Search

In this paper, a dynamic biomass gasification model was developed based on the hybrid peripheral fragmentation and shrinking-core (HPFS) model. To improve the accuracy of syngas generation transient prediction, the chemical kinetic model was trained using global surrogate optimization techniques. The pre-exponential factors of kinetic reactions are calibrated under non-catalytic conditions, employing experimental transient data of syngas generation rate and compositions under different temperatures and gasifying agents. The DYCORS and GOMORS were employed as the numerical solvers for finding the global optimum solution of the pre-exponential factors. The calibrated kinetic models based on both single-objective and multi-objective approaches have been validated by experimental data in four different biomass gasification scenarios. The calibrated kinetic model shows an over 95% decrease in terms of integrated squared error (ISE)-based model mismatch when compared to the original kinetic model.

To help minimize the negative impact of chemical fertilizers on the environment, recycle nitrogen and phosphorus nutrients of anaerobic digestate and reduce loss of nutrients via leaching, an eco-friendly slow-release fertilizer was prepared through recovery of nitrogen and phosphorus nutrition from digestate using superabsorbent fibers extracted from soybean curd residue as an adsorbent. The preparation method was proposed, and the fiber composite-based adsorbent was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and scanning electron microscope (SEM) techniques. The successful incorporation of N and P into the fiber composite-based adsorbent via adsorption was confirmed by results of these analyses. The prepared fertilizer showed a relatively high N content (3.65 wt%) and a limited P content (0.14 wt%). Also, the swelling capacity as well as water retention capability of the obtained fiber composite-based adsorbent were evaluated. The release behavior of N and P from impregnated fiber composites was examined and was found to be partially in good accordance with the standard of the Committee of European Normalization, showing good slow-release and water-retention properties. Furthermore, in order to assess the fertilizer quality of the prepared materials, the effects of different fertilizers (commercially available fertilizer and prepared slow-release fertilizer) on tomato plant growth and soil microbial communities were investigated. The obtained results demonstrated the potential of fiber composite-based slow-release fertilizer system for recycling N and P nutrition from digestate, improving the effectiveness of fertilizer as well as protecting the environment.

Granules are widely used in solid processing including chemical, mining, energy, environment, food, pharmaceutical industries. As granules are transported in pipelines, electrostatics are to be generated due to granule-wall interactions. In this work, granular surface roughness was particularly investigated for the effect on electrostatics generation for three materials including coal, woodchip and biochar for better understanding of their respective performance in well-designed granule sliding tests. In addition, other factors including granule contact area, granule shape, relative humidity as well as their integrated effects with granule surface roughness on electrostatics were considered. It was found that the electrostatics increased with larger contact area as well as decreasing humidity. In addition, triangle granules were observed to generate more electrostatic charges than rectangle granules such that granule shape was important in determining electrostatics generation. Meanwhile, it was also found that electrostatics generated first increased with granule roughness but decreased after reaching a maximum point, which was independent of granule material. In this work, the electrostatics generated by woodchip granules was obviously higher than that by biochar granules. In addition, other factors such as granule shape, surface roughness for biochar granules were showed to have less effect on electrostatics generation than that for woodchip granules.

The solar powered cooling system based on desiccant coated heat exchanger (DCHE) is an alternative to traditional vapor compression cooling system (VCCS) due to its energy-saving and eco-friendliness. To obtain improved performance, high-porosity Metal-Organic Framework (MOF) is introduced as desiccant. In our study, Cu-BTC (HKUST-1) was fabricated and certified with high purity and good crystallization by X-ray diffraction (XRD). N2 isotherm adsorption-desorption properties of MOF were investigated. Results show that MOF has co-existence of micropores and mesopores with relatively large specific surface area and pore volume. Water vapor isotherm adsorption of MOF and type B silica gel (SGB) was conducted. Isotherms indicate that moisture uptake of MOF is higher than that of SGB at low relative humidity. A dynamic mathematical model of this system was established. The solar performance was evaluated firstly. Results suggest that solar collector can provide 52.5–80.4 °C hot water from 9:00 to 19:00. Then the simulation was conducted under American Air-conditioning and Refrigeration Institute (ARI) summer and Shanghai August conditions. Results exhibit that MOF coated heat exchanger (MCHE) has more significant enhancement of dehumidification performance than SGB coated heat exchanger (SCHE) with increased regeneration temperature and MCHE is more suitable for application under ARI summer condition.

