Search

Context. Apertif is a multi-beam receiver system for the Westerbork Synthesis Radio Telescope that operates at 1.1-1.5 GHz, which overlaps with various radio services, resulting in contamination of astronomical signals with radio-frequency interference (RFI). Aims. We analyze approaches to mitigate Apertif interference and design an automated detection procedure for its imaging mode. Using this approach, we present long-term RFI detection results of over 300 Apertif observations. Methods. Our approach is based on the AOFlagger detection approach. We introduce several new features, including ways to deal with ranges of invalid data (e.g. caused by shadowing) in both the SumThreshold and scale-invariant rank operator steps; pre-calibration bandpass calibration; auto-correlation flagging; and HI flagging avoidance. These methods are implemented in a new framework that uses the Lua language for scripting, which is new in AOFlagger version 3. Results. Our approach removes RFI fully automatically, and is robust and effective enough for further calibration and (continuum) imaging of these data. Analysis of 304 observations show an average of 11.1% of lost data due to RFI with a large spread. We observe 14.6% RFI in auto-correlations. Computationally, AOFlagger achieves a throughput of 370 MB/s on a single computing node. Compared to published machine learning results, the method is one to two orders of magnitude faster., Comment: 15 pages, 10 figures. Accepted for publication in A&A

Standardising the representation of biomedical knowledge among all researchers is an insurmountable task, hindering the effectiveness of many computational methods. To facilitate harmonisation and interoperability despite this fundamental challenge, we propose to standardise the framework of knowledge graph creation instead. We implement this standardisation in BioCypher, a FAIR (findable, accessible, interoperable, reusable) framework to transparently build biomedical knowledge graphs while preserving provenances of the source data. Mapping the knowledge onto biomedical ontologies helps to balance the needs for harmonisation, human and machine readability, and ease of use and accessibility to non-specialist researchers. We demonstrate the usefulness of this framework on a variety of use cases, from maintenance of task-specific knowledge stores, to interoperability between biomedical domains, to on-demand building of task-specific knowledge graphs for federated learning. BioCypher (https://biocypher.org) frees up valuable developer time; we encourage further development and usage by the community., Comment: 34 pages, 6 figures; submitted to Nature Biotechnology

Lattice simulations of non-zero density QCD introduce the so-called sign problem (complex or negative probabilities), which invalidates importance sampling methods. To circumvent this, we use the Complex Langevin Equation (CLE), to measure the boundary terms and then compare these results with the ones gotten from reweighting, confirming the expectations from previous studies. We also investigate boundary terms in simulations using CLE with dynamic stabilization and compare this, to results calculated with reweighting., Comment: The 39th International Symposium on Lattice Field Theory, LATTICE2022 8th-14th August, 2022 @Bonn - Germany

QCD with infinite heavy quark masses exhibits a first-order thermal transition which is driven by the spontaneous breaking of the global $\mathcal{Z}_3$ center symmetry. We analyze the corresponding order parameter, namely the Polyakov loop and its moments, and show, with a rigorous finite size scaling, that in the continuum limit the transition is of first order. We show that the use of a parallel tempering algorithm can significantly reduce the large auto-correlation times which are mainly caused by the supercritical slowing down. As a result, we calculate the transition temperature $w_0 T_c$ with per-mill precision, and the latent heat, carrying out controlled continuum and infinite volume extrapolations., Comment: 8 pages, presentation at the 39th International Symposium on Lattice Field Theory, 8th-13th August 2022, University of Bonn, Germany

We examine the HI gas kinematics of galaxy pairs in two clusters and a group using Australian Square Kilometre Array Pathfinder (ASKAP) WALLABY pilot survey observations. We compare the HI properties of galaxy pair candidates in the Hydra I and Norma clusters, and the NGC 4636 group, with those of non-paired control galaxies selected in the same fields. We perform HI profile decomposition of the sample galaxies using a tool, {\sc baygaud} which allows us to de-blend a line-of-sight velocity profile with an optimal number of Gaussian components. We construct HI super-profiles of the sample galaxies via stacking of their line profiles after aligning the central velocities. We fit a double Gaussian model to the super-profiles and classify them as kinematically narrow and broad components with respect to their velocity dispersions. Additionally, we investigate the gravitational instability of HI gas disks of the sample galaxies using Toomre Q parameters and HI morphological disturbances. We investigate the effect of the cluster environment on the HI properties of galaxy pairs by dividing the cluster environment into three subcluster regions (i.e., outskirts, infalling and central regions). We find that the denser cluster environment (i.e., infalling and central regions) is likely to impact the HI gas properties of galaxies in a way of decreasing the amplitude of the kinematically narrow HI gas ($M_{\rm{narrow}}^{\rm{HI}}$/$M_{\rm{total}}^{\rm{HI}}$), and increasing the Toomre Q values of the infalling and central galaxies. This tendency is likely to be more enhanced for galaxy pairs in the cluster environment., Comment: Accepted for publication in MNRAS, 25 pages, 20 figures. Supplementary material included (20 pages)

