Search

Fast modification of large gold nanoparticles with DNA is achieved by using DNA with a polycationic tail. The conjugated DNA is available for specific hybridization, and therefore can be used for DNA-based assays or for constructing nanoparticle superstructures based on DNA hybridization.

Silver nanoparticle aggregates have been shown to support very large enhancements of fluorescence intensity from organic dye molecules coupled with an extreme reduction in observed fluorescence lifetimes. Here we show that for the same type of aggregates, similar enhancement factors (~75× in intensity and ~3400× in lifetime compared to the native radiative lifetime) are observed for a ruthenium-based phosphorescent dye (when taking into account the effect of charge and the excitation/emission wavelengths). Additionally, the inherently long native phosphorescence lifetimes practically enable more detailed analyses of the distribution of lifetimes (compared with the case with fluorescence decays). It was thus possible to unambiguously observe the deviation from mono-exponential decay which we attribute to emission from a distribution of fluorophores with different lifetimes, as we could expect from a random aggregation process. We believe that combining phosphorescent dyes with plasmonic structures, even down to the single dye level, will offer a convenient approach to better characterize plasmonic systems in detail.

In many human diseases, oligomeric species of amyloid proteins may play a pivotal role in cytotoxicity. Many lines of evidence indicate that permeabilization of cellular membranes by amyloid oligomers may be the key factor in disrupting cellular homeostasis. However, the exact mechanisms by which the membrane integrity is impaired remain elusive. One prevailing hypothesis, the so-called amyloid pore hypothesis, assumes that annular oligomeric species embed into lipid bilayers forming transbilayer protein channels. Alternatively, an increased membrane permeability could be caused by thinning of the hydrophobic core of the lipid bilayer due to the incorporation of the oligomers between the tightly packed lipids, which would facilitate the transport of small molecules across the membrane. In this review, we briefly recapitulate our findings on the structure of α-synuclein oligomers and the factors influencing their interaction with lipid bilayers. Our results, combined with work from other groups, suggest that α-synuclein oligomers do not necessarily form pore-like structures. The emerging consensus is that local structural rearrangements of the protein lead to insertion of specific regions into the hydrophobic core of the lipid bilayer, thereby disrupting the lipid packing.

Aggregated forms of the amyloid-β peptide are hypothesized to act as the prime toxic agents in Alzheimer disease (AD). The in vivo amyloid-β peptide pool consists of both C- and N-terminally truncated or mutated peptides, and the composition thereof significantly determines AD risk. Other variations, such as biotinylation, are introduced as molecular tools to aid the understanding of disease mechanisms. Since these modifications have the potential to alter key aggregation properties of the amyloid-β peptide, we present a comparative study of the aggregation of a substantial set of the most common in vivo identified and in vitro produced amyloid-β peptides., (Copyright © 2012 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.)

We have studied the influence of the local density of optical states (LDOS) on the rate and efficiency of Förster resonance energy transfer (FRET) from a donor to an acceptor. The donors and acceptors are dye molecules that are separated by a short strand of double-stranded DNA. The LDOS is controlled by carefully positioning the FRET pairs near a mirror. We find that the energy transfer efficiency changes with LDOS, and that, in agreement with theory, the energy transfer rate is independent of the LDOS, which allows one to quantitatively control FRET systems in a new way. Our results imply a change in the characteristic Förster distance, in contrast to common lore that this distance is fixed for a given FRET pair.

We present a new size-selective detection method for integrated optical interferometric biosensors that can strongly enhance their performance. We demonstrate that by launching multiple wavelengths into a Young interferometer waveguide sensor it is feasible to derive refractive index changes from different regions above the waveguide surface, enabling one to distinguish between bound particles (e.g. proteins, viruses, bacteria) based on their differences in size and simultaneously eliminating interference from bulk refractive index changes. Therefore it is anticipated that this new method will be ideally suited for the detection of viruses in complex media. Numerical calculations are used to optimize sensor design and the detection method. Furthermore the specific case of virus detection is analyzed theoretically showing a minimum detectable virus mass coverage of 4 × 10(2) fg/mm(2) < (typically corresponding to 5 × 10(1) particles/ml).

