Search

This work demonstrates a novel method for rapid determination of total solid content in viscous liquid (polymer-enriched) samples. The method is based multiple headspace extraction gas chromatography (MHE-GC) on a headspace vial at a temperature above boiling point of water. Thus, the trend of water loss from the tested liquid due to evaporation can be followed. With the limited MHE-GC testing (e.g., 5 extractions) and a one-point calibration procedure (i.e., recording the weight difference before and after analysis), the total amount of water in the sample can be determined, from which the total solid contents in the liquid can be calculated. A number of black liquors were analyzed by the new method which yielded results that closely matched those of the reference method; i.e., the results of these two methods differed by no more than 2.3%. Compared with the reference method, the MHE-GC method is much simpler and more practical. Therefore, it is suitable for the rapid determination of the solid content in many polymer-containing liquid samples., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Objective: To investigate the inhibitive effect and the underlying mechanism of Xiaoji Decoction (, XJD) in human lung cancer A549 cells., Methods: A549 cells in logarithmic proliferation were cultivated in RPMI-1640 containing 10% low, medium or high dosages of XJD serum. The inhibitive effect of XJD in A549 cell proliferation was assessed by methylthiazolyldiphenyl-tetrazolium bromide (MTT) assay. The pro-apoptotic effect of XJD in A549 cells was observed by fluorescence microscope via Hoechst 33258 staining. The role of the Akt signaling pathway was observed by examining the presence of p-Akt protein by Western blot and the mRNA expression of downstream proteins such as Bcl-2/Bcl-XL-associated death promoter (BAD) and caspase-9 by real time polymerase chain reaction., Results: MTT assay revealed that XJD could inhibit A549 proliferation in a dose- and time-dependent manner. Hoechst 33258 staining showed that XJD induced the typical nuclear apoptotic morphology after XJD treatment. Moreover, XJD could reduce the phosphorylation of Akt and increase the mRNA expression of BAD and caspase-9., Conclusions: XJD can inhibit the proliferation of A549 cells in a dose- and time-dependent manner through signaling Akt pathway via up-regulating the expression of BAD and caspase-9. XJD may provide a novel therapeutic model for lung cancer and deserve further study.

Ultra-thin flexible glass with high transparency is attractive for a broad range of display applications; however, substrates with low optical haze are not ideal for thin film solar cells, since most of the light will go through the semiconductor layer without scattering, and the length of light travelling path in the active layer is small. By simply depositing a layer of TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-oxidized wood fibers (TOWFs), we are able to tailor the optical properties of flexible glass dramatically from exhibiting low haze (<1%) to high haze (~56%) without compromising the total forward transmittance (~90%). The influence of the TOWFs morphology on the optical properties of TOWFs-coated flexible glass is investigated. As the average fiber length decreases, the transmission haze of TOWF-coated flexible glass illustrates a decreasing trend. Earth-abundant natural materials for transparent, hazy, and flexible glass have tremendous applicability in the fabrication of flexible optoelectronics with tunable light scattering effects by enabling inexpensive and large-scale processes.

This study reports on a rapid method for the determination of methanol in paper-based materials by alkaline extraction, coupled with headspace analysis. Methanol partition equilibria between solid-liquid phases and vapor-liquid phases were conducted in two separate containers, from which an equation for calculating the total methanol content in the original paper sample was derived. It was found that the extraction equilibrium of methanol from solid sample could be achieved within 5min at room temperature using a high-speed disintegrator, and a subsequent neutralization step is an effective way to prevent methanol from being regenerated at high temperature during headspace equilibration. The results showed that the relative standard deviations for reproducibility tests were in the range of 1.86-6.03%, and the recoveries were in the range of 92.3-107%. The present method is simple and practical; it can be an efficient tool for quantifying the methanol content in paper-based materials and thus play an important role in the investigation of methanol migration behavior in food and beverage packaging., (Copyright © 2014 Elsevier B.V. All rights reserved.)

