Search

Background: Rapid-mix flow cytometry has emerged as a powerful tool for mechanistic analysis of ligand binding, cell response, and molecular assembly. Although progress has come from improving sample delivery capabilities, little attention has been paid to the volumetric requirements associated with precious biological reagents., Methods: By using programmable syringes, valves, and other fluidic components, we created a modular, precisely regulated rapid-mix device for the delivery of small-volume samples to the flow cytometer. The device was tested using a bead-based assay in which the binding kinetics between native biotin and fluorescein biotin-bearing beads were characterized., Results: Bead suspensions and reagents paired in 35- to 45-microl aliquots were efficiently mixed by the device and delivered to the flow cytometer. Kinetic data associated with the fluorescein biotin beads were analyzed and used to calibrate the performance characteristics of the device in terms of sample delivery and mixing efficiency., Conclusion: The rapid-mix device is capable of detecting subsecond kinetics of biological reactions using microliter volume of samples. Dimensions of the device have been minimized, and the quantitative aspects of sample delivery and analysis have been optimized. Further, the modular design has been optimized for adaptation to a variety of experimental protocols., ((c) 2005 Wiley-Liss, Inc.)

We describe a simple and rapid quantitative assay for biotin and biotin conjugates. The assay is based on the kinetic analysis of the enhancement of fluorescence of streptavidin/fluorescein biotin complexes in the presence of biotin. The kinetic response of fluorescence enhancement is proportional to the concentration of biotin. Standard calibration curves based on the kinetic response are obtained and detection limits of approximately 10(-9)M are established. Because the assay is amenable for use in small volumes of 5-50 microL or bead-based assays, the detection limits can be extended to the femtomole range. Since the assay depends on kinetic analysis, routine quantitation can be achieved without reference to standard curves. The dynamic aspects allow the assay to be extended to a broader range of applications including its use as an indicator of reagent mixing in laminar-flow assays carried out in microfluidic devices.

ATP hydrolysis is required for degradation of polyubiquitinated proteins by the 26S proteasome but is thought to play no role in proteasomal stability during the catalytic cycle. In contrast to this view, we report that ATP hydrolysis triggers rapid dissociation of the 19S regulatory particles from immunopurified 26S complexes in a manner coincident with release of the bulk of proteasome-interacting proteins. Strikingly, this mechanism leads to quantitative disassembly of the 19S into subcomplexes and free Rpn10, the polyubiquitin binding subunit. Biochemical reconstitution with purified Sic1, a prototype substrate of the Cdc34/SCF ubiquitin ligase, suggests that substrate degradation is essential for triggering the ATP hydrolysis-dependent dissociation and disassembly of the 19S and that this mechanism leads to release of degradation products. This is the first demonstration that a controlled dissociation of the 19S regulatory particles from the 26S proteasome is part of the mechanism of protein degradation.

LFA-1 (alphalbeta2) is constitutively expressed on leukocytes, but its activity is rapidly regulated. This rapid activation has been proposed to be associated with conformation changes in the inserted ("I") domain within the headpiece of LFA-1 as well as conversion of the molecules from bent to extended forms. To study these molecular changes as they relate to affinity regulation of LFA-1, we developed and synthesized a fluorescent derivative of BIRT-377 [Kelly et al. (2001) J. Immunol.] to examine changes in LFA-1 affinity in a flow cytometer with live cells. BIRT-377 binds to the ligand-binding or "I" domain of LFA-1. Structure-activity relationships studies indicated that an aminoalkyl group could be added to the central hydantoin group without significantly affecting binding. Using this modified derivative [1-(N-fluoresceinylthioureidobutyl)-[5R]-(4-bromobenzyl)-3-(3,5-dichlorophenyl)-5-methyl-imidazolidine-2,4-dione (FBABIRT)], we analyzed the affinity of FBABIRT binding to LFA-1 on live cells. The binding affinity increases, and the dissociation rate decreases with divalent cation (Mn(2+)) stimulation. We then used FBABIRT with fluorescent resonance energy transfer (FRET) to show that LFA-1 changes its height relative to the cell surface when cells were treated with dithiothreitol (DTT) but not Mn(2+). Competition assays among FBABIRT and BIRT derivatives defined structure-affinity relationships that refine the current model of BIRT-377 binding to the I domain. Our data supports the model in which BIRT-377 binds to the I domain and stabilizes the bent structure of LFA-1, while divalent cation activation results in a small conformational change in the I domain without significant extension of LFA-1. DTT, in contrast, induces a conversion to the extended form of LFA-1 in the presence of BIRT-377 on live cells. The structure-activity studies suggest that BIRT-377 is a fully optimized inhibitor.

