a risk based surveillance testing policy under which high risk herds are tested frequently, and in Sept 2009 was officially declared as TB free. Wales have had an annual or more frequent testing policy for all cattle herds since Jan 2010, while in England several herds are still tested every 4 years except some high TB prevalence areas where annual testing is applied. Time series analysis using publicly available data for total tests on herds, total cattle slaughtered, new herd incidents, and herds not TB free, were analysed globally for GB and locally for the constituent regions of Wales, Scotland, West, North, and East England. After detecting trends over time, underlying regional differences were compared with the testing policies in the region. Total cattle slaughtered are decreasing in Wales, Scotland and West England, but increasing in the North and East English regions. New herd incidents, i.e., disease incidence, are decreasing in Wales, Scotland, West English region, but increasing in North and East English regions. Herds not TB free, are increasing in West, North, and East English regions, while they are decreasing in Wales and Scotland. Total cattle slaughtered were positively correlated with total tests in the West, North, and East English regions, with high slopes of regression. There was no correlation between total cattle slaughtered and total tests on herds in Wales indicating that herds are tested frequent enough in order to detect all likely cases and so control TB. The main conclusion of the analysis conducted here is that more frequent testing is leading to lower TB infections in cattle both in terms of TB prevalence as well as TB incidence., Comment: (in press) Stochastic Environmental Research and Risk Assessment (2015)