This paper reports on the development of a new headspace analytical technique that is based on water removal by hydrate formation (WRHF). By adding anhydrous salt, the liquid water in an aqueous sample will be removed leaving behind volatile analytes that are fully vaporized at temperatures well below their boiling points. With WRHF, the amount of sample in the headspace can be significantly increased, thereby dramatically improving the detection sensitivity. The technique reduces the risk of possible column damage in gas chromatography (GC) systems. The technique was applied to the determination of phenol at different stages of a coking wastewater treatment plant. The results showed that up to mL-levels of sample solution can be used in WRHF HS-GC analysis when 5g of CaCl2 were used as the anhydrous salt. The detection sensitivity for phenol content was 500 times greater than that in earlier HS-GC work that did not incorporate hydrate formation. The proposed WRHF headspace analysis technique is simple and practical, making it a useful tool for quantifying low concentrations of volatile analytes in aqueous samples., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Purpose: To evaluate the clinical efficacy of letrozole on ovulation induction and hormone replacement therapy (HRT) during endometrial preparation for frozen-thawed embryo transfer (FET)., Methods: We analyzed totally 1,230 cycles of patients that underwent FET from October 2010 to September 2012. Seven hundred and thirteen cycles of patients with ovulation disorders that underwent FET were randomly assigned to two groups by case control study. 359 cycles received letrozole ovulation induction and 354 cycles received HRT during endometrial preparation for FET, respectively. In the corresponding period, 517 cycles of patients with normal ovulation in the natural cycle group for FET endometrial preparation served as controls. Reproduction-related clinical outcomes of patients in the three groups were compared., Results: The embryo implantation rate of patients in letrozole group (30.4 %) was significantly higher than the HRT group (22.8 %, P < 0.05). The clinical pregnancy rate of patients in the letrozole group (53.2 %) was significantly higher than the HRT group (44.4 %, P < 0.05), while no significant difference was observed between the letrozole and natural cycle groups (51.3 %, P > 0.05). Estradiol levels on the day of human chorionic gonadotropin administration in the letrozole group were significantly lower than those in the natural cycle group (280.32 ± 125.39 pg/ml and 351.06 ± 123.03 pg/ml, respectively; P < 0.05). The live birth rate of patients in letrozole group (44.6 %) was significantly higher than the HRT group (32.5 %, P < 0.05), while abortion rate (12.0 %) was significantly lower than the HRT group (21.0 %, P < 0.05). There were no significant differences in number of mature follicles, endometrial thickness, duration of follicle growth between the letrozole and the natural cycle groups, and there were no significant differences in twin birth rate and ectopic pregnancy rate among the three groups (all P values >0.05)., Conclusions: Ovulation induction with letrozole during endometrial preparation for FET has a higher rate of pregnancy success and a lower abortion rate than HRT. Letrozole treatment exhibits clinical progression and outcomes similar to those patients undergoing a natural cycle or normal ovulation cycle. Therefore, letrozole treatment may be an effective option in endometrial preparation for FET in patients with ovulation disorders or irregular menstruation.

In this paper, we present a novel method for determining the maximal amount of ethane, a minor gas species, adsorbed in a shale sample. The method is based on the time-dependent release of ethane from shale samples measured by headspace gas chromatography (HS-GC). The study includes a mathematical model for fitting the experimental data, calculating the maximal amount gas adsorbed, and predicting results at other temperatures. The method is a more efficient alternative to the isothermal adsorption method that is in widespread use today., (Copyright © 2013 Elsevier B.V. All rights reserved.)

This work demonstrates a novel method for the determination of viscosity in the concentrated black liquors from pulp mill recovery process. The method is based on the kinetic release of methanol (a vapor tracer) to the headspace in a sample closed vial by a multiple headspace extraction gas chromatographic technique. Both theoretical and empirical models were proposed for establishing the correlation with the reference method. The results showed that the correlation using either of the models is excellent for the tested black liquor samples (at 110°C). The presented method is simple and practical and can be a valuable tool for black liquor viscosity related research and applications., (Copyright © 2013 Elsevier B.V. All rights reserved.)

A novel method has been developed for the determination of adsorption partition coefficient (Kd) of minor gases in shale. The method uses samples of two different sizes (masses) of the same material, from which the partition coefficient of the gas can be determined from two independent headspace gas chromatographic (HS-GC) measurements. The equilibrium for the model gas (ethane) was achieved in 5h at 120°C. The method also involves establishing an equation based on the Kd at higher equilibrium temperature, from which the Kd at lower temperature can be calculated. Although the HS-GC method requires some time and effort, it is simpler and quicker than the isothermal adsorption method that is in widespread use today. As a result, the method is simple and practical and can be a valuable tool for shale gas-related research and applications., (Copyright © 2013 Elsevier B.V. All rights reserved.)

This study reports on a method for determination of methanol in paper products by headspace gas chromatography (HS-GC). The method is based on the hydrolysis of the pulp or paper matrix, using a phosphoric acid solution (42.5%) as the medium at 120 °C in 5 h (excluding air contact) in order to release matrix-entrapped methanol, which is then determined by HS-GC. Data show that, under the given conditions of hydrolysis, no methanol was formed from the methoxyl groups in the material. Reproducibility tests of the method generated a relative standard deviation of <3.5%, with recovery in the range of 93.4-102%. The present method is reliable, accurate, and suitable for use in batch testing of the methanol content in paper-related materials. The method can play an important role in addressing food safety concerns that may be raised regarding the use of paper materials in food and beverage packaging.

A headspace gas chromatographic method (HS-GC) has been developed for the determination of biological oxygen demand (BOD) in the water samples from domestic wastewater treatment plants. The method is based on measuring the remaining oxygen in the headspace of the sample (that has been seeded with microorganisms) in a closed container after a period of incubation. The relative standard deviation of the method in replicate testing was <4.9%. Further, the results differed by less than 6% when compared with the widely used reference method (the ISO standard) for determining BOD5. The limit of quantification in BODn testing was about 1.8 mg/L. The new method is simple and suitable for use in the batch sample testing for BODn measurement., (Copyright © 2013 Elsevier B.V. All rights reserved.)

The present paper described a triple-wavelength visible spectroscopic method for the determination of iron content in lignocellulosic materials. After the sample was pretreated with acidic hydrolysis method under selected conditions, the color agent, 1, 10-phenanthroline monohydrate, was added in the filtrate and then measured by a triple-wavelength spectroscopic method at wavelengths of 416, 510 and 700 nm, from which the iron contents of the sample can be calculated. The results showed that this method can efficiently deduct the influences of acidic soluble lignin and furfural compounds generated during the sample pretreatment and baseline drift caused by the tiny particles in the filtrates. It not only has a good measurement precision but also is accurate, in which the relative differences of the results obtained by the present method and ICP-OES method is less than 5%. The method is simple and practical, and suitable for industrial applications.