Because both the chemical and mechanical properties of living cells play crucial functional roles, there is a strong need for biophysical methods to address these properties simultaneously. Here we present a novel (to our knowledge) approach to measure local intracellular micromechanical and chemical properties using a hybrid magnetic chemical biosensor. We coupled a fluorescent dye, which serves as a chemical sensor, to a magnetic particle that is used for measurement of the viscoelastic environment by studying the response of the particle to magnetic force pulses. As a demonstration of the potential of this approach, we applied the method to study the process of phagocytosis, wherein cytoskeletal reorganization occurs in parallel with acidification of the phagosome. During this process, we measured the shear modulus and viscosity of the phagosomal environment concurrently with the phagosomal pH. We found that it is possible to manipulate phagocytosis by stalling the centripetal movement of the phagosome using magnetic force. Our results suggest that preventing centripetal phagosomal transport delays the onset of acidification. To our knowledge, this is the first report of manipulation of intracellular phagosomal transport without interfering with the underlying motor proteins or cytoskeletal network through biochemical methods., (Copyright © 2012 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

Atomic force microscopy (AFM) is widely used to measure morphological and mechanical properties of biological materials at the nanoscale. AFM is able to visualize and measure these properties in different environmental conditions. However, these conditions can influence the results considerably, rendering their interpretation a matter of some subtlety. We demonstrate this by imaging ~10 nm diameter α-synuclein amyloid fibrils, focusing specifically on the structure of the C-terminal part of the protein monomers incorporated into fibrils. Despite these influences leading to variations in fibril heights, we have shown that by maintaining careful control of AFM settings we can quantitatively compare the morphological parameters of fibrils imaged in air or in buffer conditions. From this comparison we were able to deduce the semiflexible character of this C-terminal region. Fibril height differences measured in air and liquid indicate that the C-terminal region collapses onto the fibril core upon drying. The fibril heights decrease upon increasing ion concentration in solution, suggesting that the C-terminal tails collapse into more compact structures as a result of charge screening. Finally, PeakForce QNM measurements show an apparent heterogeneity of C-terminal packing along the fibril length.

Amyloid fibrils are traditionally associated with neurodegenerative diseases like Alzheimer's disease, Parkinson's disease or Creutzfeldt-Jakob disease. However, the ability to form amyloid fibrils appears to be a more generic property of proteins. While disease-related, or pathological, amyloid fibrils are relevant for understanding the pathology and course of the disease, functional amyloids are involved, for example, in the exceptionally strong adhesive properties of natural adhesives. Amyloid fibrils are thus becoming increasingly interesting as versatile nanobiomaterials for applications in biotechnology. In the last decade a number of studies have reported on the intriguing mechanical characteristics of amyloid fibrils. In most of these studies atomic force microscopy (AFM) and atomic force spectroscopy play a central role. AFM techniques make it possible to probe, at nanometer length scales, and with exquisite control over the applied forces, biological samples in different environmental conditions. In this review we describe the different AFM techniques used for probing mechanical properties of single amyloid fibrils on the nanoscale. An overview is given of the existing mechanical studies on amyloid. We discuss the difficulties encountered with respect to the small fibril sizes and polymorphic behavior of amyloid fibrils. In particular, the different conformational packing of monomers within the fibrils leads to a heterogeneity in mechanical properties. We conclude with a brief outlook on how our knowledge of these mechanical properties of the amyloid fibrils can be exploited in the construction of nanomaterials from amyloid fibrils.

Recently several atomic force microscopy (AFM)-based surface property mapping techniques like pulsed force microscopy (PFM), harmonic force microscopy or Peakforce QNM® have been introduced to measure the nano- and micro-mechanical properties of materials. These modes all work at different operating frequencies. However, complex materials are known to display viscoelastic behavior, a combination of solid and fluid-like responses, depending on the frequency at which the sample is probed. In this report, we show that the frequency-dependent mechanical behavior of complex materials, such as polymer blends that are frequently used as calibration samples, is clearly measurable with AFM. Although this frequency-dependent mechanical behavior is an established observation, we demonstrate that the new high frequency mapping techniques enable AFM-based rheology with nanoscale spatial resolution over a much broader frequency range compared to previous AFM-based studies. We further highlight that it is essential to account for the frequency-dependent variation in mechanical properties when using these thin polymer samples as calibration materials for elasticity measurements by high-frequency surface property mapping techniques. These results have significant implications for the accurate interpretation of the nanomechanical properties of polymers or complex biological samples. The calibration sample is composed of a blend of soft and hard polymers, consisting of low-density polyethylene (LDPE) islands in a polystyrene (PS) surrounding, with a stiffness of 0.2 GPa and 2 GPa respectively. The spring constant of the AFM cantilever was selected to match the stiffness of LDPE. From 260 Hz to 1100 Hz the sample was imaged with the PFM method. At low frequencies (0.5-35 Hz), single-point nanoindentation was performed. In addition to the material's stiffness, the relative heights of the LDPE islands (with respect to the PS) were determined as a function of the frequency. At the lower operation frequencies for PFM, the islands exhibited lower heights than when measured with tapping mode at 120 kHz. Both spring constants and heights at the different frequencies clearly show a frequency-dependent behavior., (This journal is © The Royal Society of Chemistry 2012)

