Search

The reaction of [MoO(2)Cl(2)(bipy)] (1) (bipy = 2,2'-bipyridine) with water in a Teflon-lined stainless steel autoclave (100 degrees C, 19 h), in an open reflux system with oil bath heating (12 h) or in a microwave synthesis system (120 degrees C, 4 h), gave the molybdenum oxide/bipyridine hybrid material {[MoO(3)(bipy)][MoO(3)(H(2)O)]}(n) (2) as a microcrystalline powder in yields of 72-92%. The crystal structure of 2 determined from synchrotron X-ray powder diffraction data is composed of two distinct neutral one-dimensional polymers: an organic-inorganic polymer, [MoO(3)(bipy)](n), and a purely inorganic chain, [MoO(3)(H(2)O)](n), which are interconnected by O-H...O hydrogen bonding interactions. Compound 2 is a moderately active, stable, and selective catalyst for the epoxidation of cis-cyclooctene at 55 degrees C with tert-butylhydroperoxide (tBuOOH, 5.5 M in decane or 70% aqueous) as the oxidant. Biphasic solid-liquid or triphasic solid-organic-aqueous mixtures are formed, and 1,2-epoxycyclooctane is the only reaction product. When n-hexane is employed as a cosolvent and tBuOOH(decane) is the oxidant, the catalytic reaction is heterogeneous in nature, and the solid catalyst can be recycled and reused without a loss of activity. For comparison, the catalytic performance of the precursor 1 was also investigated. The IR spectra of solids recovered after catalysis indicate that 1 transforms into the organic-inorganic polymer [MoO(3)(bipy)] when the oxidant is tBuOOH(decane) and compound 2 when the oxidant is 70% aqueous tBuOOH.

The one-pot acid-catalysed conversion of mono/di/polysaccharides (inulin, xylan, cellobiose, sucrose, glucose, fructose, xylose) into 2-furfuraldehyde (FUR) or 5-hydroxymethylfurfural (HMF) in the presence of aluminium-containing mesoporous TUD-1 (denoted as Al-TUD-1, Si/Al = 21), at 170 degrees C was investigated. Xylose gave 60% FUR yield after 6 h reaction; hexose-based mono/disaccharides gave less than 20% HMF yield; polysaccharides gave less than 20 wt % FUR or HMF yields after 6 h. For four consecutive 6 h batches of the xylose reaction in the presence of Al-TUD-1, the FUR yields achieved were similar, without significant changes in Si/Al ratio.

The CeO2 nanorods (CeNR) promote the oxidation of ethylbenzene (PhEt) and cyclohexene with t-BuOOH, at temperatures as low as 55 degrees C. For both substrates the saturated C-H bonds are preferentially activated over the unsaturated ones. The catalyst seems fairly stable towards leaching phenomena. The liquid-phase oxidation catalysis may be associated with the Ce3+/Ce4+ inter-conversion in the one-electron redox processes mediating the formation of tert-butyl-(per)oxy radicals. CeNR is very effective in H2O2 disproportionation. Pre-treatment of CeNR with H2O2 or t-BuOOH prior to the catalytic reaction enhances the reaction rate of PhEt with t-BuOOH in comparison to CeNR. Textural characterization and spectroscopic studies suggest that catalytic activation is associated to defect sites.

The oxo-bridged dimer [Mo(2)O(4)(mu(2)-O)Cl(2)(pzH)(4)] (1; pzH = pyrazole) exhibits unusually high activity in the liquid-phase catalytic epoxidation of the cyclic olefins cyclooctene and (R)-(+)-limonene under mild conditions and in the absence of additional organic solvents, using tert-butyl hydroperoxide as the oxidant. The complex is stable under the reaction conditions and can be used in further catalytic runs without significant loss of performance. An X-ray crystallographic investigation reveals that 1 has an unprecedented and extremely rare all-cis configuration at each of the MoO(2)-(mu(2)-O)Cl(pzH)(2) cores, which can be understood by considering supramolecular contacts and geometric factors.

Cesium salts of 12-tungstophosphoric acid, Cs(x)H(3-x)PW(12)O(40) (Cs(x)PW), in the bulk form or supported on medium-pore MCM-41 (3.7 nm) or large-pore (9.6 nm) micelle-templated silicas are active solid acid catalysts for the cyclodehydration of xylose into furfural, in a toluene/water solvent system (T/W) or in dimethyl sulfoxide (DMSO). The catalytic results are comparable to those obtained using sulfuric acid, under similar reaction conditions. The initial activities increase in the order H(3)PW(12)O(40)