A novel biomass gasification-based combined cooling, heat and power (CCHP) system, which is composed of a gas-fueled internal combustion engine, variable-effect LiBr-H2O absorption cooling, and dehumidification air-conditioning with desiccant coated heat exchangers, was introduced. The temperature and humidity independent strategy was applied in the gasification-based CCHP system to enhance cooling production, in which the variable-effect absorption chiller and desiccant dehumidification air-conditioning were driven by the exhaust heat and jacket heat of the gas engine based on energy cascade, respectively. The operation strategy of the system followed the electric load. Validated by experimental data, a zero-dimensional code of the gasifier with Gibbs free energy minimization, an artificial neural network model of the variable-effect absorption chiller, and a 1-D dynamic model of the dehumidification air-conditioning, were built with reasonable deviations. The results of energetic, economic, and environmental (3E) analyses for the proposed gasification-based CCHP systems that were applied in two different buildings indicate that woody chips are the most favorable feedstock under the climate of Singapore. The total performance is more sensitive to the feedstock cost than to the natural gas cost. This work enables to contribute valuable data to the practical application of the biomass gasification-based CCHP system in Singapore's building sector.

To tackle the increasing global energy demand the climate change problem, the integration of renewable energy and negative emission technologies is a promising solution. In this work, a novel concept called “negative emission hybrid renewable energy system” is proposed for the first time. It is a hybrid solar-wind-biomass renewable energy system with biochar production, which could potentially provide energy generation, carbon sequestration, and waste treatment services within one system. The optimization and the conflicting economic and environmental trade-off of such system has not yet been fully investigated in the literature. To fill the research gap, this paper aims to propose a stochastic multi-objective decision-support framework to identify optimal design of the energy mix and discuss the economic and environmental feasibilities of a negative emission hybrid renewable energy system. This approach maximizes energy output and minimizes greenhouse gas emissions by the optimal sizing of the solar, wind, combustion, gasification, pyrolysis, and energy storage components in the system. A case study on Carabao Island in the Philippines, which is representative of an island-mode energy system, is conducted based on the aim of achieving net-zero emission for the whole island. For the island with a population of 10,881 people and an area of 22.05 km2, the proposed optimal system have significant negative emission capability and promising profitability with a carbon sequestration potential of 2795 kg CO2-eq/day and a predicted daily profit of 455 US$/day.

Surface-modified poly( d , l -lactic-co-glycolic acid) PLGA nanoparticles (NPs) were fabricated via nanoprecipitation for obtaining therapeutic concentration of paclitaxel (PTX) in brain tumor. The cellular uptake and cytotoxicity of NPs were evaluated on C6 glioma cells in vitro, and BALB/c mice were used to study the brain penetration and biodistribution upon intravenous administration. Results showed that by finely tuning nanoprecipitation parameters, PLGA NPs coated with surfactants with a size around 150 nm could provide a sustained release of PTX for >2 weeks. Surface coatings could increase cellular uptake efficiency when compared with noncoated NPs, and d -α-tocopherol polyethylene glycol 1000 succinate (TPGS) showed the most significant enhancement. The in vivo evaluation of TPGS-PLGA NPs showed amplified accumulation (>800% after 96 h) of PTX in the brain tissue when compared with bare NPs and Taxol®. Therefore, PLGA-NPs with PLGA-TPGS coating demonstrate a promising approach to efficiently transport PTX across blood-brain barrier in a safer manner, with the advantages of easy formulation, lower production cost, and higher encapsulation efficiency.

Bio-heavy oil (BHO), a crude mixture of fatty acids (FAs) and mono-, di-, and triglycerides unavoidably generated as waste during biodiesel production processes, is an alternative replacement of petro-heavy oil as a fuel for power generation. It is reported for the first time that upgrading the quality of raw BHO (lowering the acid value (AV) of BHO) can be achieved via a low-pressure non-catalytic esterification process. Esterification of the FAs contained in raw BHO on solid acid catalysts (tungsten trioxide and niobium pentoxide) were investigated by comparison with the non-catalytic method. The AV of raw BHO can be successfully reduced from 116 to ∼38 in 2 h under a low pressure (0.1 bar) via the non-catalytic esterification process. Catalytic esterification with Nb2O5 or WO3 showed similar performance to the non-catalytic esterification. It can be suggested a possibility to make a high-quality renewable fuel (e.g., BHO with a low acid value) for power generation from inexpensive feedstock.