The present paper reports a novel method for the determination of silicon content in straw fibrous material black liquor based on alpha-Si--Mo heteropoly acid spectrophotometry. The selected conditions were as follows: detection wavelength 360 nm, pH 4.0, and reaction time 10 min. It was found that the acidic soluble lignin in the sample liquor was the major interference species in the silicon content determination. The interference of acidic soluble lignin can be eliminated by hydrogen peroxide-nitric acid digestion method. The present method is not only simple, rapid, stable and less interferential, but also of good measurement precision and accuracy, with the relative standard deviations of 0.9%, and recoveries of 99.0%-102%. It is suitable for use in high silicon content of black liquor routine rapid analyses.

The paper reports on a headspace gas chromatographic (HS-GC) method for the determination of methoxyl in lignin. The method involves the quantitive cleavage of methoxyl with hydroiodic acid (HI) to form methyl iodide in a closed headspace sample vial at 130 °C for 30 min. After HI has been added, the sample is neutralized by injecting a sodium hydroxide solution; the methyl iodide in the vial was determined by HS-GC using a flame ionization detector. The results showed that the method has an excellent measurement precision (RSD < 0.69%) and accuracy (RSD < 3.5%) for the quantification of methoxyl content in lignin. The present method is simple and accurate and can be used for the efficient determination of methoxy1 content in lignin and related materials.

This paper describes a novel multiple-headspace extraction/gas chromatographic (MHE-GC) technique for monitoring monomer conversion during a polymerization reaction in a water-based emulsion environment. The polymerization reaction of methyl methacrylate (MMA) in an aqueous emulsion is used as an example. The reaction was performed in a closed headspace sample vial (as a mini-reactor), with pentane as a tracer. In situ monitoring of the vapor concentration of the tracer, employing a multiple headspace extraction (sampling) scheme, coupled to a GC, makes it possible to quantitatively follow the conversion of MMA during the early stages of polymerization. Data on the integrated amount of the tracer vapor released from the monomer droplet phase during the polymerization is described by a mathematic equation from which the monomer conversion can be calculated. The present method is simple, automated and economical, and provides an efficient tool in the investigation of the reaction kinetics and effects of the reaction conditions on the early stage of polymerization., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A headspace gas chromatographic (HS-GC) method has been developed for the determination of residual hydrogen peroxide in pulp bleaching effluents. The method is based on the reaction of hydrogen peroxide and permanganate in an acidic medium (0.1 mol/L), in which hydrogen peroxide is quantitatively converted to oxygen within 10 min at 60°C in a sealed headspace sample vial. The released oxygen is then determined by GC equipped with a thermal conductivity detector. The method is robust, sensitive, and accurate, with reproducibility characterized by a relative standard deviation of <0.5%, a sensitivity whose limit of quantification (LOQ) is 0.96 μmol, and a demonstrated recovery ranging from 98 to 103%. Further, the method is simple, rapid, and automated., (Copyright © 2012 Elsevier B.V. All rights reserved.)

This paper reports on a headspace gas chromatographic method (HS-GC) for rapid determination of degree of substitution in succinic anhydride (SA) modified celluloses. The method is based on the reaction between the carboxyl groups in SA modified cellulose and bicarbonate solution in a closed headspace sample vial. The CO(2) released from the reaction was measured by HS-GC. The completion of the reaction was achieved within 25 min at 80 °C when a small sample size (<20 mg) was used. The relative standard deviation (RSD) measurement of precision was less than 4.1%, and the results were within 8.0% of those obtained with the traditional titration for determining the degree of substitution. The present method is simple, practical, automated, and suitable for use in anhydride modified cellulose research., (Copyright © 2012 Elsevier B.V. All rights reserved.)

A hybrid organic-inorganic material based on vermiculite was prepared to remove diethyl phthalate (DEP) from aqueous solution. Natural vermiculite was activated with HCl to improve the specific surface area and was then modified by silanization using trimethylchlorosilane. Organovermiculite prepared by ion exchange with hexadecyl trimethylammonium bromide (HDTMAB) was also tested for comparison. The leaching of 2 mol L(-1) HCl at 80°C increased the specific surface area of vermiculite from 14.4 to 500.0m(2)g(-1), and the average pore-diameter was decreased from 7.90 nm to 2.75 nm. Fourier transform infrared spectroscopy (FTIR) spectra indicated that trimethysilyl groups were grafted covalently on the surface of acid vermiculites. The specific surface area of trimethylchlorosilane-modified acid vermiculites (TMAVs) (355.4 m(2) g(-1)) was much larger than that of organovermiculite (6.0 m(2) g(-1)). The isotherm adsorption experiments of DEP showed that TMAVs exhibited linear isotherms, suggesting that the uptake of DEP was controlled by partitioning mechanism. The maximal partition coefficient (K(d)) of TMAVs was 3.1 times higher than that of organovermiculite, implying that TMAVs had stronger organic affinity than organovermiculite. The results demonstrate that the adsorption capacity and mechanism of organoclays were controlled by the specific surface area and organic loading, whereas the length of alkyl chain of organic modifier was not the key factor., (Copyright © 2011 Elsevier Inc. All rights reserved.)