A miniaturized immunoassay system based on beads in poly(dimethylsiloxane) microchannels for analyzing multiple analytes has been developed. The method involves real-time detection of soluble molecules binding to receptor-bearing microspheres, sequestered in affinity column format inside a microfluidic channel. Identification and quantitation of analytes occurs via direct fluorescence measurements or fluorescence resonance energy transfer. A preliminary account of this work based on single-analyte format has been published in this journal (Buranda, T.; Huang, J.; Perez-Luna, V. H.; Schreyer, B.; Sklar, L. A.; Lopez, G. P. Anal. Chem. 2002, 74, 1149-1156). We have extended the work to a multianalyte model system composed of discrete segments of beads that bear distinct receptors. Near-simultaneous and real-time detection of diverse analytes is demonstrated. The importance of this work is established in the exploration of important factors related to the design, assessment, and utility of affinity microcolumn sensors. First, beads derivatized with surface chemistry suitable for the attachment of fluorescently labeled biomolecules of interest are prepared and characterized in terms of functionality and receptor site densities by flow cytometry. Second, calibrated beads are incorporated in microfluidic channels. The analytical device that emerges replicates the basic elements of affinity chromatography with the advantages of microscale and real-time direct measurement of bound analyte on beads rather than the indirect determination from eluted sample typical of affinity chromatography. In addition, the two-compartment analysis of the assay data as demonstrated in single-analyte columns provides a template upon which the dynamics of multiple-analyte assays can be characterized using existing theoretical models and be tested experimentally. The assay can potentially detect subfemtomole quantities of protein with high signal-to-noise ratio and a large dynamic range spanning nearly 4 orders of magnitude in analyte concentration in microliter to submicroliter volumes of analyte fluid. The approach has the potential to be generalized to a host of bioaffinity assay methods including analysis of protein complexes (e.g., biomolecular indicators of diseases). Proof-of-principle analytes include FLAG peptide and carcinoembryonic antigen detected at physiologically relevant concentration levels.

In response to ligand binding, G protein-coupled receptors undergo phosphorylation and activate cellular internalization machinery. An important component of this process is the concentration of receptors into clusters on the plasma membrane. Aside from organizing the receptor in anticipation of internalization, little is known of the function of ligand-mediated G protein-coupled receptor clustering, which has traditionally been thought of as being a phosphorylation-dependent event prior to receptor internalization. We now report that following receptor activation, the N-formyl peptide receptor (FPR) forms distinct membrane clusters prior to its association with arrestin. To determine whether this clustering is dependent upon receptor phosphorylation, we used a mutant form of the FPR, DeltaST-FPR, which lacks all phosphorylation sites in the carboxyl-terminal domain. We found that activation of the signaling-competent DeltaST-FPR resulted in rapid receptor clustering on the plasma membrane independent of Gi protein activation. This clustering required receptor activation since the D71A mutant receptor, which binds ligand but is incapable of transitioning to an active state, failed to induce receptor clustering. Furthermore we demonstrated that FPR-mediated clustering and signaling were cholesterol-dependent processes, suggesting that translocation of the active receptor to lipid rafts may be required for maximal signaling activity. Finally we showed that FPR stimulation in the absence of receptor phosphorylation resulted in translocation of FPR to GM1-rich clusters. Our results demonstrate for the first time that formation of a clustered activated receptor state precedes receptor phosphorylation, arrestin binding, and internalization.

The alpha(4)beta(1)-integrin (very late antigen-4 (VLA-4), CD49d/CD29) is an adhesion receptor involved in the interaction of lymphocytes, dendritic cells, and stem cells with the extracellular matrix and endothelial cells. This and other integrins have the ability to regulate their affinity for ligands through a process termed "inside-out" signaling that affects cell adhesion avidity. Several mechanisms are known to regulate integrin affinity and conformation: conformational changes induced by separation of the C-terminal tails, divalent ions, and reducing agents. Recently, we described a fluorescent LDV-containing small molecule that was used to monitor VLA-4 affinity changes in live cells (Chigaev, A., Blenc, A. M., Braaten, J. V., Kumaraswamy, N., Kepley, C. L., Andrews, R. P., Oliver, J. M., Edwards, B. S., Prossnitz, E. R., Larson, R. S., and Sklar, L. A. (2001) J. Biol. Chem. 276, 48670-48678). Using the same molecule, we also developed a fluorescence resonance energy transfer-based assay to probe the "switchblade-like" opening of VLA-4 upon activation. Here, we investigated the effect of reducing agents on the affinity and conformational state of the VLA-4 integrin simultaneously with cell activation initiated by inside-out signaling through G protein-coupled receptors or Mn(2+) in live cells in real time. We found that reducing agents (dithiothreitol and 2,3-dimercapto-1-propanesulfonic acid) induced multiple states of high affinity of VLA-4, where the affinity change was accompanied by an extension of the integrin molecule. Bacitracin, an inhibitor of the reductive function of the plasma membrane, diminished the effect of dithiothreitol, but had no effect on inside-out signaling. Based on this result and differences in the kinetics of integrin activation, we conclude that conformational activation of VLA-4 by inside-out signaling is independent of and additive to reduction-regulated integrin activation.

