Search

Electrochemical oxidation has attracted vast interest as a promising alternative to traditional chemical processes in fine chemical synthesis owing to its fast and sustainable features. An electrocatalytic membrane reactor (ECMR) with a three-dimensional (3D) electrode has been successfully designed for the selective oxidation of alcohols with high current efficiency to the corresponding acids or ketones. The anode electrode was fabricated by the in situ loading of one-dimensional (1D) Co3O4 nanowires (NWs) on the conductive porous Ti membrane (Co3O4 NWs/Ti) via the combination of a facile hydrothermal synthesis and subsequent thermal treatment. The electrocatalytic oxidation (ECO) results of alcohols exhibited superior catalytic performance with a higher current efficiency on the Co3O4 NWs/Ti membrane compared with those of Co3O4 nanoparticles on the Ti membrane (Co3O4 NPs/Ti). Even under low reaction temperatures such as 0 °C, it still displayed a very high ECO activity for alcohol oxidation in the ECMR...

The electrodeposition nature of copper on a gold electrode in a 4.8 pH CuSO4 solution was inquired using X-ray absorption spectroscopy, electrochemical quartz crystal microbalance, and thermal desorption spectroscopy techniques. Our results point out that the electrodeposition of copper prompts the formation of stable oxi-hydroxide species with a formal oxidation state Cu+ without the evidence of metallic copper formation (Cu0). Moreover, the subsequent anodic polarization of Cu2Oaq yields the formation of CuO, in the formal oxidation state Cu2+, which is dissolved at higher anodic potential. It was found that the dissolution process needs less charge than that required for the electrodeposition indicating a nonreversible process most likely due to concomitant water splitting and formation of protons during the electrodeposition.

In this account the application of synchrotron radiation based X-ray photoelectron spectroscopy (XPS) for the investigation of electrochemically active gas-solid and liquid-solid interfaces will be discussed. The potential of Near Ambient Pressure XPS (NAP-XPS) for the estimation of the surface electronic structure of electrochemically active interfaces will be described by two examples. Thereto the oxygen evolution reaction (OER) over Pt and IrO x anodes will be introduced. In particular the analysis of XP core level spectra of IrO x requires the development of an appropriate fit model. Furthermore the design of reaction cells based on proton exchange membranes (PEM) and on electron transparent graphene membranes, which enables the investigation of liquid-gas and liquid-solid interfaces under electrochemical relevant conditions will be discussed. In the last part of this article a perspective to the EMIL project at the synchrotron radiation facility BESSY will be given. The purpose of this project is the implementation of two new beamlines enabling X-ray photoelectron spectroscopy in the X-ray regime from 80 eV–8 keV under reaction conditions. The extension to the so called tender X-ray regime will allow the release of higher kinetic energy photoelectrons which have a higher inelastic mean free path compared to photoelectrons excited by soft X-ray radiation and therefore will enable the investigation of solid-liquid interfaces under electrochemical reaction conditions.

Rapid deactivation presently limits a wide spread use of high-temperature solid oxide cells (SOCs) as otherwise highly efficient chemical energy converters. With deactivation triggered by the ongoing conversion reactions, an atomic-scale understanding of the active triple-phase boundary between electrolyte, electrode, and gas phase is essential to increase cell performance. Here, a multi-method approach is used comprising transmission electron microscopy and first-principles calculations and molecular simulations to untangle the atomic arrangement of the prototypical SOC interface between a lanthanum strontium manganite (LSM) anode and a yttria-stabilized zirconia (YSZ) electrolyte in the as-prepared state after sintering. An interlayer of self-limited width with partial amorphization and strong compositional gradient is identified, thus exhibiting the characteristics of a complexion that is stabilized by the confinement between two bulk phases. This offers a new perspective to understand the function of SOCs at the atomic scale. Moreover, it opens up a hitherto unrealized design space to tune the conversion efficiency.

