Search

Objective: The aim of this study was to evaluate the clinical value of color coded Doppler sonography (CCDS) and contrast-enhanced harmonic imaging (CHI) for ultrasound (US) monitoring the integrity of free-flap vascular grafts. Patency of microvascular anastomoses and perfusion as well as microcirculation of the transplanted tissue were analysed., Patients and Methods: Fifteen free parascapular flap grafts performed over a period of three years by a single surgeon were examined with CCDS and CHI. The patients (12 male, 3 female) ranged in age from 16 to 60 years (average age 40+/-12). The follow-up period ranged from two weeks to 2.5 years. CCDS were performed with a multifrequency linear transducer (5-10 MHz, Logiq 9, GE) with 3D flow detection. For detection and characterization, B scan of the flap tissue was compared to tissue harmonic imaging (THI) and Cross Beam with Speckle Reduction Imaging (SRI). US Pulse Inversion Harmonic Imaging (PIHI) after bolus injection of 2.5 ml Sonovue was used for contrast enhancement., Results: Border and tissue structure of the flaps could be detected best in all 15/15 cases using Cross Beam Technology with SRI and THI. Correlations were found for flow parameters of the common femoral artery, popliteal artery and lower leg artery to the anastomotic vessels. 3D imaging with CCDS facilitated flow detection of elongated and small anastomotic vessels in 4/15 cases. Contrast-enhanced US with PIHI allowed dynamic flow detection of the microcirculation of the transplanted tissue over a depth of up to 3 cm with quantitative perfusion curves of the tissue microcirculation. Reduced US contrast enhancement with modified perfusion curves was seen in 2/15 cases with low anastomic flow in CCDS., Conclusion: Assessment of microvascular perfusion with contrast-enhanced ultrasound can provide valuable information on free flap viability. Contrast-enhanced US enables dynamic and quantitative flow detection of free flap tissue.

Aims: The aim of the present study was to evaluate the 6-month survival rate of patients with inoperable or metastatic pancreatic cancer treated with irinotecan and gemcitabine plus 5-fluorouracil. Secondary efficacy end points included response rate, time to progression (TTP), overall survival (OS) and toxicity., Patients and Methods: 30 patients with histologically proven pancreatic carcinoma and at least one bidimensionally measurable lesion were enrolled. Of the patients, 83% had metastatic and 17% locally advanced disease. One cycle, lasting 21 days, comprised treatment on days 1 and 8 consisting of 75 mg/m(2) irinotecan i.v. for 90 min, 1,000 mg/m(2) gemcitabine i.v. for 30 min and 2,000 mg/m(2) fluorouracil (5-FU) for 24 h. A total of six cycles was planned for each patient., Results: 28 patients competed at least one treatment cycle and were therefore assessable for efficacy, and 75% of them achieved the primary end point of the study (survival after 6 months). One-year survival was 25%. Stabilization (partial response and stable disease) was observed in 35.7% (10/28) and partial remission in 7.1% (2/28). The objective response rate was 7.1% (2/28) after completion of the six cycles. Median TTP was 3.4 months (1.2-11.5), and median OS was 8.3 months (2.1-36.2). Regarding severe hematological toxicities, only neutropenia was observed (grade 3 20.7%, 6/29, and grade 4 3.5%, 1/29). In spite of anti-emetic supportive care, nausea affected most of the patients: 79.3% (23/29). Grade 3 vomiting was observed in 4 of the 29 patients (13.8%) and grade 4 in 1 patient (3.5%). Only 1 patient experienced diarrhea grade 3 (3.5%) and 1 patient (3.5%) suffered from a grade 3 peroneal nerve enervation., Conclusions: A combination of irinotecan, gemcitabine and 5-FU is feasible and shows considerable efficacy in patients with inoperable or metastatic pancreatic cancer. Due to its low toxicity, this combination might be an interesting cytotoxic regimen in addition to targeted therapies., (Copyright (c) 2008 S. Karger AG, Basel)

Here, we report the case of fever of unknown origin (FUO) in a 77-year-old white man. The patient presented with a 3-week history of fever (between 38.5 and 39 degrees C) and general malaise. These symptoms had occurred about five to seven times during the past 30 years, and despite repeated hospitalizations, no diagnosis was made. Physical examination did not reveal any specific signs of infection nor did the patient fulfill the criteria for any rheumatic disease including vasculitides. Blood chemistry showed a greatly elevated C-reactive protein (CRP; 158.2 mg/l) and an erythrocyte sedimentation rate >100 mm, indicating an active inflammatory process, and leukocytes were significantly elevated (20,000/mul). Rheumatological parameters showed only nonspecific changes. Finally, a 2-[(18)F]-fluoro-2-deoxy-D: -glucose-positron emission tomography was performed, revealing a markedly enhanced glucose uptake in the ascending aorta and the cardiac valves, indicating vasculitis as the cause of FUO in this patient. Based on this finding, treatment was started with corticosteroids, and 2 days after the initiation of treatment, the patient had normal body temperature, and after 5 days, CRP values had returned to normal. After tapering and final complete removal of steroid treatment, the patient was still free of symptoms, hence no disease-modifying antirheumatic drug therapy was necessary.

The goal of this cadaver study was to compare the stability of anterior vertebral body screws after implantation in soft or cured kyphoplasty cement. Anterior vertebral body screws were inserted in a total of 30 thoracolumbar vertebrae of ten different human specimens: ten screws were implanted in non-augmented vertebrae (group 1), ten screws were placed in soft cement (group 2), and ten screws were placed in cured cement (group 3). The screws were then tested for biomechanical axial pullout resistance. Mean axial pullout strength was 192 N (range: 10-430 N) in group 1, 364 N (range: 65-875 N) in group 2, and 271 N (range: 35-625 N) in group 3. The paired Student's t-test demonstrated a significant difference between pullout strength of groups 1 and 2 (p= 0.0475). No significant difference was seen between pullout strength of groups 1 and 3 (p= 0.2646) and between groups 2 and 3 (p= 0.3863). We achieved a 1.9 times higher pullout strength with kyphoplasty augmentation of osteoporotic vertebrae compared with the pullout strength of non-augmented vertebrae. Implantation of anterior vertebral body screws in cured cement is a satisfactory method. With this method we found a 1.4 times higher pullout strength than non-augmented vertebrae.

