Search

A two-step electrochemical surface treatment has been developed to modify the CP Ti surface on commercially pure titanium grade 2 (CP Ti): (1) anodic oxidation to form TiO 2 nanotube precoatings loaded with silver (Ag) and (2) microarc oxidation (MAO) to produce a porous Ca-P-Ag coating in an electrolyte containing Ag, Ca, and P. One-step MAO in the same electrolyte has also been used to produce porous Ca-P-Ag coatings without anodic oxidation and preloaded Ag as a control. Surface morphologies and alloying chemistry of the two coatings were characterized by SEM, EDS, and XPS. Biocompatibility and antimicrobial properties have been evaluated by the MTT method and co-culture of Staphylococcus aureus , respectively. It is demonstrated that porous coatings with high Ag content can be achieved on the CP Ti by the two-step treatment. The optimized MAO voltage for excellent comprehensive properties of the coating is 350 V, in which a suitable chemical equilibrium between Ag, Ca, and P contents and a Ca/P ratio of 1.67 similar to HA can be obtained, and the Ag particles are in the size of less than 100 nm and embedded into the underneath of the coating surface. After being contacted with S. aureus for 1 and 7 days, the average bactericidal rates were 99.53 and 89.27% and no cytotoxicity was detected. In comparison, the one-step MAO coatings contained less Ag, had a lower Ca/P ratio, and showed lower antimicrobial ability than the two-step treated samples.

Background: The biofunctionalization of titanium implants for high osteogenic ability is a promising approach for the development of advanced implants to promote osseointegration, especially in compromised bone conditions. In this study, polyelectrolyte multilayers (PEMs) were fabricated using the layer-by-layer approach with a chitosan-miRNA (CS-miRNA) complex and sodium hyaluronate (HA) as the positively and negatively charged polyelectrolytes on microarc-oxidized (MAO) Ti surfaces via silane-glutaraldehyde coupling., Methods: Dynamic contact angle and scanning electron microscopy measurements were conducted to monitor the layer accumulation. RiboGreen was used to quantify the miRNA loading and release profile in phosphate-buffered saline. The in vitro transfection efficiency and the cytotoxicity were investigated after seeding mesenchymal stem cells (MSCs) on the CS-antimiR-138/HA PEM-functionalized microporous Ti surface. The in vitro osteogenic differentiation of the MSCs and the in vivo osseointegration were also evaluated., Results: The surface wettability alternately changed during the formation of PEMs. The CS-miRNA nanoparticles were distributed evenly across the MAO surface. The miRNA loading increased with increasing bilayer number. More importantly, a sustained miRNA release was obtained over a timeframe of approximately 2 weeks. In vitro transfection revealed that the CS-antimiR-138 nanoparticles were taken up efficiently by the cells and caused significant knockdown of miR-138 without showing significant cytotoxicity. The CS-antimiR-138/HA PEM surface enhanced the osteogenic differentiation of MSCs in terms of enhanced alkaline phosphatase, collagen production and extracellular matrix mineralization. Substantially enhanced in vivo osseointegration was observed in the rat model., Conclusions: The findings demonstrated that the novel CS-antimiR-138/HA PEM-functionalized microporous Ti implant exhibited sustained release of CS-antimiR-138, and notably enhanced the in vitro osteogenic differentiation of MSCs and in vivo osseointegration. This novel miRNA-functionalized Ti implant may be used in the clinical setting to allow for more effective and robust osseointegration.

There has been a constant requirement from the clinic to develop biomedical titanium (Ti) implants with high osteogenic ability. In this study, we clarified a novel mechanism of how MAO (microarc oxidation) coating of Ti implants facilitates osteogenic differentiation of human bone marrow mesenchymal stem cells (hB-MSCs) by activating ERK1/2-miR-1827-Osterix signaling pathway in vitro. MAO surface of titanium implant was more favorable to promote osteogenic differentiation than SLA and AOS coating. Besides, titanium implants regulated hB-MSCs osteogenesis through the p38 MAPK pathway and ERK1/2 might be the most efficient target. Furthermore, MAO coating induced osteogenic differentiation though ERK1/2-miR-1827 pathway. Finally, we verified miR-1827 regulated osteogenic differentiation partially through Osterix. Our study reveals novel insights that MAO surface of titanium implant is a prior choice for biomedical trial and for its use in periprosthetic osteolysis (PIO) treatment in an evidence-based rationale.