Mixed ionic and electronic conductor (MIEC) oxides have been proposed as candidates to replace Ni/YSZ composites as anodes for Solid Oxide Fuel Cells (SOFC) due to their good stability under C-based fuels. Some MIECs have also demonstrated a good electro-catalytic activity both for oxygen reduction and hydrogen oxidation, making them suitable for symmetric configurations (S-SOFC). This approach presents remarkable advantages for reducing manufacturing and operational costs, as well as for extending the cell’s lifetime by reversing gas flows and thus partially reversing the negative effects of sulphur poisoning and carbon deposition that may happen during operation. Also, the catalytic activity of MIEC electrodes can be improved by functionalizing the oxide surface with active nanoparticles. In this work, we study the formation of Ni-Fe alloy nanoparticles by exsolution from a Sr0.93(Ti0.3Fe0.63Ni0.07)O3-δ (STFN) perovskite in reducing atmospheres, and also the process of reoxidation when the exsolved material is exposed to an oxidizing atmosphere. The initial Sr-deficient composition was chosen to alleviate the segregation of Sr [1], which typically can occur in these materials. Exsolution has previously been reported to improve the electrochemical performance of STFN anodes [2], but the mechanisms underlying the exsolution process and the solid/gas interface are still not well understood. The possibility of using S-SOFC materials that undergo exsolution also raises the question of whether the material is regenerated during reoxidation. While oxidation-induced redissolution of exsolved nanoparticles has been observed for Fe-Co exsolution on La0.8Sr1.2Fe0.9Co0.1O4−δ perovskites [3], for the Ni-Fe exsolution in Sr2(Fe1.4Ni0.1Mo0.5)O6− δ, nanoparticles remained at the surface even after reoxidation [4]. The first case is a very interesting result to achieve larger cell lifetimes, and the latter case is interesting as it opens an additional route to increase the cathode performance. In fact, in ref. [5] Ni exsolution in SrTi0.1Fe0.85Ni0.05O3− δ is deliberately employed as design strategy, fully exploiting the non-reversibility of the exsolution of nanoparticles. However, it is not clear whether Ni-Fe nanoparticles oxidize to form a (Ni,Fe)Ox phase or if Fe is reincorporated into the lattice leaving only NiO particles at the surface. It is also not clear how Sr segregation is affected by the exsolution/reoxidation treatments, or how the reoxidized STFN perovskite is modified compared to the pristine sample. To address these questions directly, ambient pressure X-ray photoelectron and near-edge X-ray absorption fine structure spectroscopy (AP-XPS and NEXAFS) is used to study the chemical structure of STFN in a complete redox cycle in-situ. Based on the measurements, we can provide insights into the chemical states of Fe and Ni and can differentiate the surface and bulk species for Sr and O in each stage of the cycle. We observe that Ni exsolves readily, but we also note that the amount of surface Fe0 increases with increasing H2 content in the reducing atmosphere; Fe0 also increases with the reduction time following an exponential trend until a plateau value is reached within ~1h. Further, we find a significant Sr segregation in reducing atmospheres, which we presume occurs to compensate for the B-site cation exsolution. The amount of Sr segregation remains constant in the nearest surface after reoxidation, but is partially reversed for larger penetration depths; there is also a rapid reversibility in the Fe oxidation state during reoxidation. These observations were complemented with transmission (TEM) and scanning electron microscopy (SEM) studies, with simultaneous energy dispersive spectroscopy (EDS) analysis. In conclusion, we propose a reoxidation-induced reconstruction which forms a Fe- and Sr-rich STF perovskite in the near-surface region, leaving the Ni segregated from the perovskite. Finally, we link the results to the electrochemical impedance spectroscopy (EIS) response of the STFN electrode, observing that this STFN-reoxidized sample shows a significant improvement in its cathode performance compared to the pristine STFN. [1] Fagg, D. P. et al, J. Eur. Ceram. Soc. 21, 1831–1835 (2001). [2] Zhu, T., Troiani, H. E., Mogni, L. V, Han, M. & Barnett, S. A. Joule 2, 478–496 (2018). [3] Zhou, J. et al. Chem. Mater. 28, 2981–2993 (2016). [4] Liu, T. et al. J. Mater. Chem. A 8, 582–591 (2020). [5] Yang, G., Zhou, W., Liu, M. & Shao, Z. ACS Appl. Mater. Interfaces 8, 35308-35314 (2016). Figure 1

The cathodic behavior of a model solid oxide electrolysis cell (SOEC) has been studied by means of nearambient pressure (NAP) X-ray Photoelectron Spectroscopy (XPS) and near edge X-ray absorption fine structure (NEXAFS), aiming at shedding light on the specific role of the metallic component in a class of cermets used as electrodes. The focus is on the surface chemistry and catalytic role of Cu, the increasingly popular metallic component in electrodes used in CO2 electrolysis and CO2/H2O co-electrolysis. The NAPXPS and NEXAFS results, obtained in situ and operando conditions and under electrochemical control have provided important insights about the evolution of the Cu surface chemical composition. We have found that in dry CO2 ambient carbon deposits are scavenged at low cathodic potential by the oxidising action of nascent O, while at high cathodic polarisations C grows due to activation of the CO reduction. Instead, in CO2/H2O mixtures, surface deposit of C is steady over the whole investigated potential range. The presence of adsorbed CO has also been detected during electrolysis of CO2/H2O mixtures, while no CO is found in pure CO2 ambient.

The solid oxide electrolysis cell (SOEC) technology has a huge potential for future mass production of hydrogen, mainly due to its high electrical-to-chemical energy conversion efficiency. However, the durability and the performance of SOEC devices are inferior to that of other competitive electrolysis technologies inhibiting the commercialization of SOECs. Despite the fact that Ni-based cermets are currently the most widely used cathode materials for SOEC, change of the nickel oxidation state has been accused as a major issue limiting the performance of these devices. In this work we provide operando experimental evidence of the active surface oxidation state and composition of nickel/doped-ceria cermets under water electrolysis conditions using ambient pressure X-ray photoelectron and near edge X-ray absorption fine structure spectroscopies, combined with quantitative spectra simulation. Remarkably under specific operational conditions, nickel is maintained in a partially oxidized state which, counterintuitive to the expected behavior, can be beneficial to the cell performance. This finding may initiate new improvement strategies for SOEC electrodes based on thorough optimization of the operational conditions, in order to engineer in situ the most propitious electrode configuration.

Kinetic measurements in combination with time resolved operando infrared (DRIFTS), in situ near ambient pressure X‐ray photoelectron spectroscopy (NAP‐XPS) and X‐ray absorption near edge spectroscopy (XANES) measurements at the O K‐edge together with high resolution electron microscopy were applied to evaluate the electronic and structural properties of Au/ZnO under industrial and idealized methanol synthesis conditions. CO adsorption during the reaction revealed the presence of negatively charged Au nanoparticles / Au sites under reaction conditions, which are formed during the initial phase of the reaction. Near ambient pressure XPS and XANES demonstrate the build‐up of O‐vacancies during the reaction, which goes along with a substantial increase in the methanol formation rate. The results are discussed in comparison with previous findings for Cu/ZnO and Au/ZnO catalysts.

The impact of CO on the activation and reaction characteristics of Au/ZnO catalysts in methanol synthesis from a CO2/H2 mixture was studied by kinetic, near ambient pressure X-ray photoelectron spectroscopy and X-ray absorption spectroscopy at the O K-edge, together with in situ Foureir transform infrared measurements. Transient measurements under up to industrial reaction conditions (50 bar, 240 °C) show a pronounced transient increase of the activity for methanol formation from CO2/H2 after exposure to a CO/H2 reaction gas mixture, while the steady-state activity is similar to that observed directly after oxidative pretreatment. For the reaction in CO/H2, the much longer activation phase is accompanied by formation of CO2 due to reaction of CO with the ZnO catalyst support. This leads to O-vacancy formation on the support at an extent significantly higher than in CO2/H2. The consequences of these findings on the mechanistic understanding of methanol formation from CO2/H2 on Au/ZnO and for ZnO-supported catalysts in general are discussed.