Purpose: To evaluate prospectively the accuracy of indirect magnetic resonance (MR) arthrography for supraspinatus tendon tears during neutral positioning or abduction and external rotation (ABER) and neutral positioning., Materials and Methods: Informed consent was obtained in all patients, and the study was approved by the institutional review board. Indirect MR arthrography of the shoulder was performed in 51 symptomatic patients (14 female, 37 male; mean age, 47 years) in the neutral position (set 1) and in the neutral and ABER positions (set 2). Two readers independently interpreted both sets, and diagnoses were compared with arthroscopic findings. Diagnostic accuracy was calculated, and 95% confidence intervals were used to detect significant differences between sets. Diagnostic confidence was recorded by using a three-level confidence score. Differences between sets were evaluated by using the Wilcoxon signed rank test. Interobserver agreement was determined separately for each set and for all diagnoses, full-thickness tears, and partial-thickness tears., Results: For full-thickness tears, there was no benefit to reading set 2. For reader 1, sensitivity and specificity were 95% and 100%, respectively, for set 1 and 100% and 100%, respectively, for set 2. For reader 2, sensitivity and specificity were 80% and 100%, respectively, for set 1 and 100% and 100%, respectively, for set 2. For partial-thickness tears, sensitivity was significantly higher after reading set 2. For reader 1, sensitivity and specificity were 71% and 88%, respectively, for set 1 and 93% and 100%, respectively, for set 2. For reader 2, sensitivity and specificity were 50% and 88%, respectively, for set 1 and 86% and 94%, respectively, for set 2. For both readers, diagnostic confidence for partial-thickness tears was significantly higher after reading set 2. After the interpretation of set 2, kappa values increased from 0.35 to 1.00 for full-thickness tears and from 0.12 to 0.63 for partial-thickness tears., Conclusion: Indirect MR arthrography with supplementary images obtained with patients in the ABER position significantly improved sensitivity and increased diagnostic confidence for partial-thickness tears of the supraspinatus tendon. Interobserver agreement was improved for both full- and partial-thickness tears., (RSNA, 2006)

Objective: A variety of mathematical and trigonometric methods has been described for determining the position of the acetabular cups from conventional radiographs. However, these formulae are subject to unduly large inaccuracies. The aim of the study was to compare the reliability and the accuracy of radiological and CT-based determination of acetabular cup position., Materials and Methods: The positions of acetabular cups of 31 patients were calculated in conventional plain radiographs of the hip using the method described by Widmer. Further, in all patients computed tomograms of the pelvis were performed and the cup position was measured with the aid of a CT-based computer-assisted navigation software. As reference values inclination and anteversion of the cups were calculated in 3D reconstructions of the pelvis with the aid of an image processing software., Results: The radiological measurement as well as the CT-based method showed good intra- and inter-observer reliability and no significant difference in the calculation of the inclination (p=0.409). However, CT-based determination of anteversion was significantly more exact than radiological measurement (p<0.001). The calculation of the cup anteversion from the X-rays showed serious deviations from the reference method and a substantial error range (X-ray: mean deviation +1.74 degrees, range -16.6 degrees to +29.8 degrees , S.D. +/-9.32 degrees; CT-based: mean deviation -0.74 degrees, range -6.6 degrees to +5.3 degrees, S.D. +/-2.87)., Conclusion: For any clinical problem or for clinical studies in which acetabular positions of acetabular cups have to be exactly determined, CT-based measuring methods are obviously the method of choice. Evaluations based only on conventional plain X-rays and calculation of the acetabular cup position using the formula described by Widmer must be regarded as unreliable, particularly, because of problems in measuring the anteversion.

The aim of this study was to evaluate intra-arterial magnetic resonance angiography (MRA) of the iliac arteries. Therefore, 25 consecutive patients (17 male, 8 female) suffering from symptomatic occlusive disease of the lower limbs were investigated prospectively. Catheter angiography was performed before MRA and served as the standard of reference. Contrast-enhanced intra-arterial MRA was performed using a 1.5 Tesla MRI system. Contrast agent (gadodiamide) was injected by a conventional pigtail-shaped angiography catheter placed in the abdominal aorta. Vascular lesions were assessed by four investigators. The degree of stenosis was compared with the findings of conventional catheter angiography. Additionally, the diagnostic quality of the MR angiograms was assessed by the investigators using a semi quantitative five-point scale. All lesions shown by catheter angiography were detected and correctly localized by intra-arterial MRA. MR angiograms exhibit a specificity of 95% and a sensitivity of 96% for stenoses of 50% or more. The diagnostic quality of the images was judged from good to excellent, on average. Intra-arterial MRA exhibits a specificity and sensitivity comparable with intravenous angiography. The image quality appears to be adequate for supporting MR-guided vascular intervention.

We report two cases of proximal endograft collapse with an almost complete aortic occlusion after endovascular tube-graft treatment of thoracic aortic disease (thoracic aneurysm after a type B dissection, traumatic blunt aortic rupture) using the TAG Gore system. Oversizing of endografts is known to cause this complication. In our two cases, however, the oversizing was between 12% and 21.7%, which is less than the allowed oversizing of 25% that is recommended by the manufacturer. This endograft-related complication might be due to a poor alignment of the currently available endografts in highly angulated and tight aortic arches. In the first case, a combined endovascular and open emergent repair procedure achieved a reopening of the proximal endograft by proximal extension (TAG Gore). In the second case, proximal extension was not considered owing to a precise positioning of the endograft distal to the left carotid artery. A balloon-expanding Palmaz stent was therefore placed interventionally in the proximal part of the TAG graft to expand the endograft and to avoid another collapse of the device. This proximal endograft collapse has to be acknowledged as a potentially hazardous complication. We therefore recommend that the proximal part of thoracic endografts in the aortic arch should be closely monitored and we offer two possible endovascular solutions for resolving the problem of proximal endograft collapse.

Purpose: To evaluate the extent to which Tissue Harmonic Imaging (THI) and spatial averaging (Sono-CT, Cross Beam) facilitate the diagnosis of lower leg venous thrombosis., Materials and Methods: In 100 cases of lower leg venous thrombosis, the conventional B-scan, THI, and ultrasonic CT technology (Cross Beam) in examinations using a multi-frequency transducer head (9 - 14 MHz, Logiq 9, GE) were compared during follow-up studies using compression sonography over at least 6 weeks. Two independent examiners performed digital image documentation (PACS connection) without modifying the gray level parameters optimized in the B-scan. A thrombosis was considered to be proven sonographically if at least one ultrasonic modality yielded findings reproducible in follow-up checks at a comparable site in accordance with both examiners., Results: Thromboses in the V. tibialis posterior category (97 %) and the fibular category (81 %) were found most often, followed by muscular venous thromboses (48 %). Thromboses in the V. tibialis anterior category were rare (12 %). The procedure comparison showed an advantage for ultrasonic CT technology in terms of the demarcation of thromboses of the deeper veins (sensitivity 98 %), as compared to THI (sensitivity 87 %, specificity 91 %, PPV: 99 %) and the B-scan (sensitivity 81 %)., Conclusion: If a high-resolution linear transducer is used, THI and ultrasonic CT-Technology can facilitate the diagnosis of a lower leg venous thrombosis.