In this study, a porous Ti-alloy based implant with an interconnected channel structure (MAO-CaP-BMP2) is fabricated using a method combining 3D printing, microarc oxidation (MAO) treatment, and co-precipitation of Ca,P layer with BMP-2 technique. The macroporous structure with pore size of 600 μm made by 3D printing not only enhances the ingrowth of cells but also allows the formation of blood vessels inside the implant. As a result, the new bond formation is promoted. In addition, the microporous dioxide layer formed on the implant surface by MAO provides the sites for co-precipitation of Ca,P layer with BMP-2. The microstructure allows the prolonged release of BMP-2. Our results show that a sustained release of BMP-2 over 35 days is achieved for MAO-CaP-BMP2 group longer than Ti without MAO modification group and without Ca,P electrochemical deposition group. The slow release of BMP-2 at the bone/implant interface for a long period of time leads to enhancement of the osseointegration between the implant and surrounding bones. This result indicates that MAO-CaP-BMP2 is a good candidate of growth factor carrier. Successful regeneration of bone requires the concomitant processes of osteogenesis and neovascularization. MAO-CaP-BMP2 modified Ti-alloy implant is both osteoinductive and osteoconductive which can create better osteogenesis and angiogenesis. As a result, it can enhance bone formation. • Controlled release of BMP-2 from titanium based implant • MAO-CaP-BMP2 modified Ti-alloy implant is both osteoinductive and osteoconductive. • BMP-2 at the bone/implant interface leads to enhancement of the osseointegration between the implant and surrounding bones. [ABSTRACT FROM AUTHOR]

Insulation of an electrode for use with an electrochemical machining (ECM) was achieved through hot-dip aluminizing and microarc oxidation techniques. To form an effective insulation layer on a stainless-steel substrate and achieve high precision in ECM, an electrode was processed through microarc oxidation, and the aluminum-rich layer was converted into an aluminum oxide insulating layer. The withstand voltage of the tool was evaluated through sodium chloride electrolysis, and the surface and cross-section were observed. The ECM performance of various tools with and without aluminum oxide insulating layer was examined by drilling on a stainless-steel workpiece. A precise and robust insulation layer must be produced. Precision can be achieved by reducing the stray effects of ECM. Experimental results indicated that the optimal parameters were aluminum dipping were 4 min, microarc voltage of 475 V for 10 min with a withstand voltage of 9.3 V. Electrochemical drilling was used to examine electrodes with and without an insulation layer. Improvement of variation between entrance and exit could be 64.58 %. The differences between the entrance and exit values indicated that the electrochemical insulating layer considerably reduces stray current and improves drilling accuracy. • The ECM electrode insulation layer could be fabricated by HDA and MAO on AISI304. • The HDAed Al layer was consumed as the ceramic layer grew in thickness during MAO. • The defects of ceramic will let the electron pass during ECM except denser layer. • The withstand voltage of the tool surface was proportional to alumina thickness. • The insulation layer greatly reduced stray current and improved drilling accuracy. [ABSTRACT FROM AUTHOR]

Recently, the problem of infection on implanted devices caused by the formation of biofilms has been recognized. Surface treatment to prevent the initial stages of bacterial adhesion and subsequent bacterial growth is the only possible solution against such infection. In this study, simple electrochemical treatment was used for introducing silver, an antibiotic agent, on the titanium surface. A porous oxide layer containing small amounts of silver was formed on the metal of the substrate. This was done by microarc oxidation using the electrolyte with silver nitrate. The porous oxide layer was almost amorphous with a small fraction of anatase phase. The samples prepared using the electrolyte containing 0.04 mM or a higher concentration of silver nitrate showed an excellent antibacterial effect against both E. coli and S. aureus . However, the proliferation of osteoblast-like cells in the samples was not affected when a concentration of 0.5 mM or lower was used. Moreover, samples containing silver showed no harmful effects on the process of bone differentiation. Furthermore, the calcification process of the cells on the samples treated with and without silver were more promoted than that on untreated Ti. Thus, we found that it is possible to use this optimum concentration of silver to realize the conflicting biofunctions: its antibacterial property and osteogenic cell compatibility.

