Search

The aim of this narrative review was to critically evaluate in vitro studies assessing the efficacy of lasers in the bacterial decontamination of titanium implant surfaces. The MEDLINE, Web of Knowledge and Embase electronic databases were used to search for articles relating to the use of lasers in the bacterial decontamination of titanium specimen surfaces using predetermined search statements. Clinical studies, case reports, case series, review articles and animal models were excluded. Study selection was carried out independently and then cross-checked by two authors through abstract viewing. Eighteen articles were selected for full-text analysis. Erbium-doped yttrium–aluminium–garnet lasers had a wide range of powers capable of inducing bacterial decontamination. While carbon dioxide and gallium–aluminium–arsenide diode lasers demonstrated the ability to produce bacterial decontamination, the bacterial sensitivity to each varied depending on the species involved. There is no concensus on the laser type or settings that are optimal for bacterial decontamination of titanium implant surfaces as studies employ various test specimens, contamination methodologies, irradiation settings and protocols, and outcome measures resulting in limited study comparability. More investigations are required to provide guidelines for the use of laser therapy in the decontamination of implant surfaces.

Cordless retraction paste material for gingival retraction in implant dentistry has recently become of interest to the clinician. However, few studies have been conducted on the use of retraction pastes and their possible interaction with implant surfaces. This in vitro study evaluated the effect of a cordless retraction paste material, Expasyl® (Acteon), on TiUnite® (Nobel Biocare) implant surfaces. Three areas of the fixtures were evaluated before and after contact with the retraction paste using scanning electron microscopy to evaluate changes in surface topography and energy-dispersive spectroscopy to identify any surface chemistry modifications. Alteration of the initial surface after exposure to Expasyl® was identified, with the implant collar showing the most changes.

The aim of this study was to evaluate long-term marginal bone levels for two unsplinted implants supporting mandibular overdentures using conventional and early loading protocols with different implant surfaces and attachment systems.A cohort of 106 edentulous participants (mean age: 65 years) was treated with mandibular two-implant overdentures opposing complete maxillary dentures. Participants were randomly allocated into three loading protocol groups using four implant systems; single-stage surgery was performed for all participants, followed by an unsplinted prosthesis using six different attachment systems. Standardized intraoral radiographs taken at baseline (loading) and over 10 years appraised marginal bone levels mesially and distally from reference points under magnification. Three calibrated examiners repeated measurements, diminishing intra- and interobserver variability. Progressive attrition of participants occurred as a result of deaths, dropouts, and emigration. Seventy-nine participants (74.5%, mean age: 72 years) were available at the 10-year recall. Differences in bone loss among different loading protocols, implant surfaces, and attachment systems were tested using chi-square and one-way analysis of variance tests.Minimal, time-dependent, long-term marginal bone loss occurred with all loading protocols. Annual marginal bone loss progressed at low levels after the first year with episodes of bone loss and gain. There was stability in marginal bone levels over the long term, with the majority of remodeling occurring during the first year of function. Roughened implant surfaces may be beneficial during the early remodeling period. The amount of marginal bone loss in the first year of loading differed significantly by loading protocol and implant surface, whereas attachment system had a minor influence. Differences were not reflected in the success rates calculated using standard criteria. The remaining participants at 10 years were classified as successful related to the criterion of marginal bone loss, irrespective of the determining criteria for success.Either a 2- , 6-, or 12-week loading protocol for mandibular two-implant overdentures is possible in the long term, irrespective of the attachment system used. Minimal marginal bone loss may be attributed primarily to mandibular basal bone remaining from long-term edentulism. Revision of the current implant success criteria to offer a stricter limit is desirable.

