Search

Regardless of how soil is defined, soils are the most diverse of all ecosystems. It is estimated that 25–30% of all species on Earth live in soils for all or part of their lives (Decaens et al. 2006). A single gram of soil is estimated to contain 1 × 109 microorganisms, roughly the same population size as the number of humans in Africa (Microbiology by Numbers 2011). That same gram of soil likely contains 4000 species. They are only one part of a larger food web, however, that includes roundworms (phylum Nematoda), springtails (order Collembola), and other fauna (Fig. 5.1). The soil fauna has equally astounding numbers (e.g., 40,000 springtails in 1 m2). Soil organisms, ranging from microbes to moles (family Talpidae), promote crop growth and livestock production (Barrios 2007; Kibblewhite et al. 2008), produce antibiotics (Wall et al. 2015), control nutrient loads in surface soils and groundwater (De Vries et al. 2011), and regulate greenhouse gas emissions (Singh et al. 2010).

Forests are major sources of terrestrial CH4 and CO2 fluxes but not all surfaces within forests have been measured and accounted for. Stem respiration is a well-known source of CO2, but more recently tree stems have been shown to be sources of CH4 in wetlands and upland habitats. A study transect was established along a natural moisture gradient, with one end anchored in a forested wetland, the other in an upland forest and a transitional zone at the midpoint. Stem and soil fluxes of CH4 and CO2 were measured using static chambers during the 2013 and 2014 growing seasons, from May to October. Mean stem CH4 emissions were 68.8 ± 13.0 (mean ± standard error), 180.7 ± 55.2 and 567.9 ± 174.5 µg m−2 h−1 for the upland, transitional and wetland habitats, respectively. Mean soil methane fluxes in the upland, transitional and wetland were − 64.8 ± 6.2, 7.4 ± 25.0 and 190.0 ± 123.0 µg m−2 h−1, respectively. Measureable CH4 fluxes from tree stems were not always observed, but every individual tree in our experiment released measureable CH4 flux at some point during the study period. These results indicate that tree stems represent overlooked sources of CH4 in forested habitats and warrant investigation to further refine CH4 budgets and inventories.

Some Asian megascolecid earthworms, e.g. Amynthas agrestis and Amynthas tokioensis, are highly invasive and have only recently been reported from natural ecosystems in the northeastern USA. There, they are annual earthworms that survive the winter as cocoons (an egg in a tough covering). Hatching occurs in mid-April when temperatures rise consistently above 10 °C. In some years, winter temperatures also reach 10 °C during short warming episodes, but hatchlings then are likely to die when temperatures drop again. To test this hypothesis, soil was collected on 7 sampling dates during January–May 2016 at one site in the Champlain Valley, Vermont and extracted for the cocoons. Both hatched and unhatched cocoons were enumerated and identified to species by both size and sequencing of the mitochondrial cytochrome c oxidase I gene (COI). A regression model on the number of unhatched cocoons over time predicted that ~ a quarter (A. agrestis) and ~ a third (A. tokioensis) would hatch before mid-May; no hatchlings were observed. Thus, hatching during warming periods in winter seemingly resulted in high mortality. Such winter hatching, and loss, may increase with climate warming in the region because winter warming periods should become more common. Climate warming could therefore reduce ability of the invasive earthworms to persist in northern habitats. Conversely, rapid hatching when the soil warms in spring could have an ecological benefit by allowing opportunities to expand at the thermal edge of the range as the climate continues to warm.

Introduction The purpose of this study was to delineate the anatomic relationship between the anterior articular capsule and the adjacent subscapularis by measuring the dimensions of the anterior articular capsule attachment and the subscapularis footprint on the humerus, as well as investigating the interface between the two structures. Materials and methods Three shoulder specimens underwent histological analysis; for histological analysis, cross-sections through the subscapularis-capsule complex were harvested at the tendinous and muscular insertion sites. The dimensions of the anterior articular capsule attachment and the subscapularis footprint (including the tendinous and muscular insertions) were measured in thirteen cadaveric shoulder specimens. Results Histologically, the articular capsule has thin and loosely arranged collagen fibers with many interspersing fibroblast nuclei, whereas the outer layer of the articular capsule blends into a layer of more loosely spaced and less organized collagen fibers. This interface between the subscapularis and the underlying articular capsule is filled with more loosely spaced and less organized collagen fibers. The macroscopic evaluation showed that the minimum articular capsule width (4.2 mm, SD 2.2 mm) was located at its initiation 4.9 mm (SD, 2.1 mm) inferior to the superior margin of the subscapularis; the corresponding subscapularis footprint width measured 10.1 mm (SD, 4.9 mm). The maximum articular capsule width was11.1 mm (SD, 3.7 mm) and was located 5 mm distal to the inferior margin of the tendinous footprint. The maximum subscapularis footprint width was 15.8 mm (SD, 2.9 mm); the corresponding articular capsule attachment measured 5.2 mm (SD, 1.8 mm). Conclusions Our results suggest that the anterior articular capsule attachment of the glenohumeral joint complements the footprint of the subscapularis and occupies a larger area of the lesser tubercle and metaphysis of the humerus than previously documented. The histological study confirms the presence of a demarcation between the subscapularis and articular capsule, specifically more significant at the region medial to the tendon insertion and at the muscular insertion of the subscapularis.

Earthworm species with different feeding, burrowing, and/or casting behaviors can lead to distinct microbial communities through complex direct and indirect processes. European earthworm invasion into temperate deciduous forests in North America has been shown to alter microbial biomass in the soil and reduce the fungi-to-bacteria ratios. It is unclear how changes in earthworm species composition due to interspecific competition may alter this dynamics, especially under the ongoing invasion by Asian Amynthas and Metaphire species. Furthermore, it is also poorly understood how interspecific interactions involving different species may have species-dependent, non-additive effects on different groups of soil microorganisms. By conducting a two-year field experiment in a deciduous forest in the Mid-Atlantic, we examined how the Asian species Amynthas agrestis and Amynthas corticis , the European species Lumbricus rubellus and Octolasion lacteum , and their interactions affect soil microbial communities, and tested the hypotheses that the Asian species and the interaction between the two European species negatively affect bacterial biomass. We showed that while A. corticis generally had no effect on soil microorganisms, A. agrestis had a positive effect on microbial biomass, primarily by increasing the biomass of Gram-positive and Gram-negative bacteria. Consistent with our hypothesis, the interaction between L. rubellus and O. lacteum had a negative effect on bacteria biomass. We concluded that the ongoing invasion of the Asian earthworm A. agrestis in forest soils and potential displacement of L. rubellus due to interspecific competition may lead to increased bacterial biomass through increasing resource availability and disrupting the interaction between L. rubellus and O. lacteum , potentially causing increased carbon mineralization and reducing soil carbon storage.

Earthworm invasions are one of the most serious causes of ecological deterioration in the temperate deciduous forests of North America. Non-native earthworms impact understory vegetation, leaf litter layer, carbon dynamics, nutrient availability, and the associated food webs. Here we report a significant status change and confirm expansion of known range of Amynthas agrestis, one of the most serious invasive species in North America, and two of its close relatives, A. tokioensis and Metaphire hilgendorfi. The three species have never been confirmed to co-occur in North American ecosystems. We examined 1760 earthworms collected from 30 sites across northeastern USA, and identified them using a new morphological key. Our data show that sympatric occurrence of at least two, and often all three, species is more common than having only one species. In addition, A. tokioensis was dominant in many of these earthworm communities. The status change in species composition from only one species to two or three and the shift in dominance are most likely caused by previous incorrect species identification. Our results support expansion of known range of A. tokioensis and M. hilgendorfi northward and westward into states with colder winters. This range expansion may have taken place alongside that of A. agrestis in the last 10–20 years, but has long been overlooked. Altogether, results highlight an urgent need for correct species identification. The recognition of an expanding multi-species system represents a unique opportunity to further evaluate complex interactions among co-invading and resident species, and to investigate whether interspecific interactions have unexpected non-additive impacts on ecological processes.

