Search

The spatial nonuniformity of a radiometric calibration source is key to its performance, uncertainty budget, and utility. Multiple disparate approaches are currently used to assess nonuniformity; thus, it is critical to understand how nonuniformity is calculated when comparing radiometric calibration sources. Two factors are key in assessing nonuniformity: (1) the methodology chosen to calculate the nonuniformity and (2) how the intensity of the light is sampled. Here, we present and compare different methodologies of calculating spatial nonuniformity. In general, we find that these methods can be categorized into two groups: those in which the equations assume a Gaussian population distribution and those in which the equations can be applied to any shape of distribution. Additionally, we compare different methods of sampling the light intensity within the region of interest. We show that peak deviation nonuniformity analysis, in which the pixels of the image of the illumination source are resampled into 69 equally sized bins encompassing the region of interest, can be used to effectively assess the nonuniformity of any radiance distribution. Furthermore, the nonuniformity determined by this method allows for an accurate comparison to industry standard nonuniformity metrics.

Small gas-phase clusters (ion pairs) of the ionic liquid [emim](+)[Tf2N](-) have been generated in a supersonic expansion. Clusters are investigated via UV photofragmentation and time-of-flight mass spectrometry. Spectra between 42,000 and 45,000 cm(-1) reveal dynamical branching between direct dissociation of the ion pair to the cation and anion and to radical species. The IR spectrum between 2800 and 3200 cm(-1) was measured by action spectroscopy. Multiple conformations of the ion pair are found to be present in the molecular beam, leading to broad spectral features, further complicated by hydrogen bonding and Fermi resonances. The measured and theoretical spectra compare well, and the jet-cooled ion pair structures present in the molecular beam are strongly hydrogen bonded "stacked" conformers.

We describe a method to obtain absolute vibrational excitation probabilities of molecules scattering from a surface based on measurements of the rotational state, scattering angle, and temporal distributions of the scattered molecules and apply this method to the vibrational excitation of NO scattering from Au(111). We report the absolute excitation probabilities to the v = 1 and v = 2 vibrational states, rotational excitation distributions, and final scattering angle distributions for a wide range of incidence energies and surface temperatures. In addition to demonstrating the methodology for obtaining absolute scattering probabilities, these results provide an excellent benchmark for theoretical calculations of molecule-surface scattering.

Surface phenomena: measurements of absolute probabilities are reported for the vibrational excitation of NO(v=0→1,2) molecules scattered from a Au(111) surface. These measurements were quantitatively compared to calculations based on ab initio theoretical approaches to electronically nonadiabatic molecule-surface interactions. Good agreement was found between theory and experiment (see picture; T(s) =surface temperature, P=excitation probability, and E=incidence energy of translation)., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Kapton polyimde is extensively used in solar arrays, spacecraft thermal blankets, and space inflatable structures. Upon exposure to atomic oxygen in low Earth orbit (LEO), Kapton is severely eroded. An effective approach to prevent this erosion is to incorporate polyhedral oligomeric silsesquioxane (POSS) into the polyimide matrix by copolymerizing POSS monomers with the polyimide precursor. The copolymerization of POSS provides Si and O in the polymer matrix on the nano level. During exposure of POSS polyimide to atomic oxygen, organic material is degraded, and a silica passivation layer is formed. This silica layer protects the underlying polymer from further degradation. Laboratory and space-flight experiments have shown that POSS polyimides are highly resistant to atomic-oxygen attack, with erosion yields that may be as little as 1% those of Kapton. The results of all the studies indicate that POSS polyimide would be a space-survivable replacement for Kapton on spacecraft that operate in the LEO environment.

The Born-Oppenheimer Approximation (BOA) forms the basis for calculating electronically adiabatic potential energy surfaces, thus providing the framework for developing a molecular level understanding of a variety of important chemical problems. For surface chemistry at metal surfaces, it is now clear that for some processes electronically nonadiabatic effects can be important, even dominant; however, the magnitude of BOA breakdown may vary widely from one chemical system to another. In this paper we show that molecular-beam surface scattering experiments can be used to derive quantitative information about the magnitude of BOA breakdown. A state-to-state rate model is used to interpret the pre-exponential factor of the well-known Arrhenius surface temperature dependence of the electronically nonadiabatic vibrational excitation. We also show that reference to a "thermal limit" provides a quick and simple rule of thumb for quantifying BOA breakdown. We demonstrate this approach by comparing electronically nonadiabatic vibrational inelasticity for NO(ν = 0 → 1) to NO(ν = 15 →ν'≪ 15) and show that the electronically nonadiabatic coupling strengths are of a similar magnitude. We compare experiments for NO and HCl scattering from Au(111) and derive the quantitative relative magnitude for the electronically nonadiabatic influences in each system. The electronically nonadiabatic influences are 300-400 times larger for NO than for HCl, for incidence energies near 0.9 eV., (This journal is © the Owner Societies 2011)