Background: Gene therapy is an attractive new approach for the treatment of cancer. Therefore, the development of efficient vector systems is of crucial importance in this field. Different adeno-associated virus (AAV) serotypes have been characterized so far, which show considerable differences in tissue tropism. Consequently, we aimed to characterize the most efficient serotype for this application., Methods: To exclude all influences other than those provided by the capsid, all serotypes contained the same transgene cassette flanked by the AAV2 inverted terminal repeats. We systematically compared these vectors for efficiency in human cancer cell directed gene transfer. In order to identify limiting steps, the influence of second-strand synthesis and proteasomal degradation of AAV in a poorly transducible cell line were examined., Results: AAV2 was the most efficient serotype in all solid tumor cells and primary melanoma cells with transduction rates up to 98 +/- 0.3%. Transduction above 70% could be reached with serotypes 1 (in cervical and prostate carcinoma) and 3 (in cervical, breast, prostate and colon carcinoma) using 1000 genomic particles per cell. In the colon carcinoma cell line HT-29 proteasomal degradation limited AAV1-AAV4-mediated gene transfer. Moreover, inefficient second-strand synthesis prevents AAV2-mediated transgene expression in this cell line., Conclusions: Recent advances in AAV-vector technology suggest that AAV-based vectors can be used for cancer gene therapy. Our comparative analysis revealed that, although AAV2 is the most promising candidate for such an application, serotypes 1 and 3 are valid alternatives. Furthermore, the use of self-complementary AAV vectors and proteasome inhibitors significantly improves cancer cell transduction., (Copyright (c) 2005 John Wiley & Sons, Ltd.)

In a prospective and randomised clinical study, acetabular cups were implanted free-hand (control group n=22) or with computer assistance using an image-free navigation system (study group n=23). The cup position was determined postoperatively on pelvic CT. An average inclination of 42.3 degrees (range: 30 degrees -53 degrees ; SD+/-7.0 degrees ) and an average anteversion of 24.0 degrees (range: -3 degrees to 51 degrees ; SD+/-15.0 degrees ) were found in the control group, and an average inclination of 45.0 degrees (range: 40 degrees -50 degrees ; SD+/-2.8 degrees ) and an average anteversion of 14.4 degrees (range: 5 degrees -25 degrees ; SS+/-5.0 degrees ) in the computer-assisted study group. The deviations from the desired cup position (45 degrees inclination, 15 degrees anteversion) were significantly lower in the computer-assisted study group (p<0.001 each). While only 11/22 of the cups in the control group were within the Lewinnek safe zone, 21/23 of the cups in the study group were placed in this target region (p=0.003).

Objective: The aim of this study was to demonstrate the possibility of performing magnetic resonance (MR)-guided interventional therapy for femoral and popliteal artery stenoses with commercially available materials supported by MR real-time imaging and intra-arterial MR angiography., Materials and Methods: A total of 15 patients suffering from symptomatic arterial occlusive disease of the lower limbs with 19 stenoses were included. Interventional intra-arterial digital subtraction angiography was performed before and after angioplasty on each patient as standard of reference. MR images were acquired on a 1.5-T MR scanner. A fast-low-angle shot (FLASH) 3D sequence was applied for a contrast enhanced MR-angiography (ceMRA). A total of 5 mL of diluted gadodiamide was injected via the arterial access. Maximum intensity projections (MIPs) were used as roadmaps and localizers for the interactive positioning of a continuously running 2D-FLASH sequence with a temporal solution of 2 images/second. The lesion was crossed by a balloon-catheter, which was mounted on a guidewire. The visibility was provided by the radiopaque markers on the balloon and was improved by injection of 1 mL of gadolinium into the balloon. Postinterventional control was performed by intra-arterial MR angiography and catheter angiography., Results: Stenoses were localized by intra-arterial MR angiography. The guidewire/balloon combination was visible, and the balloon was placed correctly to cover the entire stenoses. Balloon dilation reduced the degree of stenosis by approximately 57% on average. No complications were observed., Conclusion: MR-guided balloon dilation of femoral and popliteal artery stenoses supported by real-time MR imaging and intra-arterial MR angiography is feasible with commercially available materials.

Purpose: To assess the feasibility of intra-arterial magnetic resonance angiography (iaMRA) with two different protocols., Material and Methods: Twenty patients were prospectively examined after digital subtraction angiography. Contrast-enhanced iaMRA was performed using a 1.5T magnetic resonance imaging (MRI) system. Contrast agent (gadodiamide) was injected through a conventional angiography catheter placed in the abdominal aorta. The patients were randomized into two groups each comprising 10 patients. Group 1 was examined with a FLASH-3D (fast low-angle shot) sequence, allowing the center of the k-space to be acquired 0.5 s after initiation of the measurement. Group 2 was examined with the identical sequence, but the center of the k-space was acquired after 8.7 s. The increase in the intravascular signal intensity was determined and the diagnostic value of the angiograms was independently scored by 4 investigators using a 5-point scale., Results: Nineteen of 20 MRAs were scored as diagnostic; only 1 was scored as non-diagnostic by 2 observers. The diagnostic value of the angiograms of group 2 was judged superior to that of group 1 owing to a more homogeneous intravascular contrast distribution., Conclusion: Intra-arterial MRA is feasible. The diagnostic value of angiograms using a flash sequence with center of the k-space acquisition after 8.7 s ranged from good to excellent. This sequence is appropriate for iaMRA of iliac arteries to support MR guided intervention.

Investigations regarding the reduction of airborne germs in the waste gas of biowaste composting processes have been carried out at the Hamburg University of Science and Technology and the University of Leipzig. Numerous waste gas treatment plants, ranging from laboratory-scale to technical-scale, have been available at the institutes of these two project partners. All plants consisted of bioscrubber/biofilter combinations. The results showed that these biological systems designed for odour control are able to successfully reduce bioaerosol emissions, even though a reduction to background levels could not be achieved. The bioscrubber, if equipped with a droplet separator, proved to be mainly responsible for the reduction, whereas the biofilter acted as a source for microbial emissions originating from the filter material. It could be observed that the microbial population changed while passing the treatment system, indicating the ability of biological waste gas treatment systems to retain potentially pathogenic microorganisms from waste gases.

There are several options to effectively reduce odorous emissions at composting facilities depending on the type of composting system used. Some of the more relevant measures for open and enclosed composting facilities are presented in this article. Results from different investigations on odour reduction efficiencies of biological waste gas treatment systems at various scales are presented. Biofilter/bioscrubber combinations were used and different biofilter materials were tested. The more relevant odorous substances in the waste gas were identified, and their reduction in the different systems was measured. The biofilter proved to be mainly responsible for efficient odour degradation. The investigations presented in this article revealed that screened compost was very effective, and proved to be a low cost biofilter material for odour degradation purposes. Screened compost showed higher degradation rates than a coke-compost mixture newly developed by the University of Leipzig. Furthermore, it seems that enclosed systems have advantages when compared to conventional open single bed biofilters.