The impact of CO on the activation and reaction characteristics of Au/ZnO catalysts in methanol synthesis from a CO

Iridium oxide-based catalysts are uniquely active and stable in the oxygen evolution reaction. Theoretical work attributes their activity to oxyl or μ1-O species. Verifying this intermediate experimentally has, however, been challenging. In the present study, these challenges were overcome by combining theory with new experimental strategies. Ab initio molecular dynamics of the solid–liquid interface were used to predict spectroscopic features, whereas sample architecture, developed for surface-sensitive X-ray spectroscopy of electrocatalysts in confined liquid, was used to search for these species under realistic conditions. Through this approach, we have identified μ1-O species during oxygen evolution. Potentiodynamic X-ray absorption additionally shows that these μ1-O species are created by electrochemical oxidation currents in a deprotonation reaction.

During the electrochemical reduction of oxygen, platinum catalysts are often (partially) oxidized. While these platinum oxides are thought to play a crucial role in fuel cell degradation, their nature remains unclear. Here, we studied the electrochemical oxidation of Pt nanoparticles using in situ XPS. When the particles were sandwiched between a graphene sheet and a proton exchange membrane that is wetted from the back, a confined electrolyte layer was formed, allowing us to probe the electrocatalyst under wet conditions. We show that the surface oxide formed at the onset of Pt oxidation has a mixed Ptδ+/Pt2+/Pt4+ composition. The formation of this surface oxide is suppressed when a Br-containing membrane is chosen due to adsorption of Br on Pt. Time-resolved measurements show that oxidation is fast for nanoparticles: even bulk PtO2·nH2O growth occurs on the subminute time scale. The fast formation of Pt4+ species in both surface and bulk oxide form suggests that Pt4+-oxides are likely formed (or reduced) even in the transient processes that dominate Pt electrode degradation.

Manganese oxide (MnOx) electrocatalysts are examined herein by in situ soft X‐ray absorption spectroscopy (XAS) and resonant inelastic X‐ray scattering (RIXS) during the oxidation of water buffered by borate (pH 9.2) at potentials from 0.75 to 2.25 V vs. the reversible hydrogen electrode. Correlation of L‐edge XAS data with previous mechanistic studies indicates MnIV is the highest oxidation state involved in the catalytic mechanism. MnOx is transformed into birnessite at 1.45 V and does not undergo further structural phase changes. At potentials beyond this transformation, RIXS spectra show progressive enhancement of charge transfer transitions from oxygen to manganese. Theoretical analysis of these data indicates increased hybridization of the Mn−O orbitals and withdrawal of electron density from the O ligand shell. In situ XAS experiments at the O K‐edge provide complementary evidence for such a transition. This step is crucial for the formation of O2 from water.

An electrode for the oxygen evolution reaction based on a conductive bi-layered free standing graphene support functionalized with iridium nanoparticles was fabricated and characterized by means of potentiometric and advanced X-ray spectroscopic techniques. It was found that the electrocatalytic activity of iridium nanoparticles is associated to the formation of Ir 5d electron holes. Strong Ir 5d and O 2p hybridization, however, leads to a concomitant increase O 2p hole character, making oxygen electron deficient and susceptible to nucleophilic attack by water. Consequently, more efficient electrocatalysts can be synthesized by increasing the number of electron-holes shared between the metal d and oxygen 2p.

We study the changes in the crystallographic phases and in the chemical states during the iron exsolution process of lanthanum strontium ferrite (LSF, La0.6Sr0.4FeO3−δ). By using thin films of orthorhombic LSF, grown epitaxially on NaCl(001) and rhombohedral LSF powder, the materials gap is bridged. The orthorhombic material transforms into a fluorite structure after the exsolution has begun, which further hinders this process. For the powder material, by a combination of in situ core level spectroscopy and ex situ neutron diffraction, we could directly highlight differences in the Fe chemical nature between surface and bulk: whereas the bulk contains Fe(IV) in the fully oxidized state, the surface spectra can be described perfectly by the sole presence of Fe(III). We also present corresponding magnetic and oxygen vacancy concentration data of reduced rhombohedral LSF that did not undergo a phase transformation to the cubic perovskite system based on neutron diffraction data.

We study the changes in the crystallographic phases and in the chemical states during the iron exsolution process of lanthanum strontium ferrite (LSF, La0.6Sr0.4FeO3-δ). By using thin films of orthorhombic LSF, grown epitaxially on NaCl(001) and rhombohedral LSF powder, the materials gap is bridged. The orthorhombic material transforms into a fluorite structure after the exsolution has begun, which further hinders this process. For the powder material, by a combination of in situ core level spectroscopy and ex situ neutron diffraction, we could directly highlight differences in the Fe chemical nature between surface and bulk: whereas the bulk contains Fe(iv) in the fully oxidized state, the surface spectra can be described perfectly by the sole presence of Fe(iii). We also present corresponding magnetic and oxygen vacancy concentration data of reduced rhombohedral LSF that did not undergo a phase transformation to the cubic perovskite system based on neutron diffraction data.

The electronic and structural properties of Au/ZnO under industrial and idealized methanol synthesis conditions have been investigated. This was achieved by kinetic measurements in combination with time-resolved operando infrared (DRIFTS) as well as in situ near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and X-ray absorption near-edge spectroscopy (XANES) measurements at the O K-edge together with high-resolution electron microscopy. The adsorption of CO during the reaction revealed the presence of negatively charged Au nanoparticles/Au sites during the initial phase of the reaction. Near-ambient-pressure XPS and XANES demonstrate the build-up of O vacancies during the reaction, which goes along with a substantial increase in the rate of methanol formation. The results are discussed in comparison with previous findings for Cu/ZnO and Au/ZnO catalysts.