Here we extend a recently introduced state-to-state kinetic model describing single- and multi-quantum vibrational excitation of molecular beams of NO scattering from a Au(111) metal surface. We derive an analytical expression for the rate of electronically non-adiabatic vibrational energy transfer, which is then employed in the analysis of the temperature dependence of the kinetics of direct overtone and two-step sequential energy transfer mechanisms. We show that the Arrhenius surface temperature dependence for vibrational excitation probability reported in many previous studies emerges as a low temperature limit of a more general solution that describes the approach to thermal equilibrium in the limit of infinite interaction time and that the pre-exponential term of the Arrhenius expression can be used not only to distinguish between the direct overtone and sequential mechanisms, but also to deduce their relative contributions. We also apply the analytical expression for the vibrational energy transfer rates introduced in this work to the full kinetic model and obtain an excellent fit to experimental data, the results of which show how to extract numerical values of the molecule-surface coupling strength and its fundamental properties.

We report high resolution state-to-state time-of-flight (TOF) measurements for scattering of HCl(v=2, J=1) from a Au(111) single crystal surface for both vibrationally elastic (v=2-->2) as well as inelastic (v=2-->1) channels at seven incidence energies between 0.28 and 1.27 eV. The dependences of the TOF results on final HCl rotational state and surface temperature are also reported. The translational energy transferred to the surface depends linearly on incidence energy and is close to the single surface-atom impulse (Baule) limit over the entire range of incidence energies studied. The probability of vibrational relaxation is also large. For molecules that relax from v=2 to v=1, the fraction of vibrational energy that is transferred to the surface is approximately 74%. We discuss these observations in terms of an impulse approximation as well as the possible role of translational and vibrational excitations of electron-hole pairs in the solid.

Gas-phase H/D exchange is widely used for characterizing the structure of ions. However, many structural parameters that affect the rate of H/D exchange are poorly understood, which complicates the interpretation of experimental data. Here, the effects of sodium ion adduction on the rate of H/D exchange with D2O for a series of peptides and peptide dimers with varying numbers of acidic residues are described. The maximum number of sodium ion adducts that can be accommodated by the peptides and peptide dimers in this study is N + 1, where N is the number of free carboxylic acid groups. The formation of methyl-esters at all carboxylic acid groups, or the replacement of all the acidic hydrogens with sodium ions, effectively shuts down H/D exchange with D2O. In contrast, both the rate and the extent of H/D exchange with D2O are increased for most of the peptides and peptide dimers by the adduction of an intermediate number of sodium ions. These results are consistent with the H/D exchange occurring via a salt-bridge mechanism and show that the presence of two carboxylic acid groups is much better than one. The results with peptide dimers also indicate that surface accessibility may not be a dominant factor in the extent of H/D exchange for these ions.

Background: We sought to assess whether GFS, a proprietary preparation of Tasmanian Undaria pinnatifida, has effects on healing or re-emergence of Herpetic infections, and additionally, to assess effects of GFS in vitro. Undaria is the most commonly eaten seaweed in Japan, and contains sulphated polyanions and other components with potential anti-viral activity. Herpes simplex virus type 1 (HSV-1) infections have lower reactivation rates and Herpes type 2 (HSV-2) infections have lower incidence in Japan than in the west., Methods: Patients with active (15 subjects) or latent (6 subjects) Herpetic infections (HSV-1, 2, EBV, Zoster) were monitored for response to ingestion of GFS. GFS extract was tested in vitro for human T cell mitogenicity and anti-Herpes activity., Results: Ingestion of GFS was associated with increased healing rates in patients with active infections. In addition, patients with latent infection remained asymptomatic whilst ingesting GFS. GFS extract inhibited Herpes viruses in vitro and was mitogenic to human T cells in vitro., Conclusions: Ingestion of GFS has inhibitory effects on reactivation and is associated with increased rate of healing after Herpetic outbreaks. GFS extract potently inhibited Herpes virus in vitro, and had mitogenic effects on human T cells.