We present the Widefield ASKAP L-band Legacy All-sky Blind surveY (WALLABY) Pilot Phase I HI kinematic models. This first data release consists of HI observations of three fields in the direction of the Hydra and Norma clusters, and the NGC 4636 galaxy group. In this paper, we describe how we generate and publicly release flat-disk tilted-ring kinematic models for 109/592 unique HI detections in these fields. The modelling method adopted here - which we call the WALLABY Kinematic Analysis Proto-Pipeline (WKAPP) and for which the corresponding scripts are also publicly available - consists of combining results from the homogeneous application of the FAT and 3DBAROLO algorithms to the subset of 209 detections with sufficient resolution and S/N in order to generate optimized model parameters and uncertainties. The 109 models presented here tend to be gas rich detections resolved by at least 3-4 synthesized beams across their major axes, but there is no obvious environmental bias in the modelling. The data release described here is the first step towards the derivation of similar products for thousands of spatially-resolved WALLABY detections via a dedicated kinematic pipeline. Such a large publicly available and homogeneously analyzed dataset will be a powerful legacy product that that will enable a wide range of scientific studies., Comment: Accepted to PASA

We present WALLABY pilot data release 1, the first public release of HI pilot survey data from the Wide-field ASKAP L-band Legacy All-sky Blind Survey (WALLABY) on the Australian Square Kilometre Array Pathfinder. Phase 1 of the WALLABY pilot survey targeted three $60~{\rm deg}^2$ regions on the sky in the direction of the Hydra and Norma galaxy clusters and the NGC 4636 galaxy group, covering the redshift range of z < 0.08. The source catalogue, images and spectra of nearly 600 extragalactic HI detections and kinematic models for 109 spatially resolved galaxies are available. As the pilot survey targeted regions containing nearby group and cluster environments, the median redshift of the sample of z ~ 0.014 is relatively low compared to the full WALLABY survey. The median galaxy HI mass is $2.3 \times 10^{9}~M_{\odot}$. The target noise level of 1.6 mJy per $30''$ beam and 18.5 kHz channel translates into a $5\sigma$ HI mass sensitivity for point sources of about $5.2 \times 10^{8} \, (D_{\rm L} / \mathrm{100~Mpc})^{2} \, M_{\odot}$ across 50 spectral channels (~200 km/s) and a $5\sigma$ HI column density sensitivity of about $8.6 \times 10^{19} \, (1 + z)^{4}~\mathrm{cm}^{-2}$ across 5 channels (~20 km/s) for emission filling the $30''$ beam. As expected for a pilot survey, several technical issues and artefacts are still affecting the data quality. Most notably, there are systematic flux errors of up to several 10% caused by uncertainties about the exact size and shape of each of the primary beams as well as the presence of sidelobes due to the finite deconvolution threshold. In addition, artefacts such as residual continuum emission and bandpass ripples have affected some of the data. The pilot survey has been highly successful in uncovering such technical problems, most of which are expected to be addressed and rectified before the start of the full WALLABY survey., Comment: 24 pages, 13 figures, 5 tables, accepted for publication in PASA

Evidence for the suppression of collective magnetic behavior of dipolarly interacting Fe nanoparticles is found in Fe-Ag granular multilayers. Interaction of Fe particles located in neighboring Fe layers is studied as a function of the nominal thickness of the Ag layer in between only two Fe layers. The surprisingly increasing interaction with increasing Ag-layer thickness, verified by memory-effect measurements, is explained by the formation of pinholes in the Ag layer at small Ag thicknesses, allowing direct ferromagnetic coupling between Fe particles in neighboring Fe layers which may hinder the frustration of superspins favored by dipolar interactions. At larger Ag thicknesses, the Ag layer is continuous without pinholes and frustration leads to the appearance of the superspin-glass state. The effect of increasing interactions correlates well with the growing deviation at low temperatures of the measured field-cooled (FC) magnetization from the interaction-free FC curve calculated by a model based on the relaxation of two-level systems. Similar phenomenon is reported in a recently published paper (S\'anchez et al., Small 2022, 18, 2106762) where a dense nanoparticle system is studied. The collective magnetic behavior of the particles due to dipolar interactions is suppressed when the anisotropy energy of the individual particles exceeds a certain threshold., Comment: 13 pages, 3 figures

(Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data products. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams are released. The median noise in the continuum images is 41.4 uJy/bm, with a slightly lower median noise of 36.9 uJy/bm in the Stokes V polarization image. The median angular resolution is 11.6"/sin(Dec). The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy/bm, corresponding to a 3-sigma HI column density sensitivity of 1.8 x 10^20 atoms cm^-2 over 20 km/s (for a median angular resolution of 24" x 15"). We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface., Comment: Accepted for publication in A&A, updated Figure 1

The first data release of Apertif survey contains 3074 radio continuum images covering a thousand square degrees of the sky. The observations were performed during August 2019 to July 2020. The continuum images were produced at a central frequency 1355 MHz with the bandwidth of $\sim$150 MHz and angular resolution reaching 10". In this work we introduce and apply a new method to obtain a primary beam model using a machine learning approach, Gaussian process regression. The primary beam models obtained with this method are published along with the data products for the first Apertif data release. We apply the method to the continuum images, mosaic them and extract the source catalog. The catalog contains 249672 radio sources many of which are detected for the first time at these frequencies. We cross-match the coordinates with the NVSS, LOFAR/DR1/value-added and LOFAR/DR2 catalogs resulting in 44523, 22825 and 152824 common sources respectively. The first sample provides a unique opportunity to detect long term transient sources which have significantly changed their flux density for the last 25 years. The second and the third ones combined together provide information about spectral properties of the sources as well as the redshift estimates., Comment: 12 pages, 9 figures; accepted for publication in A&A

The Cosmology Large Angular Scale Surveyor (CLASS) is a polarization-sensitive telescope array located at an altitude of 5,200 m in the Chilean Atacama Desert. CLASS is designed to measure "E-mode" (even parity) and "B-mode" (odd parity) polarization patterns in the Cosmic Microwave Background (CMB) over large angular scales with the aim of improving our understanding of inflation, reionization, and dark matter. CLASS is currently observing with three telescopes covering four frequency bands: one at 40 GHz (Q); one at 90 GHz (W1); and one dichroic system at 150/220 GHz (G). In these proceedings, we discuss the updated design and in-lab characterization of new 90 GHz detectors. The new detectors include design changes to the transition-edge sensor (TES) bolometer architecture, which aim to improve stability and optical efficiency. We assembled and tested four new detector wafers, to replace four modules of the W1 focal plane. These detectors were installed into the W1 telescope, and will achieve first light in the austral winter of 2022. We present electrothermal parameters and bandpass measurements from in-lab dark and optical testing. From in-lab dark tests, we also measure a median NEP of 12.3 $\mathrm{aW\sqrt{s}}$ across all four wafers about the CLASS signal band, which is below the expected photon NEP of 32 $\mathrm{aW\sqrt{s}}$ from the field. We therefore expect the new detectors to be photon noise limited., Comment: 10 pages, 6 figures, to appear in Proc. SPIE Astronomical Telescopes and Instrumentation 2022

The Cosmology Large Angular Scale Surveyor (CLASS) is a telescope array observing the Cosmic Microwave Background (CMB) at frequency bands centered near 40, 90, 150, and 220 GHz. CLASS measures the CMB polarization on the largest angular scales to constrain the inflationary tensor-to-scalar ratio and the optical depth due to reionization. To achieve the long time-scale stability necessary for this measurement from the ground, CLASS utilizes a front-end, variable-delay polarization modulator on each telescope. Here we report on the improvements in stability afforded by front-end modulation using data across all four CLASS frequencies. Across one month of modulated linear polarization data in 2021, CLASS achieved median knee frequencies of 9.1, 29.1, 20.4, and 36.4 mHz for the 40, 90, 150, and 220 GHz observing bands. The knee frequencies are approximately an order of magnitude lower than achieved via CLASS pair-differencing orthogonal detector pairs without modulation., Comment: Submitted to SPIE Astronomical Telescopes + Instrumentation 2022 Conference (AS22)