We present an in situ investigation of the iron exsolution from lanthanum strontium ferrite perovskites. Using in situ X-ray diffraction experiments at the synchrotron, the exact onset of exsolution was determined by a change in the lattice parameter before any iron reflexes become visible. For an initially orthorhombic thin film, on the other hand, a phase transition to a fluorite/rock-salt structure is observed to occur during the exsolution. Also, a difference in the iron oxidation states between bulk and surface is found since photoelectron spectroscopy and X-ray absorption spectroscopy both indicate the existence of the Fe(III)/Fe(II) couple in oxidation/reduction cycles, whereas magnetic measurements would suggest Fe(IV)/Fe(III).

Rapid development of experimental techniques has enabled real time studies of solid gas reactions at the level reaching the atomic scale. In the present paper, we focus on a combination of atomic resolution STEM/EDX, which visualizes the reaction zone, and near ambient pressure (NAP) XPS, which collects information for a surface layer of variable thickness under reaction conditions. We compare the behavior of two affined topological insulators, Bi2Te3 and Sb2Te3. We used a simple reaction with molecular oxygen occurring at 298 K, which is of practical importance to avoid material degradation. Despite certain limitations, a combination of in situ XPS and ex situ cross-sectional STEM/EDX allowed us to obtain a self-consistent picture of the solid gas reaction mechanism for oxidation of Sb2Te3 and Bi2Te3 crystals, which includes component redistribution between the oxide and the subsurface layer and Te segregation with formation of a thin ordered layer at the interface. The process is multistep in case of both compounds. At the very beginning of the oxidation process the reactivity is determined by the energy benefit of the corresponding element oxygen bond formation. Further in the oxidation process, the behavior of these two compounds becomes similar and features component redistribution between the oxide and the subsurface layer.

DTA/TG/MS measurements were used to investigate the temperature-dependent and successive phase formation of different intermetallic In–Pd compounds by controlled reduction of PdO/In2O3 with hydrogen. Reduction procedures were developed to obtain supported intermetallic InPd and In3Pd2 particles by reactive metal–support interaction (RMSI) without detectable amounts of other compounds. In7Pd3 could only be obtained in admixture with elemental indium due to the direct reduction of the In2O3 support at temperatures above 350 °C. All materials exhibit catalytic activity for methanol steam reforming and exhibit high CO2 selectivities up to 98%. Long-term measurements proved the superior stability of the In–Pd/In2O3 materials in comparison with Cu-based systems over 100 h times on stream with high selectivity.

The role of the nitrogen incorporation into titanium, its chemical nature, the location in the titanium lattice and its electrochemical performance were investigated by a combination of several spectroscopy and microscopy techniques using samples prepared by CVD of NH3 at different temperatures and successive electrochemically tested in 1 M of HClO4. We found that nitrogen is incorporated in either the interstitial or substitutional site of the lattice depending on the preparation temperature modifying strongly its corrosion resistance which was ascribed to the N 2p hybridization with the Ti 3d orbitals. It was found that at low temperature the N 2p orbitals were more likely to hybridize with Ti3d-t2g orbitals while higher temperature favors the hybridization with the Ti3d-eg orbitals. This is responsible for the corrosion resistance shown by the samples prepared at higher temperature.

The Cr and Cu promotion mechanisms of high temperature water–gas shift (HT-WGS) iron oxide catalysts, synthesized by coprecipitation, were investigated as a function of reaction conditions. XRD and in situ Raman characterization showed that the initial calcined catalysts consisted of the Fe2O3 (hematite) bulk phase and transformed to the Fe3O4 (magnetite) phase during the HT-WGS reactions. In situ NAP-XPS and HS-LEIS surface analysis revealed that Cr was surface enriched as Cr6+ for the initial catalyst and reduced to Cr3+ during the HT-WGS reactions, with the Cr3+ dissolving into the bulk iron oxide lattice forming a solid solution. In situ NAP-XPS, XANES, and HS-LEIS characterization indicated that Cu was initially present as Cu2+ cations dissolved in the Fe2O3 bulk lattice and reduced to metallic Cu0 nanoparticles (∼3 nm) on the external surface of the iron oxide support during the HT-WGS reactions. In situ HS-LEIS surface analysis also suggests that ∼1/3 of the surface of the Cu nanoparticles was cove...

The selective oxidation of ethanol to acetaldehyde and acetic acid over a monolayer V2O5/TiO2 catalyst has been studied in situ using Fourier transform infrared spectroscopy and near-ambient-pressure X-ray photoelectron spectroscopy (XPS) at temperatures ranging from 100 to 300 °C. The data were complemented with temperature-programmed reaction spectroscopy and kinetic measurements. It was found that under atmospheric pressure at low temperatures acetaldehyde is the major product formed with the selectivity of almost 100%. At higher temperatures, the reaction shifts toward acetic acid, and at 200 °C, its selectivity reaches 60%. Above 250 °C, unselective oxidation to CO and CO2 becomes the dominant reaction. Infrared spectroscopy indicated that during the reaction at 100 °C, nondissociatively adsorbed molecules of ethanol, ethoxide species, and adsorbed acetaldehyde are on the catalyst surface, while at higher temperatures the surface is mainly covered with acetate species. According to the XPS data, titanium cations remain in the Ti4+ state, whereas V5+ cations undergo reversible reduction under reaction conditions. The presented data agree with the assumption that the selective oxidation of ethanol over vanadium oxide catalysts occurs at the redox Vn+ sites via a redox mechanism involving the surface lattice oxygen species. A reaction scheme for the oxidation of ethanol over monolayer V2O5/TiO2 catalysts is suggested.

Platinum and iridium polycrystalline foils were oxidized electrochemically through anodization to create thin platinum and iridium hydrous oxide layers, which were analyzed through laboratory photoelectron spectroscopy during heating and time series (temperature-programmed spectroscopy). The films contain oxygen in the form of bound oxides, water, and hydroxides and were investigated by depth profiling with high-energy photoelectron spectroscopy. The Pt films are unstable and begin to degrade immediately after removal from the electrolyte to form core–shell structures with a metallic inner core and a hydrous oxide outer shell almost devoid of Pt. However, evidence was found for metastable intermediate states of degradation; therefore, it may be possible to manufacture PtOx phases with increased stability. Heating the film to even 100 °C causes accelerated degradation, which shows that stoichiometric oxides such as PtO2 or PtO are not the active species in the electrolyte. The Ir films exhibit increased stability and higher surface Ir content, and gentle heating at low temperatures leads to a decrease in defect density. Although both layers are based on noble metals, their surface structures are markedly different. The complexity of such hydrous oxide systems is discussed in detail with the goal of identifying the film composition more precisely.