Background The study proposed a novel method for converting a radiographic guide into a surgical guide and evaluated its accuracy. Materials and Methods Radiographic guide was reformed with the addition of index rods for geometric conversion method (GCM). Planning implants were projected on geometric projection planes, and the implant positions were measured. The radiographic guide was converted into surgical guide using a generic bench drill machine with GCM data. Two experiments were designed to validate the GCM. (1) In vitro test: Twenty implants were placed on five edentulous dental models by using the GCM (group 1) and Stereolithography (SLA) method (group 2), respectively. The deviations of planned and placed implant were calculated, and the precision error (PE) value was calculated to evaluate the stability of the GCM and SLA. (2) In vivo test: Nine edentulous subjects were selected for clinical implant surgery with the GCM guide. Two level of the index rods of radiographic guides were prepared for surgical guides forming. The differences between the planned and actual implants were calculated in implant head, apex, and angulation. Results The in vitro test revealed no significant differences in the planned and placed angulations between groups 1 and 2 (P > .05). The PE was not significantly different between groups 1 and 2 (P > .05). The in vivo test revealed a successful treatment of the subjects, and 16 implant sites were evaluated. The results indicated that GCM guide could achieve the three-dimensional (3D) offset deviations of 1.03 ± 0.27 mm and 1.17 ± 0.24 mm at the implant head and apex, respectively, and 1.37° ± 0.21° for the 3D angulation. Conclusion The novel method for converting a radiographic guide into a surgical guide appears accurate and stable compared with SLA.

Prof. Pietro Omodeo (University of Siena, Italy), the world-renowned earthworm taxonomist and evolutionary biologist, was born in Cefalù, Sicily, Italy on the 27th September, 1919. He celebrates his 100th birthday in 2019 and members of the international community of earthworm taxonomists salute him with Petroscolex centenarius gen. et sp. nov., a new megadrile taxon discovered in 1991 by him but which has not been formally described until now. The many important contributions of Omodeo to oligochaetological research are briefly mentioned.

This study describes two new species of earthworms belonging to the genus Amynthas (Oligochaeta: Megascolecidae) from central Taiwan. They are named Amynthas luridus sp. nov. and Amynthas ruiyenensis sp. nov. Both species are octothecal with the former found at elevations of 1500–2300 m and the latter at an elevation of 2200 m from the Central Mountain Range. In addition, DNA barcodes are made available for the first time for the following species: Amynthas catenus Tsai et al., 2001, Amynthas exiguus aquilonius Tsai et al., 2001, Amynthas proasacceus Tsai et al., 2001, Amynthas hohuanmontis Tsai et al., 2002, Amynthas tessellatus Shen et al., 2002, Amynthas fenestrus Shen et al., 2003, Amynthas tantulus Shen et al., 2003, and Amynthas uvaglandularis Shen et al., 2003. Furthermore, Amynthas exiguus ssp. aquilonius Tsai et al., 2001 distributed at elevations of 2200–3000 m in the Central Mountain Range is elevated to species level, as A. aquilonius Tsai et al., 2001. The highest altitude record so far for the exotic Eukerria saltensis (Beddard, 1895) in Taiwan, 2200 m above sea level, is documented. Moreover, some recent assignments of species to Amynthas and Metaphire and synonymies of names are critically discussed. It is argued that idiosyncratic genus concepts, inadequate species comparisons, and unexplained synonymies should be avoided. A hitherto undetected and possibly monophyletic species group of mainly Korean Amynthas species in the A. tokioensis-group is indicated, characterized by numerous genital papillae around each spermathecal pore and male porophore, large ampullae, long diverticula, large prostate glands, and manicate intestinal caeca. The names A. bimaculata, A. silvatica and A. surcata (Ishizuka, 1999), as well as A. odaesanensis, A. righii, A. fasciiformis, and A. sanchongensis Hong & James, 2001, previously declared as junior synonyms of A. tappensis (Ohfuchi, 1935), are revalidated.

Introduction Elastic stable intramedullary nailing (ESIN) is a treatment strategy for the management of diaphyseal long-bone fractures in adolescents and children, but few studies have investigated the mechanical stability of tibial diaphyseal fractures treated with various degrees of prebending of the elastic nails. Therefore, the aim of this study was to compare the mechanical stability, including the gap deformation and nail dropping, of a tibia fracture with various fracture sites and fixed with various degrees of prebending of the elastic nails by the finite element method. Furthermore, the contribution of end caps to stability was taken into consideration in the simulation. Methods A tibia model was developed with a transverse fracture at the proximal, middle and distal parts of the diaphysis, and fixed with three degrees of prebending of elastic nails, including those equal to, two times and three times the diameter of the intramedullary canal. The outer diameter of the nail used in the computation was 3.5 mm, and the fractured tibia was fixed with two elastic double C-type nails. Furthermore, the proximal end of each nail was set to free or being tied to the surrounding bone by a constraint equation to simulate with or without using end caps. Results The results indicated that using end caps can prevent the fracture gap from collapsing by stopping the ends of the nails from dropping back in all prebending conditions and fracture patterns, and increasing the prebending of the nails to a degree three times the diameter of the canal reduced the gap shortening and the dropping distance of the nail end in those without using end caps under axial compression and bending. Insufficient prebending of the nails and not using end caps caused the gap to collapse and the nail to drop back at the entry point under loading. Conclusions Using end caps or increasing the prebending of the nails to three times the diameter of the canal is suggested to stop the nail from dropping back and thus produce a more stable structure, with less gap deformation, in the management of a simulated tibial diapyhseal fracture by using titanium elastic nails with a double C-shape.

Soil respiration is frequently measured as a surrogate for biological activities and is important in soil carbon cycling. The heterotrophic component of soil respiration is primarily driven by microbial decomposition of leaf litter and soil organic matter, and is partially controlled by resource availability. In North American temperate deciduous forests, invasive European and Asian earthworms are known to variously affect soil properties and resource availability through their feeding, burrowing, and casting behaviors, and may affect different components of soil respiration through modulating the microbial communities. By tracing litter-derived C from 13C and 15N double-enriched leaf litter into soil and CO2 efflux in a mesocosm experiment, we tested the hypothesis that earthworms inhibit litter C-derived soil respiration by reducing resource availability and microbial biomass, and further examined how species-specific effects of earthworms on soil respiration are mediated by soil microbial community. We showed that while earthworms generally had no effect on total soil respiration, the interaction between Octolasion lacteum and Lumbricus rubellus had a significant negative non-additive effect, presumably through affecting anaerobic microsites in the soil. Moreover, litter C-derived soil respiration was reduced by the Asian Amynthas hilgendorfi, the European L. rubellus, and the North American native species Eisenoides lonnbergi, but not by the European species O. lacteum. Phospholipid fatty acid (PLFA) analysis and structural equation modeling indicated that while soil bacteria and fungi abundances were affected by earthworm species identities, the observed reduction of litter C-derived soil respiration could not be fully explained by changes in microbial biomass. We attributed these effects to earthworm-induced aggregate formation, reduction of microbial transformation of labile carbon, and antimicrobial peptide activities, and concluded that the mechanisms through which the four earthworm species affect the fate of litter-derived C and its mineralization are species-specific.