An anticorrosive composite coating with enhanced corrosion resistance in acid, alkaline and salt solutions was fabricated by compounding micro- and nanoporous inorganic structure and organic corrosion inhibitor, which was used to improve the corrosion resistance of amphoteric metal and its oxides in various corrosive medium. Micro- and nanoporous structure was prepared by microarc oxidation (MAO) coatings on 2024 aluminium alloy, which was used both as the inorganic anticorrosion coating and the container for organic corrosion inhibitor (M16). Electrochemical impedance spectroscopy, Tafel plots and salt spray resistance were measured to research the anticorrosion performance of the MAO/M16 composite coating. Enhanced corrosion resistance was observed for the MAO/M16 coating compared to the MAO by itself. When the concentration of corrosion inhibitor M16 is at 2 w%, the best anticorrosive properties of the composite coating were obtained. Moreover, the MAO/M16 composite coating showed better corrosion-resistant performance than pure MAO coating and Al alloy substrate in the corrosion environment of 1 M HCl, 0.1 M NaOH and 3.5 w% NaCl solutions, respectively. The enhancement of corrosion resistance for MAO/M16 composite coating was achieved by a unique synergy between the microarc oxidation layer and the corrosion inhibitor. The composite coating indicates its promising applications in acid, alkaline and salt solutions environments and other harsh environments., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Magnesium and its alloys are biodegradable materials with great potential for biomedical development; however, their high rate of degradation in biological environments limits the widespread application of these materials. In order to improve the corrosion resistance of magnesium alloy, a functional calcium phosphate coating was prepared on Mg-3Zn-0.5Zr-0.5Sr alloy by microarc oxidation (MAO) combined with chemical deposition of fluoridated hydroxyapatite (FHA). A dense calcium-phosphorus coating 6 μm thick composed of needle-shaped fluoridated hydroxyapatite formed on the surface of the MAO layer. The MAO-FHA coating exhibited good mineralization ability to induce hydroxyapatite deposition on its surface during degradation testing in simulated bodily fluids.

Purpose: Treatment for an unstable intertrochanteric fracture in elderly patients is challenging. Bipolar hemiarthroplasty (HA) using microarc oxidation (MAO) coating has been a treatment option alternative to internal fixation. However, the outcome of bipolar HA using MAO-coated stem in these patients is unknown., Methods: From July 2007 to April 2016, 234 (older than 65 years) patients (234 hips) who were diagnosed as having unstable intertrochanteric fractures were treated with bipolar HA using a fully MAO-coated standard-length rectangular cementless stem. During the arthroplasty, the greater trochanteric and the medial fracture fragments were attached to the stem and fixed with two to three 16-gauge wires. Forty-eight patients (48 hips) died within postoperative 2 years. The remaining 186 patients (186 hips) were followed up for a mean of 4.3 (range 2-10) years., Results: With the exception of 4 patients who died during hospitalization, 176 of 230 ( 76.5%) patients could ambulate independently with or without an assistive device at the time of hospital discharge. Venous thromboembolism occurred in seven patients (3.0%). One hip dislocated due to a fall 1 month after the arthroplasty. Periprosthetic femoral fracture occurred in four patients and periprosthetic acetabular fracture in one patient. One patient had periprosthetic of acute pyelonephritis. There was no focal osteolysis around the femoral stem., Conclusion: The result of cementless HA using MAO-coated stem enabled early ambulation in most (76.5%) of elderly patients with unstable intertrochanteric fractures and the results were encouraging.

