Search

Upcoming human-related applications such as soft wearable electronics, flexible haptic systems, and active bio-medical devices will require bio-friendly actuating materials. Here, we report a soft biomolecule actuator based on carboxylated bacterial cellulose (CBC), ionic liquid (IL), and poly (3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (, Pedot: PSS) electrodes. Soft and biocompatible polymer-IL composites were prepared via doping of CBC with ILs. The highly conductive, Pedot: PSS layers were deposited on both sides of the CBC-IL membranes by a dip-coating technique to yield a sandwiched actuator system. Ionic conductivity and ionic exchange capacity of the CBC membrane can be increased up to 22.8 times and 1.5 times compared with pristine bacterial cellulose (BC), respectively, resulting in 8 times large bending deformation than the pure BC actuators with metallic electrodes in an open air environment. The developed CBC-IL actuators show significant progress in the development of biocompatible and soft actuating materials with quick response, low operating voltage and comparatively large bending deformation.

The electromagnetic interference (EMI) shielding of reduced graphene oxide (MRG), B-doped MRG (B-MRG), N-doped MRG (N-MRG), and B-N co-doped MRG (B-N-MRG) have been studied in the Ku-band frequency range (12.8-18 GHz). We have developed a green, fast, and cost-effective microwave assisted route for synthesis of doped MRG. B-N-MRG shows high electrical conductivity in comparison to MRG, B-MRG and N-MRG, which results better electromagnetic interference (EMI) shielding ability. The co-doping of B and N significantly enhances the electrical conductivity of MRG from 21.4 to 124.4 Sm(-1) because N introduces electrons and B provides holes in the system and may form a nanojunction inside the material. Their temperature-dependent electrical conductivity follows 2D-variable range hopping (2D-VRH) and Efros-Shklovskii-VRH (ES-VRH) conduction model in a low temperature range (T<50 K). The spatial configuration of MRG after doping of B and N enhances the space charge polarization, natural resonance, dielectric polarization, and trapping of EM waves by internal reflection leading to a high EMI shielding of -42 dB (∼99.99% attenuation) compared to undoped MRG (-28 dB) at a critical thickness of 1.2 mm. Results suggest that the B-N-MRG has great potential as a candidate for a new type of EMI shielding material useful in aircraft, defense industries, communication systems, and stealth technology.

Atomic-scale defects on carbon nanostructures have been considered as detrimental factors and critical problems to be eliminated in order to fully utilize their intrinsic material properties such as ultrahigh mechanical stiffness and electrical conductivity. However, defects that can be intentionally controlled through chemical and physical treatments are reasonably expected to bring benefits in various practical engineering applications such as desalination thin membranes, photochemical catalysts, and energy storage materials. Herein, we report a defect-engineered self-assembly procedure to produce a three-dimensionally nanohole-structured and palladium-embedded porous graphene hetero-nanostructure having ultrahigh hydrogen storage and CO oxidation multifunctionalities. Under multistep microwave reactions, agglomerated palladium nanoparticles having diameters of ∼10 nm produce physical nanoholes in the basal-plane structure of graphene sheets, while much smaller palladium nanoparticles are readily impregnated inside graphene layers and bonded on graphene surfaces. The present results show that the defect-engineered hetero-nanostructure has a ∼5.4 wt % hydrogen storage capacity under 7.5 MPa and CO oxidation catalytic activity at 190 °C. The defect-laden graphene can be highly functionalized for multipurpose applications such as molecule absorption, electrochemical energy storage, and catalytic activity, resulting in a pathway to nanoengineering based on underlying atomic scale and physical defects.

Highly conductive, capacitive and flexible electrodes are fabricated by employing 3D graphene-nanotube-palladium nanostructures and a PEDOT:PSS conducting polymer. The fabricated flexible electrodes, without any additional metallic current collectors, exhibit increased charge mobility and good mechanical properties; they also allow greater access to the electrolyte ions and hence are suitable for flexible energy storage applications., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A novel 3D networked graphene-ferromagnetic hybrid can be easily fabricated using one-step microwave irradiation. By incorporating this hybrid material into shape memory polymers, the synergistic effects of fast speed and the enhancement of thermal conductivity and mechanical stiffness can be achieved. This can be broadly applicable to designing magneto-responsive shape memory polymers for multifunction applications., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Wetting-transparent graphene films grown in situ by chemical vapor deposition on hydrophobic (roughened) copper surfaces offer excellent resistance to copper corrosion while maintaining the intrinsic hydrophobicity of the surface, enabling superior performance for water-harvesting applications., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We describe a method for synthesizing large-area and uniform molybdenum disulfide films, with control over the layer number, on insulating substrates using a gas phase sulfuric precursor (H2S) and a molybdenum metal source. The metal layer thickness was varied to effectively control the number of layers (2 to 12) present in the synthesized film. The films were grown on wafer-scale Si/SiO2 or quartz substrates and displayed excellent uniformity and a high crystallinity over the entire area. Thin film transistors were prepared using these materials, and the performances of the devices were tested. The devices displayed an on/off current ratio of 10(5), a mobility of 0.12 cm(2) V(-1) s(-1) (mean mobility value of 0.07 cm(2) V(-1) s(-1)), and reliable operation.

Without introducing defects in the monolayer of carbon lattice, the deposition of high-κ dielectric material is a significant challenge because of the difficulty of high-quality oxide nucleation on graphene. Previous investigations of the deposition of high-κ dielectrics on graphene have often reported significant degradation of the electrical properties of graphene. In this study, we report a new way to integrate high-κ dielectrics with graphene by transferring a high-κ dielectric nanosheet onto graphene. Al2O3 film was deposited on a sacrificial layer using an atomic layer deposition process and the Al2O3 nanosheet was fabricated by removing the sacrificial layer. Top-gated graphene field-effect transistors were fabricated and characterized using the Al2O3 nanosheet as a gate dielectric. The top-gated graphene was demonstrated to have a field-effect mobility up to 2200 cm(2)/(V s). This method provides a new method for high-performance graphene devices with broad potential impacts reaching from high-frequency high-speed circuits to flexible electronics.

We report a highly versatile and one-pot microwave route to the mass production of three-dimensional graphene-carbon nanotube-iron oxide nanostructures for the efficient removal of arsenic from contaminated water. The unique three-dimensional nanostructure shows that carbon nanotubes are vertically standing on graphene sheets and iron oxide nanoparticles are decorated on both the graphene and the carbon nanotubes. The material with iron oxide nanoparticles shows excellent absorption for arsenic removal from contaminated water, due to its high surface-to-volume ratio and open pore network of the graphene-carbon nanotube-iron oxide three-dimensional nanostructures.