This study describes four new species of earthworms belonging to the genus Amynthas (Megascolecidae: Oligochaeta) from southwestern Taiwan. They are Amynthas quadriorbis sp. nov., Amynthas douliouensis sp. nov., Amynthas tsou sp. nov. and Amynthas dinghuensis sp. nov. The former three species are sexthecate with three pairs of spermathecal pores in 6/7–8/9 whereas A. dinghuensis is a small, octothecate earthworm with four pairs of spermathecal pores in 5/6–8/9. Amynthas quadriorbis and A. douliouensis were found in the foothills at elevations

This study investigated the biomechanical response of porous cages and lumbar spine segments immediately after surgery and after bone fusion, in addition to the long-term effects of various posterior lumbar interbody fusion (PLIF) techniques, by using the finite element method. Lumbar L3-L4 models based on three PLIF techniques (a single cage at the center of the intervertebral space, a single cage half-anterior to the intervertebral space, and two cages bilateral to the intervertebral space) with and without bone ingrowth were used to determine the biomechanical response of porous cages and lumbar segments instrumented with porous titanium cages (cage porosity=50%, pore diameter=1mm). The results indicated that bone fusion enhanced the stability of the lumbar segments with porous cages without any posterior instrumentation and reduced the peak von Mises stress in the cortical bones and porous cages. Two cages placed bilateral to the intervertebral space achieved the highest structural stability in the lumbar segment and lowest von Mises stress in the cages under both bone fusion conditions. Under identical loading (2-Nm), the range of motion in the single cage at the center of the intervertebral space with bone fusion decreased by 11% (from 1.18? to 1.05?) during flexion and by 66.5% (from 4.46? to 1.5?) during extension in the single cage half-anterior to the intervertebral space with bone fusion compared with no-fusion models. Thus, two porous titanium cages with 50% porosity can achieve high stability of a lumbar segment with PLIF. If only one cage is available, placing the cage half-anterior to the intervertebral space is recommended for managing degenerated lumbar segments. A numerical model containing porous cages and a lumbar segment was developed.The bone tissue ingrowth into the pores of the cage is considered.Bone fusion enhances the stability of the lumbar segment with a porous cage.Bone fusion also reduces the peak von Mises stress in the cortical bone and porous cage.

Peregrine pheretimoid earthworms, commonly known as jumping worms, are members of the family Megascolecidae that have become widely established outside of their native ranges. In many parts of the world this represents a second wave of earthworm invasions, following the introduction of peregrine European earthworms in the family Lumbricidae during the colonial era. Forest ecologists, turf managers, gardeners, and other land managers are concerned about the observed or presumed negative effects of jumping worms on invaded habitats. Although research on jumping worms has accelerated in recent decades, our understanding of their ecology remains limited. We compiled techniques useful to researchers working to fill voids in our understanding. Similar past efforts have focused on tools used to study common European species. Differences in life cycle, behavior, morphology, and physiology make it difficult to transfer experiences with European earthworms to pheretimoids. For example, the loss of reproductive features in many pheretimoid populations poses a challenge for identification, and techniques for individually tagging lumbricid earthworms have been less successful for megascolecids. The active and ongoing expansion of pheretimoid populations in many areas requires increased attention on distributed methods, such as citizen-science protocols, for detecting and tracking their expansion. Finally, the desire to limit populations of pheretimoids, including those invading gardens and other environments that might be successfully restored, has exposed the lack of options for targeted, effective control of unwanted earthworms. We identify opportunities to address these voids in our methodological tool kit and encourage the adaptation of techniques previously used in the study and management of other invasive animals.

This study describes two new species of earthworms belonging to the genus Drawida (Oligochaeta: Moniligastridae) from southwestern Taiwan. They are Drawida alishanensis sp. nov. and Drawida fenqihuensis sp. nov. The two species were found at elevations of 1407–1661 m in the Alishan area, Chiayi County. DNA barcodes from type specimens of the new species are reported. This is the first time that new species of Drawida are discovered from the island of Taiwan. In addition, Drawida keikiensis Kobayashi, 1938 from Korea is found to be synonymous with Drawida syringa Chen, 1933 from central China. The synonymy of Drawida glabella Chen, 1938 with Drawida barwelli (Beddard, 1886) is rejected.

In temperate deciduous forests of eastern USA, most earthworm communities are dominated by invasive species. Their structure and functional group composition have critical impacts on ecological properties and processes. However, the factors determining their community structure are still poorly understood, and little is known regarding their dynamics during forest succession and the mechanisms leading to these changes. Earthworm communities are usually assumed to be stable and driven by vegetation. In contrast, the importance of dispersal and ecological drift is seldom acknowledged. By analyzing a 19-year dataset collected from forest stands in eastern USA, we demonstrated that on a decadal timescale, earthworm community dynamics are shaped by the interplay of selection, dispersal, and ecological drift. We highlighted that forests at different successional stages have distinct earthworm species and functional groups as a result of environmental filtering through leaf litter quality. Specifically, young forests are characterized by soil-feeding species that rely on relatively fresh soil organic matter derived from fast-decomposing litter, whereas old forests are characterized by those feeding on highly processed soil organic matter derived from slow-decomposing litter. In addition, year-to-year species gains and losses are primarily driven by dispersal from regional to local species pools, and by local extinction resulted from competition and ecological drift. We concluded that with continued dispersal of European species and the recent "second wave" of earthworm invasion by Asian species from the surrounding landscape, earthworms at the investigated forests are well-established, and will remain as the major drivers of soil development for the foreseeable future.

Introduction To date, the effects of various screw configurations on the stability of tibial tubercle osteotomy (TTO) are not completely understood. Hence, the first aim of this study is to evaluate the stability of TTO under various screw configurations. The second aim is to evaluate the internal stresses in the bone and the contact forces on the bone fragment that are developed by the tibia and screws in response to the applied load after the equilibrant is revealed. Methods To calculate the biomechanical responses of the bone and screw under loading, finite element (FE) method was used in this study. Six types of screw configurations were studied in the simulation: two parallel horizontal screws placed at a 20 mm interval, two parallel horizontal screws placed at a 30 mm interval, two parallel upward screws, two parallel downward screws, two trapezoid screws, and two divergent screws. The displacement of the bone fragment, contact forces on the fragment, and the internal stress in the bone were used as indices for comparison. Results Among all configurations, the configuration of two parallel downward screws yielded the highest stability with the lowest fragment displacement and gap opening. Although the maximum displacement of the TTO with the configuration of two parallel horizontal screws was slightly higher than that of the downward configuration, the difference was only 0.2 mm. The configuration of two upward screws resulted in the highest fragment displacement and gap deformation between the fragment and tibia. The stress of the osteotomized bone fragment was highest with the configuration of two upward screws. Conclusion Based on the present model, the current configuration of two parallel horizontal screws is recommended for TTO. If this is inappropriate in a specific clinical scenario, then the downward screw configuration may be used as an alternative. By contrast, the configuration of two parallel upward screws is least suggested for the fixation of TTO.