The tetrahedral triphenylsiloxy complex MoO(2)(OSiPh(3))(2) (1) and its Lewis base adduct with 2,2'-bipyridine, MoO(2)(OSiPh(3))(2)(bpy) (2), were prepared and characterised by IR/Raman spectroscopy, and thermogravimetric analysis. Both compounds catalyse the epoxidation of cis-cyclooctene at 55 degrees C using tert-butylhydroperoxide (t-BuOOH) is decane as the oxidant, giving 1,2-epoxycyclooctane as the only product. The best results were obtained in the absence of a co-solvent (other than the decane) or in the presence of 1,2-dichloroethane, while much lower activities were obtained when hexane or acetonitrile were added. With no co-solvent, catalyst 1 (initial activity 272 mol x molMo(-1) x h(-1)for a catalyst:substrate: oxidant molar ratio of 1:100:150) is much more active than 2(initial activity 12 mol x molMo(-1) x h(-1)). The initial reaction rates showed first order dependence with respect to the initial concentration of olefin. With respect to the initial amount of oxidant, the rate order dependence for 1 (1.9) was higher than that for 2 (1.6).The dependence of the initial reaction rate on reaction temperature and initial amount of catalyst was also studied for both catalysts. The lower apparent activation energy of 1 (11 kcal x mol(-1)) as compared with 2 (20 kcal x mol(-1)) is in accordance with the higher activity of the former.

A Zn,Al layered double hydroxide (LDH) with Zn/Al = 1.45 and containing nitrate anions was prepared by coprecipitation and characterized by powder X-ray diffraction, Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS), thermogravimetric analysis, FTIR and FT Raman spectroscopy, and (27)Al MAS NMR spectroscopy. Three Zn...O and four Zn...M (M = Zn, Al) shells could be fitted to the low-temperature (40 K) EXAFS spectrum, in accordance with a model for an ordered cationic sheet. The nitrate anions were easily exchanged by 2,2'-bipyridine-5,5'-dicarboxylate anions, resulting in an increase in the basal spacing from 9 to 18 A. The basal spacing of the pillared derivative indicates that the anions are arranged with their longest dimension nearly perpendicular to the host layers. This material exhibits a high encapsulating ability, as evidenced by its interaction with a dichloromethane solution of the dioxomolybdenum(VI) complex MoO(2)Cl(2)(THF)(2). A material with a metal loading of 11.2 wt % was obtained. Molybdenum K-edge EXAFS analysis could not substantiate the formation of a supported complex of the type MoO(2)Cl(2)(N-N) but instead indicated the formation of unidentate-bridged entities of the type [O(2)Mo-O-MoO(2)] with a metal-metal separation of 3.29 A. The molybdenum-containing LDH was active as a catalyst for the liquid-phase epoxidation of cis-cyclooctene, 1-octene, and trans-2-octene using tert-butyl hydroperoxide as the oxygen source, yielding the corresponding epoxides as the only products. For reactions carried out with no additional solvent (other than n-decane) or in the presence of 1,2-dichloroethane, the solid catalyst could be recycled with no major loss of activity. Other tests confirmed that the systems functioned as true heterogeneous catalysts.

Mo K-edge XAFS spectra have been measured for ordered mesoporous silica MCM-41 grafted with the complexes [MoO2X2(thf)2] (X=Cl, Br). For grafting reactions in the absence of triethylamine, materials with 1 wt. % Mo are obtained; the Mo K-edge EXAFS results indicate the co-existence of isolated surface-fixed monomeric species [MoO2[(-O)3SiO]2(thf)(n)] and [MoO2[(-O)3SiO]X(thf)(n)]. When Et3N is used in the grafting reactions, materials with 4 wt. % Mo are obtained. The EXAFS data for the material prepared using [MoO2Cl2(thf)2] and Et3N indicate the presence of dinuclear species with two Mo(VI) centres, each with two Mo=O groups and each linked by one or two oxo bridges (Mo...Mo 3.27 A). The molybdenum centres in the material prepared using the dibromo complex comprise mainly isolated four-coordinate dioxomolybdenum(VI) and trioxomolybdenum(VI) monomeric species, with a small contribution from dimeric species. All materials were further characterised in the solid state by powder X-ray diffraction, N2 adsorption analysis, MAS NMR (13C, 29Si) and FTIR spectroscopy. The derivatised MCMs perform differently as catalysts in the liquid-phase oxidation of various olefins and alcohols with tert-butyl hydroperoxide. The highest alkene epoxidation activity was recorded for the catalysts with low metal loading, whereas the material containing oxo-bridged dimers had the highest activity for oxidation of alcohols. The recyclability of all the catalysts was tested: the catalytic activity of the derivatised materials tended to stabilize with ageing.

The organotin-oxomolybdates [(R(3)Sn)(2)MoO(4)].n H(2)O (R=methyl, n-butyl, cyclohexyl, phenyl, benzyl) have been prepared and tested as catalysts for the oxidation of benzothiophene with aqueous hydrogen peroxide, at 35 degrees C and atmospheric pressure. In all cases, the 1,1-dioxide was the only observed product. The kinetic profiles depend on the nature of the tin-bound R group and also on the addition of a co-solvent. For the tribenzyltin derivative, the apparent activation energies for sulfoxidation as a function of the co-solvent are in the order 1,2-dichloroethane (5 kcal mol(-1))