Search

In this article, the existence, stability and bifurcation structure of time-periodic solutions (including ones that also have the property of spatial localization, i.e., breathers) are studied in an array of cantilevers that have magnetic tips. The repelling magnetic tips are responsible for the intersite nonlinearity of the system, whereas the cantilevers are responsible for the onsite (potentially nonlinear) force. The relevant model is of the mixed Fermi-Pasta-Ulam-Tsingou and Klein-Gordon type with both damping and driving. In the case of base excitation, we provide experimental results to validate the model. In particular, we identify regions of bistability in the model and in the experiment, which agree with minimal tuning of the system parameters. We carry out additional numerical explorations in order to contrast the base excitation problem with the boundary excitation problem and the problem with a single mass defect. We find that the base excitation problem is more stable than the boundary excitation problem and that breathers are possible in the defect system. The effect of an onsite nonlinearity is also considered, where it is shown that bistability is possible for both softening and hardening cubic nonlinearities.

In this study, topology optimized, patient specific osteosynthesis plates (TOPOS-implants) are evaluated for the mandibular reconstruction using fibula segments. These shape optimized implants are compared to a standard treatment with miniplates (thickness: 1.0 mm, titanium grade 4) in biomechanical testing using human cadaveric specimen. Mandible and fibula of 21 body donors were used. Geometrical models were created based on automated segmentation of CT-scans of all specimens. All reconstructions, including cutting guides for osteotomy as well as TOPOS-implants, were planned using a custom-made software tool. The TOPOS-implants were produced by electron beam melting (thickness: 1.0 mm, titanium grade 5). The fibula-reconstructed mandibles were tested in static and dynamic testing in a multi-axial test system, which can adapt to the donor anatomy and apply side-specific loads. Static testing was used to confirm mechanical similarity between the reconstruction groups. Force-controlled dynamic testing was performed with a sinusoidal loading between 60 and 240 N (reconstructed side: 30% reduction to consider resected muscles) at 5 Hz for up to 5 · 105 cycles. There was a significant difference between the groups for dynamic testing: All TOPOS-implants stayed intact during all cycles, while miniplate failure occurred after 26.4% of the planned loading (1.32 · 105 ± 1.46 · 105 cycles). Bone fracture occurred in both groups (miniplates: n = 3, TOPOS-implants: n = 2). A correlation between bone failure and cortical bone thickness in mandible angle as well as the number of bicortical screws used was demonstrated. For both groups no screw failure was detected. In conclusion, the topology optimized, patient specific implants showed superior fatigue properties compared to miniplates in mandibular reconstruction. Additionally, the patient specific shape comes with intrinsic guiding properties to support the reconstruction process during surgery. This demonstrates that the combination of additive manufacturing and topology optimization can be beneficial for future maxillofacial surgery.

BackgroundA substantial proportion of echinococcosis transmission to humans via contamination of food has been assumed. However, the relative importance of food as a transmission vehicle has previously been estimated through expert opinion rather than empirical data.ObjectiveTo find and evaluate empirical data that could be used to estimate the source attribution of echinococcosis, in particular the proportion that is transmitted through contaminated food.MethodsA systematic review was undertaken to identify reports on the risk factors for human cystic (CE) and alveolar (AE) echinococcosis. Data bases searched included PubMed, Scopus, Web of Knowledge, Cab Direct, Science Direct, Google Scholar, eLIBRARY.RU, CyberLeninka, CNKI and VIP. Search terms included Echinococc*, hydatid, epidemiology, logistic regression, risk factors, odds ratio, relative risk, risk factors. Reports, including grey literature where available, that had suitable data were selected and data were extracted. The main pathways of transmission were hypothesised to be contact with the definitive host, contaminated water, contaminated food and contaminated environment (other than food). For each study the attributable fraction for these potential sources of infection was calculated from the data presented. A meta-analysis was then undertaken to obtain pooled estimates for the relative contribution of these transmission pathways.ResultsData from 28 cross-sectional studies and 14 case-control studies were extracted. There was strong evidence for transmission by direct contact with dogs for both CE and AE. The estimated attributable fractions were 26.1% (CI 13.8%-39.6%) and 34.4% (CI 20.7% -48.2%) respectively. Transmission through contaminated water was estimated to be responsible for approximately 29.4% (CI 12.1%-51.7%) for CE and 24.8% (CI 10.6% to 42.6%) for AE. Contaminated food may be responsible for approximately 23.4% of CE cases (CI 2.1%-47.3%). Globally, there was insufficient evidence to conclude AE can be transmitted by food, although case control studies from low human incidence areas suggested that possibly 32.5% (CI 10.0%-53.2%) could be transmitted by food. There was also insufficient evidence that direct contact with foxes was a significant source of human disease. There were no suitable studies with a risk of environmental contact reported, but the residual attributable fraction thatwould likely include this pathway was approximately 21.1% for CE and 11.1% for AE.ConclusionsThe results support the hypothesis that dog contact and drinking contaminated water are major pathways of transmission of both CE and AE. For contaminated food, the results are less consistent, but suggest that it is an important transmission pathway and provide better evidence than expert elicitations as previously used.