Interactions of oligomeric aggregates of the intrinsically disordered protein α-synuclein with lipid membranes appear to play an important role in the development of Parkinson's disease. The permeabilization of cellular membranes by oligomers has been proposed to result in neuronal death. The detailed mechanisms by which α-synuclein oligomers permeabilize lipid bilayers remain unknown. Two different mechanisms are conceivable. Oligomers may either insert into membranes forming pores through which small molecules can cross the membrane or their interaction with the membrane may disorder the lipid packing, giving rise to membrane defects. Here we show, using kinetic leakage measurements, that α-synuclein oligomer induced impairment of membrane integrity is not limited to the formation of permanent membrane spanning pores. Fast membrane permeabilization could be observed in a fraction of the large unilamellar vesicles. We have also observed, for the first time, that α-synuclein oligomers cause an enhanced lipid flip-flop. In neuronal cells, most of the α-synuclein is not expected to be present in an oligomeric form, but as monomers. In our in vitro experiments, we find that membrane bound monomeric α-synuclein can only delay the onset of oligomer-induced membrane permeabilization, implying that α-synuclein monomers cannot counteract oligomer toxicity.

The infiltration of enhanced green fluorescent protein (EGFP) into nanochannels of different diameters in mesoporous silica particles was studied in detail by fluorescence microspectroscopy at room temperature. Silica particles from the MCM-41, ASNCs and SBA-15 families possessing nanometer-sized (3-8 nm in diameter) channels, comparable to the dimensions of the infiltrated guest protein EGFP (barrel structure with dimensions of 2.4 nm × 4.2 nm), were used as hosts. We found that it is necessary to first functionalize the surfaces of the silica particles with an amino-silane for effective encapsulation of EGFP. We demonstrated successful infiltration of the protein into the nanochannels based on fluorescence microspectroscopy and loading capacity calculations, even for nanochannel diameters approaching the protein dimensions. We studied the spatial distributions of the EGFPs within the silica particles by confocal laser scanning microscopy (CLSM) and multimode microscopy. Upon infiltration, the fluorescence lifetime drops as expected for an emitter embedded in a high refractive index medium. Further, the spectral properties of EGFP are preserved, confirming the structural integrity of the infiltrated protein. This inorganic-protein host-guest system is an example of a nanobiophotonic hybrid system that may lead to composite materials with novel optical properties., (Copyright © 2010 Elsevier Inc. All rights reserved.)

We report on the use of three different atomic force spectroscopy modalities to determine the nanomechanical properties of amyloid fibrils of the human α-synuclein protein. α-Synuclein forms fibrillar nanostructures of approximately 10 nm diameter and lengths ranging from 100 nm to several microns, which have been associated with Parkinson's disease. Atomic force microscopy (AFM) has been used to image the morphology of these protein fibrils deposited on a flat surface. For nanomechanical measurements, we used single-point nanoindentation, in which the AFM tip as the indenter is moved vertically to the fibril surface and back while the force is being recorded. We also used two recently developed AFM surface property mapping techniques: Harmonic force microscopy (HarmoniX) and Peakforce QNM. These modalities allow extraction of mechanical parameters of the surface with a lateral resolution and speed comparable to tapping-mode AFM imaging. Based on this phenomenological study, the elastic moduli of the α-synuclein fibrils determined using these three different modalities are within the range 1.3-2.1 GPa. We discuss the relative merits of these three methods for the determination of the elastic properties of protein fibrils, particularly considering the differences and difficulties of each method.

We report a single molecule detection scheme to investigate excitation spectra of single emitters at room temperature. We demonstrate the potential of single emitter photoluminescence excitation spectroscopy by recording excitation spectra of single CdSe nanocrystals over a wide spectral range of 100 nm. The spectra exhibit emission intermittency, characteristic of single emitters. We observe large variations in the spectra close to the band edge, which represent the individual heterogeneity of the observed quantum dots. We also find specific excitation wavelengths for which the single quantum dots analyzed show an increased propensity for a transition to a long-lived dark state. We expect that the additional capability of recording excitation spectra at room temperature from single emitters will enable insights into the photophysics of emitters that so far have remained inaccessible.