Microarc oxidation (MAO) has been regarded as one of the most effective techniques to suspend the corrosion rate of Mg-based alloys. In this research, MAO coating was successfully constructed on the surface of high-purity Zn for biomedical purpose. The microstructure, composition, corrosion behavior, and biocompatibility of MAO-coated samples were investigated. It was found that micro/nano pores were homogeneously distributed on the surface after MAO treatment in the electrolyte containing calcium and phosphorus components with pore size ranging from submicron scale to several micrometers. The MAO coating can modulate the corrosion behavior of pure Zn substrate by means of chemical dissolution and galvanic corrosion between coating and substrate. MG63 cells cultured in the 100% extracts of MAO-coated sample exhibited significant cytotoxicity due to stimulated cell apoptosis induced by high concentration of released Zn 2+ , whereas excellent cytocompatibility was observed for 20% extracts. Meanwhile, cell adhesion was promoted on the porous structure generated during MAO process. These results suggested MAO treatment can achieve an accelerated corrosion adjustment, as well as a better cell adhesion on pure Zn.

Highly porous Ti implant materials are being used in order to overcome the stress shielding effect on orthopedic implants. However, the lack of bioactivity on Ti surfaces is still a major concern regarding the osseointegration process. It is known that the rapid recruitment of osteoblasts in bone defects is an essential prerequisite for efficient bone repair. Conventionally, osteoblast recruitment to bone defects and subsequent bone repair has been achieved using growth factors. Thus, in this study highly porous Ti samples were processed by powder metallurgy using space holder technique followed by the bio-functionalization through microarc oxidation using a Ca- and P-rich electrolyte. The biological response in terms of early cell response, namely, adhesion, spreading, viability, and proliferation of the novel biofunctionalized highly porous Ti was carried out with NIH/3T3 fibroblasts and MC3T3-E1 preosteoblasts in terms of viability, adhesion, proliferation, and alkaline phosphatase activity. Results showed that bio-functionalization did not affect the cell viability. However, bio-functionalized highly porous Ti (22% porosity) enhanced the cell proliferation and activity. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 73-85, 2019., (© 2018 Wiley Periodicals, Inc.)

Objective: To investigate the antibacterial property and biological activity of Ti dental implant with antimicrobial peptide Pac-525 coatings, and to study the effect of peptide Pac-525 coatings on Porphyromonas gingivalis 's antibacterial performance and osteoblast proliferation and adhesion. Methods: After ultrasonic micro arc oxidation, alkali treatment and silane treatment, forty-five pure titanium specimens were exposed to antibacterial peptide Pac-525 in different concentration (0.25, 0.50, 0.75 g/L). The titanium specimens in the control group were only treated with ultrasonic micro arc oxidation, alkali treatment and silane treatment. The morphologies of coatings were observed by scanning electron microscope (SEM), and the element changes were detected by energy spectrum analyzer. Orange acridine-ethidium bromide double staining was used to detect the average percentage of live bacteria and biofilm thickness, after the specimens in each group and Porphyromonas gingivalis were co-cultured for 72 hours. Cell counting Kit-8 method and immunofluorescence staining were used to test the proliferation of osteoblasts, the number and growth morphologies of adherent cells, respectively. Results: SEM and energy spectrum analysis showed that the Pac-525 particles loaded on the surface of the coating, and the C and N elements in the Pac-525 coating group were significantly more than those in the control group. The average percentage of living bacteria in the control group, 0.25, 0.50 and 0.75 g/L antimicrobial peptides were 0.58%, 0.45%, 0.34% and 0.28%, respectively, and the difference between each group was statistically significant ( P< 0.05). The biofilm thickness of Porphyromonas gingivalis in 0.50 and 0.75 g/L antibacterial peptide group were (98.3±1.2) and (94.5±2.5) μm respectively, which were significantly less than those in control group and 0.25 g/L antibacterial peptide group [(117.6±1.5) and (118.0±1.3) μm] ( P< 0.05), respectively. The number of bone cell adhesion and proliferation of all antimicrobial peptides were significantly greater than those in the control group ( P< 0.05), and the cells stretched better. Conclusions: The antibacterial peptide coating of titanium implants could inhibit the formation of bacterial biofilm. It had good antibacterial properties and could promote the adhesion and proliferation of osteoblasts.