Rapid depletion of fossil fuel and CO2 mitigation are two major challenges in the modern society. CO2 gasification of carbon-neutral biomass could be an attractive technology to cope up these two emerging problems. Replacing conventional gasifying agent air with CO2 could reduce the fraction of undesired N2 in the gas products because CO2 behaves as inert gasifying agent under low temperature and could be converted to CO at high temperature range. However, most researches on CO2 gasification are limited at the lab-scale level due to the endothermic feature of Boudouard reaction. In this work, a feasibility study of small-scale autothermal gasification using 15% CO2 and 85% air was conducted and compared with traditional air gasification. Prior to that, a lab-scale study of gasification behaviors, under N2, air and CO2 agents, were performed. It was found that using CO2 as gasification oxidant could produce comparable energy (6.67 kJ/g feedstock) to air gasification (7.45 kJ/g feedstock) at equivalent condition (800 °C, 40 min). The pH of biochar obtained under CO2 condition at 800 °C was measured to be 10.63 while the pH of biochar derived by air gasification at the same temperature could reach 12.32. In addition, a small-scale gasification experiment with 15% CO2 addition was successfully conducted in a downdraft autothermal reactor. The results showed CO production was greatly enhanced while CH4 generation was suppressed owing to Boudouard reaction and CO2 dry reforming. Cold gas efficiency and carbon conversion efficiency were both enhanced by 5.8% and 6%, respectively, with CO2 addition. Meanwhile, particulate matters (PM) emitted from both air gasification and 15% CO2 gasification experiments were measured. It was found that under the same equivalence ratio (ER), 75.4% less particle number concentration was emitted during 15% CO2 gasification compared to air gasification.

Compared to pyrolysis biochar (PBC), gasification biochar (GBC) differs in both composition and surface functionalities due to the use of an oxidizing purging gas. This work compares the effect of using PBC and GBC as soil amendments on the soil properties, trace metal bioavailability, soil microbial activity, and soil dissolved organic matter (DOM). Biochar-driven reduction of bioavailable metals does not necessarily result in a positive impact on the soil microbial growth. The DOM in the soil was strongly related to the soil microbial activity, as revealed by the strong correlation between the soil dehydrogenase activity (DHA) and soil dissolved organic carbon (r = 0.957, p 0.01). Three identified fluorescent components (C1, C2, C3) in the soil DOM were closely associated with the soil microbial activity, for instance, with a clear positive correlation between the soil DHA and C1 (r = 0.718, p 0.05) and a significant negative correlation between the total bacterial fatty acid methyl ester content and C3 (r = -0.768, p 0.05). The bioavailability of Cd and Zn is not only related to the pH and surface functionalities of the biochar, but also to its aromatic carbon and inorganic mineral composition. This study further demonstrates that a fluorescence excitation-emission matrix coupled with parallel factor analysis is a useful tool to monitor changes in the soil quality after application of biochar, which is greatly relevant to the soil biota.

This study assessed the developmental toxicities of water-soluble carbon black wastes (CBW) extract (1:5, w/v) in zebrafish embryos (Danio rerio). Acute embryonic toxicity was performed following OECD guideline 236. Analysis using ICP-OES revealed that nickel (Ni) and vanadium (V) were predominant in CBW. Embryos exposed to CBW exhibited developmental delay, along with pericardial and yolk sac edemas. Malformed heart chambers were found in the CBW-exposed embryos and heart rates were significantly reduced since 48 h post fertilization (hpf). After RT-qPCR analysis, two cardiac forming-related genes, amhc and nppa responsible for atrial cardiac myofibril assembly and cardiac muscle cell proliferation, were up-regulated after 96 hpf. The increased mortality and delayed yolk-sac development appeared related to CBW-induced decrease in pH to about 5.5. Individual treatments of Ni and V did not cause identical toxic effects as CBW showed. At 100 ppm, V had a pH of approximately 5.5, causing developmental delay and pericardial edema in zebrafish embryos. At the same pH, combined Ni and V induced morphological anomalies and reduced heart rates similar to CBW-exposed embryos. Conclusively, this study demonstrates that environmental runoff is a serious concern, and thus, CBW incineration bottom ash should be treated carefully before disposal in landfills.

A biomass gasification based combined cooling, heat and power (CCHP) system, with an internal combustion engine (ICE), a variable-effect LiBr-H2O absorption chiller (VEAC), and a dehumidification air-conditioning with desiccant coated heat exchangers (DDAC), was evaluated for its performance in energy supply to a representative data center located in Singapore. The VEAC and DDAC were driven by the exhaust heat and jacket heat of the gas ICE, respectively. The operation strategy follows the electric load. Validated by experimental data, a 0-D code of the gasifier with Gibbs free energy minimization, an artificial neural network model of the VEAC, and a 1-D dynamic model of the DDAC, were built via considering reasonable deviation. In terms of the performance criterion, the energy supply and demand, and techno-economic of the system were evaluated. This work enables to contribute valuable data to the limited research on the biomass gasification-based CCHP application in Singapore’s building sector.