This paper reports on a desiccated full evaporation headspace gas chromatographic (FE HS-GC) technique for determination of the methanol content in dilute mill effluents. Anhydrous K(2)CO(3) was selected as the preferred salt for eliminating the water in the sample in the headspace sample vial. The results showed that the addition of 12 g K(2)CO(3) made it possible to introduce a larger sample size (up to 1 mL) into the FE HS-GC measurement, thereby increasing the sensitivity of the technique. At the given equilibration temperature (105°C), a near-complete mass transfer of methanol from the liquid phase to vapor phase (headspace) was achieved within 10 min. Replicate samples showed that the relative standard deviation of the method was less than 1.5%. Further, the limit of quantification (LOQ) was 0.12 μg and the recovery ranged from 95 to 104%. The present method greatly improves the methanol detection sensitivity in the FE HS-GC method and has the added advantage of being simple, rapid and accurate., (Copyright © 2011 Elsevier B.V. All rights reserved.)

This study reports on a headspace gas chromatographic method (HS-GC) for the determination of formaldehyde in sanitary napkin samples. The method is based on the reaction of formaldehyde and sodium borohydride in a concentrated potassium carbonate solution (824 g/L), in which formaldehyde is quantitatively converted to methanol at 105°C in 45 min. The methanol from the conversion is determined by HS-GC. The repeatability of the method had a relative standard deviation of less than 4.5%; the limit of quantification (LOQ) was 1.17 µg, and the recovery ranged from 96.8 - 106%. The present method is simple, rapid, and accurate. It is suitable for use in the batch testing for product quality control of tissue papers during the manufacturing process and in analysis of point-of-sale samples from commercial markets.

Objective: To evaluate the influence of Shenfu Injection (SHF) on the quality of life of patients with advanced non-small cell lung cancer (NSCLC) receiving chemotherapy., Methods: A total of 133 patients with NSCLC receiving at least two cycles of chemotherapy with taxol plus cisplatin (TP)/vinorelbine plus cisplatin (NP) or gemcitabine plus cisplatin (GP) were randomized into SHF pre-treatment group (with SHF given only in the first cycle) and SHF post-treatment group (with SHF given only in the second cycle). The Quality of Life Questionnaire-Core 30 (QLQ-C30) and the Functional Living Index-Cancer (FLIC) were used to evaluate the quality of life of the patients after the treatments., Results: Both of the groups showed improved quality of life after the treatments (P<0.01), but the improvements were more obvious in SHF pre-treatment group (P<0.05). SHF showed favorable effects in relieving such adverse effects as fatigue, nausea, vomiting and diarrhea associated with the chemotherapy., Conclusion: SHF can improve the quality of life in NSCLC patients receiving chemotherapies.

This study demonstrates a headspace gas chromatographic(HS-GC) technique for the determination of residual epichlorohydrin (ECH) and generated 1,3-dichloro-2-propanol (DCP) in synthesis process of 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHTAC). By a weight-based sampling method, coupled with significant dilution in 15.8% sodium sulfate and 0.1% silver nitrate mixed solution rapidly, the sample for HS-GC analysis is prepared. Based on the reaction stoichiometry, the conversion (R) of CHTAC during the synthesis process can be calculated from sampling weight and GC peak area. The results showed that the method has a good measurement precision (RSD<2.5%) and accuracy (recovery=101-104%) for the quantification of both ECH and DCP in the process samples. The present method is simple and accurate, which can be used for the efficient determination of the CHTAC conversion in the synthesis research., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The present paper reports a dual wavelength spectroscopic method for the determination of chemical oxygen demand (COD) of low content samples, based on the absorption measurement at 440 and 560 nm. Since the absorptivities of Cr3+ at these two wavelengths are the same, a net absorption from dichromate ions can be determined by subtracting the absorption at 560 nm (only contributed by Cr3+) from the absorption at 440 nm The results showed that the detection limit of quantification is 8.6 mg x L(-1) and the relative standard deviations are in the 2%-15% range for the low COD standard samples (< or = 100 mg x L(-1)) in this proposed method. Further more, the method does not require calibration based on the standard samples. The present method is simple, reliable, and accurate; it is suitable for the application in a mass testing for low COD samples.

This study demonstrated two in situ UV-vis spectrophotometric methods for rapid and temporally resolved measurements of cellulase adsorption onto cellulosic and lignocellulosic substrates during enzymatic hydrolysis. The cellulase protein absorption peak at 280 nm was used for quantification. The spectral interferences from light scattering by small fibers (fines) and particulates and from absorptions by lignin leached from lignocelluloses were corrected using a dual-wavelength technique. Wavelengths of 500 and 255 nm were used as secondary wavelengths for correcting spectral interferences from light scattering and absorption of leached lignin. Spectral interferences can also be eliminated by taking the second derivative of the measured spectra of enzymatic hydrolysate of cellulose or lignocelluloses. The in situ measured cellulase adsorptions in cellulose and lignocellulose suspensions by these two spectrophotometric methods showed general agreement with batch sampling assayed by the Bradford method. The in situ methods not only eliminated tedious batch sampling but also can resolve the kinetics of the initial adsorption process. The measured time-dependent cellulase adsorptions were found to follow pseudo-second-order kinetics.