Abstract Background Animal fracture models, primarily performed in rats, are crucial to investigate normal and pathological bone healing. However, results of biomechanical testing representing a major outcome measure show high standard deviations often precluding statistical significance. Therefore, the aim of our study was a systematical examination of biomechanical characteristics of rat femurs during three-point bending. Furthermore, we tried to reduce variation of results by individually adapting the span of bearing and loading areas to the bone’s length. Methods We examined 40 paired femurs of male Wistar-rats by DXA (BMD and BMC of the whole femur) and pQCT-scans at the levels of bearing and loading areas of the subsequent biomechanical three-point bending test. Individual adjustment of bearing and loading bars was done respecting the length of each specimen. Subgroups of light ( 400 g, n = 18) animals were formed and analysed separately. We furthermore compared the results of the individualised bending-setting to 20 femurs tested with a fix span of 15 mm. Results Femurs showed a length range of 34 to 46 mm. The failure loads ranged from 116 to 251 N (mean 175.4 ± 45.2 N; heavy animals mean 221 ± 18.9 N; light animals mean 138.1 ± 16.4 N) and stiffness ranged from 185 N/mm to 426 N/mm (mean 315.6 ± 63 N/mm; heavy animals mean 358.1 ± 34.64 N/mm; light animals mean 280.8 ± 59.85 N/mm). The correlation of densitometric techniques and failure loads was high (DXA R2 = 0.89 and pQCT R2 = 0.88). In comparison to femurs tested with a fix span, individual adaptation of biomechanical testing homogenized our data significantly. Most notably, the standard deviation of failure loads (221 ± 18.95 N individualized setting vs. 205.5 ± 30.36 N fixed) and stiffness (358.1 ± 34.64 N/mm individualized setting vs. 498.5 ± 104.8 N/mm fixed) was reduced by at least one third. Conclusions Total variation observed in any trait reflects biological and methodological variation. Precision of the method hence affects the statistical power of the study. By simply adapting the setting of the biomechanical testing, interindividual variation could be reduced, which improves the precision of the method significantly.

Abstract Background Capsular contracture is one of the most common complications in surgical interventions for aesthetic breast augmentation or post-mastectomy breast reconstruction involving the use of silicone prostheses. Although the precise cause of capsular contracture is yet unknown, the leading hypothesis is that it is caused by long-term unresolved foreign body reaction towards the silicone breast implant. To authors’ best knowledge, this is the first study that elucidates the presence of lysyl oxidase (LOX)—an enzyme that is involved in collagen and elastin crosslinking within fibrous capsules harvested from patients with severe capsular contracture. It was hypothesized that over-expression of LOX plays a role in the irreversible crosslinking of collagen and elastin which, in turn, stabilizes the fibrous proteins and contributes to the progression of capsular contracture. Methods Eight fibrous capsules were collected from patients undergoing capsulectomy procedure, biomechanical testing was performed for compressive Young’s moduli and evaluated for Type I and II collagen, elastin and LOX by means of non-linear optical microscopy and immunohistology techniques. Results Observations revealed the heterogeneity of tissue structure within and among the collected fibrous capsules. Regardless of the tissue structure, it has been shown that LOX expression was intensified at the implant-to-tissue interface. Conclusion Our results indicate the involvement of LOX in the initiation of fibrous capsule formation which ultimately contributes towards the progression of capsular contracture.

Abstract Objectives Rat fracture models are extensively used to characterize normal and pathological bone healing. Despite, systematic research on inter- and intra-individual differences of common rat bones examined is surprisingly not available. Thus, we studied the biomechanical behaviour and radiological characteristics of the humerus, the tibia and the femur of the male Wistar rat—all of which are potentially available in the experimental situation—to identify useful or detrimental biomechanical properties of each bone and to facilitate sample size calculations. Methods 40 paired femura, tibiae and humeri of male Wistar rats (10–38 weeks, weight between 240 and 720 g) were analysed by DXA, pQCT scan and three-point-bending. Bearing and loading bars of the biomechanical setup were adapted percentually to the bone’s length. Subgroups of light (skeletal immature) rats under 400 g (N = 11, 22 specimens of each bone) and heavy (mature) rats over 400 g (N = 9, 18 specimens of each bone) were formed and evaluated separately. Results Radiologically, neither significant differences between left and right bones, nor a specific side preference was evident. Mean side differences of the BMC were relatively small (1–3% measured by DXA and 2.5–5% by pQCT). Over all, bone mineral content (BMC) assessed by DXA and pQCT (TOT CNT, CORT CNT) showed high correlations between each other (BMC vs. TOT and CORT CNT: R 2 = 0.94–0.99). The load–displacement diagram showed a typical, reproducible curve for each type of bone. Tibiae were the longest bones (mean 41.8 ± 4.12 mm) followed by femurs (mean 38.9 ± 4.12 mm) and humeri (mean 29.88 ± 3.33 mm). Failure loads and stiffness ranged from 175.4 ± 45.23 N / 315.6 ± 63.00 N/mm for the femurs, 124.6 ± 41.13 N / 260.5 ± 59.97 N/mm for the humeri to 117.1 ± 33.94 N / 143.8 ± 36.99 N/mm for the tibiae. Smallest interindividual differences were observed in failure loads of the femurs (CV% 8.6) and tibiae (CV% 10.7) of heavy animals, light animals showed good consistency in failure loads of the humeri (CV% 7.7). Most consistent results of both sides (left vs. right) in failure loads were provided by the femurs of light animals (mean difference 4.0 ± 2.8%); concerning stiffness, humeri of heavy animals were most consistent (mean difference of 6.2 ± 5%). In general, the failure loads showed strong correlations to the BMC (R 2 = 0.85–0.88) whereas stiffness correlated only moderate, except for the humerus (BMC vs. stiffness: R 2 = 0.79). Discussion Altogether, the rat’s femur of mature specimens showed the most accurate and consistent radiological and biomechanical results. In synopsis with the common experimental use enabling comparison among different studies, this bone offers ideal biomechanical conditions for three point bending experiments. This can be explained by the combination of a superior aspect ratio and a round and long, straight morphology, which satisfies the beam criteria more than other bones tested.