In the present study, the neuroprotective potential of magnolol against ischemia-reperfusion brain injury was examined via in vivo and in vitro experiments. Magnolol exhibited strong radical scavenging and antioxidant activity, and significantly inhibited the production of interleukin‑6, tumor necrosis factor‑a and nitrite/nitrate (NOX) in lipopolysaccharide-stimulated BV2 and RAW 264.7 cells when applied at concentrations of 10 and 50 µM, respectively. Magnolol (100 µM) also significantly attenuated oxygen‑glucose deprivation‑induced damage in neonatal rat hippocampal slice cultures, when administered up to 4 h following the insult. In a rat model of stable ischemia, compared with a vehicle‑treated ischemic control, pretreatment with magnolol (0.01‑1 mg/kg, intravenously) significantly reduced brain infarction following ischemic stroke, and post‑treatment with magnolol (1 mg/kg) remained effective and significantly reduced infarction when administered 2 h following the onset of ischemia. Additionally, magnolol (0.3 and 1 mg/kg) significantly reduced the accumulation of superoxide anions at the border zones of infarction and reduced oxidative damage in the ischemic brain. This was assessed by measuring the levels of NOX, malondialdehyde and myeloperoxidase, the ratio of glutathione/oxidized glutathione and the immunoreactions of 8‑hydroxy‑2'‑deoxyguanosine and 4‑hydroxynonenal. Thus, magnolol was revealed to protect against ischemia‑reperfusion brain damage. This may be partly attributed to its antioxidant, radical scavenging and anti‑inflammatory effects.

International audience; Pontoscolex corethrurus is the most widespread earthworm species in tropical and sub-tropical zones and one of the most studied in soil science. Although, ecological interactions of P. corethrurus with its environment are well documented, the taxonomic status of the species remains unclear. In this study, we investigated phylogenetic relationships within the genus Pontoscolex, in particular focusing on morphologically indistinguishable (i.e., cryptic) lineages. A total of 792 specimens collected from 25 different countries and islands all over the world were analyzed using two mitochondrial (COI and 16S rDNA) and two nuclear (internal transcribed spacers 2 and 28S rDNA) markers, and a total of 11 morphological characters both internal and external were investigated in all genetically characterized lineages. A large-scale multilocus sequence data matrix was also obtained for Pontoscolex spp. specimens using the Anchored Hybrid Enrichment (AHE) method. Multilocus phylogenetic and phylogenomic analyses, combined with species delimitation methods; including single locus (mPTP, ABGD) and multilocus (BPP) approaches, revealed congruent results. Four cryptic species were supported within the P. corethrurus species complex, and four potentially new species within the genus Pontoscolex. One widespread lineage (L1), within P. corethrurus complex was observed in the current population of Fritz Muller's garden where P. corethrurus was first described in 1856. Cryptic lineages were observed in sympatry at several localities. This, in combination with observed heteroplasmy in COI gene in one population raises an important question of reproductive isolation between these species.

Substrates with a unique stable isotope signature provide researchers with the ability to trace nutrients through food webs. Plant material labeled with carbon (13C) can be produced by exposure to carbon dioxide (CO2) with an isotopic composition that differs from ambient conditions during photosynthesis. Labeling can occur continuously or be repeated over several “pulses.” Each method has a high cost either in the form of expensive control systems or significant time investments. In 2012, we built a large growth chamber and used an inexpensive, open-source ArduinoTM microcontroller to monitor and control interior conditions so that we could produce leaf litter dually enriched in 13C and nitrogen (15N) for future incubation experiments. We performed a labeling experiment on 73 saplings representing seven species in 2012 and repeated the labeling on 30 saplings of one species in 2013. We successfully produced over 1 kg of litter enriched in both isotopes; 15N-enrichment (δ15N: 759.2 ± 133.7‰) was much grea...

This paper addressed a new lane departure warning system (LDWS). We used the side-view cameras to promote Advanced Driver Assistance Systems (ADAS). A left side-view camera detected the right lane next to vehicle, and a right side-view camera detected the right lane. Two cameras processed in their algorithm and gave warning message, independently and separately. Our algorithm combined those warning messages to analyze environment situations. At the end, we used the LUXGEN MPV to test and showed results of verifications and tests.

The objective of this study is to determine the size range where the recovery coefficient (RC) method of fluorodeoxyglucose (FDG) positron emission tomography–computed tomography (PET–CT) is helpful in detecting lateral retropharyngeal lymph (LRPL) nodal metastases of nasopharyngeal carcinoma (NPC) patients previously treated with radiation therapy. A total of 142 LRPL nodes assessed by magnetic resonance imaging (MRI) in 71 NPC patients were chosen for investigation. LRPL nodes with central necrosis, extracapsular invasion, or asymmetric grouping or those ascertained on follow-up MRI scans were considered positive for metastases. The criterion for positive diagnosis of nodal metastasis on FDG PET–CT scans was defined as maximal standard uptake value (SUVmax) ≥ 2.5. Nodes not separated from main tumors were excluded. An established RC method, the sphere-to-background ratio, was employed. Nodes were further categorized into three groups of minimal axial diameters: below 6, 6–7 mm, and above 7 mm. A total of 88 nodes were examined by FDG PET. Thirty-five nodes were positive and 53 nodes were negative. The RC method significantly improved sensitivity (from 20 to 100 %) and accuracy (from 14 to 71 %) for nodes sized 6–7 mm. In LRPL nodes above 7 mm, the RC method also provided slight improvement, with sensitivity and accuracy both increasing from 92 to 96 %. However, the nodal sizes below 6 mm were too small for valid comparisons. In conclusion, partial volume correction in FDG PET–CT enhances the accuracy of detecting nodes in the equivocal size range of 6–7 mm for LRPL nodal metastases of NPC.

[Purpose] Limited research has been performed in spite of biomechanical evaluation of jump landing with kinesio taping. Therefore, the main objective of this study was to evaluate the effect of kinesio taping applied to athletes. In this study, the authors wished to investigate the effect of kinesio taping during a vertical jump with run-up and countermovement jump on ankle functional instability. [Subjects and Methods] Ten male athletes with ankle functional instability (FI) were recruited in this study from a college volleyball team. Each participant was requested to perform two tasks, the countermovement jump and vertical jump with run-up. Infrared high-speed cameras and force plates were used to assess the effect of ankle taping. [Results] The results showed that the peak ground reaction force in the sagittal plane during a vertical jump with run-up slowed down after kinesio taping and that the peak ankle plantar flexion moment in both types of jump also decreased. [Conclusion] In conclusion, this study proved the effect of kinesio taping on ankle functional instability, which was evaluated by measuring the vertical ground reaction force and peak plantar flexion moment. Its finding may allow us to provide some recommendations for athletes and trainers.