Fast Radio Bursts must be powered by uniquely energetic emission mechanisms. This requirement has eliminated a number of possible source types, but several remain. Identifying the physical nature of Fast Radio Burst (FRB) emitters arguably requires good localisation of more detections, and broadband studies enabled by real-time alerting. We here present the Apertif Radio Transient System (ARTS), a supercomputing radio-telescope instrument that performs real-time FRB detection and localisation on the Westerbork Synthesis Radio Telescope (WSRT) interferometer. It reaches coherent-addition sensitivity over the entire field of the view of the primary dish beam. After commissioning results verified the system performed as planned, we initiated the Apertif FRB survey (ALERT). Over the first 5 weeks we observed at design sensitivity in 2019, we detected 5 new FRBs, and interferometrically localised each of these to 0.4--10 sq. arcmin. All detections are broad band and very narrow, of order 1 ms duration, and unscattered. Dispersion measures are generally high. Only through the very high time and frequency resolution of ARTS are these hard-to-find FRBs detected, producing an unbiased view of the intrinsic population properties. Most localisation regions are small enough to rule out the presence of associated persistent radio sources. Three FRBs cut through the halos of M31 and M33. We demonstrate that Apertif can localise one-off FRBs with an accuracy that maps magneto-ionic material along well-defined lines of sight. The rate of 1 every ~7 days next ensures a considerable number of new sources are detected for such study. The combination of detection rate and localisation accuracy exemplified by the 5 first ARTS FRBs thus marks a new phase in which a growing number of bursts can be used to probe our Universe., Comment: Accepted version

Context. Phased Array Feeds (PAFs) are multi element receivers in the focal plane of a telescope that make it possible to form simultaneously multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers and carried out several observing programs including two imaging surveys and a time domain survey. The Apertif imaging surveys use a configuration, where 40 partially overlapping compound beams (CBs) are simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This manuscript aims to characterise the response of the 40 Apertif CBs to create frequency-resolved, I, XX and YY polarization empirical beam shapes. The measured CB maps can be used for image deconvolution, primary beam correction and mosaicing of Apertif imaging data. Methods. We use drift scan measurements to measure the response of each of the 40 CBs of Apertif. We derive beam maps for all individual beams in I, XX and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sample the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derive beam maps for each individual WSRT dish as well. Results. We present the frequency and time dependence of the beam shapes and sizes. We compare the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods., Comment: Accepted for publication by A&A, 14 pages, 15 figures

The topology of production networks determines the propagation mechanisms of local shocks and thus the co-movement of industries. As a result, we need a more precisely defined production network to model economic growth accurately. In this study, we analyse Leontief's input-output model from a network theory perspective, aiming to construct a production network in such a way that it allows the most accurate modelling of the propagation mechanisms of changes that generate industry growth. We do this by revisiting a prevalent threshold in the literature that determines industry-industry interdependence. Our hypothesis is that changing the threshold changes the topological structure of the network and the core industries to a large extent. This is significant, because if the production network topology is not precisely defined, the resulting internal propagation mechanisms will be distorted, and thus industry growth modelling will not be accurate. We prove our hypothesis by examining the network topology, and centrality metrics under different thresholds on a network derived from the US input-output accounts data for 2007 and 2012., Comment: 11 pages, 3 figures

We present a deep learning model for finding human-understandable connections between input features. Our approach uses a parameterized, differentiable activation function, based on the theoretical background of nilpotent fuzzy logic and multi-criteria decision-making (MCDM). The learnable parameter has a semantic meaning indicating the level of compensation between input features. The neural network determines the parameters using gradient descent to find human-understandable relationships between input features. We demonstrate the utility and effectiveness of the model by successfully applying it to classification problems from the UCI Machine Learning Repository.

High traffic touch surfaces such as doorknobs, countertops, and handrails can be transmission points for the spread of pathogens, emphasizing the need to develop materials that actively self-sanitize. Metals are frequently used for these surfaces due to their durability, but many metals also possess antimicrobial properties which function through a variety of mechanisms. This work investigates metallic alloys comprised of several bioactive metals with the target of achieving broad-spectrum, rapid bioactivity through synergistic activity. An entropy-motivated stabilization paradigm is proposed to prepare scalable alloys of copper, silver, nickel and cobalt. Using combinatorial sputtering, thin-film alloys were prepared on 100 mm wafers with 50% compositional grading of each element across the wafer. The films were then annealed and investigated for alloy stability. Bioactivity testing was performed on both the as-grown alloys and the annealed films using four microorganisms -- Phi6, MS2, Bacillus subtilis and Escherichia coli -- as surrogates for human viral and bacterial pathogens. Testing showed that after 30 s of contact with some of the test alloys, Phi6, an enveloped, single-stranded RNA bacteriophage that serves as a SARS-CoV 2 surrogate, was reduced up to 6.9 orders of magnitude (>99.9999%). Additionally, the non-enveloped, double-stranded DNA bacteriophage MS2, and the Gram-negative E. coli and Gram-positive B. subtilis bacterial strains showed a 5.0, 6.4, and 5.7 log reduction in activity after 30, 20 and 10 minutes, respectively. Bioactivity in the alloy samples showed a strong dependence on the composition, with the log reduction scaling directly with the Cu content. Concentration of Cu by phase separation after annealing improved activity in some of the samples. The results motivate a variety of themes which can be leveraged to design ideal bioactive surfaces., Comment: 15 pages, 6 figures