Elektronische und strukturelle Eigenschaften vanadiumhaltiger Phasen steuern die Entstehung isolierter aktiver Zentren an der Oberflache von Katalysatoren fur die selektive Oxidation von Alkanen. Wir zeigen, dass dieses Konzept nicht nur auf Vanadiumoxide beschrankt ist. Durch gezielte Anwendung hydrothermaler Synthesemethoden konnte aus dem typischen Verbrennungskatalysator Manganoxid ein selektiver Katalysator fur die oxidative Dehydrierung von Propan entwickelt werden. Nanostrukturiertes, kristallines MnWO4 dient als Tragermaterial, das in der Synthese eine defektreiche MnOx-Oberflachenphase hervorbringt. Sauerstoffdefekte konnen bei Reaktionstemperatur reversibel verbraucht und regeneriert werden. Es wird vermutet, dass MnOx-Zickzack-Ketten an der Oberflache von (010)-Kristallflachen strukturell isolierte Sauerstoffdefekte tragen, die fur die unerwartet gute Leistung des Katalysators in der Propanaktivierung verantwortlich sind.

The evolution of self-sustained reaction-rate oscillations in the catalytic oxidation of propane over a nickel foil has been studied in situ using X-ray photoelectron spectroscopy coupled with online mass spectrometry and gas chromatography. Changes in the effective surface area and in the catalyst morphology under reaction conditions have been examined by scanning electron microscopy and a krypton adsorption technique. It is shown that the regular kinetic oscillations arise under oxygen-lean conditions. CO, CO2, H2, H2O, and propylene are detected as products. The conversion of propane oscillates in a range from 1% to 23%. During the half-periods with high activity, the main reaction pathway is the partial oxi- dation of propane: selectivity toward CO achieves 98%. In contrast, during the half-periods with low activity, the reaction proceeds through three competitive pathways: the partial oxidation of propane, the total oxidation of propane, and the dehydrogenation of propane to propylene. The driving force for the self-sustained kinetic oscillations is the periodic reoxidation of nickel. According to the Ni2p and O1s core-level spectra measured in situ, the high-active catalyst surface is represented by metallic nickel, whereas during the inactive half-periods the catalyst surface is covered with a thick layer of NiO. The intensity of O1s spectra follows the oscillations of O2 in the gas phase during the oxidation of propane. It is found that during the induction period before the regular oscillations appear, a rough and porous structure develops because of strong reconstruction of the catalyst surface. The thickness of the recon- structed layer is approximately 10–20 μm. This process is accompanied with at least an 80-fold increase in the effective surface area compared with a clean, non-treated nickel foil, which undoubtedly leads to a drastic increase in the number of active sites. We believe that it is the main reason for the induction period always being observed before the appearance of self-sustained oscillations in the catalytic oxidation of light hydrocarbons over catalysts with a low specific surface area (single crystals, foils, or wires). Moreover, without such reconstruction, the oscillations cannot arise due to low activity of such catalysts.

Iridium-based materials are among the most active and stable electrocatalysts for the oxygen evolution reaction. Amorphous iridium oxide structures are found to be more active than their crystalline counterparts. Herein, we combine synchrotron-based X-ray photoemission and absorption spectroscopies with theoretical calculations to investigate the electronic structure of Ir metal, rutile-type IrO2, and an amorphous IrOx. Theory and experiment show that while the Ir 4f line shape of Ir metal is well described by a simple Doniach–Sunjic function, the peculiar line shape of rutile-type IrO2 requires the addition of a shake-up satellite 1 eV above the main line. In the catalytically more active amorphous IrOx, we find that additional intensity appears in the Ir 4f spectrum at higher binding energy when compared with rutile-type IrO2 along with a pre-edge feature in the O K-edge. We identify these additional features as electronic defects in the anionic and cationic frameworks, namely, formally OI− and IrIII, which may explain the increased activity of amorphous IrOx electrocatalysts. We corroborate our findings by in situ X-ray diffraction as well as in situ X-ray photoemission and absorption spectroscopies. Copyright © 2015 John Wiley & Sons, Ltd.

Starting from subsurface Zr0-doped “inverse” Pd and bulk-intermetallic Pd0Zr0 model catalyst precursors, we investigated the dry reforming reaction of methane (DRM) using synchrotron-based near ambient pressure in-situ X-ray photoelectron spectroscopy (NAP-XPS), in-situ X-ray diffraction and catalytic testing in an ultrahigh-vacuum-compatible recirculating batch reactor cell. Both intermetallic precursors develop a Pd0–ZrO2 phase boundary under realistic DRM conditions, whereby the oxidative segregation of ZrO2 from bulk intermetallic PdxZry leads to a highly active composite layer of carbide-modified Pd0 metal nanoparticles in contact with tetragonal ZrO2. This active state exhibits reaction rates exceeding those of a conventional supported Pd–ZrO2 reference catalyst and its high activity is unambiguously linked to the fast conversion of the highly reactive carbidic/dissolved C-species inside Pd0 toward CO at the Pd/ZrO2 phase boundary, which serves the role of providing efficient CO2 activation sites. In contrast, the near-surface intermetallic precursor decomposes toward ZrO2 islands at the surface of a quasi-infinite Pd0 metal bulk. Strongly delayed Pd carbide accumulation and thus carbon resegregation under reaction conditions leads to a much less active interfacial ZrO2–Pd0 state.