Although percutaneous titanium implants have become one of the best choices as retainers in the facial defects, peri-implantitis still occurs at a significant rate. This unwanted complication occurs due to adhesion of bacteria and subsequent biofilm formation. To solve this problem, we have developed a novel antibiotic nanodelivery system based on self-decomposable silica nanoparticles. In this study, silica-gentamycin (SG) nanoparticles were successfully fabricated using an innovative one-pot solution. The nanoparticles were incorporated within a gelatin matrix and cross-linked on microarc-oxidized titanium. To characterize the SG nanoparticles, their particle size, zeta potential, surface morphology, in vitro drug release, and decomposition process were sequentially evaluated. The antibacterial properties against the gram-positive Staphylococcus aureus , including bacterial viability, antibacterial rate, and bacteria morphology, were analyzed using SG-loaded titanium specimens. Any possible influence of released gentamycin on the viability of human fibroblasts, which are the main component of soft tissues, was investigated. SG nanoparticles from the antibacterial titanium coating continuously released gentamycin and inhibited S. aureus growth. In vitro investigation showed that the obtained nanodelivery system has good biocompatibility. Therefore, this design can be further investigated as a method to prevent infection around percutaneous implants., Competing Interests: The authors report no conflicts of interest in this work.

3D printed porous titanium (Ti) holds enormous potential for load-bearing orthopedic applications. Although the 3D printing technique has good control over the macro-sturctures of porous Ti, the surface properties that affect tissue response are beyond its control, adding the need for tailored surface treatment to improve its osseointegration capacity. Here, the one step microarc oxidation (MAO) process was applied to a 3D printed porous Ti6Al4V (Ti64) scaffold to endow the scaffold with a homogeneous layer of microporous TiO2 and significant amounts of amorphous calcium-phosphate. Following the treatment, the porous Ti64 scaffolds exhibited a drastically improved apatite forming ability, cyto-compatibility, and alkaline phosphatase activity. In vivo test in a rabbit model showed that the bone in-growth at the untreated scaffold was in a pattern of distance osteogenesis by which bone formed only at the periphery of the scaffold. In contrast, the bone in-growth at the MAO-treated scaffold exhibited a pattern of contact osteogenesis by which bone formed in situ on the entire surface of the scaffold. This pattern of bone in-growth significantly increased bone formation both in and around the scaffold possibly through enhancement of bone formation and disruption of bone remodeling. Moreover, the implant surface of the MAO-treated scaffold interlocked with the bone tissues through the fabricated microporous topographies to generate a stronger bone/implant interface. The increased osteoinetegration strength was further proven by a push out test. MAO exhibits a high efficiency in the enhancement of osteointegration of porous Ti64 via optimizing the patterns of bone in-growth and bone/implant interlocking. Therefore, post-treatment of 3D printed porous Ti64 with MAO technology might open up several possibilities for the development of bioactive customized implants in orthopedic applications.

Manipulating the degradation rate of biomedical magnesium alloys poses a challenge. The characteristics of a microarc oxidation (MAO), prepared in phytic acid, and poly(L-lactic acid) (PLLA) composite coating, fabricated on a novel Mg-1Li-1Ca alloy, were studied through field emission scanning electron microscopy (FE-SEM), electron probe X-ray microanalysis (EPMA), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The corrosion behaviors of the samples were evaluated via hydrogen evolution, potentiodynamic polarization and electrochemical impedance spectroscopy in Hanks' solution. The results indicated that the MAO/PLLA composite coatings significantly enhanced the corrosion resistance of the Mg-1Li-1Ca alloy. MTT and ALP assays using MC3T3 osteoblasts indicated that the MAO/PLLA coatings greatly improved the cytocompatibility, and the morphology of the cells cultured on different samples exhibited good adhesion. Hemolysis tests showed that the composite coatings endowed the Mg-1Li-1Ca alloys with a low hemolysis ratio. The increased solution pH resulting from the corrosion of magnesium could be tailored by the degradation of PLLA. The degradation mechanism of the composite coatings was discussed. The MAO/PLLA composite coating may be appropriate for applications on degradable Mg-based orthopedic implants.