Purpose: To show the feasibility of magnetic resonance (MR) for guided interventional therapy of femoral and popliteal artery stenoses with commercially available materials supported by MR real-time imaging and intraarterial MR angiography., Materials and Methods: Three patients (1 female, 2male), suffering from symptomatic arterial occlusive disease with stenoses of the femoral (n = 2) or popliteal (n = 1) arteries were included. Intraarterial digital subtraction angiography was performed in each patient pre- and post-interventionally as standard of reference to quantify stenoses. The degree of the stenoses reached from 71 - 88 %. The MR images were acquired on a 1.5 T MR scanner (Magnetom Sonata; Siemens, Erlangen, Germany). For MR-angiography, a Flash 3D sequence was utilized following injection of 5 mL diluted gadodiamide (Omniscan; Amersham Buchler, Braunschweig, Germany) via the arterial access. Two maximum intensity projections (MIP) were used as road maps and localizer for the interactive positioning of a continuously running 2D-FLASH sequence with a temporal solution of 2 images per second. During the intervention, an MR compatible monitor provided the image display inside the scanner room. Safety guidelines were followed during imaging in the presence of a conductive guidewire. The lesion was crossed by a commercially available balloon catheter (Wanda, Boston Scientific; Ratingen, Germany), which was mounted on a 0.035" guidewire (Terumo; Leuven, Belgium). The visibility was provided by radiopaque markers embedded in the balloon and was improved by injection of 1 mL gadodiamide into the balloon. After dilation, the result was checked by intraarterial MR angiography and catheter angiography., Results: The stenoses could be correctly localized by intraarterial MR angiography. There was complete correlation between intraarterial MR angiography and digital subtraction angiography. The combination of guidewire and balloon was visible and the balloon was placed correctly to cover the entire stenoses. Balloon dilation reduced the degree of stenosis about 45 % on average. A prolonged dilation was necessary in one patient due to a relevant residual stenosis, which was recognized by intraarterial MR angiography., Conclusion: MR-guided balloon dilatation of femoral and popliteal artery stenoses supported by real time imaging and intraarterial MR angiography is feasible with commercially available materials in the above mentioned way.

Purpose: To compare the extent of susceptibility artifacts after metallic suture anchor implantation by analyzing 14 different MRI sequences., Materials and Methods: A metallic suture anchor was implanted in the central area of three glenoid porcine specimens. The specimens were imaged with a 1.5 T scanner using a protocol of 14 standard sequences including gradient echo, spin echo and turbo spin echo sequences with and without fat-saturation. Artifact size was measured for each specimen and sequence. The resulting mean artifact areas were determined for each type of sequence and the mean values of the three specimens compared., Results: Gradient echo-sequences produced significantly larger artifact areas than the spin echo and turbo spin echo sequences, whereby the artifacts of the 3D-gradient echo sequences were smaller than the artifacts of the 2D-gradient echo sequences. A turbo spin echo sequence with a high readout band width and a short effective echo time showed the best results. For the conventional spin echo sequence, a reduction in the echo time did not significantly decrease the artifact size. Spectral fat-saturation did not affect the area of the susceptibility artifact compared to the non-saturated sequence., Conclusion: Gradient echo sequences should not be used after metallic suture anchor repair. Turbo spin echo sequences showed a decrease in the artifact size compared to conventional spin echo sequences and should be performed with a short effective echo time and a high band width. Spectral fat- saturation did not increase the artifact size significantly.

Purpose: To evaluate artifacts of unexpended stents and to determine their exact position for MR-guided percutaneous transluminal angioplasty using real-time sequences., Materials and Methods: By using an in vitro model, 11 unexpended stents - 9 nitinol, 1 stainless steel, and 1 cobalt alloy - were investigated by MR. Each stent was studied in a vessel-phantom filled with saline solution. Imaging was performed using five different real-time sequences: fast low angle shot (Flash 2D), fast imaging with steady precession (true FISP, FISP, interactive true FISP) and segmented echo planar imaging (seg. EPI). Artifacts of the introducer system and the stent were calculated by four blinded radiologists (scale: 1 - artifacts, making an excellent contribution to visualization; 2 - artifacts, making mainly a contribution to visualization; 3 - artifacts, making no contribution to visualization). Furthermore, an evaluation of the visibility of the tip of the stent-catheter and the proximal and distal end of the stent was performed using a four-point scale (very good visibility to invisible)., Results: The artifacts of the introducer system and stent were rated best for Omnilink (1.3 +/- 0.47), Wallstent (1.6 +/- 0.5), Jostent (1.65 +/- 0.5) and Luminexx (1.65 +/- 0.5). The differences between Omnilink and Jostent as well as Omnilink and Luminexx were significant. A very good to good visibility of the catheter tip was observed with a mean of 1.7 +/- 0.66 for Omnilink followed by the Jostent (1.95 +/- 0.69), by the Wallstent(R) (2.1 +/- 0.72) and by Luminexx (2.5 +/- 1.14). Differences between Omnilink and Luminexx were significant. The visibility of the proximal and distal end of the stent was evaluated as very good to good in 4 stent catheters (Omnilink, Wallstent, Jostent, Luminexx). However, the differences between Omnilink and Jostent as well as between Omnilink and Luminexx, and between Wallstent and Luminexx were significant. For all evaluation criteria, the segmented EPI and the interactive true FISP were rated to be most suitable for visualization. There were no significant differences in the evaluation of these two sequences., Conclusion: Omnilink stent, Jostent, Wallstent, and Luminexx stent are suitable for MR-angioplasty due to their good visibility in MR. Segmented EPI- and a newly developed interactive true FISP-sequence enable an effective visualization of these stent-catheters.

In a period of 4 months, 10 patients were examined prospectively with intraarterial magnetic resonance (MR) angiography after digital subtraction angiography. Intraarterial MR angiography was performed with use of a 1.5-T MR imaging system. Contrast agent (gadodiamide) was injected with a conventional angiography catheter placed in the proximal abdominal aorta. The increase in vascular signal intensity was determined and the diagnostic value of the MR angiograms was scored according to a five-point scale by four investigators. The MR angiograms were judged good to excellent, and all were scored as diagnostic. In conclusion, this study shows that intraarterial MR angiography is feasible. Intraarterial MR angiography is appropriate to support MR-guided vascular intervention.