DsRed is representative of the tetrameric reef coral fluorescent proteins that constitute particularly interesting coupled multichromophoric systems. Either a green emitting or a red emitting chromophore can form within each of the monomers of the protein tetramer. Within the tetramers the chromophores are thought to be efficiently fluorescence resonance energy transfer (FRET) coupled. We have used spectrally resolved room temperature single molecule spectroscopy to address the issue of FRET and the role of dark proteins within single protein tetramers of DsRed and its variants DsRed2, DsRed&#95;N42H and AG4. Our results show that for the majority of the tetramers the different chromophores are indeed effectively coupled. However, in a fraction of the tetramers that is characteristic for each DsRed variant analyzed, we observe a lack of effective FRET coupling. For these tetramers we invoke the existence of dark proteins lacking a functional chromophore that interrupt the energy transfer chain within the multichromophoric system. We show that these species lead to donor dequenching that strongly influences the bulk emission spectra., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background: The question of how the aggregation of the neuronal protein α-synuclein contributes to neuronal toxicity in Parkinson's disease has been the subject of intensive research over the past decade. Recently, attention has shifted from the amyloid fibrils to soluble oligomeric intermediates in the α-synuclein aggregation process. These oligomers are hypothesized to be cytotoxic and to permeabilize cellular membranes, possibly by forming pore-like complexes in the bilayer. Although the subject of α-synuclein oligomer-membrane interactions has attracted much attention, there is only limited evidence that supports the pore formation by α-synuclein oligomers. In addition the existing data are contradictory., Methodology/principal Findings: Here we have studied the mechanism of lipid bilayer disruption by a well-characterized α-synuclein oligomer species in detail using a number of in vitro bilayer systems and assays. Dye efflux from vesicles induced by oligomeric α-synuclein was found to be a fast all-or-none process. Individual vesicles swiftly lose their contents but overall vesicle morphology remains unaltered. A newly developed assay based on a dextran-coupled dye showed that non-equilibrium processes dominate the disruption of the vesicles. The membrane is highly permeable to solute influx directly after oligomer addition, after which membrane integrity is partly restored. The permeabilization of the membrane is possibly related to the intrinsic instability of the bilayer. Vesicles composed of negatively charged lipids, which are generally used for measuring α-synuclein-lipid interactions, were unstable to protein adsorption in general., Conclusions/significance: The dye efflux from negatively charged vesicles upon addition of α-synuclein has been hypothesized to occur through the formation of oligomeric membrane pores. However, our results show that the dye efflux characteristics are consistent with bilayer defects caused by membrane instability. These data shed new insights into potential mechanisms of toxicity of oligomeric α-synuclein species.

We experimentally study the statistical distributions and the voltage dependence of the unzipping time of 45 base-pair-long double-stranded DNA through a nanopore. We then propose a quantitative theoretical description considering the nanopore unzipping process as a random walk of the opening fork through the DNA sequence energy landscape biased by a time-fluctuating force. To achieve quantitative agreement fluctuations need to be correlated over the millisecond range and have an amplitude of order k(B)T/bp. Significantly slower or faster fluctuations are not appropriate, suggesting that the unzipping process is efficiently enhanced by noise in the kHz range. We further show that the unzipping time of short 15 base-pair hairpins does not always increase with the global stability of the double helix and we theoretically study the role of DNA elasticity on the conversion of the electrical bias into a mechanical unzipping force.

Bacteriophage T5 DNA ejection is a complex process that occurs on several timescales in vitro. By using a combination of bulk and single phage measurements, we quantitatively study the three steps of the ejection-binding to the host receptor, channel-opening, and DNA release. Each step is separately addressed and its kinetics parameters evaluated. We reconstruct the bulk kinetics from the distribution of single phage events by following individual DNA molecules with unprecedented time resolution. We show that, at the single phage level, the ejection kinetics of the DNA happens by rapid transient bursts that are not correlated to any genome sequence defects. We speculate that these transient pauses are due to local phase transitions of the DNA inside the capsid. We predict that such pauses should be seen for other phages with similar DNA packing ratios., (Copyright (c) 2010 Biophysical Society. Published by Elsevier Inc. All rights reserved.)

We explore the use of imaging surface plasmon resonance (iSPR) to simultaneously measure the refractive index and reaction rates of the commercially available Ormocore photosensitive resist during photopolymerization. To this end, we adapted a commercially available iSPR device. We demonstrate good accuracy in the measurement of the refractive index determined independently of the thickness of the polymerized film. Furthermore, we demonstrate that the refractive index is proportional to the degree of cure (double bond conversion) of the resist. This allows the determination of the reaction rates of the polymerization processes, which show reasonable agreement with photodifferential scanning calorimetry measurements.

Here we report the first observation of long-range transport of excitation energy within a biomimetic molecular nanoarray constructed from LH2 antenna complexes from Rhodobacter sphaeroides. Fluorescence microscopy of the emission of light after local excitation with a diffraction-limited light beam reveals long-range transport of excitation energy over micrometer distances, which is much larger than required in the parent bacterial system. The transport was established from the influence of active energy-guiding layers on the observed fluorescence emission. We speculate that such an extent of energy migration occurs as a result of efficient coupling between many hundreds of LH2 molecules. These results demonstrate the potential for long-range energy propagation in hybrid systems composed of natural light harvesting antenna molecules from photosynthetic organisms.