The phenomenon of intersample contamination in air-segmented continuous-flow assays has been studied for many years, and new uses are being found for these sampling techniques every day. One application that has been developed recently employs a flow cytometer to conduct high-throughput screening assays of biological compounds. We have explored the sources of intersample contamination in the system and shown how methods developed previously can be applied to describe these phenomena. Using a simple model, we were able to accurately measure liquid film thickness in the sample tubing and demonstrate the effects of intersample contamination in a flow cytometer assay. Also, measures have been taken to reduce the level of intersample contamination in cytometric screening assays, helping to make the system a more viable tool for drug screening applications.

Integrins are cell adhesion receptors, expressed on every cell type, that have been postulated to undergo conformational changes upon activation. Here, different affinity states were generated by exposing alpha4-integrins to divalent ions or by inside-out activation using a chemokine receptor. We probed the dynamic structural transformation of the integrin on live cells using fluorescence resonance energy transfer (FRET) between a peptide donor, which specifically binds to the alpha4-integrin, and octadecyl rhodamine B acceptors incorporated into the plasma membrane. We analyzed the data using a model that describes FRET between a random distribution of donors and acceptors in an infinite plane. The distance of closest approach was found to vary with the affinity of the integrin. The change in distance of closest approach was approximately 50 A between resting and Mn2+ activated receptors and approximately 25 A after chemokine activation. We used confocal microscopy to probe the lateral organization of donors and acceptors subsequent to integrin activation. Taken together, FRET and confocal results suggest that changes in FRET efficiencies are primarily due to the vertical extension of the integrin. The coordination between the extension of alpha4-integrin and its affinity provides a mechanism for Dembo's catch-bond concept.

G protein-coupled receptors form a ternary complex of ligand, receptor, and G protein heterotrimer (LRG) during signal transduction from the outside to the inside of a cell. Our goal was to develop a homogeneous, small-volume, bead-based approach compatible with high-throughput flow cytometry that would allow evaluation of G protein coupled receptor molecular assemblies. Dextran beads were derivatized to carry chelated nickel to bind hexahistidine-tagged green fluorescent protein (GFP) and hexahistidine-tagged G proteins. Ternary complexes were assembled on these beads using fluorescent ligand with wild-type receptor or a receptor-Gialpha2 fusion protein, and with a nonfluorescent ligand and receptor-GFP fusion protein. Streptavidin-coated polystyrene beads used biotinylated anti-FLAG antibodies to bind FLAG-tagged G proteins for ternary complex assembly. Validation was achieved by showing time and concentration dependence of ternary complex formation. Affinity measurements of ligand for receptor on particles, of the ligand-receptor complex for G protein on the particles, and receptor-Gialpha2 fusion protein for Gbetagamma, were consistent with comparable assemblies in detergent suspension. Performance was assessed in applications representing the potential of these assemblies for ternary complex mechanisms. We showed the relationship for a family of ligands between LR and LRG affinity and characterized the affinity of both the wild-type and GFP fusion receptors with G protein. We also showed the potential of kinetic measurements to allow observation of individual steps of GTP-induced ternary complex disassembly and discriminated a fast step caused by RG disassembly compared with the slower step of Galphabetagamma disassembly.

The S. cerevisiae SCF(Cdc4) is a prototype of RING-type SCF E3s, which recruit substrates for polyubiquitination by the Cdc34 ubiquitin-conjugating enzyme. Current models propose that Cdc34 ubiquitinates the substrate while remaining bound to the RING domain. In contrast, we found that the formation of a ubiquitin thiol ester regulates the Cdc34/SCF(Cdc4) binding equilibrium by increasing the dissociation rate constant, with only a minor effect on the association rate. By using a F72VCdc34 mutant with increased affinity for the RING domain, we demonstrate that release of ubiquitin-charged Cdc34-S - Ub from the RING is essential for ubiquitination of the SCF(Cdc4)-bound substrate Sic1. Release of ubiquitin-charged E2 from E3 prior to ubiquitin transfer is a previously unrecognized step in ubiquitination, which can explain both the modification of multiple lysines on the recruited substrate and the extension of polyubiquitin chains. We discuss implications of this finding for function of other ubiquitin ligases.