Objectives Focal cerebral ischemia may induce synaptic, electrophysiological, and metabolic dysfunction in remote areas. We have shown that the remote dendritic spine density changes and electrophysiological diaschisis in the acute and subacute stages after stroke previously. Here, we further evaluated electrophysiological outcomes and synapto-dendritic plasticity in long-term recovery in the contralateral cortex following focal cerebral ischemia. Methods Male Sprague-Dawley rats were subjected to intraluminal suture occlusion for 90 min or sham-occlusion. Somatosensory electrophysiological recordings (SSEPs) and neurobehavioral tests were recorded each day for 28 days. Postmortem brains were sectioned and subjected to Nissl staining and Golgi-Cox impregnation through a 28-day period following ischemic stroke. Results In the ipsilateral cortex, infarct size in the cortex and striatum was decreased after the subacute stage; the brains showed reduced swelling in the cortex and stratum 3 days after ischemic insults. Dendritic spine density and SSEP amplitude decreased significantly during a 28-day recovery period. In the contralateral cortex, dendritic spine density and SSEP amplitude decreased significantly for 21 days after ischemic stroke, but recovered to baseline by day 28. The deterioration of the dendritic spine (density reduction) in the ischemic cortex was observed; however, this increased neuroplasticity in the contralateral cortex in the subacute stage. Discussion Focal cerebral ischemia-reperfusion induces time-dependent reduction of dendritic spine density and electrophysiological depression in both the ipsilateral and contralateral cortices and intact brain. This neuroanatomical and electrophysiological evidence suggests that neuroplasticity and functional re-organization in the contralateral cortex is possible following focal cerebral ischemia.

Objective: This study aimed to verify and compare the accuracy of energy expenditure (EE) prediction models using shoe-based motion detectors with embedded accelerometers. Methods: Three physical activity (PA) datasets (unclassified, recognition, and intensity segmentation) were used to develop three prediction models. A multiple classification flow and these models were used to estimate EE. The “unclassified” dataset was defined as the data without PA recognition, the “recognition” as the data classified with PA recognition, and the “intensity segmentation” as the data with intensity segmentation. The three datasets contained accelerometer signals (quantified as signal magnitude area (SMA)) and net heart rate (HRnet). The accuracy of these models was assessed according to the deviation between physically measured EE and model-estimated EE. Results: The variance between physically measured EE and model-estimated EE expressed by simple linear regressions was increased by 63% and 13% using SMA and HRnet, respectively. The accuracy of the EE predicted from accelerometer signals is influenced by the different activities that exhibit different count-EE relationships within the same prediction model. Conclusion: The recognition model provides a better estimation and lower variability of EE compared with the unclassified and intensity segmentation models. Significance: The proposed shoe-based motion detectors can improve the accuracy of EE estimation and has great potential to be used to manage everyday exercise in real time.

Rocker-soled shoes provide a way to reduce the possible concentration of stress, as well as change movement patterns, during gait. This study attempts to examine how plantar force and spatio-temporal variables are affected by two rocker designs, one with softer and one with denser sole materials, by comparing them with the barefoot condition and with flat-soled shoes. Eleven subjects' gait parameters during walking and jogging were recorded. Our results showed that compared with barefoot walking, plantar forces were higher for flat shoes while lower for both types of rocker shoes, the softer-material rocker being the lowest. The plantar force of flat shoes is greater than the vertical ground reaction force, while that of both rocker shoes is much less, 13.87-30.55% body weight. However, as locomotion speed increased to jogging, for all shoe types, except at the second peak plantar force of the denser sole material rocker shoes, plantar forces were greater than for bare feet. More interestingly, because the transmission of force was faster while jogging, greater plantar force was seen in the rocker-soled shoes with softer material than with denser material; results for higher-speed shock absorption in rocker-soled shoes with softer material were thus not as good. In general, the rolling phenomena along the bottom surface of the rocker shoes, as well as an increase in the duration of simultaneous curve rolling and ankle rotation, could contribute to the reduction of plantar force for both rocker designs. The possible mechanism is the conversion of vertical kinetic energy into rotational kinetic energy. To conclude, since plantar force is related to foot-ground interface and deceleration methods, rocker-design shoes could achieve desired plantar force reduction through certain rolling phenomena, shoe-sole stiffness levels, and locomotion speeds.

The family Lumbricidae is arguably the most well-known and well-studied earthworm group due to its dominance in the European earthworm fauna and its invasion in temperate regions worldwide. However, its North American members, especially the genus Bimastos Moore, 1893, are poorly understood. We revised the systematics of the genus Bimastos and tested the hypothesis of the monophyly of North American lumbricids using morphological characters and eight molecular markers. Phylogenetic analyses based on our extensive sampling of Bimastos and inclusion of Dendrodrilus and Allolobophoridella indicated a well-supported clade containing Bimastos and Eisenoides Gates, 1969, and provided the first evidence supporting that North American lumbricids are monophyletic. Assuming the available divergence time estimations and dating of land bridges are correct, it would suggest that the ancestor of this clade arrived North America through Beringia or the De Geer route during Late Cretaceous, and since then the clade has diverged from its Eurasian sister group, Eisenia. The peregrine genera Dendrodrilus and Allolobophoridella are nested within the Bimastos clade; we propose to treat them as junior synonyms of the genus Bimastos, and, contradictory to the commonly held belief of being European, they are indeed part of the indigenous North American earthworm fauna. Morphological characters, such as red-violet pigmentation, proclinate U-shaped nephridial bladders and calciferous diverticula in segment 10 further support this placement. The East Mediterranean-Levantine Spermophorodrilus Bouche, 1975 and Healyella Omodeo & Rota, 1989 are nested within the Dendrobaena sensu lato clade; therefore their close relationship with the North American Bimastos is refuted. Species fit the revised diagnosis of Bimastos are reviewed and keyed, and a new species, Bimastos schwerti sp. nov., is described.

This paper describes five new species of earthworms belonging to the genera Amynthas and Metaphire (Megascolecidae: Oligochaeta) from Matsu, Taiwan. They are Amynthas bimontis sp. nov., Amynthas hsiyinensis sp. nov., Amynthas dongyinensis sp. nov., Amynthas dongjuensis sp. nov. and Metaphire matsuensis sp. nov. Amynthas bimontis is a small, quadrithecate earthworm with two pairs of spermathecal pores in 5/6/7 and two small genital papillae lateral to each male porophore. Amynthas hsiyinensis is quadrithecate with two pairs of spermathecal pores in 7/8/9, has numerous small genital papillae and is morphologically similar to Amynthas polyglandularis (Tsai, 1964) from northern Taiwan. Amynthas dongyinensis is sexthecate with three pairs of spermathecal pores in 6/7–8/9 and has simple male pore structure. Amynthas dongjuensis is octothecate with or without a genital papilla medial to each male pore. Metaphire matsuensis is sexthecate with three pairs of dorsolateral spermathecal pores in 5/6–7/8, and has each...

The earthworm fauna of Plummers Island, Maryland, U.S.A. was surveyed, recording a total of 12 species belonging to the families Lumbricidae, Acanthodrilidae, Megascolecidae, and Sparganophilidae. In addition to the well known peregrine lumbricids and megascolecids the island harbors four North American endemic species: Eisenoides lonnbergi (Michaelsen, 1894) (Lumbricidae), Sparganophilus tamesis Benham, 1892 (Sparganophilidae), Diplocardia caroliniana Eisen, 1899, and furthermore, a new species, Diplocardia zicsii sp. nov. (Acanthodrilidae).