We compare the properties of shocked gas in Sgr B2 with maps obtained from 3D simulations of a collision between two fractal clouds. In agreement with $^{13}$CO(1-0) observations, our simulations show that a cloud-cloud collision produces a region with a highly turbulent density substructure with an average $N_{\rm H2}\gtrsim 5\times10^{22}\,\rm cm^{-2}$. Similarly, our numerical multi-channel shock study shows that colliding clouds are efficient at producing internal shocks with velocities of $5-50\,\rm km\,s^{-1}$ and Mach numbers of $\sim4-40$, which are needed to explain the $\sim 10^{-9}$ SiO abundances inferred from our SiO(2-1) IRAM observations of Sgr B2. Overall, we find that both the density structure and the shocked gas morphology in Sgr B2 are consistent with a $\lesssim 0.5\,\rm Myr$-old cloud-cloud collision. High-velocity shocks are produced during the early stages of the collision and can ignite star formation, while moderate- and low-velocity shocks are important over longer time-scales and can explain the extended SiO emission in Sgr B2., Comment: 7 pages, 2 figures, accepted for publication in the Proceedings of the IAU Symposium 362 "Predictive Power of Computational Astrophysics as a Discovery Tool"

We present the first unbiased survey of neutral hydrogen (HI) absorption in the Small Magellanic Cloud (SMC). The survey utilises pilot HI observations with the Australian Square Kilometre Array Pathfinder (ASKAP) telescope as part of the Galactic ASKAP HI (GASKAP-HI) project whose dataset has been processed with the GASKAP-HI absorption pipeline, also described here. This dataset provides absorption spectra towards 229 continuum sources, a 275% increase in the number of continuum sources previously published in the SMC region, as well as an improvement in the quality of absorption spectra over previous surveys of the SMC. Our unbiased view, combined with the closely matched beam size between emission and absorption, reveals a lower cold gas faction (11%) than the 2019 ATCA survey of the SMC and is more representative of the SMC as a whole. We also find that the optical depth varies greatly between the SMC's bar and wing regions. In the bar we find that the optical depth is generally low (correction factor to the optically thin column density assumption of $\mathcal{R}_{\rm HI} \sim 1.04$) but increases linearly with column density. In the wing however, there is a wide scatter in optical depth despite a tighter range of column densities., Comment: Accepted for publication in PASA, 19 pages, 17 figures, 5 tables

We present new results of a 12CO(J=1-0) imaging survey using the Atacama Compact Array (ACA) for 31 HI detected galaxies in the IC 1459 and NGC 4636 groups. This is the first CO imaging survey for loose galaxy groups. We obtained well-resolved CO data (~0.7-1.5 kpc) for a total of 16 galaxies in two environments. By comparing our ACA CO data with the HI and UV data, we probe the impacts of the group environment on the cold gas components (CO and HI gas) and star formation activity. We find that CO and/or HI morphologies are disturbed in our group members, some of which show highly asymmetric CO distributions (e.g., IC 5264, NGC 7421, and NGC 7418). In comparison with isolated galaxies in the xCOLD GASS sample, our group galaxies tend to have low star formation rates and low H2 gas fractions. Our findings suggest that the group environment can change the distribution of cold gas components, including the molecular gas, and star formation properties of galaxies. This is supporting evidence that preprocessing in the group-like environment can play an important role in galaxy evolution., Comment: 42 pages, 29 figures, 6 tables, published in ApJS

We analyse five early science datasets from the APERture Tile in Focus (Apertif) phased array feed system to verify the polarisation capabilities of Apertif in view of future larger data releases. We aim to characterise the source population of the polarised sky in the L-Band using polarised source information in combination with IR and optical data. We use automatic routines to generate full field-of-view Q- and U-cubes and perform RM-Synthesis, source finding, and cross-matching with published radio, optical, and IR data to generate polarised source catalogues. SED-fitting routines were used to determine photometric redshifts, star-formation rates, and galaxy masses. IR colour information was used to classify sources as AGN or star-forming-dominated and early- or late-type. We surveyed an area of 56deg$^2$ and detected 1357 polarised source components in 1170 sources. The fraction of polarised sources is 10.57% with a median fractional polarisation of 4.70$\pm$0.14%. We confirmed the reliability of the Apertif measurements by comparing them with polarised cross-identified NVSS sources. Average RMs of the individual fields lie within the error of the best Milky Way foreground measurements. All of our polarised sources were found to be dominated by AGN activity in the radio regime with most of them being radio-loud (79%) and of the FRII class (87%). The host galaxies of our polarised source sample are dominated by intermediate disc and star-forming disc galaxies. The contribution of star formation to the radio emission is on the order of a few percent for $\approx$10% of the polarised sources while for $\approx$90% it is completely dominated by the AGN. We do not see any change in fractional polarisation for different star-formation rates of the AGN host galaxies., Comment: 24 pages, 21 figures

