Search

Aims The Coronal Plane Alignment of the Knee (CPAK) classification is a simple and comprehensive system for predicting pre-arthritic knee alignment. However, when the CPAK classification is applied in the Asian population, which is characterized by more varus and wider distribution in lower limb alignment, modifications in the boundaries of arithmetic hip-knee-ankle angle (aHKA) and joint line obliquity (JLO) should be considered. The purposes of this study were as follows: first, to propose a modified CPAK classification based on the actual joint line obliquity (aJLO) and wider range of aHKA in the Asian population; second, to test this classification in a cohort of Asians with healthy knees; third, to propose individualized alignment targets for different CPAK types in kinematically aligned (KA) total knee arthroplasty (TKA). Methods The CPAK classification was modified by changing the neutral boundaries of aHKA to 0° ± 3° and using aJLO as a new variable. Radiological analysis of 214 healthy knees in 214 Asian individuals was used to assess the distribution and mean value of alignment angles of each phenotype among different classifications based on the coronal plane. Individualized alignment targets were set according to the mean lateral distal femoral angle (LDFA) and medial proximal tibial angle (MPTA) of different knee types. Results A very high concentration, 191 from 214 individuals (89.3%), were found in knee types with apex distal JLO when the CPAK classification was applied in the Asian population. By using aJLO as a new variable, the high distribution percentage in knee types with apex distal JLO decreased to 125 from 214 individuals (58.4%). The most common types in order were Type II (n = 70; 32.7%), Type V (n = 55; 25.7%), and Type I (n = 46; 21.5%) in the modified CPAK classification. Conclusion The modified CPAK classification corrected the uneven distribution when applying the CPAK classification in the Asian population. Setting individualized TKA alignment targets according to CPAK type may be a practical method to recreate optimal LDFA and MPTA in KA-TKA. Cite this article: Bone Jt Open 2022;3(3):211–217.

Abstract Background For oblique metacarpal shaft fracture, if anatomical reduction is achieved through conservative cast immobilization rather than stable fixation, bone malrotation can easily occur, resulting in severe loss in hand prehensile function. However, whether bone plate fixation or only lag screw fixation is more preferable remains unclear. Few studies have evaluated whether screw fixation can provide biomechanical fixation strength similar to bone plate fixation. Objective We assessed the difference in fixation strength between fixtation with two lag screws and bone plate for oblique metacarpal shaft fractures. Materials and methods We created oblique metacarpal shaft fractures on 21 artificial bones and fixated them using (1) double lag screw (2LS group), (2) regular plate (RP group), or (3) locked plate (LP group). To obtain the force–displacement data, a cantilever bending test was conducted for each specimen through a material testing machine. One-way analysis of variance and a Tukey test were conducted to compare the maximum fracture force and stiffness of the three fixation methods. Results The maximum fracture force of the 2LS group (mean + SD: 153.6 ± 26.5 N) was significantly lower than that of the RP (211.6 ± 18.5 N) and LP (227.5 ± 10.0 N) groups (p

Abstract Background Metacarpal shaft fractures are a common hand trauma. The current surgical fixation options for such fractures include percutaneous Kirschner wire pinning and nonlocking and locking plate fixation. Although bone plate fixation, compared with Kirschner wire pinning, has superior fixation ability, a consensus has not been reached on whether the bone plate is better placed on the dorsal or lateral side. Objective The purpose of this study was to evaluate the fixation of locking and regular bone plates on the dorsal and lateral sides of a metacarpal shaft fracture. Materials and methods Thirty-five artificial metacarpal bones were used in the experiment. Metacarpal shaft fractures were created using a saw blade, which were then treated with four types of fixation as follows: (1) a locking plate with four locking bicortical screws on the dorsal side (LP_D); (2) a locking plate with four locking bicortical screws on the lateral side (LP_L); (3) a regular plate with four regular bicortical screws on the dorsal side (RP_D); (4) a regular plate with four regular bicortical screws on the lateral side (RP_D); and (5) two K-wires (KWs). All specimens were tested through cantilever bending tests on a material testing system. The maximum fracture force and stiffness of the five fixation types were determined based on the force–displacement data. The maximum fracture force and stiffness of the specimens with metacarpal shaft fractures were first analyzed using one-way analysis of variance and Tukey’s test. Results The maximum fracture force results of the five types of metacarpal shaft fracture were as follows: LP_D group (230.1 ± 22.8 N, mean ± SD) ≅ RP_D group (228.2 ± 13.4 N) > KW group (94.0 ± 17.4 N) > LP_L group (59.0 ± 7.9 N) ≅ RP_L group (44.5 ± 3.4 N). In addition, the stiffness results of the five types of metacarpal shaft fracture were as follows: LP_D group (68.7 ± 14.0 N/mm) > RP_D group (54.9 ± 3.2 N/mm) > KW group (20.7 ± 5.8 N/mm) ≅ LP_L group (10.6 ± 1.7 N/mm) ≅ RP_L group (9.4 ± 1.2 N/mm). Conclusion According to our results, the mechanical strength offered by lateral plate fixation of a metacarpal shaft fracture is so low that even KW fixation can offer relatively superior mechanical strength; this is regardless of whether a locking or nonlocking plate is used for lateral plate fixation. Such fixation can reduce the probability of extensor tendon adhesion. Nevertheless, our results indicated that when lateral plate fixation is used for fixating a metacarpal shaft fracture in a clinical setting, whether the mechanical strength offered by such fixation would be strong enough to support bone union remains questionable.