Purpose: Tibial tubercle osteotomy (TTO) is a surgical technique used in the management of severe fractures of the knee joint and revision total knee arthroplasty. Limited research discusses the performance of the osteotomy and fixation of the TTO with screws. Therefore, this study investigated the effects of fragment shape and screw configuration on the mechanical behavior in the fixation of the TTO using the finite element (FE) method. Methods: FE TTO models with three fragment shapes and three screw configurations were developed. The three fragment shapes were a step cut, bevel cut, and straight cut. The screw configurations were two parallel horizontal and downward screws and two trapezoidal screws. A 1654-N upward tension force was applied on the tibia tubercle, and the distal end of the tibia was completely fixed. Results: The results indicated that the step cut resulted in higher stability than the bevel and straight cut, but the stress was higher as well. Among the screw configurations, two parallel downward screws resulted in the highest stability, given the same fragment shape. In the horizontal configuration, the step cut tibia developed the largest contact force to achieve stability of the bone fragment under loading. Conclusion: The fragment shape with a step cut and fixation with two parallel horizontal or downward screws are suggested for TTO, while the trapezoidal screw configuration is not suggested. Furthermore, the downward screw configuration is a suitable strategy to reduce bone stress.

This study evaluated the correlation between the initial stability of a dental implant, quantified as the implant stability quotient (ISQ), and the bone-implant contact percentage ( BIC%).Dental implants were inserted into specimens comprising an artificial cortical shell representing cortical bone and foam bone representing cancellous bone with 4 elastic moduli. Each specimen with an implant was subjected to microcomputed tomography (micro-CT) scanning, from which the 2D and 3D BIC% values were calculated. The values of the Spearman correlation coefficient (r) were calculated between the ISQ and the 2D and 3D BIC% values.Increasing the elasticity of the specimen enhanced the ISQ. There was statistically significant correlation between the ISQ and 3D BIC% values (r = 0.85, P.0001). However, the correlation between ISQ and 2D BIC% values was not statistically significance (r = 0.42, P = .062).The initial implant stability was strongly positively correlated with the 3D BIC%.

Summary What is known and objective The many interactions between warfarin and other drugs and foods generate great challenges for clinicians and patients in maintaining stable anitcoagulation. Interactions due to variable vitamin K content of different dietary items influence the therapy of nearly all patients on warfarin. Unfortunately, there is no widely acceptable, patient-friendly strategy for managing such interactions. In this contribution, we propose a practical approach to managing this troublesome interaction, consisting of ‘maintaining constant weekly dietary vitamin K intake scores’. Methods Twenty-three vitamin K-rich vegetables commonly seen in Taiwanese meals were identified and classified into seven score grades according to their relative vitamin K content per serving. The scores were based on published vitamin K content of different foods. Results and discussion The vitamin K score was equivalent to 5 points for spinach and garland chrysanthemum per bowel, followed by (baby) bok choy, amaranth, arden lettuce (4 points); leaf mustard, edible rape, sweet potato leaf, bai cai and Chinese leek (3 points); and okra and Chinese celery (0·5 points). This classification can be used to guide patients in recording their weekly vitamin K scores with a view to maintaining it when on warfarin. What is new and conclusion We suggest a novel approach to patient counselling on warfarin to maintain consistent dietary vitamin K intake and achieve a more stable anticoagulation response. A prospective randomized controlled trial to validate this pragmatic approach would be useful.

Purpose: We conducted a clinical study to evaluate the effects of neurotization, especially comparing the total contralateral C7 (CC7) root transfer to hemi-CC7 transfer, on total root avulsion brachial plexus injuries (BPI). Methods: Forty patients who received neurotization for BPI were enrolled in this prospective study. Group 1 (n = 20) received hemi-CC7 transfer for hand function, while group 2 (n = 20) received total-CC7 transfer. Additional neurotization included spinal accessory, phrenic, and intercostal nerve transfer for shoulder and elbow function. The results were evaluated with an average of 6 years follow-up. Results: Group 1 had fewer donor site complications (15%) than group 2 (45%); group 2 had significantly better hand M3 and M4 motor function (65%) than group 1 (30%; P = 0.02). There was no difference in sensory recovery. Significantly, better shoulder function was obtained by simultaneous neurotization on both suprascapular and axillary nerves. Conclusions: Total-CC7 transfer had better hand recovery but more donor complications than hemi-CC7. Neurotization on both supra-scapular and axillary nerves improved shoulder recovery. © 2013 The Authors. Microsurgery published by Wiley Periodicals, Inc. Microsurgery 34:91–101, 2014.

SummaryPurposeTo assess clinical outcomes and kinematic changes in bridged and adjacent segments after hybrid stabilization by interbody fusion.BackgroundConventional management for multilevel lumbar degenerative disc disease is limited to either fusion or nonfusion surgery alone. The severity of degeneration and instability in multilevel lumbar degenerative disc disease vary widely. Therefore, surgical treatment for multilevel lumbar degenerative disc disease is usually performed in a single stage by either fusion, nonfusion, or a hybrid technique. To the best of our knowledge, no kinematic study of a Dynesys fusion–nonfusion technique has yet been reported.MethodsThis study analyzed 28 patients who had undergone posterior lumbar interbody fusion with posterior dynamic stabilization fixation for spondylolisthesis with adjacent level stenosis between May 2007 and June 2008. All patients were followed up for at least 2 years. Clinical characteristics were then retrospectively reviewed. The visual analog scale (VAS) was used to score both lower limb pain and back pain. Patient functioning was evaluated using the Oswestry Disability Index (ODI).ResultsBoth VAS and ODI significantly improved during the follow-up period (p

The stress state of the carpometacarpal joint (CMJ)was studied in sound and pathologic states by methods of continuum mechanics. The CMJ geometric model was constructed according to the results of computer processing of the data of tomographic investigations in the extension position, which were obtained at Cheng Kung Medical University (Taiwan). The study of contact interactions in the CML region for a given geometry were performed numerically in the ABAQUS program code. The obtained numerical solutions of contact problems permit comparatively analyzing the stress distribution in the bone tissue for various thumb positions and study the stress state dependence on the bone tissue porosity (osteoporosis), which varies with human age.

Four new species of terrestrial earthworms belonging to the genus Amynthas were collected on the islands of Kinmen and Lieyu, Taiwan from March to November, 2008. They are Amynthas kinmenensis sp. nov. , Amynthas wuhumontis sp. nov. , Amynthas wujhouensis sp. nov. , and Amynthas taiwumontis sp. nov. Amynthas kinmenensis sp. nov. is quadrithecal and is the most abundant earthworm widely distributed on the main island of Kinmen. It has numerous small genital papillae and is closely related to Amynthas polyglandularis (Tsai, 1964) from northern Taiwan. Amynthas wuhumontis sp. nov. is sexthecal and is distributed only in areas around Mt. Wuhu and Mt. Taiwu in east Kinmen. It has male pores each surrounded by three genital papillae: one anterior, one posterior and one medial. Amynthas wujhouensis sp. nov. and Amynthas taiwumontis sp. nov. are octothecal. The former has a sporadic distribution in Kinmen while the latter was only found in areas around Mt. Taiwu. Amynthas wujhouensis sp. nov. has a pair of large genital papillae closely adjacent to the crescent or semicircular shaped male porophores in XVIII. Amynthas taiwumontis sp. nov. has simple male pore structure and no genital papillae or genital markings. DNA barcodes (the 5’ end sequences of the mitochondrial cytochrome c oxidase subunit 1 gene) from type specimens and other materials of the first three species are also reported.