Purpose: To compare image quality of single-slice spiral CT (SSCT) and multislice spiral CT (MSCT) in the diagnosis and classification of calcaneal fractures and to present a rapid and precise algorithm for the classification system of Stuermer., Materials and Methods: In 102 patients with 124 calcaneal fractures, spiral CT was performed, in 82 cases as SSCT with a slice thickness (SD) of 3 mm, a table speed (TS) of 3 - 4 mm/rot and an increment of 1.5 mm. In 42 cases, patients were scanned using MSCT (SD of 1.25 mm, increment 0.8 mm). For these examinations, 2 different scan protocols were used, with a TS of 3.75 mm/rot in one group (n = 21) and a TS of 7.5 mm/rot in the other group (n = 21). The image quality of axial sections and reconstructed images was assessed on a scale from 1 to 5 (1 = very good; 5 = insufficient). The fractures were evaluated using a classification system according to Stuermer, which assigns three main groups (A/B/C) and three subtypes (1/2/3)., Results: MSCT had substantial advantages over SSCT with respect to scan time and image quality, especially for multiplanar reformatting (median 1.5 versus 4.0). TS showed no significant influence on the image quality. The standardized evaluation of the images enabled a classification of fractures within 5 minutes. All fractures could be assigned to the different types and subtypes. This classification system takes into account the severity of the fracture and the therapeutic approach. The most common type (90 of 124 fractures) were "joint depression" fractures (type C), which were treated by surgery in 92 %. Type A fractures were treated conservatively in 72 %., Conclusion: Spiral CT, especially MSCT, allows rapid diagnosis and precise classification of calcaneal fractures, achieved with high quality multiplanar reformatting. The presented classification in different fracture types and subtypes allows an adequate planning of therapy.

The position of the acetabular cup is of decisive importance for the function of a total hip replacement (THR). Using the conventional surgical technique, correct placement of the cup often fails due to a lack of information about pelvic tilt. With CT-based and fluoroscopically-assisted navigation procedures the accuracy of implantation has been significantly improved. However, additional radiation exposure, high cost and the increased time requirement have hampered the acceptance of these techniques. The present anatomical study evaluates the accuracy of an alternative procedure--image-free navigation. This method requires little extra effort, does not substantially delay surgery, and needs no additional imaging. Press-fit cups were implanted in 10 human cadaveric hips with the help of the image-free navigation system, and the position of the cups was checked intraoperatively with a CT-based navigation system and postoperatively by computed tomography. All cups were implanted within the targeted safe zone with an average inclination of 44 degrees (range 40 degrees-48 degrees, SABW 2.7 degrees) and an average anteversion of 18 degrees (range 12-24 degrees, SABW 4.1 degrees). Analysis of accuracy of the image-free navigation software revealed only a small, clinically tolerable deviation in cup anteversion and cup inclination in comparison with the CT-based navigation system and the post operative CT scans. The evaluated image-free navigation system appears to be a practicable and reliable alternative to the computer-assisted implantation of acetabular cups in total hip arthroplasty.

Rationale and Objectives: To assess the influence of injection rates and volumes on the arrival time of contrast material (CM) in the common carotid artery, the jugular vein and the resulting arterial-venous transit time. Additionally the relationship between injection parameters and the extent of a CM plateau was evaluated., Materials and Methods: In 60 patients a CM injection was necessary to investigate suspected cranial disease. All patients were prospectively assigned to 6 protocol groups with varying volumes of gadolinium dimeglumine (2, 10, 20 mL) and injection rates (0.5, 1, 2, 4 mL/s). Simultaneously to the CM injection, 50 repetitive transverse measurements (1/s) were acquired at the level of the common carotid artery. Based on the resulting signal-time curves, the arrival time of the contrast material in the common carotid artery and the jugular vein, the resulting arterial-venous transit time, the peak enhancement and the extent of a CM-plateau were calculated as a function of the injection parameters., Results: Smaller flow rates (0.5 mL/s) resulted in a longer arrival time in the common carotid artery (mean value 22,6 seconds +/- 2.3) and the jugular vein (mean value 32.6 seconds +/- 2.6) and resulted in longer arterial-venous transit time (mean value 10.1 second +/- 1.9). The volume showed no effect on these parameters. The peak arterial and venous signal intensity and a consistent CM-plateau after 50 seconds were dependent on the volume, but not on the injection rate., Conclusion: The injection rate showed an influence to the arrival time in the common carotid artery and the jugular vein and also to the arterial-venous transit time. The injected volume only affected the extent of the contrast plateau. A flow rate of 1 to 2 mL/s and a minimum of 20 mL gadolinium dimeglumine are recommended to achieve optimal image quality without venous overlay.

Purpose: A prospective study to assess the value of indirect magnetic resonance-arthrography (MR-Arthro) in the detection of lesions of the superior labrum (SLAP-lesions)., Materials and Methods: Unenhanced magnetic resonance imaging (MRI) and indirect MR-Arthro of the shoulder were performed in 35 patients (9 females and 26 males) with a history of acute or chronic shoulder disorder. The images of unenhanced MRI and indirect MR-Arthro were analyzed independently from each other for the occurrence of SLAP-lesions and the findings correlated with the arthroscopic results. For arthroscopy, MRI and MR-Arthro, the SLAP-lesions were categorized based on the classification system of Snyder., Results: SLAP-lesions were diagnosed by arthroscopy in 22 of 35 patients (63 %). 9 of the 22 lesions (41 %) were classified as type 1, 9 (41 %) as type 2, three (13.5 %) as type 3 and one (4.5 %) as type 4. Using unenhanced MRI sensitivity, specificity and accuracy in the detection of SLAP-lesions were calculated to be 73 %, 85 % and 77 %. Indirect MR-Arthro showed a sensitivity of 91 %, a specificity of 85 % and an accuracy of 89 %. Unenhanced MRI revealed correlation to the arthroscopic classification in 9 of 22 cases (41 %) and indirect MR-Arthro in 18 of 22 cases (82 %)., Conclusion: Indirect MR-Arthro is a non-invasive method which offers excellent sensitivity in the diagnosis of SLAP-lesions. It provides important preoperative informations with regard to the exact location and extent of a tear.

Early specific radiologic changes of rheumatoid arthritis can usually be detected in the hands and feet. Later stages of the disease process show a typical centripetal spread of the affected joints, i.e., shoulder, elbow, and knee. For prognostic assessment of cubital rheumatoid arthritis, conventional radiography still remains the gold standard. X-rays allow objective scoring and thus classification into standardized stages. A concentric destruction of the rheumatic joint as compared to deformity in the degenerative joint is the typical radiologic symptom to look for. For soft tissue assessment, ultrasound (US) should be the diagnostic tool of choice. Due to the thin surrounding soft tissue layer, as well as the advanced high-resolution technology, bony structures can also be well demonstrated in any plane. In the early arthritic stages, particularly the small changes, e.g., minimal erosions of the cortical area, are very well detectable by US. The use of "color" allows good evaluation of the synovial inflammatory status. Modern imaging methods such as computer- assisted tomography (CAT) scan and magnetic resonance imaging (MRI) are restricted to a few set indications and should not be chosen for routine examination. More invasive methods such as arthrography are no longer indicated for assessment of cubital rheumatoid arthritis.