Alloying provides a means by which to tune a metal catalyst’s electronic structure and thus tailor its performance; however, mean-field behaviour in metals imposes limits. To access unprecedented catalytic behaviour, materials must exhibit emergent properties that are not simply interpolations of the constituent components’ properties. Here we show an emergent electronic structure in single-atom alloys, whereby weak wavefunction mixing between minority and majority elements results in a free-atom-like electronic structure on the minority element. This unusual electronic structure alters the minority element’s adsorption properties such that the bonding with adsorbates resembles the bonding in molecular metal complexes. We demonstrate this phenomenon with AgCu alloys, dilute in Cu, where the Cu d states are nearly unperturbed from their free-atom state. In situ electron spectroscopy demonstrates that this unusual electronic structure persists in reaction conditions and exhibits a 0.1 eV smaller activation barrier than bulk Cu in methanol reforming. Theory predicts that several other dilute alloys exhibit this phenomenon, which offers a design approach that may lead to alloys with unprecedented catalytic properties. In solid metals, electron orbitals form broad bands and their binding of adsorbates depends on the bandwidth. Now, it is shown that a weak solute–matrix interaction in dilute alloys results in extremely narrow electronic bands on the solute, similar to a free-atom electronic structure. This structure affords unique adsorption properties important for catalysis.

We address the question of the nature of Au NP activation and through a combination of experimental and theoretical techniques. In‐situ XPS measurements of Au/TiO₂ during CO oxidation show high catalytic activity can be associated with the formation of an ionic Au species. DFT calculations performed on Au/TiO₂ show that the formation of such ionic Au is due to a strong metal‐support interaction between Au and reduced and defective TiO₂. TEM supports these findings, indicating the formation of an overlayer of transition metal oxide support on Au NPs after CO oxidation. These results suggest TiO₂ lattice oxygen is involved directly in CO oxidation, which was confirmed with labeled ¹⁸O₂ experiments.

Alloy catalysts under reaction conditions are complex entities. In oxidizing atmospheres, multiple phases can coexist on a catalyst s surface as a result of phase segregation and preferential oxidation. Such a scenario can result in unusual substoichiometric and metastable phases that could play important roles in catalytic processes. For instance, AgCu alloys known to exhibit enhanced epoxide selectivity in partial oxidation of ethylene form an oxide like surface structure under reaction conditions. Under these conditions, copper oxides are stable, while silver oxides are not. Consequently, copper segregates to the alloy s surface and forms an oxide overlayer. Little is known about the structure or function of such overlayers, and it is unknown whether they play an active role in the catalyst s enhanced selectivity. In order to develop a clearer picture of such catalysts, the current work utilizes several in situ spectroscopic and microscopic techniques to examine the copper oxide phases that form when AgCu is exposed to epoxidation conditions. It is found that several forms of oxidic Cu coexist simultaneously on the active catalyst s surface, namely, CuO, Cu2O, and some previously unreported form of oxidized Cu, referred to here as CuxOy. Online product analysis, performed during the in situ spectroscopic measurements, shows that increased epoxide selectivity is correlated with the presence of mixed copper oxidation states and the presence of the CuxOy species. These results support previous theoretical predictions that oxidic copper overlayers on silver play an active role in epoxidation. These results furthermore emphasize the need for in situ spectromicroscopic methods to understand the complexity of alloy catalysts

Silver's unique ability to selectively oxidize ethylene to ethylene oxide under an oxygen atmosphere has long been known. Today it is the foundation of ethylene oxide manufacturing. Yet, the mechanism of selective epoxide production is unknown. Here we use a combination of ultrahigh vacuum and in situ experimental methods along with theory to show that the only species that has been shown to produce ethylene oxide, the so-called electrophilic oxygen appearing at 530.2 eV in the O 1s spectrum, is the oxygen in adsorbed SO 4 . This adsorbate is part of a 2D Ag/SO 4 phase, where the nonstoichiometric surface variant, with a formally S(V+) species, facilitates selective transfer of an oxygen atom to ethylene. Our results demonstrate the significant and surprising impact of a trace impurity on a well-studied heterogeneously catalyzed reaction. © 2018 American Chemical Society.

C‐saturated Pd0 nanoparticles with an extended phase boundary to ZrO2 evolve from a Pd0Zr0 precatalyst under CH4 dry reforming conditions. This highly active catalyst state fosters bifunctional action: CO2 is efficiently activated at oxidic phase boundary sites and PdxC provides fast supply of C‐atoms toward the latter.

One of the key factors responsible for the poor cycleability of Li–O2 batteries is a formation of byproducts from irreversible reactions between electrolyte and discharge product Li2O2 and/or intermediate LiO2. Among many solvents that are used as electrolyte component for Li–O2 batteries, acetonitrile (MeCN) is believed to be relatively stable towards oxidation. Using near ambient pressure X-ray photoemission spectroscopy (NAP XPS), we characterized the reactivity of MeCN in the Li–O2 battery. For this purpose, we designed the model electrochemical cell assembled with solid electrolyte. We discharged it first in O2 and then exposed to MeCN vapor. Further, the discharge was carried out in O2 + MeCN mixture. We have demonstrated that being in contact with Li–O2 discharge products, MeCN oxidizes. This yields species that are weakly bonded to the surface and can be easily desorbed. That’s why they cannot be detected by the conventional XPS. Our results suggest that the respective chemical process most probably does not give rise to electrode passivation but can decrease considerably the Coulombic efficiency of the battery., This work of A.K-G., J.J.V-V. and D.M.I. was supported by the Russian Ministry of Science and Education (RFMEFI61614×0007) and Bundesministerium für Bildung and Forschung (Project No. 05K2014) in the framework of the joint Russian-German research project “SYnchrotron and NEutron STudies for Energy Storage (SYNESTESia)”. T.K.Z acknowledges Center for Electrochemical Energy of Skolkovo Institute of Science and Technology for financial support. The work of O.O.K., A.I.B and L.V.Y. is performed within the joint project of the Russian Science Foundation (16-42-01093) and DFG (LA655-17/1). We are grateful to HZB for beamtime granted at ISISS and RGBL beamlines. T.K.Z. and A.S.F. thank to the Russian German laboratory at HZB for support provided. Authors are appreciated to Victor Vizgalov for solid electrolyte membrane preparation. Travelling of T.K.Z. was supported by German-Russian Interdisciplinary Science Center (G-RISC).