Earthworms influence the biotic and abiotic characteristics of soils, but studying these effects in situ is challenging. Secondary forests in the Mid-Atlantic have abundant earthworm communities. To investigate the interaction of earthworms with the below- and aboveground part of the ecosystem, we manipulated earthworm densities in 1 m 2 enclosures located at 12 study sites within four different-aged forest stands at the Smithsonian Environmental Research Center (SERC) in Maryland, USA. The treatment plots were created by trenching around the perimeter and lining the trenches with fiberglass mesh before backfilling. Two types of untrenched plots served as control and leaf litter treatment plots. Enclosures were electroshocked between four and nine times over a two-year period to remove earthworms and to compare densities among treatment and untrenched plots. Earthworms were weighed and identified to determine whether removal by electroshocking varied depending on body size or ecological grouping. Earthworm abundances were 30–50% lower in reduced-density enclosures than in high density enclosures; however, the efficiency of the exclusion treatments varied by earthworm size and ecological group. Manipulating earthworm populations in temperate forests to assess their influence on ecological functions is feasible using electroshocking, but careful planning is essential given the amount of effort required to set up and maintain the desired experimental conditions.

Little is known regarding the interplays between the mechanical and molecular bases for vein graft restenosis. We elucidated the stenosis initiation using a high-frequency ultrasonic (HFU) echogenicity platform and estimated the endothelium yield stress from von-Mises stress computation to predict the damage locations in living rats over time. The venous-arterial transition induced the molecular cascades for autophagy and apoptosis in venous endothelial cells (ECs) to cause neointimal hyperplasia, which correlated with the high echogenicity in HFU images and the large mechanical stress that exceeded the yield strength. The ex vivo perfusion of arterial laminar shear stress to isolated veins further confirmed the correlation. EC damage can be rescued by inhibiting autophagy formation using 3-methyladenine (3-MA). Pretreatment of veins with 3-MA prior to grafting reduced the pathological increases of echogenicity and neointima formation in rats. Therefore, this platform provides non-invasive temporal spatial measurement and prediction of restenosis after venous-arterial transition as well as monitoring the progression of the treatments.

Fracture impaction is a surgical technique used to support the fractured humerus with locking plate or intramedullary nail when treating proximal humeral fractures. However, few studies have investigated the mechanical difference between fracture impaction with locking plate and with intramedullary nail. The mechanism of fracture impaction to increase stability is still unclear. The aim of this study was to use numerical methods to compare the biomechanical effect of treating proximal humeral fracture. Six different humerus models, including intact and fractured humeri with various fixation patterns were used in this study. Fracture impaction was simulated by moving the distal fragment of the humeral shift upwards directly until touching the inferior surface of the proximal fragment. We also considered both poor- and normal-quality bone in the simulation. Results confirmed that fracture impaction increases fracture stabilityand decreases peak stress in both implant and bone. Also, fracture impaction and plating with medial shift of the humeral shaft provides the highest stability. The metallic implant shared loading with the bone in the impacted models, while implants sustained all the loading alone in the nonimpacted models. Based on the results, the technique of fracture impaction is suggested for both nail and plate to reduce stresses on bone and implants and to increase structural stability. Furthermore, impaction with medial shift of the humeral shaft with plate is found to achieve the highest stability when treating proximal humeral fractures.

The study proposed a novel method for converting a radiographic guide into a surgical guide and evaluated its accuracy.Radiographic guide was reformed with the addition of index rods for geometric conversion method (GCM). Planning implants were projected on geometric projection planes, and the implant positions were measured. The radiographic guide was converted into surgical guide using a generic bench drill machine with GCM data. Two experiments were designed to validate the GCM. (1) In vitro test: Twenty implants were placed on five edentulous dental models by using the GCM (group 1) and Stereolithography (SLA) method (group 2), respectively. The deviations of planned and placed implant were calculated, and the precision error (PE) value was calculated to evaluate the stability of the GCM and SLA. (2) In vivo test: Nine edentulous subjects were selected for clinical implant surgery with the GCM guide. Two level of the index rods of radiographic guides were prepared for surgical guides forming. The differences between the planned and actual implants were calculated in implant head, apex, and angulation.The in vitro test revealed no significant differences in the planned and placed angulations between groups 1 and 2 (P.05). The PE was not significantly different between groups 1 and 2 (P.05). The in vivo test revealed a successful treatment of the subjects, and 16 implant sites were evaluated. The results indicated that GCM guide could achieve the three-dimensional (3D) offset deviations of 1.03 ± 0.27 mm and 1.17 ± 0.24 mm at the implant head and apex, respectively, and 1.37° ± 0.21° for the 3D angulation.The novel method for converting a radiographic guide into a surgical guide appears accurate and stable compared with SLA.

This study numerically investigated the deformation of titanium elastic nails prebent at various degrees during implantation into the intramedullary canal of fractured bones and the mechanism by which this prebending influenced the stability of the fractured bone. Three degrees of prebending the implanted portions of the nails were used: equal to, two times, and three times the diameter of the intramedullary canal. Furthermore, a simulated diaphyseal fracture with a 5-mm gap was created in the middle shaft portion of the bone fixed with two elastic nails in a double C-type configuration. End caps were simulated using a constraint equation. To confirm that the simulation process is able to present the mechanical response of the nail inside the intramedullary, an experiment was conducted by using sawbone for validation. The results indicated that increasing the degrees of nail prebending facilitated straightening the nails against the inner aspect of canal after implantation, with increase in stability under torsion. Furthermore, reducing nail prebending caused a larger portion of the nails to move closer to the loading site and center of bone after implantation; the use of end caps prevented the nail tips from collapsing and increased axial stability. End cap use was critical for preventing the nail tips from collapsing and for increasing the stability of the nails prebent at a degree equal to the diameter of the canal with insufficient frictional force between the nail and canal. Therefore, titanium elastic nail prebending in a double C-type configuration with a degree three times the diameter of the canal represents a superior solution for treating transverse fractures without a gap, whereas that with a degree equal to the diameter of the intramedullary canal and combined with end cap use represents an advanced solution for treating comminuted fractures in a diaphyseal long bone fracture.

The factors regulating soil animal communities are poorly understood. Current theory favors niche complementarity and facilitation over competition as the primary forms of non-trophic interspecific interaction in soil fauna; however, competition has frequently been suggested as an important community-structuring factor in earthworms, ecosystem engineers that influence belowground processes. To date, direct evidence of competition in earthworms is lacking due to the difficulty inherent in identifying a limiting resource for saprophagous animals. In the present study, we offer the first direct evidence of interspecific competition for food in this dominant soil detritivore group by combining field observations with laboratory mesocosm experiments using 13C and 15N double-enriched leaf litter to track consumption patterns. In our experiments, the Asian invasive species Amynthas hilgendorfi was a dominant competitor for leaf litter against two European species currently invading the temperate deciduous forests in North America. This competitive advantage may account for recent invasion success of A. hilgendorfi in forests with established populations of European species, and we hypothesize that specific phenological differences play an important role in determining the outcome of the belowground competition. In contrast, Eisenoides lonnbergi, a common native species in the Eastern United States, occupied a unique trophic position with limited interactions with other species, which may contribute to its persistence in habitats dominated by invasive species. Furthermore, our results supported neither the hypothesis that facilitation occurs between species of different functional groups nor the hypothesis that species in the same group exhibit functional equivalency in C and N translocation in the soil. We propose that species identity is a more powerful approach to understand earthworm invasion and its impacts on belowground processes.