Online measurements of key information such as the decomposition stages of biomass gasification/pyrolysis in a fixed-bed reactor is currently limited with existing technologies. In this study a proof of concept for using Electrical Capacitance Tomography (ECT) for monitoring the decomposition stages of woody biomass is done. In practice, ECT measures the permittivity of the material under test. Therefore, the relation between the permittivity of the biomass in terms of the extent of thermal treatment is essential. Pyrolysis and gasification experiments were conducted to different extent of time and temperatures at a lab scale gasifier using wood chips. The permittivity of the samples was measured in-vitro using impedance analyzer at different excitation frequencies (20 kHz to 3 MHz). At a critical pyrolysis temperature of 700 °C the permittivity starts to increase significantly. In addition, for air-aided gasification the permittivity was found to reach its maximum in holding time of 10 or 30 min. Further examination of these samples in an ECT sensor revealed the same trend, implying that the permittivity results can be used for converting ECT reading to decomposition state. Chemical characterizations were done via elemental, thermogravimetry analysis, X-ray diffraction and Fourier transform infrared (FTIR) Spectroscopy. It was found that graphitization of the material is a prominent factor that control the increase of the permittivity. Analyzing quantitatively the aromatic and aliphatic carbon from the FTIR results disclose that it has a strong relation to the permittivity change when the aromatic carbon is higher than 95%. Therefore, in this range, it was possible to correlate these two parameters by an inverse relation which lead to a good match under frequencies higher than 200 kHz.

In this work, we firstly examined the technical feasibility of geopolymer synthesis from the coal fly ash with high iron oxide (48.84 wt.%) and calcium oxide (22.15 wt.%) contents. The heat resistance of geopolymer was represented by the dry weight loss which ranged from 2.5 to 4.9% and was better than that (11.7%) of OPC. However, the high iron oxide content made the acid resistance (13–14%) of geopolymer inferior to OPC. The economics of geopolymer production changes significantly upon the variation in the arrangement of material use and geopolymer price. The costs of Na2SiO3 and NaOH and the benefit of geopolymer selling were the major factors affecting the economic feasibility of geopolymer production. When the Na2SiO3 price was around 400 USD/ton, the geopolymer production will be profitable even if the geopolymer price was as low as 50 USD/ton. It is possible to improve the economics of geopolymer production by varying the arrangement of material use while not impairing the performance of geopolymer.

A granular composite sorbent (LC-CF) was synthesized from acid-leached carbon waste using chitosan and FeCl3, and its feasibility for nitrate and phosphate removal was investigated in this study. The sorption data was well described by the pseudo-second-order kinetic model, and the maximum sorption capacity of LC-CF predicted by Langmuir model for nitrate and phosphate were 41.90 mg g−1 and 62.72 mg g−1, respectively. In comparison, LC-CF had a greater affinity for phosphate and exhibited a better reusability for nitrate removal during the sorption-desorption cycles. Ion exchange, electrostatic interaction, and hydrogen bond are the potential sorption mechanisms. In light of the cost-benefit analysis, the proposed treatment of carbon waste was more economically feasible as compared with existing incineration scheme. These results illuminated that synthesis of granular sorbent with carbon waste could achieve the harmless disposal of hazardous industrial waste as well as the production of value-added sorbent for water treatments.

The concentric-tube internal loop airlift reactor is a typical reactor configuration which has been adopted for a myriad of chemical and biological processes. The reactor hydrodynamics (including mixing) and the mass transfer between the gas and liquid phases remarkably affect the operational conditions and thus are crucial to the overall reactor performance. Hence, this study aims at providing a thorough description of the basic concepts and a comprehensive review of the relevant reported studies on the hydrodynamics and mass transfer of the concentric-tube internal loop airlift reactors, taking microalgae cultivation as an exemplary application. In particular, the reactor characteristics, geometry, CFD modeling, experimental characterization, and scale up considerations are elucidated. The research gaps for future research and development are also identified.

Both biochar supplementation as well as bioaugmentation have been shown in literature to improve the methane yield of anaerobic digestion. In this study, the combination of both are evaluated by growing Methanosarcina thermophila on biochar support particles prior to augmentation of thermophilic food waste anaerobic digestion. Biochar stand alone, bioaugmentation solely, a combination of both added separately or grown together, and utilizing polypropylene (PP) microplastics as growth support instead were all tested when starting up a thermophilic process from mesophilic inoculum. Methanosarcina thermophila and biochar supplementation displayed synergy, with 5% M. thermophila on 1 g/L biochar presenting a 32% increase in specific methane yield over the control. Double the bioaugmentation dosage/concentration was also trialled with a thermophilic inoculum, and 10% M. thermophila grown on 2 g/L biochar displayed the best results with a 20% increase specific methane yield from its control standard.