This paper reports a full evaporation (FE) headspace gas chromatographic (HS-GC) method for rapid determination of furfural in the biomass hydrolysate. The data show that a near-complete mass transfer of furfural in the sample from biomass hydrolysate to the vapor phase (headspace) was achieved within 3 min at 105°C when a very small (<40 μL) sample was added to a 20 mL headspace sample vial. The acid-catalyzed furfural decomposition under these conditions was negligible. The furfural in the vapor phase was then determined by HS-GC using a flame ionization detector. The results showed that the method has an excellent measurement precision (RSD<0.5%) and accuracy (recovery=100.2±1.7%) for furfural quantification in carbohydrate hydrolysate samples. The method requires no sample pretreatment, so it is simple, rapid and accurate, and suitable for applications in lignocellulosic biomass conversion to fuel ethanol or other high value-added products., (Copyright © 2010 Elsevier B.V. All rights reserved.)

The traditional Douglas colorimetric method (phloroglucinol - glacial acetic acid colorimetry) could only be used to measure all forms of five-carbon sugars, including mono-, oligo- and poly- saccharides. Relative improvement is done on this method to achieve simultaneous determination of pentosan, hexosan and their monosaccharides, by the dual-wavelength method. Results indicate that 425 nm is the equal molar absorption wavelength of pentose and hexose, while 553 nm is the maximum absorption wavelength of pentoses. So the calculating formula has been greatly simplified based on the absorbance at 425 and 553 nm. The research results of interfering substances in the extraction liquor show that the lignin and glucuronic acid has no significant influence on the determination of pentoses or hexoses. It is concluded that this improved method has high precision and accuracy, and its recovery range is from 97.4% to 101.9%. Therefore, as a simple and rapid method, it is quite appropriate for measuring mixed sugars of pentoses and hexoses in the extraction liquor from hardwood or gra minaceous plant.

The present paper reports a rapid method for the determination of furfural (F) and 5-hydroxymethyl furfural (HMF) in pre-extraction liquors of lignocellulosic biomass based on UV spectroscopy. In a concentrated acetic acid medium, F and HMF have an isosbestic point at 276 nm. It was found that the acidic soluble lignin in the pre-extraction sample is the major interference species in the F and HMF spectroscopic quantification However, only acidic soluble lignins have the absorption at the wavelengths above 325 nm. Based on the absorption of the acidic soluble lignins at 325 nm, their absorptions at either F or HMF absorbed wavelengths can be determined. Thus, with a simple triple-wavelength technique, both F and HMF in the pre-extraction liquors of lignocellulosic biomass can be quantified based on the spectroscopic measurement at the isosbestic point wavelength (276 nm), maximum absorption wavelength of F (272 nm) and the acid soluble lignin absorbed wavelength (325 nm). The present method does not require the hazardous organic compounds (such as phenolic compounds etc.) acting as a color reagent in the experiment. It is not only simple and rapid, but also has a good measurement precision and accuracy, with the relative standard deviations of 3.02% and 2.72%, and recoveries of 95%-107% and 96%-101%, respectively, in the F and HMF quantification. The present method is suitable for use in the research on pre-extraction hemicellulose of the lignocellulosic biomass in bio-refinery area in order to achieve a high selective sugar conversion.

This paper reports a full evaporation (FE) headspace gas chromatographic (GC) method for rapid determination of ethanol in fermentation liquor. The data show that ethanol in the fermentation liquor was transferred to the vapor phase (headspace) almost completely within 3 min at a temperature of 105 degrees C when a very small volume (< 50 microL) of sample was directly added to a sealed headspace sample vial (20 mL). The ethanol in the vapor phase was then measured by headspace GC using a flame ionization detector. The results show that the present method has an excellent measurement precision (RSD=1.62%) and accuracy (recovery=98.1 (+/-1.76%)) for the ethanol quantification in fermentation liquors. The method requires no sample pretreatment and is very simple and rapid.

Objective: To observe the effect of Shenfu Injection (SFI) for attenuating the toxicity of chemotherapy in treating non-small-cell lung cancer (NSCLC), by the regimens of combined Cisplatin (DDP) with new chemotherapeutic agents, Taxol (TXT), Vinorelbine (NVB) and Gemcitabine (GEM), respectively., Methods: One hundred and thirty-three patients with NSCLC, who were scheduled to be treated by at least 2 cycles of chemotherapy, with regimen TP (45 cases), NP (42 cases) and GP (46 cases), were enrolled. They were randomized into 2 groups: 67 cases in the SFI pre-treated group and 66 cases in the SFI post-treated group, on them SFI was administered for 10 successive days on the 1st, 2nd, 3rd day of the 1st and the 2nd cycle, respectively. The effects of SFI on toxicity of the three regimens were observed through a self-controlled crossover design., Results: The hemato-toxicity (the toxicity on leukocyte, neutrophil, hemoglobin and platelet) and the digestive toxicity (represented as vomiting, constipation or diarrhea) of chemotherapy revealed in the treated stage (the cycle treated with SFI) were all less than those in the control stage (the cycle untreated with SFI), no matter when SFI was applied, all showed statistical significance (P < 0.05 or P < 0.01). Besides, SFI showed a better toxicity attenuating effect on patients of qi-deficiency and phlegm-dampness type (P < 0.01)., Conclusion: SFI can relieve the hemato-toxicity and the digestive toxicity of chemotherapy by regimen of combining DDP with TXT, NVB or GEM, and the effect is more significant on patients of qi-deficiency and phlegm-dampness type.