Dental plaque is still considered the main etiological factor for periodontal diseases. Our understanding of periodontal disease has advanced from the previous concepts where gingivitis slowly progressed to periodontitis to a more complex scenario that correlates several risk factors in the pathogenesis of periodontal disease. Among these factors, age has been associated with increased rates of periodontal disease as the population gets older. Although the loss of alveolar bone and periodontal attachment is common in the elderly population, and there is evident age-related changes in the periodontium, severe periodontitis is not a natural consequence of ageing. The importance of identifying the risk factors that participate in the pathogenesis of periodontal disease at an early phase, both of the individual and the disease, as well as evaluating the capacity of the individual to control dental plaque will enable the implementation of an adequate preventive program, where the needs and limitations of the individual are considered to specifically tailor the oral hygiene procedures and the mouthwashes to be used. La placa dental es aún considerada el factor etiológico primario de la enfermedad periodontal. La etiopatogenia de esta enfermedad ha avanzado del concepto anterior donde una gingivitis progresaba lentamente a una periodontitis, a un escenario más complejo donde varios factores de riesgo se correlacionan. Dentro estos factores, el envejecimiento ha sido asociado con mayores porcentajes de enfermedad periodontal a medida que la población envejece. Aunque la pérdida ósea y de inserción es común en el adulto mayor y los cambios del periodonto son evidentes con la edad, la enfermedad periodontal severa no es una consecuencia natural del envejecimiento. La importancia de identificar en una etapa temprana del individuo y de la enfermedad los factores de riesgo que participan en la patogenesis de la enfermedad periodontal, así como la evaluación de la capacidad del individuo para controlar la placa dental, permitirán la implementación de programas preventivos adecuados, donde las necesidades y limitaciones del individuo son consideradas para el establecimiento de procedimientos personalizados de higiene oral y el enjuague oral a utilizar.

Mechanical plaque control appears to be the primary means of controlling supragingival dental plaque build-up. Although daily oral hygiene practices and periodic professional care are considered the basis for any program aimed at the prevention and treatment of oral diseases, these procedures are technically demanding, time consuming and can be affected by the compliance and manual dexterity of the patient. Individual skills and acquired behavior patterns determine effectiveness of a preventive program and oral hygiene practice. Successful preventive programs and home care procedures clearly depend on the interaction and commitment between the dental professional and the patient. Identifying the capacity of the individual to comply with the professional recommendations and evaluating the dexterity of the patient to remove supragingival dental plaque will permit the implementation of an adequate preventive program and can help on the selection of adjunctive antimicrobial agents and devices needed to reach an effective oral care routine. El control de la placa dental parece ser el mecanismo primario para controlar el crecimiento de la placa dental supragingival. Aunque la práctica diaria de la higiene bucal y el cuidado profesional periódico, son considerados la base para cualquier programa dirigido a la prevención y tratamiento de las enfermedades de la cavidad bucal, estos procedimientos son técnicamente exigentes, consumen tiempo y pueden ser afectados por la aceptación y la destreza manual del paciente. Las destrezas individuales y los patrones de comportamiento adquiridos, determinan la efectividad de un programa preventivo y la práctica de la higiene bucal. El éxito de los programas preventivos y los procedimientos del cuidado bucal en el hogar dependen claramente de la interacción y compromiso entre el odontólogo y el paciente. La importancia de identificar la capacidad del individuo para cumplir con las recomendaciones y la evaluación de la destreza del paciente para remover la placa dental supragingival, permitirán la implementación de un adecuado programa de prevención que podría ayudar a la selección de un agente antibacteriano coadyuvante y los dispositivos necesarios para alcanzar una rutina de cuidado bucal efectivo.

Background: Maxillary implant overdentures opposing mandibular two-implant overdentures are an underused treatment option for edentulous patients. Fewer implants, simple surgery, and short healing periods may increase patients' acceptance of this treatment concept. Purpose: To determine implant success, after overdenture loading, of three narrow-diameter roughened-surface implants placed in edentulous maxillas, using a one-stage surgical procedure, a 12-week healing period, and opposing mandibular two-implant overdentures. Materials and Methods: Forty edentulous participants with mandibular two-implant overdentures were allocated to two groups with similar implant systems. Each group had three narrow-diameter roughened-surface implants placed into their edentulous maxillas in a one-stage surgical procedure. Standardized intraoral radiography and implant stability tests were performed sequentially at surgery, at 12 weeks (prior to loading), and at 64 weeks (after 1 year of loading with maxillary overdentures). Results: One hundred seventeen implants were placed in 39 participants. After 1 year of loading, 15 implants had failed in 11 patients, 4 implants have been “put to sleep” in 3 patients, and 1 patient has died. Data on marginal bone loss and resonance frequency analysis showed no significant differences between the implant systems. The mean marginal bone loss was 1.30 mm (± 0.44 mm) from surgery to 12 weeks and 0.32 mm (± 0.48 mm) between 12 and 64 weeks with loading. The mean implant stability quotient and resonance frequency values showed a statistically significant improvement over time, at 56.05 (5,891 Hz), 57.54 (5,981 Hz), and 60.88 (6,167 Hz) at surgery, 12 weeks, and 64 weeks, respectively. The overall success rate for all implants combined was 81%, and the cumulative survival rate was 84.61%. Conclusion: In patients with mandibular two-implant overdentures, three narrow-diameter roughened-surface implants can be placed in the edentulous maxilla, using a one-stage surgical procedure, and can be loaded within 12 weeks with overdentures for 1 year.