In recent times, 3D printing has been gaining traction as a fabrication platform for customizable drug dosages as a form of personalized medicine. While this has been recently demonstrated as oral dosages, there is potential to provide the same customizability and personalization as topical applications for wound healing. In this paper, the application of 3D printing to fabricate hydrogel wound dressings with customizable architectures and drug dosages was investigated. Chitosan methacrylate was synthesized and mixed with Lidocaine Hydrochloride and Levofloxacin respectively along with a photoinitiator before being used to print wound dressings of various designs. These designs were then investigated for their effect on drug release rates and profiles. Our results show the ability of 3D printing to customize drug dosages and drug release rates through co-loading different drugs at various positions and varying the thickness of drug-free layers over drug-loaded layers in the wound dressing respectively. Two scale-up approaches were also investigated for their effects on drug release rates from the wound dressing. The influence that each wound dressing design has on the release profile of drugs was also shown by fitting them with drug release kinetic models. This study thus shows the feasibility of utilizing 3D printing to fabricate wound dressings with customizable shapes, drug dosage and drug release rates that can be tuned according to the patient's requirements.

Anaerobic digestion produces large quantities of digestate as a by-product, which can potentially be applied as an organic fertilizer, but untreated anaerobic digestate (AD) may contain phytotoxins and the large volume of AD makes transportation and storage difficult. This study explored two relatively inexpensive processing methods to improve the agronomic performance of AD as a fertilizer via vegetable cultivation experiments. We first investigated the effect of dilution on AD’s performance using four leafy vegetables (Chinese spinach, water spinach, Chinese cabbage and lettuce). The optimal concentrations of the AD were 20–40% (v/v in 250 mL applications per single-plant pot) for all four vegetables based on shoot fresh weight and comparable to the control treatment using commercial fertilizer. AD application also introduced Synergistetes bacteria into the growing medium, but the overall bacterial diversity and composition were similar to those of the control treatment. Considering the nutrient separation in the liquid and solid fractions of AD and the need to reduce the volume, we then experimented with the recovery of nutrients from both the liquid and solid fractions by filtering AD using two types of wood-based biochar (100 g biochar: 1 L AD) before applying the AD-biochar residues as side dressing at 1% (w/w). Both types of biochar achieved yields comparable to the treatment using a commercial fertilizer for the three vegetables tested (kale, lettuce and rocket salad). Our results show that dilution and biochar filtration can improve the agronomic performance of AD, making it a sustainable substitute for commercial fertilizer.

The remediation of oil spills and treatment of oily wastewater remains challenging to cope with nowadays. This has caused a surge in demand on adsorbent materials with multi-functionalities to effectively separate oils and nonpolar solvents from water. A superhydrophobic composite aerogel prepared from industrial waste-derived leached carbon black waste (LCBW) and polyvinyl alcohol (PVA) was developed in this work via conventional freeze-casting followed by surface coating. The composite aerogel was ultralight and porous with porosity >85% and tunable density ranging between 0.015 and 0.065 g/cm3. It was found that the embedded LCBW in the PVA network is crucial to impart superhydrophobicity and superoleophilicity to the aerogel as it enhances the surface roughness. Wettability test showed that composite aerogel prepared from 0.5 wt% PVA at PVA/LCBW ratio of 1 exhibited the highest water contact angle (156.7 ± 2.9°). LCBW also improved the thermal stability of the composite aerogel. With its superior selectivity, PVA/LCBW aerogel was used as selective adsorbent for a variety of oils and organic solvents. The adsorption test showed that the composite aerogel exhibited an adsorption capacity up to 35 times its original weight and could be reused repeatedly and easily recovered through a simple drying method.