This paper demonstrated an in situ headspace gas chromatography (GC) technique for monitoring bacterial growth using a commercial GC system with a multiple headspace extraction (sampling) mode. The technique was based on measuring the carbon dioxide mass in the headspace of a closed sample vial during the bacteria growth. A mathematic equation was derived in order to calculate the integrated amount of carbon dioxide produced by bacterial growth during the incubation. The method can be used to monitor the bacterial growth rate in a given cultural medium. The present method is very simple, sensitive, and safe.

This study demonstrated a headspace gas chromatographic method (HS-GC) for the determination of oxalate content in black liquor (alkaline aqueous solution of inorganic chemicals and dissolved wood species from the alkaline pulping of wood). The method described in this paper is based on the reaction between oxalic and manganese dioxide in an acidic medium, in which oxalic acid is converted to carbon dioxide that is measured with a GC using a thermal conductivity detector. The challenge in developing this method was ensuring complete conversion of oxalic acid while minimizing the contribution of side reactions between carbohydrates, lignin and manganese dioxide to the carbon dioxide measured. It was found that a complete conversion of oxalate to carbon dioxide can be achieved within 3 min at a temperature of 70 degrees C; a MnO(2):C(oxalate) (concentration of H(2)C(2)O(4)+HC(2)O(4)(-)+C(2)O(4)(2-)) mole ratio of 60 and H(2)SO(4) concentration of 0.005-0.01 mol/L in the headspace vial. The method can detect concentrations as low as 0.39 microg of oxalate. The standard deviation was found to be 7% while recovery experiments with black liquor showed recoveries of 93-108% which were deemed acceptable for analysis of oxalate in an industrial sample such as black liquor.

This paper reported a full evaporation headspace gas chromatographic (GC) technique for determination of methanol content in black liquors (pulping spent liquor). In this method, a very small volume (10-20 microL) of liquor sample is introduced into a headspace sample vial (20 mL) and heated up to a temperature of 105 degrees C. A near-complete mass transfer of methanol from the liquid phase to vapor phase (headspace), i.e., a full evaporation, can be achieved within 3 min. The methanol in the headspace of the vial is then measured by GC. The present method is simple, rapid and accurate.

This paper reports a corrosion problem in the headspace sampling needle when using a phase reaction conversion headspace gas chromatographic method in Agilent headspace auto-sampler. The examination by microscopy shows that corrosion mainly takes place on the surface of the outer wall of the needle that is exposed to the air during each headspace sampling. Since it was proven that the helium flushing is effective in minimizing the pit type of corrosion on the stainless needle material, a custom-made surface flushing device was proposed for corrosion inhibition.

A series of one-stage oxygen delignification treatments with a softwood (SW) kraft pulp were studied employing 0.0-0.5% of a bismuth ruthenium pyrochlore oxide catalyst. The results demonstrated that a 0.09-0.18% charge of catalyst in an oxygen stage provided a 52.2-116.0% increase of carboxylic acid groups in the cellulosic component of kraft pulps without a significant decrease in fiber viscosity. A 3-factor at 3-level (L(9)3(3)) orthogonal experimental design was used to identify the main factors influencing acid group formation in pulp carbohydrates. The relative significance of experimental parameters for polysaccharide acid group formation was the molar equivalent NaOH, oxygen pressure, and finally, reaction temperature under the experimental conditions studied. The optimized reaction parameters for fiber charge development were shown to be 85-100 degrees C, 2.5% NaOH, and 800-960 kPa oxygen pressure. Pulps with higher fiber carboxylic acid content introduced by catalytic oxidation during oxygen delignification yielded a 10.9-33.7% increase in fiber charge after elemental chlorine free (ECF) pulp bleaching. The enhanced fiber charge resulted in 6.7-17.1% increase in paper sheet tensile index at comparable pulp viscosity.

A novel headspace gas chromatographic (HS-GC) method is demonstrated for an indirect determination of oxalate in oxygen delignification liquors. A small volume (50-100 microL) of liquor sample is introduced into a sampling vial that contains 1.0 mL of 2 mol/L sulfuric acid. After removal of carbon dioxide (generated from carbonate in the acidic medium) by heating, the sample was mixed with a 0.5 mL of 0.02 mol/L potassium permanganate solution in a closed testing vial. At an elevated temperature (70 degrees C), the oxalate in the sample is rapidly converted to carbon dioxide by reacting with permanganate. The carbon dioxide in the headspace can be measured by gas chromatography with a thermal conductive detector. Using a multiple headspace extraction (MHE) measurement technique, the kinetics of formation of the carbon dioxide from the other organic species in the sample can be determined, and thus a correction can be made for minimizing the interferences. The present method is simple, accurate and can be easily automated.

This study proposed a novel headspace gas chromatographic (HS-GC) method for determination of adhesive contaminants (microstickies) in recycled whitewater, a fiber containing process stream, in the paper mill. It is based on the adsorption behavior of toluene (as a tracer) on the hydrophobic surface of microstickies, which affects the apparent vapor-liquid equilibration partitioning of toluene. It was found that the equilibrium concentration of toluene in the vapor phase is inversely proportional to the apparent effective surface area of microstickies that remain in the corresponding solution. Thus, the amount of microsticky materials in the recycled whitewater can be quantified by HS-GC via indirect measurement of the toluene content in the vapor phase of the sample without any pretreatment. The presented method is simple, rapid and automated.