We describe a new approach for the analysis of biomolecular recognition in microfluidic channels. The method involves real-time detection of soluble molecules binding to receptor-bearing microspheres, sequestered in affinity column format inside a microfluidic channel. Identification and quantitation of analytes occurs via direct fluorescence measurements or fluorescence resonance energy transfer (FRET). We establish a model system that detects the FLAG epitope. The assay can potentially detect subfemtomole quantities of antibody with a high signal-to-noise ratio and a large dynamic range spanning nearly 4 orders of magnitude in analyte concentration in microliter-to-submicroliter volumes of analyte fluid. Kinetic and equilibrium constants for the reaction of this receptor-ligand pair are obtained through modeling of kinetic responses of the affinity microcolumn and are consistent with those obtained by flow cytometry. Because of the correlation between kinetic and equilibrium data obtained for the microcolumns, quantitative analysis can be done prior to the steady-state end point of the recognition reaction. This method has the promise of combining the utility of affinity chromatography with the advantage of direct, quantitative, and real-time analysis and the cost-effectiveness of microanalytical devices. The approach has the potential to be generalized to a host of bioaffinity assay methods including analysis of protein complexes and molecular assembly and microsystem-based multianalyte determinations.

Epitope tagging of expressed proteins is a versatile tool for the detection and purification of the proteins. This approach has been used in protein-protein interaction studies, protein localization, and immunoprecipitation. Among the most popular tag systems is the FLAG epitope tag, which is recognized by three monoclonal antibodies M1, M2, and M5. We describe novel approaches to the detection of epitope-tagged proteins via fluorescence resonance energy transfer on beads. We have synthesized and characterized biotinylated and fluorescein-labeled FLAG peptides and examined the binding of FLAG peptides to commercial streptavidin beads using flow cytometric analysis. A requirement of assay development is the elucidation of parameters that characterize the binding interactions between component systems. We have thus compiled a set of Kd values determined from a series of equilibrium binding experiments with beads, peptides, and antibodies. We have defined conditions for binding biotinylated and fluoresceinated FLAG peptides to beads. Site occupancies of the peptides were determined to be on the order of several million sites per bead and Kd values in the 0.3-2.0 nM range. The affinity for antibody attachment to peptides was determined to be in the low nanomolar range (less than 10 nM) for measurements on beads and solution. We demonstrate the applicability of this methodology to assay development, by detecting femtomole amounts of N-terminal FLAG-bacteria alkaline phosphatase fusion protein. These characterizations form the basis of generalizable and high throughput assays for proteins with known epitopes, for research, proteomic, or clinical applications., (Copyright 2001 Academic Press.)

Background: Particulate surfaces such as beads are routinely used as platforms for molecular assembly for fundamental and practical applications in flow cytometry. Molecular assembly is transduced as the direct analysis of fluorescence, or as a result of fluorescence resonance energy transfer. Binding of fluorescent ligands to beads sometimes alters their emission yield relative to the unbound ligands. Characterizing the physical basis of factors that regulate the fluorescence yield of bound fluorophores (on beads) is a necessary step toward their rational use as mediators of numerous fluorescence based applications., Methods: We have examined the binding between two biotinylated and fluoresceinated beta-endorphin peptides and commercial streptavidin beads using flow cytometric analysis. We have analyzed the assembly between a specific monoclonal antibody and an endorphin peptide in solution using resonance energy transfer and compared the results on beads in flow cytometry using steady-state and time-resolved fluorescence., Results: We have defined conditions for binding biotinylated and fluoresceinated endorphin peptides to beads. These measurements suggest that the peptide structure can influence both the intensity of fluorescence and the mode of peptide binding on the bead surface. We have defined conditions for binding antibody to the bead using biotinylated protein A. We compared and contrasted the interactions between the fluoresceinated endorphin peptide and the rhodamine- labeled antibody. In solution we measure a K(d) of <38 nM by resonance energy transfer and on beads 22 nM., Discussion: Some issues important to the modular assembly of a fluorescence resonance energy transfer (FRET) based sensing scheme have been resolved. The affinity of peptides used herein is a function of their solubility in water, and the emission intensity of the bound species depends on the separation distance between the fluorescein and the biotin moiety. This is due to the quasi-specific quenching interaction between the fluorescein and a proximal binding pocket of streptavidin. Detection of antibodies in solution and on beads either by FRET or capture of fluorescent ligands by dark antibodies subsequently enables the determination of K(d) values, which indicate agreement between solution and flow cytometric determinations., (Copyright 1999 Wiley-Liss, Inc.)