Our objective was to compare a single-slice CT (SS-CT) scanner with a multi-slice CT (MS-CT) scanner in the depiction of osseous anatomic structures and fractures of the upper cervical spine. Two cervical spine specimens with artificial trauma were scanned with a SS-CT scanner (HighSpeed, CT/i, GE, Milwaukee, Wis.) by using various collimations (1, 3, 5 mm) and pitch factors (1, 1.5, 2, 3) and a four-slice helical CT scanner (LightSpeed, QX/i, GE, Milwaukee, Wis.) by using various table speeds ranging from 3.75 to 15 mm/rotation for a pitch of 0.75 and from 7.5 to 30 mm/rotation for a pitch of 1.5. Images were reconstructed with an interval of 1 mm. Sagittal and coronal multiplanar reconstructions of the primary and reconstructed data set were performed. For MS-CT a tube current resulting in equivalent image noise as with SS-CT was used. All images were judged by two observers using a 4-point scale. The best image quality for SS-CT was achieved with the smallest slice thickness (1 mm) and a pitch smaller than 2 resulting in a table speed of up to 2 mm per gantry rotation (4 points). A reduction of the slice thickness rather than of the table speed proved to be beneficial at MS-CT. Therefore, the optimal scan protocol in MS-CT included a slice thickness of 1.25 mm with a table speed of 7.5 mm/360 degrees using a pitch of 1.5 (4 points), resulting in a faster scan time than when a pitch of 0.75 (4 points) was used. This study indicates that MS-CT could provide equivalent image quality at approximately four times the volume coverage speed of SS-CT.

Purpose: The objective of this prospective study was to assess the value of the indirect MR arthrography (MR-AR) of the wrist in the detection of lesions of the TFCC., Material and Methods: Indirect MR-AR was performed in 45 patients (23 f/22 m) with unclear ulnar wrist pain. After i. v. injection of 0.1 mmol/kg Gd-DTPA and after a motion-phase of the wrist (15 minutes) MRI was performed in a coronal plane. We used a STIR-, a fatsaturated (fs) T1-SE and a 3D-DESS sequence. The images were evaluated by two radiologists using a consensus score. The lesions were assigned to the system of Palmer and correlated with arthroscopy., Results: Indirect MR-AR showed in 35 of 45 patients a lesion of the TFCC, but arthroscopy only revealed a defect in 32 cases. This means three false positive but no false negative assessments by MRI. Using this MRI protocol sensitivity and specificity in the detection of TFCC lesions were calculated as 100 % and 77 %. The accuracy was 93 %. Small degenerative changes of the fibres were most common (Palmer type II A). In trauma patients the ligaments usually showed tears near the insertion at the ulna (Palmer type I B). The sensitivity and specificity was 88 % and 95 % for evaluation of the scapho-lunate (SL) ligament, the accuracy was 93 %. Arthroscopy and MRI did not diagnose any rupture of the lunate-triquetral (LT) ligament., Conclusion: Indirect MR-AR is a non-invasive method with a high sensitivity in the evaluation of the TFCC and associated injuries. Therefore, it is an excellent screening procedure to assess the indication for therapeutic arthroscopy.

Purpose: To evaluate contrast enhanced magnetic resonance angiography (ceMRA) of the pelvic and peripheral arteries with a dedicated peripheral vascular coil system and automated table-feed technique in patients with arterial occlusive disease., Methods: Three-dimensional gadolinium-enhanced MR angiography in a two-step automatic table feed technique was performed in 45 patients using a 1.5 Tesla imager (Magnetom Symphony, Siemens). The pelvic arteries were imaged with a single injection of contrast material. The upper and the lower leg were imaged with a second injection of contrast material in an automated table feed technique using a dedicated vascular coil system. In 20 patients ceMRA was compared with digital subtraction angiography (DSA) as the standard of reference and in 25 patients ceMRA was performed solely., Results: Sensitivity and specificity for grading significant stenoses > or = 50% and occlusions (in parenthesis) were in the pelvic arteries 94.7%, 96.8%, (100%, 100%), in the arteries of the upper leg 92.3%, 93.3% (87.5%, 100%) and in the arteries of the lower leg 96.5%, 95.8%, (95.2%, 96.8%), respectively. Depiction of the runoff vessels of the lower leg was excellent in ceMRA. CeMRA was of diagnostic quality in all the patients., Conclusion: Contrast-enhanced MRA using a dedicated peripheral vascular coil system increases the diagnostic quality of the lower leg. The runoff vessels can be evaluated. Thus, ceMRA in the presented technique is a diagnostic alternative to arterial angiography.

In this study aerobic-thermophilic fermentation of untreated liquid pig manure was examined for the potential of inactivating pathogenic microorganisms. As microbial tracer organisms, Salmonella typhimurium DT 104 and Escherichia coli were used. An effective reduction of survival of these microorganisms could be demonstrated by aerobic fermentation at temperatures of 50 degrees C for at least 3 h. However, these optimal process conditions without the need of additional heating, can only be achieved by microbial substrate reduction. In contrast to the impact of temperature on hygienization processes, alteration of the pH value which occurs during fermentation had no or little influence on the tenacity of the tracer bacteria. Even under mesophilic reaction conditions the influence of the pH value was not measurable. A technical realisation of such an aerobic-thermophilic fermentation process for prophylactic disinfection is questionable since a large technical expenditure is necessary to control ammonia emission. Effective partial reduction of nitrogen, phosphate, and free carbon in liquid manure requires retention times of at least 48 h. However, thermophilic reaction conditions may ensure an effective hygienization of the final fermentation products.

Purpose: To compare digital X-ray, CT, and MRI in the evaluation of ligamentous and osseous lesions in upper cervical spine specimens after artificial craniocervical injury with the findings of macroscopic preparation., Materials and Methods: A rotation trauma of defined severity was applied to 19 human corpses. After dissection of the neck specimens, digital X-ray (DIMA Soft P41, Feinfocus), conventional and helical CT (CTi, High Speed, GE, collimation 1 mm; pitch 1.0), and MRI were performed from the skull base to C3. The findings were correlated with the macroscopic results of preparation. MR (Magnetom Vision, Siemens) imaging was obtained with a 1.5 T system using 2D- and 3D-sequences., Results: Preparation revealed 6 fractures of the vertebral bodies, 5 fractures of the dens axis, 1 fracture of the arcus anterior of the atlas, 4 osseous flakes at the occipital condylus, and 6 lesions of the alar ligaments. Digital radiography showed all fractures and 4 osseous flakes at the occipital condylus. With conventional and helical CT, all fractures and all ruptured alar ligaments could be detected. 2D MRI depicted 9 of the fractures and 3D MRI showed fractures. With 2D MRI, 2 of the 4 osseous flakes at the condylus could be detected and with 3D MRI one occipital condylus fracture could be depicted. Ligamentous injuries were visualized by 2D MRI in 2 of 6 cases and by 3D MRI in one case., Conclusions: In post-mortem studies, CT was superior to MRI in the visualization of osseous and ligamentous injuries after trauma of the upper cervical spine. However, these results are not transferable to patients with rotation injury in general.