The behavior of ternary mixed crystals or solid solutions and its correlation with the properties of their binary constituents is of fundamental interest. Due to their unique potential for application in future information technology, mixed crystals of topological insulators with the spin-locked, gapless states on their surfaces attract huge attention of physicists, chemists and material scientists. (Bi1−xSbx)2Te3 solid solutions are among the best candidates for spintronic applications since the bulk carrier concentration can be tuned by varying x to obtain truly bulk-insulating samples, where the topological surface states largely contribute to the transport and the realization of the surface quantum Hall effect. As this ternary compound will be evidently used in the form of thin-film devices its chemical stability is an important practical issue. Based on the atomic resolution HAADF-TEM and EDX data together with the XPS results obtained both ex situ and in situ, we propose an atomistic picture of the mixed crystal reactivity compared to that of its binary constituents. We find that the surface reactivity is determined by the probability of oxygen attack on the Te–Sb bonds, which is directly proportional to the number of Te atoms bonded to at least one Sb atom. The oxidation mechanism includes formation of an amorphous antimony oxide at the very surface due to Sb diffusion from the first two quintuple layers, electron tunneling from the Fermi level of the crystal to oxygen, oxygen ion diffusion to the crystal, and finally, slow Te oxidation to the +4 oxidation state. The oxide layer thickness is limited by the electron transport, and the overall process resembles the Cabrera–Mott mechanism in metals. These observations are critical not only for current understanding of the chemical reactivity of complex crystals, but also to improve the performance of future spintronic devices based on topological materials.

In this chapter we demonstrate the potential of ambient pressure X-ray photoelectron spectroscopy (AP-XPS) for the estimation of the electronic structure of gas–solid and liquid–solid interfaces active in catalytic processes. Within the last 10 years a strong increase in applications of synchrotron radiation based AP-XPS was observed in studies related to the characterization of heterogeneous catalytic reactions. In particular the correlation of the electronic structure of the active catalyst surfaces and the catalytic performance obtained by in situ studies has provided new insights into reaction mechanisms of heterogeneous catalytic reactions. The huge potential of this technique has led many synchrotron radiation facilities to implement dedicated beamlines with infrastructure for AP-XPS measurements. More recently a demand for investigations of electrochemically active liquid–solid interfaces occurred due to the development of energy storage facilities like electrolyzers. Therefore the evolution of electrochemical in situ cells was triggered and the first studies have recently appeared in the literature. This chapter consists of three parts. Part one describes a study of the CO oxidation over Au nanoparticles. Part two gives a general overview about techniques and related in situ cells which can be applied to the characterization of electrochemically active solid–liquid interfaces. The last part summarizes studies of Pt and IrO x anodes used in the oxygen evolution reaction (OER). The study clearly shows correlations between the evolved oxygen and the electronic structure of the active anodes. In this contribution we will introduce examples of in situ measurements performed at the synchrotron radiation facility BESSY II in Berlin, Germany.

In this contribution, we report the development of in situ electrochemical cells based on proton exchange membranes suitable for studying interfacial structural dynamics of energy materials under operation by near ambient pressure X-ray photoelectron spectroscopy. We will present both the first design of a batch-type two-electrode cell prototype and the improvements attained with a continuous flow three-electrode cell. Examples of both sputtered metal films and carbon-supported metal nanostructures are included demonstrating the high flexibility of the cells to study energy materials. Our immediate focus was on the study of the oxygen evolution reaction, however, the methods described herein can be broadly applied to reactions relevant in energy conversion and storage devices.

Electrochemical oxidation has attracted vast interest as a promising alternative to traditional chemical processes in fine chemical synthesis owing to its fast and sustainable features. An electrocatalytic membrane reactor (ECMR) with a three-dimensional (3D) electrode has been successfully designed for the selective oxidation of alcohols with high current efficiency to the corresponding acids or ketones. The anode electrode was fabricated by the in situ loading of one-dimensional (1D) Co

Elektrochemisch gewachsenes Cobalt auf Graphen weist außergewöhnliche Katalysatoreigenschaften für die Sauerstoffentwicklungsreaktion (OER) auf und bietet die Möglichkeit, die Morphologie und die chemischen Eigenschaften während der Abscheidung zu kontrollieren. Es gibt allerdings noch kein ausreichendes Verständnis der atomaren Struktur dieses Hybridmaterials. Um die elektronische Struktur von Co/Graphen aufzuklären, haben wir eine Durchflusszelle entwickelt, die durch eine Graphenmembran abgeschlossen wird und elektronische und chemische Informationen über die aktiven Oberflächen unter atmosphärischem Druck und in der Gegenwart von flüssigen Elektrolyten unter Verwendung von Röntgenphotoelektronenspektroskopie (XPS) liefert. Wir konnten zeigen, dass Cobalt an Graphen über Carbonyl-ähnliche Spezies bindet, d. h. Co(CO)x , und so die Reduktion von Co3+ zu Co2+ fördert, das als aktives Zentrum des Katalysators vermutet wird.

Extensive density functional theory calculations of the O1s binding energies, adsorption energies, and the experimentally measured in situ X-ray photoelectron spectra of oxygen on silver are reported in an effort to clarify which species are present during ethylene epoxidation. We find that the O1s binding energy of an oxygen adatom increases near linearly with its adsorption energy due to the ionic nature of the Ag/O interaction. Thus, contrary to widespread assignments, a weakly bound oxygen adatom does not account for the electrophilic species with an O1s binding energy of 530 eV that is thought to be active in ethylene epoxidation. Instead, we show that the only species with O1s binding energies near 530 eV are covalently bound, which we find in our calculations, for example, when hydrogen or carbon are present.