Rapid osseointegration is recognized as a critical factor in determining the success rate of orthopedic and dental implants. Microarc oxidation (MAO) fabricated titanium oxide coatings with a porous topography have been proven to be a potent approach to enhance osteogenic capacity. Now we report two kinds of new hierarchical coatings with similar micromorphologies but different nanotopographies (i.e., MAO and MAO-AK coatings), and both coatings significantly promote cell attachment and osteogenic differentiation through mediating the integrin β1 signaling pathway. In this study, titanium with a unique hierarchical micro/nanomorphology surface was fabricated by a novel duplex coating process, that is, the first a titanium oxide layer was coated by MAO, and then the coating was electrochemically reduced in alkaline solution (MAO-AK). A series of in vitro stem cell differentiation and in vivo osseointegration experiments were carried out to evaluate the osteogenic capacity of the resulting coatings. In vitro, the initial adhesion of the canine bone marrow stem cells (BMSCs) seeded on the MAO and MAO-AK coatings was significantly enhanced, and cell proliferation was promoted. In addition, the expression levels of osteogenesis-related genes, osteorix, alkaline phosphates (ALP), osteopontin, and osteocalcin, in the canine BMSCs, were all up-regulated after incubation on these coatings, especially on the MAO-AK coating. Also, the in vitro ALP activity and mineralization capacity of canine BMSC cultured on the MAO-AK group was better than that on the MAO group. Furthermore, 6 weeks after insertion of the titanium implants into canine femurs, both the bone formation speed and the bone-implant contact ratio of the MAO-AK group were significantly higher than those of the MAO group. All these results suggest that this duplex coating process is promising for engineering titanium surfaces to promote osseointegration for dental and orthopedic applications.

Dental implants have been widely used for the replacement of missing teeth in the clinic, but further improvements are needed to meet the clinical demands for faster and tighter osseointegration. In this study, we fabricated safe and biocompatible chitosan (CS)/hyaluronic acid (HA) nanoparticles to deliver microRNA-21 (miR-21) and thereby accelerate osteogenesis in human bone marrow mesenchymal stem cells (hBMMSCs). The CS/HA/miR-21 nanoparticles were cross-linked with 0.2% gel solution onto microarc oxidation (MAO)-treated titanium (Ti) surfaces to fabricate the miR-21-functionalized MAO Ti surface, resulting in the development of a novel coating for reverse transfection. To characterize the CS/HA/miR-21 nanoparticles, their particle size, zeta potential, surface morphology, and gel retardation ability were sequentially investigated. Their biological effects, such as cell viability, cytotoxicity, and expression of osteogenic genes by hBMMSCs on the miR-21-functionalized MAO Ti surfaces, were evaluated. Finally, we explored appropriate CS/HA/miR-21 nanoparticles with a CS/HA ratio of 4:1 and N/P ratio 20:1 for transfection, which presented good spherical morphology, an average diameter of 160.4±10.75 nm, and a positive zeta potential. The miR-21-functionalized MAO Ti surfaces demonstrated cell viability, cytotoxicity, and cell spreading comparable to those exhibited by naked MAO Ti surfaces and led to significantly higher expression of osteogenic genes. This novel miR-21-functionalized Ti implant may be used in the clinic to allow more effective and robust osseointegration.

Titanium implants have been widely used for many medical applications, but bacterial infection after implant surgery remains one of the most common and intractable complications. To this end, long-term antibacterial ability of the implant surface is highly desirable to prevent implant-associated infection. In this study, a novel antibacterial coating containing a new antibacterial agent, (Z-)-4-bromo-5-(bromomethylene)-2(5H)-furanone loaded poly(L-lactic acid) nanoparticles, was fabricated on microarc-oxidized titanium for this purpose. The antibacterial coating produced a unique inhibition zone against Staphylococcus aureus throughout a 60-day study period, which is normally long enough to prevent the infection around implants in the early and intermediate stages. The antibacterial rate for adherent S. aureus was about 100% in the first 10 days and constantly remained over 90% in the following 20 days. Fluorescence staining of adherent S. aureus also confirmed the excellent antibacterial ability of the antibacterial coating. Moreover, in vitro experiments showed an enhanced osteoblast adhesion and proliferation on the antibacterial coating, and more notable cell spread was observed at the early stage. It is therefore concluded that the fabricated antibacterial coating, which exhibits relatively long-term antibacterial ability and excellent biological performance, is a potential and promising strategy to prevent implant-associated infection.