In the performance of conventional nuclear pharmacy work, personnel usually receive the highest hand radiation dose during reconstitution of 99Tcm-labelled radiopharmaceuticals. This study was conducted to compare the hand radiation doses incurred during the preparation of 99Tcm-labelled radiopharmaceuticals using three different reconstitution procedures: (1) the standard reconstitution method (i.e. withdrawing 99Tcm activity and normal saline [NS] into the same syringe before adding to the cold kit) (standard); (2) an alternative reconstitution procedure using two syringes to add normal saline separately before 99Tcm activity to the cold kit (NS/Tc); and (3) a standard reconstitution procedure using a robotic system (Amercare Syringe Fill Station, model NuMed SFS 3a, Amercare Ltd, Oxon, UK) (robot). Radiation doses were monitored by thermoluminescent dosimeters (Landauer Inc., Glenwood, IL, USA) on the base of the fourth finger (i.e. ring finger) of the non-dominant hand and on the mid-portion of the second finger (i.e. index finger) of the dominant hand. Three sets of ring badges were measured for each procedure, with 10 stimulated or real reconstitutions per set. Two different radiopharmaceutical kits were evaluated: 99Tcm-MDP, as it is the most frequently used radiopharmaceutical in the majority of nuclear medicine departments (all three reconstitution methods; i.e. standard, NS/Tc and robot), and 99Tcm-sestamibi, as it is not only reconstituted with the highest amount of radioactivity but is also the most frequently dispensed radiopharmaceutical in our laboratory (standard and robot). All kits were prepared from an elution vial containing a standardized amount of 99Tcm activity (i.e. 104.4 +/- 3.6 GBq). To each of the cold MDP and sestamibi kits, 20.7 +/- 1.2 GBq and 44.2 +/- 0.7 GBq of 99Tcm activity were added, respectively. Average accumulated radiation doses for 10 reconstitutions to the fingers (non-dominant/dominant) for the preparations of 99Tcm-MDP were as follows: 14.2 +/- 0.9 mSv/2.8 +/- 0.8 mSv (standard), 10.0 +/- 0.6 mSv/2.7 +/- 0.2 mSv (NS/Tc), and 0.6 +/- 0.1 mSv/1.3 +/- 0.1 mSv (robot). For 99Tcm-sestamibi, the average accumulated radiation doses for 10 reconstitutions to the fingers (non-dominant/dominant) were 6.7 +/- 0.7 mSv/4.6 +/- 0.5 mSv (standard) and 1.1 +/- 0.1 mSv/3.1 +/- 0.4 mSv (robot). When compared to the standard reconstitution method, our results show that the NS/Tc method slightly reduced radiation dose to the non-dominant hand, without any significant reduction for the dominant hand. However, the robot has proved to be the most effective method to considerably reduce radiation dose to both hands. A robotic system should be a useful ALARA (as low as reasonably achievable) tool to prepare other high-activity 99Tcm-labelled radiopharmaceuticals, as well as therapeutic and PET radiopharmaceuticals.

Adding normal saline (NS) separately before 99Tcm-sodium pertechnetate to MDP cold kits has been shown to reduce substantially the radiation dose to the hand. A similar dose reduction will probably prove to be valid with the preparation of most other 99Tcm-labelled radiopharmaceuticals. However, it is unknown how this altered reconstitution procedure may affect the labelling efficiency and in vitro stability of the 99Tcm-labelled radiopharmaceuticals. We have evaluated the effects on the labelling efficiency and in vitro stability of 99Tcm-labelled MDP, mertiatide and sestamibi reconstituted with three different methods: adding normal saline before 99Tcm activity (NS/Tc); adding 99Tcm activity before normal saline (Tc/NS); and the standard reconstitution method of adding both 99Tcm activity and normal saline together. The labelling efficiency and in vitro stability were evaluated by measuring the radiochemical purity of each radiopharmaceutical tested at 0, 1, 3, 6, 12 (except 99Tcm-MDP) and 24 h after reconstitution. For 99Tc-mertiatide, there was a very slight difference in the labelling efficiency, mostly due to the Tc/NS method being approximately 0.29% lower across time post-reconstitution than the standard method. For 99Tcm-labelled MDP and sestamibi, there were no differences between the three methods in terms of labelling efficiency and in vitro stability. In conclusion, both alternative methods (i.e. NS/Tc and Tc/NS) appear not to have any detrimental effect on the labelling efficiency and in vitro stability of the 99Tcm-labelled radiopharmaceuticals that we tested. However, of the two alternative kit reconstitution methods, we recommend the NS/Tc method, since it may reduce the hand radiation dose.

A previous method for determination of the radiochemical purity (RCP) value of [125I]sodium iothalamate uses two paper strips and solvents (total developing time is approximately 2.5 h). To simplify and shorten the RCP testing procedure, our laboratory has developed a single-strip chromatography method that not only distributes free 125I and [125I]sodium iothalamate to different relative front (Rf) locations, but is also faster and easier to perform. RCP of [125I]sodium iothalamate was determined with the use of a 10-cm instant thin-layer chromatography strip impregnated with polysilicic acid gel (ITLC-SA) as the solid phase, and a mobile phase of 2-butanol:acetic acid:water (140:2.5:70, v/v). By using autoradiography and counting the strip segments in a gamma counter, our results indicated that free 125I migrated to Rf = 0.89-1.00 while the [125I]sodium iothalamate moved to Rf = 0.44-0.67. The total developing time for the single-strip ITLC-SA system was approximately 1 h.

Our nuclear pharmacy has reported that a failed radiochemical purity (RCP) (i.e., RCP < 90%) of 99mTc-sestamibi may be associated with the use of a first elution at later stages from a long-ingrowth time (i.e., > or = 72 h) wet-column generator. The primary purpose of this study was to evaluate the effects of 99mTc eluates from wet- and dry-column generators on the RCP of 99mTc-sestamibi under the above conditions. RCP values were found to be measurably higher and kit failure rates lower with the use of dry-column generator eluate. Using a dry-column generator eluate, Cardiolite kits were prepared with 11.10 GBq of 99mTc at 3, 4, and 5 h postelution and 5.55 GBq at 6, 10, 11, and 12 h postelution. Our data suggest that when 11.10 GBq of 99mTc from a dry-column generator with > or = 72-h ingrowth was used to prepare 99mTc-sestamibi, kit failure started to occur using 99mTc eluate at approximately 4 h postelution. When 5.55 GBq was used to reconstitute the kit, RCP failure began to occur using 99mTc eluate approximately 10 h postelution and wet-column generators; the failure rate can be reduced even further by avoiding the addition of high activities of 99mTc and long elution times.