Abstract Background Electroacupuncture (EA) alleviates chronic pain and acute postoperative pain after several surgical procedures. However, whether EA facilitates postoperative functional recovery after arthroscopic surgery has yet to be determined. This study investigated the short-term effect of EA on a rehabilitation course after arthroscopic triangular fibrocartilage complex (TFCC) repair. Methods Forty-two patients undergoing arthroscopic TFCC repair were randomised to an EA group (n = 19) or control group (n = 23). In the EA group, patients received EA treatment and standard active rehabilitation for 4 weeks. In the control group, patients received standard active rehabilitation for 4 weeks. At the end of the treatment and at the follow-up visit 4 weeks after the treatment, Disabilities of the Arm, Shoulder, and Hand (DASH) scores, wrist range of motion (ROM), handgrip strength, and key pinch strength were collected and analysed. Results The EA group improved significantly than the control group in terms of DASH scores, all wrist motion arcs, and key pinch strength (P < 0.05) at the end of the 4-week treatment and the follow-up visit another 4 weeks later. Conclusion Patients treated with 4 weeks of EA after the arthroscopic TFCC repair had better wrist ROM and DASH scores than patients of control group

Abstract Background Surgical treatment is necessary for scaphoid nonunion. Open surgery with a combined volar and dorsal approach is thought to have poor functional outcomes and a prolonged recovery course. However, the detailed recovery course for this approach is rarely reported. The aim of this study was to investigate the recovery course and radiographic outcome for patients with scaphoid nonunion who underwent a combined volar bone grafting and dorsal antegrade headless screw approach. Material and methods Eighteen patients with scaphoid nonunion who underwent combined volar bone grafting and dorsal antegrade headless screw fixation were enrolled in this retrospective study. Preoperative and serial postoperative wrist functional and radiographic outcomes were collected and analysed. Results All 18 patients achieved bone union at a mean time of 14.3 weeks. Compared to the preoperative status, the grip strength, wrist motion arc, and Mayo Wrist score were improved significantly 6 months after surgery, whilst the Disabilities of the Arm, Shoulder, and Hand (DASH) score did not recover until 12 months after surgery. Significant improvements were found in all scaphoid radiographic parameters. Conclusion The surgical outcomes for scaphoid nonunion treated with a combined volar bone grafting and dorsal antegrade headless screw achieved a high union rate, with great wrist functional and radiographic outcomes. The earliest recovered wrist functional parameters were grip strength, motion arc, Mayo Wrist score and finally the DASH score at postoperative 6 months and 12 months, respectively.

By the request of the Minister of Health and Welfare, NHRI Biobank was assigned to establish a COVID-19 biobank in early Feb, 2020 to collect COVID-19 patients’ blood samples for Taiwan researchers and industries in an emergent way. It was set up in less than 3 weeks and quickly opened for application. By August 5, 2020, this COVID-19 biobank has collected 165 blood samples of 110 patients from more than 10 hospitals across north, middle and south part of Taiwan, including both COVID-19 (+) and (-) pneumonia patients. This biobank can provide applicants with biosamples, such as serum, DNA and RNA, and also the clinical and genomic data, so as to accelerate the COVID-19 treatment and prevention research in Taiwan. This COID-19 biobank already received 15 applications. It has become the most important research resource for the COVID-19 pandemic in Taiwan, including new screening reagents, disease mechanism, the variable human responses and epidemic preventions. Since it is publicly available for both academic and industrial applicants.

ObjectiveIn individuals with epiglottitis, chronic obstructive pulmonary disease (COPD) is a common comorbidity; however, the impact of COPD under such circumstances is not well documented. Therefore, we performed this population-based study to determine whether, in adults, COPD is a risk factor for epiglottitis.MethodsIn this retrospective matched-cohort study, data obtained from the Taiwan National Health Insurance Research Database were analyzed. We identified all patients newly diagnosed as having COPD in 2000-2011 and performed frequency matching and propensity-score matching for every patient with COPD individually to another patient without a COPD diagnosis. We used epiglottitis occurrence as the study endpoint, and we investigated the hazard ratio of epiglottitis by using the Cox proportional hazards model after adjustment for potential confounders.ResultsIn the frequency matching, the cumulative epiglottitis incidence was significantly higher (p = 0.005) in the COPD cohort. According to the adjusted Cox proportional hazard model, COPD exhibited a significant association with elevated epiglottitis incidence (adjusted hazard ratio: 1.76; 95% confidence interval: 1.15-2.70, p = 0.009). Similar trend was observed in the propensity-score matching analysis (adjusted hazard ratio: 1.50; 95% confidence interval: 0.99-2.29, p = 0.057). Our subgroup analysis revealed COPD to be an epiglottitis risk factor in male patients and those aged 40-64 years.ConclusionsThis is the first nationwide matched-cohort research to examine the association of COPD with epiglottitis. Our results revealed that COPD may be a potential risk factor for epiglottitis; thus, clinicians should be mindful of the potential increased risk of epiglottitis following COPD.