Objective: To observe the effect of Shenfu injection (SFI) in treating non small cell lung cancer (NSCLC) patients on quality of life with gemcitabine (GEM) plus cisplatin (GP) regimen., Methods: Thirty-four patients were ready to receive GP regimen chemotherapy for treating NSCLC disease, according to lot-drawing, they were divided into SFI pre-treatment group (18 cases) and SFI post-treatment group (16 cases). SFI pre-treatment group: During the first treatment course, chemotherapy was begun with SFI 60 ml, intravenous dripping on the 3rd day, once daily, consecutively for 10 days; on the 1st day, GP regimen (GEM 1250 mg/m(2), intravenous dripping, on the 1st and 8th day; cisplatin 70 mg/m(2) on the 2nd day; 21 days as one cycle) was carried out; in the second treatment course GP regimen was merely given to serve as the self-control. SFI post-treatment group: the medicament sequence order was reversed from that of pre-treatment group. Using dual international quality of life (QOL) scores, the effect of SFI on the patients' QOL was observed through randomized self pre- and post-crossover control., Results: The QOL in the 34 patients after being treated by SFI in combination with GP chemotherapy regimen in one group, and GP chemotherapy regimen alone in the other, was improved in different degrees, with significant difference (P < 0.01); comparison of SFI combined with GP chemotherapy regimen with GP chemotherapy alone showed that QOL in patients was significantly different (P < 0.01)., Conclusion: SFI could improve QOL in patients with NSCLC who were treated with GP regimen.

This paper reported a novel headspace gas chromatographic (GC) technique on quantification of acidic and basic species. It is based on an acid-base reaction between the measured species and bicarbonate in an aqueous solution, which generates carbon dioxide in a closed headspace sample vial. By operating at 60 degrees C, carbon dioxide is completely released to the headspace and thus can be measured by GC with a thermal conductivity detector. Bicarbonate concentrations of 0.030 and 0.0025 mol/L are recommended for general applications and very small species content, respectively. This method is able to accurately measure small sample sizes (down to few milligrams or microliters). The present method is simple, accurate, and automatic.

This paper reports an improved headspace gas chromatographic (GC) technique for determination of monomer solubilities in water. The method is based on a multiple headspace extraction GC technique developed previously [X.S. Chai, Q.X. Hou, F.J. Schork, J. Appl. Polym. Sci., in press], but with the major modification in the method calibration technique. As a result, only a few iterations of headspace extraction and GC measurement are required, which avoids the "exhaustive" headspace extraction, and thus the experimental time for each analysis. For highly insoluble monomers, effort must be made to minimize adsorption in the headspace sampling channel, transportation conduit and capillary column by using higher operating temperature and a short capillary column in the headspace sampler and GC system. For highly water soluble monomers, a new calibration method is proposed. The combinations of these technique modifications results in a method that is simple, rapid and automated. While the current focus of the authors is on the determination of monomer solubility in aqueous solutions, the method should be applicable to determination of solubility of any organic in water.

This study demonstrated a full evaporation (FE) headspace gas chromatographic technique for the determination of residual monomer in methyl methacrylate (MMA) polymer latex. A very small amount (approximately 10-30 mg) of latex was added to a sealed headspace sample vial (20 ml). A near-complete monomer mass transfer from both liquid (aqueous phase) and solid phase (polymer particles) to the vapor phase (headspace) is achieved within 5 min at a temperature of 110 degrees C. The method eliminates sample pretreatment procedures such as the solvent extraction. Thus, it avoids the risk of polymer deposition on the GC system caused by a directly injection of extraction solvent in the conventional GC monomer analysis. The present method is simple, rapid, and accurate.

This work reports a novel method for determination of salt solubility using headspace gas chromatography. A very small amount of volatile compound (such as methanol) is added in the studied solution. Due to the molecular interaction in the solution, the vapor-liquid equilibrium (VLE) partitioning coefficient of the volatile species will change with different salt contents in the solution. Therefore, the concentration of volatile species in the vapor phase is proportional to the salt concentration in the liquid phase, which can be easily determined by headspace gas chromatography. Until the salt concentration in the solution is saturated, the concentration of volatile compound in the vapor phase will continue to increase further and a breakpoint will appear on the VLE curve. The solubility of the salts can be determined by the identification of the breakpoint. It was found that the measured solubility of sodium carbonate and sodium sulfate in aqueous solutions is slightly higher (about 6-7%) than those reported in the literature method. The present method can be easily applied to industrial solution systems.

This study experimentally quantified the formation of organic sulfur compounds in a commercial SuperBatch kraft pulping process using a laboratory pilot-scale digester. The results indicate that wood chips not only can adsorb HS- but also methyl mercaptan (MM) in the black liquor used for pretreatment during the two pretreatment stages. The absorption rate of MM is much faster than that of HS-. In the third stage of SuperBatch pulping, the rate of formation of MM and dimethyl sulfide (DMS) is very similar to that found in conventional batch kraft pulping processes. The study examined the applicability of the phase transition cooking (PTC) concept for reducing organic sulfur compounds in pulping, previously developed in laboratory batch pulping using a bomb-type digester, in a SuperBatch process. It was confirmed that there is a phase transition point (PTP) corresponding to PTC in SuperBatch pulping beyond which further delignification significantly increases the formation of volatile organic sulfur compounds. The results indicate that a 40% reduction of TRS formation can be achieved by using PTC.