Using malondialdehyde (MDH) as an indicator of lipid peroxidation it was examined, whether oxygen radicals could be an origin of freeze-induced weakness of HES-cryopreserved erythrocytes. Each of 11 erythrocyte suspensions (Hct = 40; HES 200,000/0.62/12.5%; 60 mmol NaCl) was separated into 40 ml samples, cooled down to -196 degrees C und stored at -80 degrees C, finally. Samples were thawed after 1, 2, 3 und 6 months storage and besides that, one sample having remained at -196 degrees C (LN2). The MDH content (1.5 mumol/l Ery unwashed; 0.4 mumol/l Ery washed) amounted to 3.4 mumol/l Ery after LN2 storage, to 4 mumol/l Ery after 1 und to 8 mumol/l Ery after 6 months at -80 degrees C. Similarly, the MDH generation rate at -80 degrees C increased with storage time. The membrane fragility (1 in freshly drawn erythrocytes; 1.3 in erythrocytes out of LN2) rose from 1.6 after 1 month to 2.4 after 6 months. MDH content and membrane fragility were correlated linearly (r = 0.98). It is concluded that increased superoxide formation is mediated by freezed-induced oxidation of Hb-bound Fe. This allows peroxidation of membrane lipids which in consequence causes hemolysis.

Our nuclear pharmacy noted that 99mTc-sestamibi kits sometimes failed radiochemical purity (RCP) testing (i.e., RCP < 90%). All failed kits had been prepared with eluate from a newly arrived generator (ingrowth time > or = 72 h) which had been eluted > or = 6 h before the kit failure. The effects of 99mTc activity and eluate volume were then investigated to help explain the reason for the low RCP values. Our results demonstrated that higher failure rates of the 99mTc-sestamibi kits were noted when higher activities of 99mTc eluates were added, and the higher failure rates of the kits were associated with lower RCP values. In addition, higher kit failure rate and lower RCP values of the 5.55-GBq kits at 12 h postelution in comparison with the 11.1-GBq kits at 6 h (same eluate volume) indicated that the 99mTc activity and volume had a less detrimental effect on the 99mTc-sestamibi kit preparation than the 99mTc eluate age. The kit failures might be explained by the higher amount of 99mTc and the production of the free radicals during the long ingrowth time prior to generator elution. In conclusion, the use of a first elution from a long-ingrowth time generator at a later stage (i.e., 11.1 GBq at 6 h and 5.55 GBq at 12 h postelution) in preparation of a 99mTc-sestamibi kit is associated with a high rate of kit failure and should therefore be avoided.

[125I]Sodium iothalamate can be prepared by the isotope-exchange method with the use of a contrast medium preparation (i.e. iothalamate sodium injection, USP, 80%). The initial isolation and purification of iothalamate from the contrast medium solution for radioiodination is tedious and time-consuming (i.e. 1 1/2 h for purification and overnight for drying). The new method uses iothalamic acid to replace iothalamate sodium injection as a starting material and reduces the heating time and multiple acid-washing steps during radioiodination to expedite the radiolabelling process. The radiochemical purity (RCP) of [125I]sodium iothalamate obtained from the new method was 98.9 +/- 1.3% (n = 30) versus RCP value of 99.2 +/- 1.0% (n = 25) from the old method with no significant differences between the two groups of RCP values. An RCP chromatographical system to separate and migrate the radiochemical species of [125I]sodium iothalamate from the origin is described in this paper.

The sequence analysis of five new field isolates of potato spindle tuber viroid (PSTVd) of different virulence revealed that the length of their RNA chain is not strictly conserved to 359 nucleotides (nts), as one could have inferred from the previously sequenced PSTVd strains. It was now found that the chain length is strain-specific like in the case of practically all other viroids, and that it may vary, so far, between 356 and 360 nts. Taking our previously sequenced and least virulent mild strain PSTVd KF6-M as standard, the new mild strains PSTVd WA-M and PSTVd F-M differ from it by one or two nts. The new intermediate-severe strains PSTVd F-IS and PSTV-F 88-IS differ from the standard mild strain by eight and nine nts, respectively, whereas the new severe-lethal strain PSTVd F-SL differs in seven nts. Most of these mutations are located within the virulence-modulating (VM) region and within the variable region (VR), and only in two strains a single mutation is found in the right terminal domain.

The gel formation by endotoxin with limulus amoebocyte lysate (LAL) solution requires the presence of free calcium ions. The chelating agents and radiopharmaceuticals prepared from the chelating agents always reduce the available free calcium levels present in the kits used for the testing of apyrogenicity and thus inhibit gel formation of LAL with E. Coli endotoxin (ET). This inhibition of gel formation could be reversed by the addition of excess free calcium ions or the excessive dilution of radiopharmaceuticals and chelating agents. The tests of positive control (0.2 ml ET units and LAL), inhibition control (0.1 ml sample, 0.1 ml ET and LAL), and negative control (0.1 ml sterile saline and LAL) were carried out with the fresh preparation (0.1 ml) of samples (triplicate), tropolone, ACD anticoagulant, and 99mTc-labeled radiopharmaceuticals. In the Ca-supplemented tests, 0.1 ml of 60 mM sterile calcium chloride solution was added to the test solutions and incubated for 60 min at 37 degrees centigrade. The results of gel formation (+ve and -ve) and normalization of inhibition control tests with Ca-supplement indicate that commercial LAL kits need extra calcium ions for the correct testing of the apyrogenicity of chelate-containing radiopharmaceuticals and chelating agents.

This study reports an evaluation of the impact of junior medical students on patient satisfaction, as expressed by the patients' parents, and on visit length in a hospital-based general pediatric clinic. Data were collected on a group of consecutive visits. One month later a random sample of the parents of these patients were interviewed to ascertain their attitudes toward the care of their children. Data gathered by these two methodologies were combined to yield an operational and attitudinal data set. Although patient visits with medical students were significantly longer than nonstudent encounters, the proportion of parents who expressed overall satisfaction with their child's visit was greater for visits involving medical students. Dissatisfaction with the amount of time spent generally increased with the length of the visit in both groups. A pattern emerged, however, which indicated that a larger proportion of parents whose children were involved in teaching encounters were satisfied with the visit overall than those not involved regardless of the visit length. The data suggest willingness on the part of parents to accept time costs associated with teaching in the program.

Each State Medicaid program is required by Federal Regulations to have a Medical Care Advisory Committee ( MCAC ) which includes provider, consumer, and government representatives and which participates in policy development and program administration. Data are presented about the composition of these committees, their structure, the administrative and financial support they receive, and the nature of their activities. It is argued that they can play an important role in policy formulation and implementation, but that they need to be reformed in order to exploit that potential.