In recent years, combination therapy has emerged as the cornerstone of clinical practice in treating glioblastoma multiforme. However, their ability to trigger and leverage the body's adaptive immunity has rarely been studied. Tumour heterogeneity, the presence of the blood-brain barrier, and an immunosuppressive tumor microenvironment play a crucial role in the 90% local tumor recurrence post-treatment. Herein, we report an improved combination therapy approach capable of stimulating an immune response that utilizes Light responsive antigen-capturing oxygen generators (LAGs). The engineered LAGs loaded with a non-genotoxic molecule, Nutlin-3a, and a photosensitizer, Protoporphyrin IX, can release the payload on-demand when exposed to light of a specific wavelength. The in-situ oxygen generation capability of LAGs enables tumor oxygenation enhancement, thereby alleviating the tumor hypoxia and enhancing the efficacy of chemo-photodynamic therapy. Furthermore, by modulating the surface properties of LAGs, we demonstrated that the tumor-derived protein antigens released can be captured and retained in-situ, which improves antigen uptake and presentation by the antigen-presenting cells. Dual drug-loaded LAGs (DD-LAGs) upregulated the expression of cell surface CD83 maturation and CD86 costimulatory markers on monocyte-derived-dendritic cells, suggesting intrinsic immune adjuvancy. In the presence of 3D printed hypoxic U87 spheroids (h-U87), DD-LAGs induced cancer cell death, upregulated IL-1β, and downregulated IL-10 resulting in CD3+, helper CD4+, and cytotoxic CD8+ proliferation. Finally, we have investigated convection-enhanced delivery as a potential route of administration for DD-LAGs. Our work presents a novel strategy to induce tumor cell death both during and post-treatment, thereby reducing the possibility of recurrence.

Incineration is the main technology used for the management of municipal solid waste, in parallel to various recycling programs. However, incineration should not be considered as the final step for waste management as the ash still needs to be treated and disposed properly. In this work, an innovative accelerated carbonation of incineration bottom ash (IBA) using simulated biogas composition from anaerobic digestion processes (a mixture of CH

A wood waste-derived biochar was applied to food-waste anaerobic digestion to evaluate the feasibility of its utilisation to create a circular economy. This biochar was first purposed for the upgrading of the biogas from the said anaerobic digestion, before treating and recovering the nutrients in the solid fraction of the digestate, which was finally employed as a biofertilizer for the organic cultivation of three green leafy vegetables: kale, lettuce and rocket salad. Whilst the amount of CO2 the biochar could absorb from the biogas was low (11.17 mg g−1), it could potentially be increased by modifying through physical and chemical methods. Virgin as well as CO2-laden biochar were able to remove around 31% of chemical oxygen demand, 8% of the ammonia and almost 90% of the total suspended solids from the digestate wastewater, which was better than a dewatering process via centrifugation but worse than the industry standard of a polytetrafluoroethylene membrane bioreactor. Nutrients were recovered in the solid fraction of the digestate residue filtered by the biochar, and utilised as a biofertilizer that performed similarly to a commercial complete fertilizer in terms of aerial fresh weight growth for all three vegetables cultivated. Contingent on the optimal upgrading of biogas, the concept of a circular economy based on biochar and anaerobic digestion appears to be feasible.

Organic waste, the predominant component of global solid waste, has never been higher, resulting in increased landfilling, incineration, and open dumping that releases greenhouse gases and toxins that contribute to global warming and environmental pollution. The need to create and adopt sustainable closed-loop systems for waste reduction and valorization is critical. Using organic waste as a feedstock, gasification and pyrolysis systems can produce biooil, syngas, and thermal energy, while reducing waste mass by as much as 85-95% through conversion into biochar, a valuable byproduct with myriad uses from soil conditioning to bioremediation and carbon sequestration. Here, we present a novel case study detailing the circular economy of gasification biochar in Singapore's Gardens by the Bay. Biochar produced from horticultural waste within the Gardens was tested as a partial peat moss substitute in growing lettuce, pak choi, and pansy, and found to be a viable substitute for peat moss. At low percentages of 20-30% gasification biochar, fresh weight yields for lettuce and pak choi were comparable to or exceeded those of plants grown in pure peat moss. The biochar was also analyzed as a potential additive to concrete, with a 2% biochar mortar compound found to be of suitable strength for non-structural functions, such as sidewalks, ditches, and other civil applications. These results demonstrate the global potential of circular economies based on local biochar creation and on-site use through the valorization of horticultural waste via gasification, generating clean, renewable heat or electricity, and producing a carbon-neutral to -negative byproduct in the form of biochar. They also indicate the potential of scaled-up pyrolysis or gasification systems for a circular economy in waste management.

Incinerated sewage sludge ash is tested here as a cement and aggregate substitute in mortar blocks. It can be used at various percentages to reduce the overall cost of production and promote ash recycling. The compressive strength of the cast blocks was tested at 28 days to determine the optimal combination of ball milled ash (replacing cement) and sewage sludge ash (replacing sand). This was compared with a control block made of cement and sand only. The cast blocks with the optimal ash formulation were tested for their flexural strength and other properties such as surface functional groups, constituent phases and porosity. The control and ash mortars exhibited similar properties. A potential application of these blocks is to use them as part of seawalls. These blocks were thus suspended in the sea for 6 months. Marine organism attachment was observed over time in both control and ash mortar blocks. There was no significant difference between the mortars after 6 months. The mortar blocks were also subjected to leaching tests (NEN-7345). The leachates did not exhibit toxicity to microalgae. In contrast, mild toxicity was observed in the sea urchin embryo development assay. Overall, the study suggests that sewage sludge ash is a potential material to be used for seawall construction as it has the desirable mechanical properties. However, there remain some residual marine toxicity concerns that need to be further addressed.