Little is known regarding the interplays between the mechanical and molecular bases for vein graft restenosis. We elucidated the stenosis initiation using a high-frequency ultrasonic (HFU) echogenicity platform and estimated the endothelium yield stress from von-Mises stress computation to predict the damage locations in living rats over time. The venous-arterial transition induced the molecular cascades for autophagy and apoptosis in venous endothelial cells (ECs) to cause neointimal hyperplasia, which correlated with the high echogenicity in HFU images and the large mechanical stress that exceeded the yield strength. The ex vivo perfusion of arterial laminar shear stress to isolated veins further confirmed the correlation. EC damage can be rescued by inhibiting autophagy formation using 3-methyladenine (3-MA). Pretreatment of veins with 3-MA prior to grafting reduced the pathological increases of echogenicity and neointima formation in rats. Therefore, this platform provides non-invasive temporal spatial measurement and prediction of restenosis after venous-arterial transition as well as monitoring the progression of the treatments.

Metal injection molding (MIM) is a combination of metal powder and injection molding technology. The main advantage of this technology for material parts with small and complex shape is to manufacture cost-effective and high-volume products. The main processing steps include mixing, injection molding, debinding , sintering, and hot isostatic pressing (HIP) in order to reduce internal porosity of metals, then to improve mechanical properties. This study is based on non-destructive testing method to determine the possible defect inside the internal structure of the MIM parts. Three types of parts with and without HIP were evaluated investigated in this study. The micro computed tomography (Micro-CT) is used to scan these parts. Based the reconstructed section images from CT, the defects can be identified. It showed that with HIP the much of detects could be reduced. To conclude, Micro CT could be used to detect, in a non-destructive way, the internal detect within MIM parts can be found out in the micro-CT images, so that the manufacturing process could be modified to improve the quality of MIM parts.

Introduction The miniscrew has been developed and effectively used as orthodontic anchorage, but current studies of its usage are insufficient to provide information about the underlying mechanical mechanisms. The aim of this study was to investigate the roles of bone quality, loading conditions, screw effects, and implanted depth on the biomechanics of an orthodontic miniscrew system by using finite element analysis. Methods A 3-dimensional model with a bone block integrated with a miniscrew was constructed to simulate various cortex thicknesses, cancellous bone densities, force magnitudes and directions, screw diameters and lengths, and implanted depths of miniscrews. Results Both stress and displacement increased with decreasing cortex thickness, whereas cancellous bone density played a minor role in the mechanical response. These 2 indexes were linearly proportional to the force magnitude and produced the highest values when the force was perpendicular to the long axis of the miniscrew. A wider screw provided superior mechanical advantages. The exposed length of the miniscrew was the real factor affecting mechanical performance. Conclusions The screw diameter was the dominant factor for minscrew mechanical responses. Both bone stress and screw displacement decreased with increasing screw diameter and cortex thickness, and decreasing exposed length of the screw, force magnitude, and oblique loading direction.

The purpose of this study was to determine the correlation between the peak insertion torque value (ITV) of a dental implant and the bone-implant contact percentage (BIC%).Dental implants were inserted into specimens comprising a 2-mm-thick artificial cortical shell representing cortical bone and artificial foam bone representing cancellous bone with four densities (groups 1 to 4--0.32, 0.20, 0.16, and 0.12 g/cm(3)). Each specimen with an inserted implant was subjected to micro-computed tomography (micro-CT) scanning, from which the 3D BIC% values were calculated. Pearson's correlation coefficients (r) between the ITV and BIC% were calculated.The ITVs in groups 1 to 4 were 56.2 ± 4.6 (mean±standard deviation), 45.6 ± 0.9, 43.3 ± 4.3, and 38.5 ± 3.4 N cm, respectively, and the corresponding BIC% values were 41.5 ± 0.5%, 39.0 ± 1.0%, 30.8 ± 1.1%, and 26.2 ± 1.6%. Pearson's correlation coefficient between the ITV and BIC% was r = 0.797 (P 0.0001).The initial implant stability, quantified as the ITV, was strongly positively correlated with the 3D BIC% obtained from micro-CT images.The ITV of a dental implant can be used to predict the initial BIC%; this information may provide the clinician with important information on the optimal loading time.

Hypoxic-ischemia injury occurs after trauma causes consequential bone necrosis. Non-steroid anti-inflammatory drugs (NSAIDs) are frequently used in orthopedic clinics for pain relief. However, the underlying mechanism and outcome for usage of NSAIDs is poorly understood. To investigate the damage and loss of osteoblast function in hypoxia, two hypoxia mimetics, cobalt chloride (CoCl(2)) and desferrioxamine (DFO), were used to create an in vitro hypoxic microenvironment. The cell damage was observed by decreases of cell viability and increases in cyclooxygenase-2 and cleaved poly(ADP-ribose) polymerase (PARP). Cell apoptosis was confirmed by WST-1 cytotoxic assays and flow cytometry. The functional expression of osteoblast in alkaline phosphatase (ALP) activity was significantly decreased by CoCl(2) and inhibited when treated with DFO. To simulate the use of NSAID after hypoxic injury, four types of anti-inflammatory drugs, sulindac sulfide (SUL), indomethacin (IND), aspirin (Asp), and sodium salicylate (NaS), were applied to osteoblasts after 1 h of hypoxia mimetic treatment. SUL and IND further enhanced cell death after hypoxia. ALP activity was totally abolished in hypoxic osteoblasts under IND treatment. Facilitation of osteoblast apoptosis occurred regardless of IND dosage under hypoxic conditions. To investigate osteoblast in vivo, local hypoxia was created by fracture of tibia and then treated the injured mice with IND by oral feeding. IND-induced osteoblast apoptosis was confirmed by positive staining of TUNEL assay in fractured mice. Significant delay of fracture healing in bone tissue was also observed with the treatment of IND. These results provide information pertaining to choosing appropriate anti-inflammatory drugs for orthopedic patients.

2012 is the 10th anniversary of the publication of the first molecular phylogenetic study of earthworms by Jamieson and colleagues in 2002. Since then, a total of 29 papers on earthworm molecular phylogenetics have been published in peer-reviewed journals. However, only five of these focused on intergeneric or higher level systematics; moreover, no systematic revisions have been made. On the other hand, studies related to DNA barcoding and population genetics are flourishing, comprising more than half of published papers. In this review, we present a synthesis based on published papers of earthworm molecular phylogenetic studies, and discuss the evolutionary history and sequence characteristics that have caused the contrasting results found in the literature. We argue that multiple levels of rapid divergence in the evolutionary history of earthworms make phylogenetic reconstruction difficult. Many previous studies also suffered from using sequences that were too short and choosing genes that evolve too slowly. In response to this challenge, we recommend a strategy that involves analyzing long sequences (>2000 bp) by combining several genes with different evolutionary rates to provide enough information for different taxonomic levels, and we point out three genes (28S, 16S, and 12S rRNAs) suitable for intergeneric (within-family) analyses. Furthermore, the studies on closely related species demonstrate how molecular systematic and phylogeographic analyses have improved our understanding of earthworm speciation and intraspecific genetic variation. This knowledge about intra- and inter-specific genetic variations among closely related species provides information that can be further used for species delimitation in other earthworm groups. The numerous DNA barcoding studies have highlighted the usefulness of this technique in earthworm taxonomy, its possible applications in ecological studies, and an ongoing integrative taxonomic approach that combines morphology, DNA barcoding, and other independent data sources in species identification, discrimination and delimitation, plus new species description. Altogether, we believe that molecular phylogenetics is now on the verge of revolutionizing earthworm systematics.