A multiple headspace extraction gas chromatographic technique to automate the study of process kinetics that involves volatile species was developed in this study. The technique was demonstrated by using it to study methanol formation in kraft black liquor samples under an isothermal temperature of 70 degrees C. The results indicate that methanol formation in kraft black liquors under isothermal conditions follows an exponential decay function. The present method is very simple, efficient and fully automated. It can be easily applied to study slow kinetic processes, such as reaction or adsorption and desorption, involving volatile species in any environmental and industrial samples with complicated matrices.

This study developed a phase reaction conversion (PRC) headspace gas chromatographic (HS-GC) technique for the measurements of nonvolatile species in liquid or solid samples. The technique is demonstrated by the measurements of carbonate in aqueous carbonate solutions and in kraft pulp mill liquor samples. A very small amount of sulfuric acid (volume of 0.5 ml, concentration of 2 mol/l) is used to acidify a sample of less than 300 microl in volume and convert the dissolved carbonate into carbon dioxide (gas) in a sample vial (reactor) that is analyzed by thermal conductivity detection through a headspace sampler. The carbonate concentrations measured by PRC-HS-GC in seven kraft liquor samples agree very well with those measured using a coulometric and a titrametric method. Simultaneous analysis of multiple species was also conducted to demonstrate the versatility of the method. The present method is very simple, rapid, reliable, accurate, and fully automated. It can be applied to analyze other nonvolatile species in various industrial and environmental samples.

The effect of electrical stimulation of afferent renal nerve (ARN) on cardiovascular response, the synthesis and release of vasopressin were studied in rabbits. During the course of the experiment, the pathway of ARN to central nerve system was also analyzed. The results showed that electrical stimulation of ARN elicited significantly decrease of mean arteral blood pressure and heart rate as well as inhibition of cervical sympathetic nerve activity. In the event of the above physiological changes, the AVP concentration in supraoptic nucleus (SON), paraventricular nucleus (PVN) and plasma was increased, but that in hypophysis was decreased. Injection of sodium nitropruside (SNP) or AVPa indicated that increase of AVP release was due directly to stimulation of ARN. Nodose ganglionectomy or transversal section of spinal cord at different levels suggested that the main afferent pathway of ARN to higher level of central nerve system entered into spinal cord at T5-L2.

Aim: To evaluate the efficacy and safety of tablet huperzine-A (Hup) in patients with Alzheimer's disease., Methods: Using multicenter, prospective, double-blind, parallel, placebo controlled and randomized method, 50 patients were administered orally 0.2 mg (4 tablets) Hup and 53 patients were given po 4 tablets of placebo bid for 8 wk. All patients were evaluated with Wechsler memory scale, Hasegawa dementia scale, mini-mental state examination scale, activity of daily living scale, treatment emergency symptom scale, and measured with BP, HR, ECG, EEG, ALT, AKP, BUN, Cr, Hb, WBC, and urine routine., Results: About 58% (29/50) of patients treated with Hup showed improvements in their memory (P < 0.01), cognitive (P < 0.01), and behavioral (P < 0.01 functions. The efficacy of Hup was better than placebo (36%, 19/53) (P < 0.05). No severe side effect was found., Conclusion: Hup is a promising drug for symptomatic treatment of Alzheimer's disease.

Puerarin is an isoflavone compound isolated from Pueraria lobata (Wild). This study characterized the vascular action of puerarin in order to more clearly elucidate its pharmacological activities. Helically cut strips of cat femoral veins and renal arteries were suspended in an organ chamber filled with Krebs bicarbonate solution for measurement of isometric force development. In the cases of femoral veins and renal arteries isoproterenol (0.01 mumol.L-1 -0.1 mmol.L-1) caused relaxation of methoxamine-induced contraction (0.01 mmol.L-1) in a concentration-related manner. Puerarin (0.01-0.1 mmol.L-1) inhibited the relaxation response to isoproterenol in a concentration-response fashion. Propranolol (0.1-1 mumol.L-1) inhibited the isoproterenol-induced relaxation too. Puerarin (0.1mmol.L-1) did not alter the relaxation response to nitroglycerin (1 mumol.L-1). These results indicated that puerarin acted as a beta-adrenoreceptor antagonist in isolated arteries and veins.

68 urethan-anesthetized rabbits were prepared for registration of changes of respiration, arterial blood pressure (BP), heart rate (HR) and renal sympathetic nerve activity (RSNA) due to stimulation of area postrema (AP) by rectangular pulse trains each lasting for 4 s for every 30 s. During 40 min of such a stimulation paradigm the venous blood samples were collected for radioimmunoassay of plasma renin activity (PRA) (both pre- and post-stimulation), RSNA registered and processed by a computer. Animals were divided into three groups: (1) with AP stimulation only (n = 47); (2) AP stimulation after bilateral renal denervation (n = 13); (3) AP stimulation after propranolol injection (n = 8). In Group I, a 91% increase in PRA, an augmentation of RSNA, a rise of BP and a decrease of HR were observed, while respiration did not show obvious change. In Group II, hemodynamic and RSNA response was similar to that in Group I, but PRA was not changed significantly. In Group III, the effects on BP, HR, respiration and RSNA showed no remarkable changes compared with Group I, but significant inhibition of the response of PRA [from 0.65 +/- 0.07 ng/(ml.h-1) to 0.72 +/- 0.10 ng/(ml.h-1), P > 0.05] was observed. The results mentioned above suggested that electrical stimulation of AP may induce an increase in renin release and renal sympathetic nerve activity and hemodynamic changes in rabbits.