Rhenium substantially promotes the rate of Pt-catalyzed glycerol hydrogenolysis to propanediols and shifts the product selectivity from 1,2-propanediol to a mixture of 1,2 and 1,3-propanediols. This work presents experimental evidence for a tandem dehydration–hydrogenation mechanism that occurs over a bifunctional Pt–Re catalyst. Infrared spectroscopy of adsorbed pyridine and the rate of aqueous-phase hydrolysis of propyl acetate were used to identify and quantify Bronsted acid sites associated with the Re component. Near-ambient-pressure XPS revealed a range of Re oxidation states on the Pt–Re catalysts after reduction in H2 at 393 and 493 K, which accounts for the presence of Bronsted acidity. A mechanism involving acid-catalyzed dehydration followed by Pt-catalyzed hydrogenation was consistent with the negative influence of added base, a primary kinetic isotope effect with deuterated glycerol, an inverse isotope effect with dideuterium gas, and the observed orders of reaction.

X-ray photoelectron spectroscopy (XPS) is a widely used technique for characterizing the chemical and electronic properties of highly ordered carbon nanostructures, such as carbon nanotubes and graphene. However, the analysis of XPS data—in particular the C 1s region—can be complex, impeding a straightforward evaluation of the data. In this work, an overview of extrinsic and intrinsic effects that influence the C 1s XPS spectra—for example, photon broadening or carbon–catalyst interaction—of various graphitic samples is presented. Controlled manipulation of such samples is performed by annealing, sputtering, and oxygen functionalization to identify different C[BOND]C bonding states and assess the impact of the manipulations on spectral line shapes and their binding energy positions. With high-resolution XPS and XPS depth profiling, the spectral components arising from disordered carbon and surface-defect states can be distinguished from aromatic sp-2 carbon. These findings illustrate that both spectral line shapes and binding energy components must be considered in the analysis of potentially defective surfaces of carbon materials. The sp-2 peak, characteristic of aromatic carbon, features a strong asymmetry that changes with the curvature of the sample surface and, thus, cannot be neglected in spectral analysis. The applied deconvolution strategy may provide a simple guideline to obtaining high-quality fits to experimental data on the basis of a careful evaluation of experimental conditions, sample properties, and the limits of the fit procedure.

The development of efficient energy conversion systems requires precise engineering of electrochemical interfaces and thus asks for in situ techniques to probe the structure and the composition of the dynamic electrode/electrolyte interfacial region. This work demonstrates the potential of the near ambient pressure X-ray photoelectron spectroscopy (NAPXPS) for in situ studies of processes occurring at the interface between a metal electrode and a liquid electrolyte. By using a model membrane-electrode assembly of a high temperature phosphoric acid-imbibed proton exchange membrane fuel cell, and combining NAPXPS measurements with the density functional theory, it was possible to monitor such fundamental processes as dissociation and migration of the phosphoric acid within a nanostructured Pt electrode under polarization.

In the search for optimized cathode materials for high-temperature electrolysis, mixed conducting oxides are highly promising candidates. This study deals with fundamentally novel insights into the relation between surface chemistry and electrocatalytic activity of lanthanum ferrite based electrolysis cathodes. For this means, near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS) and impedance spectroscopy experiments were performed simultaneously on electrochemically polarized La0.6Sr0.4FeO3−δ (LSF) thin film electrodes. Under cathodic polarization the formation of Fe0 on the LSF surface could be observed, which was accompanied by a strong improvement of the electrochemical water splitting activity of the electrodes. This correlation suggests a fundamentally different water splitting mechanism in presence of the metallic iron species and may open novel paths in the search for electrodes with increased water splitting activity.

The electrodeposition nature of copper on a gold electrode in a 4.8 pH CuSO

Any substantial move of energy sources from fossil fuels to renewable resources requires large scale storage of excess energy, for example, via power to fuel processes. In this respect electrochemical reduction of CO2 may become very important, since it offers a method of sustainable CO production, which is a crucial prerequisite for synthesis of sustainable fuels. Carbon dioxide reduction in solid oxide electrolysis cells (SOECs) is particularly promising owing to the high operating temperature, which leads to both improved thermodynamics and fast kinetics. Additionally, compared to purely chemical CO formation on oxide catalysts, SOECs have the outstanding advantage that the catalytically active oxygen vacancies are continuously formed at the counter electrode, and move to the working electrode where they reactivate the oxide surface without the need of a preceding chemical (e.g., by H2) or thermal reduction step. In the present work, the surface chemistry of (La,Sr)FeO3−δ and (La,Sr)CrO3−δ based perovskite-type electrodes was studied during electrochemical CO2 reduction by means of near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) at SOEC operating temperatures. These measurements revealed the formation of a carbonate intermediate, which develops on the oxide surface only upon cathodic polarization (i.e., under sufficiently reducing conditions). The amount of this adsorbate increases with increasing oxygen vacancy concentration of the electrode material, thus suggesting vacant oxygen lattice sites as the predominant adsorption sites for carbon dioxide. The correlation of carbonate coverage and cathodic polarization indicates that an electron transfer is required to form the carbonate and thus to activate CO2 on the oxide surface. The results also suggest that acceptor doped oxides with high electron concentration and high oxygen vacancy concentration may be particularly suited for CO2 reduction. In contrast to water splitting, the CO2 electrolysis reaction was not significantly affected by metallic particles, which were exsolved from the perovskite electrodes upon cathodic polarization. Carbon formation on the electrode surface was only observed under very strong cathodic conditions, and the carbon could be easily removed by retracting the applied voltage without damaging the electrode, which is particularly promising from an application point of view.

Catalytic materials tend to be metastable. When a material becomes metastable close to a thermodynamic phase transition it can exhibit unique catalytic behavior. Using in situ photoemission spectroscopy and online product analysis, we have found that close to the Cu2O–CuO phase transition there is a boost in activity for a kinetically driven reaction, ethylene epoxidation, giving rise to a 20-fold selectivity enhancement relative to the selectivity observed far from the phase transition. By tuning conditions toward low oxygen chemical potential, this metastable state and the resulting enhanced selectivity can be sustained. Using density functional theory, we find that metastable O precursors to the CuO phase can account for the selectivity enhancements near the phase transition.