Biochar as a biomass derived, low cost, carbon conductive material is considered as an important supplement in the anaerobic digestion (AD) of organic matter. It functions as an electrical grid to ...

Nano-biochar application was investigated for anaerobic digestion of orange peel waste. The application for methane production focused on the optimization of biochar feedstock, rescue of failed digesters, and microbial succession analysis. It showed that sewage sludge (SS) derived biochar had the highest performance enhancement among the different feedstocks, which could be ascribed to the improvement of electron transfer, interspecies hydrogen transfer, and supply of trace elements. Subsequently, nano SS biochar-amended digestate was evaluated for rescuing failed digesters, and the experimental results indicated its positive roles through gradual bioaugmentation operation. The dynamic analysis of microbial succession indicated the successful application was through the mechanism of restoring partially the functional microbial communities. The major reconstruction of functional microorganisms included bacteria phyla Hydrogenispora (24.5%) and Defluviitoga (18.8%) as well as methanogenic genera of Methanosarcina (41.5%) and Methanobacterium (27.3%). These findings would contribute to rescuing failed anaerobic digesters by bioaugmentation with biochar-amended digestate.

Reforming of methane to produce synthesis gas for the Fischer–Tropsch process provides an alternative to fossil fuels. Silica-encaged ceria–nickel hydroxide catalysts were produced by an in situ synthesis method to obtain ultrafine bimetallic species dispersed evenly within the mesoporous silica matrix. Dry reforming and reduction-oxidation cycling was undertaken with the materials. Catalysts with high content of nickel showed good activity during dry reforming, with conversions rates close to equilibrium in equimolar conditions. Insignificant deactivation of the catalysts was observed over 5 h and 50 h of reaction at 900 °C. Syngas production via reduction–oxidation cycling was shown to be insignificant as compared to continuous catalytic reforming.

This review is focused on the sustainable management of harvested water hyacinth (WH) via thermochemical conversion to carbonaceous materials (CMs), biofuels, and chemicals for energy and environmental applications. One of the major challenges in thermochemical conversion is to guarantee the phytoremediation performance of biochar and the energy conversion efficiency in biowaste-to-energy processes. Thus, a circular sustainable approach is proposed to improve the biochar and energy production. The co-conversion process can enhance the syngas, heat, and energy productions with high-quality products. The produced biochar should be economically feasible and comparable to available commercial carbon products. The removal and control of heavy and transition metals are essential for the safe implementation and management of WH biochar. CMs derived from biochar are of interest in wastewater treatment, air purification, and construction. It is important to control the size, shape, and chemical compositions of the CM particles for higher-value products like catalyst, adsorbent or conductor.

Fly ash represents a kind of finely divided solid waste which is derived from industrial or municipal waste incineration and contains various metal elements. In this work, we focus on the waste-to-resource conversion of one fly ash which is generated from the incineration of petroleum coke gasification waste. The leaching behaviors and waste conversion of this fly ash to value-added products under different treatments were investigated. The majority of the identified elements in leachate demonstrated different leaching patterns as the species of leached element from fly ashes depend on the chemical properties of leaching agents. Moreover, A pathway is developed to harvest toxic vanadium from this fly ash, and the vanadium-containing leachate can be further converted into electrolyte for vanadium redox flow battery (VRFB). The vanadium electrolyte was synthesized by using fly ash leachate as the resource materials in two different ways afterwards: reducing vanadium in the leachate directly (electrolyte from leachate) and synthesizing V2O5 from leachate as the intermediate product (electrolyte from leachate-derived V2O5). The electrochemical behavior and performance of these electrolytes were analyzed to investigate the feasibility of these approaches. The measurement of electrochemical performance proves that the electrolyte from leachate-derived V2O5 is comparable to the standard electrolyte in terms of columbic efficiency (CE), energy efficiency (EE) and stability. Based on experimental results, our research provides a potential solution for the establishment of vanadium flow battery plant. Cost-benefit analysis proves that the payback period of electrolyte synthesized from alkaline leachate and leachate-derived V2O5 is 2.1 years and 1.0 year, respectively.