Microelectronics development is critical to a wide number of DOE projects and mission space. Creating Helpful Incentives to Produce Semiconductors (CHIPS) and manufacturing Application Specific Integrated Circuits (ASIC) are important to DOE, so the infrastructure that allows DOE to carry out its mission needs to exist. This paper discusses the current initiatives and recommends a business model to build an ecosystem for microelectronics design for DOE which includes three main building blocks: the Computer Aided Design (CAD) - Electronic Design Automation (EDA) design tools, basic design IPs, and access to semiconductor fabrication facilities.

Fast radio bursts (FRBs) are extragalactic radio transients of extraordinary luminosity. Studying the diverse temporal and spectral behaviour recently observed in a number of FRBs may help determine the nature of the entire class. For example, a fast spinning or highly magnetised neutron star might generate the rotation-powered acceleration required to explain the bright emission. Periodic, sub-second components, suggesting such rotation, were recently reported in one FRB, and potentially in two more. Here we report the discovery of FRB 20201020A with Apertif, an FRB showing five components regularly spaced by 0.415 ms. This sub-millisecond structure in FRB 20201020A carries important clues about the progenitor of this FRB specifically, and potentially about that of FRBs in general. We thus contrast its features to the predictions of the main FRB source models. We perform a timing analysis of the FRB 20201020A components to determine the significance of the periodicity. We compare these against the timing properties of the previously reported CHIME FRBs with sub-second quasi-periodic components, and against two Apertif bursts from repeating FRB 20180916B that show complex time-frequency structure. We find the periodicity of FRB 20201020A to be marginally significant at 2.5$\sigma$. Its repeating subcomponents cannot be explained as a pulsar rotation since the required spin rate of over 2 kHz exceeds the limits set by typical neutron star equations of state and observations. The fast periodicity is also in conflict with a compact object merger scenario. These quasi-periodic components could, however, be caused by equidistant emitting regions in the magnetosphere of a magnetar. The sub-millisecond spacing of the components in FRB 20201020A, the smallest observed so far in a one-off FRB, may rule out both neutron-star rotation and binary mergers as the direct source of quasi-periodic FRBs., Comment: 13 pages, 6 figures, 3 tables, supplementary material. Submitted to A&A

Plastic deformation of heterogeneous solid structures is often characterized by random intermittent local plastic events. On the mesoscale this feature can be represented by a spatially fluctuating local yield threshold. Here we study the validity of such an approach and the ideal choice for the size of the representative volume element for crystal plasticity in terms of a discrete dislocation model. We find that the number of links representing possible sources of plastic activity exhibits anomalous (super-extensive) scaling which tends to extensive scaling (often assumed in weakest-link models) if quenched short-range interactions are introduced. The reason is that the interplay between long-range dislocation interactions and short-range quenched disorder destroys scale-free dynamical correlations leading to event localization with a characteristic length-scale. Several methods are presented to determine the dynamic length-scale that can be generalized to other types of heterogeneous materials.

QCD with heavy dynamical quarks exhibits a first order thermal transition which is driven by the spontaneous breaking of the global $\mathcal{Z}_3$ center symmetry. Decreasing the quark masses weakens the transition until the corresponding latent heat vanishes at the critical mass. We explore the heavy mass region with three flavors of staggered quarks and analyze the Polyakov loop and its moments in a finite volume scaling study. We calculate the heavy critical mass in the three flavor theory in the infinite volume limit for $N_t=8$., Comment: 8 pages, presentation at the 38th International Symposium on Lattice Field Theory, 26th-30th July 2021, Massachusetts Institute of Technology, USA