The aim of this study was to compare the success rates after 1 and 2 years of conventionally and early loaded pairs of unsplinted ITI implants supporting mandibular overdentures in edentulous patients. Twenty-four participants (age range 55-80 years) were randomly allocated with maximum concealment to two treatment groups. In the first group, the implants were allowed to heal for 12 weeks before being functionally loaded (control) and the second group had 6 weeks of healing with identical loading. All participants had new conventional complete maxillary and mandibular dentures prior to the study. Two sandblasted large-grit acid-etched (SLA) surface ITI implants were placed in the mandibular interforaminal area, following a standardized nonsubmerged surgical protocol. After 6 or 12 weeks of healing, matrices were processed into the fitting surface of the pre-existing mandibular dentures and the implants loaded. Implant success was determined using mobility tests and radiographs taken at baseline and 52 and 104 weeks after surgery. Clinical peri-implant parameters were also documented. Results showed all implants successfully osseointegrated, according to accepted criteria, after 2 years. Mean loss of crestal bone height after 1 year was 0.35 +/- 0.22 mm (control) vs. 0.27 +/- 0.18 mm (test). After 2 years this reduced to 0.09 +/- 0.06 mm (control) vs. 0.12 +/- 0.17 mm (test). The mean Periotest value after 1 year was -4.9 (control) vs.-3.78 (test). After 2 years, the mean resonance frequency value for the control implants was 6797 Hz [mean implant stability quotient (ISQ) = 64.77] and for the test implants 6670 Hz (mean ISQ = 62.0). Shortened loading periods for these ITI implants did not cause any statistically significant differences in osseointegration or peri-implant parameters. We conclude that pairs of unsplinted SLA-surface ITI implants can be successfully loaded with mandibular overdentures 6 weeks after surgery.

Background: Step-wise reduction in loading protocols is necessary to evaluate early loading of implants with mandibular overdentures. Purpose: To compare the success rates of two different dental implant systems following conventional or early loading protocols in patients being rehabilitated with mandibular overdentures. Materials and Methods: Forty-eight edentulous participants were randomly allocated to two different implant systems: one with a machined titanium implant surface (Sterioss, Nobel Biocare, Yorba Linda, California, USA) and the other with a roughened titanium surface (Southern Implants, Irene, South Africa). For each system, the participants were further divided into control groups, in whom mandibular implant overdentures and their respective matrices were inserted following a standard 12-week healing period, and test groups, in whom a 6-week healing period was followed prior to identical loading. Two unsplinted implants to support implant overdentures were placed in the anterior mandible of all participants, using a standardized one-stage surgical procedure. Mobility tests and marginal bone levels, as well as periimplant parameters, were evaluated at each baseline and 52 and 104 weeks after surgery. Results: There was no statistically significant difference in the success rates of the two systems in either control or test groups. At the 2-year evaluation, a success rate was found of 87.5% and 70.8.% for the control and test Sterioss groups, respectively, and 83.3% and 100% for the control and test Southern Implants groups were observed. For the Sterioss groups, eight implants were lost at an early stage: seven in the test group and one in the control group. For the Southern Implants control and test groups, no failures were seen at any time interval. There were no significant differences in marginal bone loss, Periotest values, and peri-implant parameters between implant systems or between any of the control or test groups. Conclusions: Early loading, with step-wise reductions in loading protocols, of unsplinted machined Sterioss and roughened Southern Implants fixtures with mandibular overdentures is possible for up to 2 years.