Biochar, produced as a by-product of pyrolysis/gasification of waste biomass, shows great potential to reduce the environment impact, address the climate change issue, and establish a circular economy model. Despite the promising outlook, the research on the benefits of biochar remains highly debated. This has been attributed to the heterogeneity of biochar itself, with its inherent physical, chemical and biological properties highly influenced by production variables such as feedstock types and treating conditions. Hence, to enable meaningful comparison of results, establishment of an agreed international standard to govern the production of biochar for specific uses is necessary. In this study, we analyzed four key uses of biochar: 1) in agriculture and horticulture, 2) as construction material, 3) as activated carbon, and 4) in anaerobic digestion. Then the guidelines for the properties of biochar, especially for the concentrations of toxic heavy metals, for its environmental friendly application were proposed in the context of Singapore. The international status of the biochar industry code of practice, feedback from Singapore local industry and government agencies, as well as future perspectives for the biochar industry were explained.

The occurrence of emerging organic contaminants (EOCs) such as chemicals in personal care products, pharmaceuticals, plasticizers, etc. in surface waters is a growing global concern. The discharge of most EOCs is not regulated, and EOCs have been shown to be toxic to both human and aquatic life even at low concentrations. In this work, acid-leached carbon black waste (LCBW), a carbonaceous residue from petroleum refineries, was investigated as a potential waste-derived adsorbent for the removal of EOCs. Ciprofloxacin hydrochloride, (CIPRO, antibiotic), sulfamethoxazole (SULFA, antibiotic), acetaminophen (ACET, pharmaceutical), bisphenol A (BPA, plasticizer) and N,N-diethyl-3-methylbenzamide (DEET, insect repellent) were chosen as the target EOCs owing to their presence in relatively high concentrations in surface waters as well as in the influent and effluent of wastewater treatment plants. LCBW, with a specific surface area of 409 m2/g, demonstrated 90–99% removal of 10 ppm CIPRO, BPA, and ACET and 70–80% removal of 10 ppm SULFA and DEET in tap water. Adsorption was rapid, particularly for CIPRO, BPA, and ACET, wherein >85% of the adsorption occurred within 1 h of contact time. To illustrate the potential of LCBW as an adsorbent in different physical forms, ∼3 mm spherical beads of LCBW encapsulated within carboxymethyl cellulose matrix were prepared by a facile ionic gelation method and their adsorption performance was demonstrated.

A CO

As global warming and climate change become perceived as significant, the release of greenhouse gases (GHGs) stored in the earth's polar regions is considered a matter of concern. Here, we focused on exploiting GHGs to address potential global warming challenges in the north polar regions. In particular, we used CO

In this study, the looping materials of Fe

Light irradiation is considered an ideal non-invasive stimulus that enables precise tumour treatment with flexible, facile, and spatiotemporal control. Photodynamic therapy (PDT) is an important clinically relevant therapeutic modality that has proven to compensate for the reduced therapeutic efficacy of conventional chemotherapy. However, oxygen consumption during PDT can result in an inadequate oxygen supply which reduces photodynamic efficacy. In our quest to circumvent the limitations of chemotherapy and photodynamic therapy, we have engineered a robust and smart "all-in-one" nanoparticle-based drug delivery system capable of overcoming biological barriers and leveraging on several synergistic cancer cell killing mechanisms. The fabricated Targeted Micellar Nanoprobe (TMNP) had exceptionally high encapsulation efficiencies of a hydrophobic drug simvastatin (SV) and a photosensitizer protoporphyrin IX (PpIX) due to the ℼ-ℼ stacking of the aromatic groups of SV and PpIX and strong hydrophobic interactions with the alkyl chains of the carrier. In-vitro results demonstrated that TMNP exhibited excellent colloidal stability, biocompatibility and drug retaining capability in physiological condition. Under light irradiation, TMNP causes the accelerated generation of reactive oxygen species (ROS) which subsequently damages the mitochondria. On further evaluation of the mechanisms behind the superior anti-cancer effect of TMNP, we concluded that TMNP causes synergistic apoptosis and necrosis along with cell cycle arrest at the G1-S phase and elicits anti-angiogenic effects. Taking into consideration that these promising results on 2D monolayer cell cultures might not translate into similar results in animal models, we developed 3D multicellular tumour spheroids (MCs) as an intermediate step to bridge the gap between 2-D cell experiments and in-vivo studies. TMNPs showed enhanced penetration and growth inhibition on MCs. In addition, the modelling of the transport of TMNP in the tumour exhibited the improved effective delivery volume. Overall, TMNPs could potentially be used for image-guided delivery of the therapeutic payloads for precise cancer treatment.