Apertif (APERture Tile In Focus) is one of the Square Kilometre Array (SKA) pathfinder facilities. The Apertif project is an upgrade to the 50-year-old Westerbork Synthesis Radio Telescope (WSRT) using phased-array feed technology. The new receivers create 40 individual beams on the sky, achieving an instantaneous sky coverage of 6.5 square degrees. The primary goal of the Apertif Imaging Survey is to perform a wide survey of 3500 square degrees (AWES) and a medium deep survey of 350 square degrees (AMES) of neutral atomic hydrogen (up to a redshift of 0.26), radio continuum emission and polarisation. Each survey pointing yields 4.6 TB of correlated data. The goal of Apercal is to process this data and fully automatically generate science ready data products for the astronomical community while keeping up with the survey observations. We make use of common astronomical software packages in combination with Python based routines and parallelisation. We use an object oriented module-based approach to ensure easy adaptation of the pipeline. A Jupyter notebook based framework allows user interaction and execution of individual modules as well as a full automatic processing of a complete survey observation. If nothing interrupts processing, we are able to reduce a single pointing survey observation on our five node cluster with 24 physical cores and 256 GB of memory each within 24h keeping up with the speed of the surveys. The quality of the generated images is sufficient for scientific usage for 44 % of the recorded data products with single images reaching dynamic ranges of several thousands. Future improvements will increase this percentage to over 80 %. Our design allowed development of the pipeline in parallel to the commissioning of the Apertif system.

In complex Langevin simulations, the insufficient decay of the probability density near infinity leads to boundary terms that spoil the formal argument for correctness. We present a formulation of this term that is cheaply measurable in lattice models, and in principle allows also the direct estimation of the systematic error of the CL method. Results for a toy model, 3d XY model and HDQCD are presented., Comment: 7 pages, 5 figures, contribution to the 38th International Symposium on Lattice Field Theory, LATTICE2021 26th-30th July, 2021 Zoom/Gather@MIT, USA

We present results from our analysis of the Hydra I cluster observed in neutral atomic hydrogen (HI) as part of the Widefield ASKAP L-band Legacy All-sky Blind Survey (WALLABY). These WALLABY observations cover a 60-square-degree field of view with uniform sensitivity and a spatial resolution of 30 arcsec. We use these wide-field observations to investigate the effect of galaxy environment on HI gas removal and star formation quenching by comparing the properties of cluster, infall and field galaxies extending up to $\sim5R_{200}$ from the cluster centre. We find a sharp decrease in the HI-detected fraction of infalling galaxies at a projected distance of $\sim1.5R_{200}$ from the cluster centre from $\sim0.85\%$ to $\sim0.35\%$. We see evidence for the environment removing gas from the outskirts of HI-detected cluster and infall galaxies through the decrease in the HI to $r$-band optical disc diameter ratio. These galaxies lie on the star forming main sequence, indicating that gas removal is not yet affecting the inner star-forming discs and is limited to the galaxy outskirts. Although we do not detect galaxies undergoing galaxy-wide quenching, we do observe a reduction in recent star formation in the outer disc of cluster galaxies, which is likely due to the smaller gas reservoirs present beyond the optical radius in these galaxies. Stacking of HI non-detections with HI masses below $M_{\rm{HI}}\lesssim10^{8.4}\,\rm{M}_{\odot}$ will be required to probe the HI of galaxies undergoing quenching at distances $\gtrsim60$ Mpc with WALLABY., Comment: 18 pages, 10 figures, accepted for publication in MNRAS

Ocean eddies play an important role in the transport and mixing processes of the ocean due to their ability to transport material, heat, salt, and other tracers across large distances. They exhibit at least two timescales; an Eulerian lifetime associated with persistent identifiable signatures in gridded fields such as vorticity or sea-surface height, and multiple Lagrangian or material coherence timescales that are typically much shorter. We propose a method to study the multi-timescale material transport, leakage, and entrainment by eddies with their surroundings by constructing sequences of finite-time coherent sets, computed as superlevel sets of dominant eigenfunctions of dynamic Laplace operators. The dominant eigenvalues of dynamic Laplace operators defined on time intervals of varying length allows us to identify a maximal coherence timescale that minimizes the rate of mass loss over a domain, per unit flow time. We apply the method to examine the persistence and material coherence of an Agulhas ring, an ocean eddy in the South Atlantic ocean, using particle trajectories derived from a $0.1^\circ$ global numerical ocean simulation. Using a sequence of sliding windows, the method is able to identify and track a persistent eddy feature for a time much longer than the maximal coherence timescale, and with considerably larger material transport than the corresponding eddy feature identified from purely Eulerian information. Furthermore, the median residence times of fluid in the identified feature far exceed the timescale over which fully material motion is guaranteed. Through residence time calculations, we find that this particular eddy does not exhibit a long-lived coherent inner core and that the bulk of material transport is performed by the quasi-coherent outer ring of the eddy., Comment: 34 pages, 13 figures