Improving osseointegration of extensively used titanium (Ti) implants still remains a main theme in implantology. Recently, grafting biomolecules onto a Ti surface has attracted more attention due to their direct participation in the osseointegration process around the implant. Semaphorin 3A (Sema3A) is a new proven osteoprotection molecule and is considered to be a promising therapeutic agent in bone diseases, but how to immobilize the protein onto a Ti surface to acquire a long-term effect is poorly defined. In our study, we tried to use chitosan to wrap Sema3A (CS/Sema) and connect to the microarc oxidized Ti surface via silane glutaraldehyde coupling. The microarc oxidization could formulate porous topography on a Ti surface, and the covalently bonded coating was homogeneously covered on the ridges between the pores without significant influence on the original topography. A burst release of Sema3A was observed in the first few days in phosphate-buffered saline and could be maintained for >2 weeks. Coating in phosphate-buffered saline containing lysozyme was similar, but the release rate was much more rapid. The coating did not significantly affect cellular adhesion, viability, or cytoskeleton arrangement, but the osteogenic-related gene expression was dramatically increased and calcium deposition was also abundantly detected. In conclusion, covalent bonding of CS/Sema could strongly improve osteogenic differentiation of osteoblasts and might be applied for Ti implant surface biofunctionalization.

Bioactive amorphous phase/TiO2 nanocrystal (APTN) composite coatings were fabricated by microarc oxidation (MAO) on Ti. The APTN coatings are composed of much amorphous phase with Si, Na, Ca, Ti and O elements and a few TiO2 nanocrystals. With increasing applied voltage, the micropore density of the APTN coating decreases and the micropore size of the APTN coating increases. The results indicate that less MC3T3-E1 cells attach on the APTN coatings as compared to Ti. However, the APTN coatings greatly enhance the cell proliferation ability and the activity of alkaline phosphatase. The amorphous phase and the concentrations of the released Ca and Si from the APTN coatings during cell culture have significant effects on the cell response., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Porous titanium was prepared by pressureless sintering of titanium beads with diameters of 100, 200, 400 and 600 μm. The results indicated that the mechanical properties of porous titanium changed significantly with different bead diameters. Plastic deformations such as necking phenomenon and dimple structure were observed on the fracture surface of porous titanium sintered by beads with diameter of 100 μm. However, it was difficult to find this phenomenon on the porous titanium with a titanium bead diameter of 600 μm. The microarc oxidized coatings were deposited on its surface to improve the bioactivity of porous titanium. Furthermore, the cefazolin sodium/chitosan composited films were fabricated on the microarc oxidized coatings for overcoming the inflammation due to implantation, showing good slow-release ability by addition of chitosan. And the release kinetic process of cefazolin sodium in composited films could be possibly fitted by a polynomial model., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Background: Dental implants have become increasingly common for the management of missing teeth. However, peri-implant infection remains a problem, is usually difficult to treat, and may lead eventually to dental implant failure. The aim of this study was to fabricate a novel antibacterial coating containing a halogenated furanone compound, ie, (Z-)-4-bromo-5-(bromomethylene)-2(5H)-furanone (BBF)-loaded poly(L-lactic acid) (PLLA) nanoparticles on microarc-oxidized titanium and to evaluate its release behavior in vitro., Methods: BBF-loaded PLLA nanoparticles were prepared using the emulsion solvent-evaporation method, and the antibacterial coating was fabricated by cross-linking BBF-loaded PLLA nanoparticles with gelatin on microarc-oxidized titanium., Results: The BBF-loaded PLLA nanoparticles had a small particle size (408 ± 14 nm), a low polydispersity index (0.140 ± 0.008), a high encapsulation efficiency (72.44% ± 1.27%), and a fine spherical shape with a smooth surface. The morphology of the fabricated antibacterial coating showed that the BBF-loaded PLLA nanoparticles were well distributed in the pores of the microarc oxidation coating, and were cross-linked with each other and the wall pores by gelatin. The release study indicated that the antibacterial coating could achieve sustained release of BBF for 60 days, with a slight initial burst release during the first 4 hours., Conclusion: The novel antibacterial coating fabricated in this study is a potentially promising method for prevention of early peri-implant infection.