We present the most sensitive and detailed view of the neutral hydrogen (HI) emission associated with the Small Magellanic Cloud (SMC), through the combination of data from the Australian Square Kilometre Array Pathfinder (ASKAP) and Parkes (Murriyang), as part of the Galactic Australian Square Kilometre Array Pathfinder (GASKAP) pilot survey. These GASKAP-HI pilot observations, for the first time, reveal HI in the SMC on similar physical scales as other important tracers of the interstellar medium, such as molecular gas and dust. The resultant image cube possesses an rms noise level of 1.1 K (1.6 mJy/beam) per 0.98 km s$^{-1}$ spectral channel with an angular resolution of 30$''$ ($\sim$10 pc). We discuss the calibration scheme and the custom imaging pipeline that utilizes a joint deconvolution approach, efficiently distributed across a computing cluster, to accurately recover the emission extending across the entire $\sim$25 deg$^2$ field-of-view. We provide an overview of the data products and characterize several aspects including the noise properties as a function of angular resolution and the represented spatial scales by deriving the global transfer function over the full spectral range. A preliminary spatial power spectrum analysis on individual spectral channels reveals that the power-law nature of the density distribution extends down to scales of 10 pc. We highlight the scientific potential of these data by comparing the properties of an outflowing high velocity cloud with previous ASKAP+Parkes HI test observations., Comment: Accepted for publication in PASA, 34 pages, 18 figures, 5 tables

Using the Australian Square Kilometre Array Pathfinder to measure 21-cm absorption spectra toward continuum background sources, we study the cool phase of the neutral atomic gas in the far outer disk, and in the inner Galaxy near the end of the Galactic bar at longitude 340 degrees. In the inner Galaxy the cool atomic gas has a smaller scale height than in the solar neighborhood, similar to the molecular gas and the superthin stellar population in the bar. In the outer Galaxy the cool atomic gas is mixed with the warm, neutral medium, with the cool fraction staying roughly constant with Galactic radius. The mean spin temperature, i.e. the ratio of the emission brightness temperature to the absorption, is roughly constant for velocities corresponding to Galactic radius greater than about twice the solar circle radius. The ratio has a value of about 300 K, but this does not correspond to a physical temperature in the gas. If the gas causing the absorption has kinetic temperature of about 100 K, as in the solar neighborhood, then the value 300 K indicates that the fraction of the gas mass in this phase is one-third of the total HI mass., Comment: 29 pages, 12 figures, submitted to Astrophysical Journal

Active galactic nuclei (AGN) at the centres of galaxies can cycle between periods of activity and of quiescence. Characterising the duty-cycle of AGN is crucial for understanding their impact on the evolution of the host galaxy. For radio AGN, their evolutionary stage can be identified from a combination of morphological and spectral properties. We summarise the results we have obtained in the last few years by studying radio galaxies in various crucial phases of their lives, such as remnant and restarted sources. We used morphological information derived from LOw Frequency ARray (LOFAR) images at 150 MHz, combined with resolved spectral indices maps, obtained using recently released images at 1400 MHz from the APERture Tile In Focus (Apertif) phased-array feed system installed on the Westerbork Synthesis Radio Telescope. Our study, limited so far to the Lockman Hole region, has identified radio galaxies in the dying and restarted phases. We found large varieties in their properties, relevant for understanding their evolutionary stage. We started by quantifying their occurrences, the duration of the 'on' (active) and 'off' (dying) phase, and we compared the results with models of the evolution of radio galaxies. In addition to these extreme phases, the resolved spectral index images can also reveal interesting secrets about the evolution of apparently normal radio galaxies. The spectral information can be connected with, and used to improve, the Fanaroff--Riley classification, and we present one example of this, illustrating what the combination of the LOFAR and Apertif surveys now allow us to do routinely., Comment: Accepted for publication in the special issue of Galaxies, proceedings of the conference Radio Galaxies in the Cosmic Web. 19 pages, 6 figures

Automatic affect recognition using visual cues is an important task towards a complete interaction between humans and machines. Applications can be found in tutoring systems and human computer interaction. A critical step towards that direction is facial feature extraction. In this paper, we propose a facial feature extractor model trained on an in-the-wild and massively collected video dataset provided by the RealEyes company. The dataset consists of a million labelled frames and 2,616 thousand subjects. As temporal information is important to the emotion recognition domain, we utilise LSTM cells to capture the temporal dynamics in the data. To show the favourable properties of our pre-trained model on modelling facial affect, we use the RECOLA database, and compare with the current state-of-the-art approach. Our model provides the best results in terms of concordance correlation coefficient.