Search

We present ALMA 230 GHz continuum and CO(2–1) observations of the nearby Compton-thick Seyfert galaxy ESO428–G14, with angular resolution 0.″7 (78 pc). CO(2–1) is distributed in clumpy spiral arms, a lopsided circumnuclear ring (CNR) with ∼200 pc radius, and a transverse gas lane with size <100 pc, which crosses the nucleus and connects the two portions of the CNR. The main CO velocity gradient is consistent with a rotating disk with dynamical mass Mdyn = 5 × 109M⊙ within ∼1 kpc. We detect off-plane gas motions with respect to the main disk plane which likely trace a molecular outflow with rate , along a biconical structure with radius 700 pc. The CO outflow smoothly joins the warm molecular outflow detected in SINFONI/Very Large Telescope data in the central 170 pc, suggesting that the outflow may cool with increasing distance. Our dynamical modeling of the inner 100 pc region suggests a warped disk or bar, and of fast gas streams which may trace an inflow toward the AGN. The inner warped disk overlaps with the most obscured, CT region seen in X-rays. There, we derive a column density , suggesting that molecular gas may contribute significantly to the AGN obscuration. Most of the hard X-ray emitting nuclear region is deprived of cold molecular gas and shows a CO-cavity. The CO-cavity is filled with warm molecular gas traced by H2, confirming that the 3–6 keV continuum and Fe Kα emission are due to scattering from dense ISM clouds. [ABSTRACT FROM AUTHOR]

Odontoid fractures are among the most common cervical spine fractures in the elderly and are associated with increased morbidity and mortality. Clinical evidence suggests improved survival and quality of life after operative intervention compared to nonoperative treatment. This study seeks to examine the stability of an osteoporotic Type II odontoid fracture following posterior atlantoaxial fixation with either the Magerl transarticular fixation technique or the Harms C1 lateral mass screws C2 pedicle screw rod fixation. Biomechanical cadaveric study. Eighteen cadaveric specimens extending from the cephalus to C7 were used in this study. Reflective marker arrays were attached to C1 and C2 and a single marker on the dens to measure movement of each during loading with C2–C3 and occiput-C1 being allowed to move freely. A biomechanical testing protocol imparted moments in flexion-extension, axial rotation, and lateral bending while a motion capture system recorded the motions of C1, C2, and the dens. The spines were instrumented with either the Harms fixation (n=9) or Magerl fixation (n=9) techniques, and a simulated Type II odontoid fracture was created. Motions of each instrumented spine were recorded for all moments, and then again after the instrumentation was removed to model the injured, noninstrumented state. Both Harms and Magerl posterior C1–C2 fixation allowed for C1, C2, and the dens to move as a relative unit. Without fixation the dens motion was coupled with C1. No significant differences were found in X, Y, Z translation motion of the dens, C1 or C2 during neutral zone motions between the Magerl and Harms fixation techniques. There were no significant differences found in Euler angle motion between the two techniques in either flexion-extension, axial rotation, or lateral bending motion. Our findings suggest that both Harms and Magerl fixation can significantly reduce dens motion in Type II odontoid fractures in an osteoporotic cadaveric bone model. Both Harms and Magerl posterior atlantoaxial fixation techniques allowed for C1, C2, and the dens to move as a relative unit following odontoid fracture, establishing more anatomic stability to the upper cervical spine. [ABSTRACT FROM AUTHOR]

Change of direction, stops, and pivots are among the most common non-contact movements associated with anterior cruciate ligament (ACL) injuries in soccer. By observing these dynamic movements, clinicians recognize abnormal kinematic patterns that contribute to ACL tears such as increased knee valgus or reduced knee flexion. Different motions and physical demands are observed across playing positions, which may result in varied lower limb kinematic patterns. In the present study, 28 college and sub-elite soccer players performed four dynamic motions (change of direction with and without ball, header, and instep kick) with the goal of examining the effect of on-field positioning, leg dominance, and gender in lower body kinematics. Motion capture software monitored joint angles in the knee, hip, and ankle. A three-way ANOVA showed significant differences in each category. Remarkably, centrally positioned players displayed significantly greater knee adduction (5° difference, p = 0.013), hip flexion (9° difference, p = 0.034), hip adduction (7° difference, p = 0.016), and dorsiflexion (12° difference, p = 0.022) when performing the instep kick in comparison to their laterally positioned counterparts. These findings suggest that central players tend to exhibit a greater range of motion when performing an instep kicking task compared to laterally positioned players. At a competitive level, this discrepancy could potentially lead to differences in lower limb muscle development among on-field positions. Accordingly, it is suggested to implement position-specific prevention programs to address these asymmetries in lower limb kinematics, which can help mitigate dangerous kinematic patterns and consequently reduce the risk of ACL injury in soccer players. [ABSTRACT FROM AUTHOR]

Diffusion within extracellular matrix is essential to deliver nutrients and larger metabolites to the avascular region of the meniscus. It is well known that both structure and composition of the meniscus vary across its regions; therefore, it is crucial to fully understand how the heterogenous meniscal architecture affects its diffusive properties. The objective of this study was to investigate the effect of meniscal region (core tissue, femoral, and tibial surface layers) and molecular weight on the diffusivity of several molecules in porcine meniscus. Tissue samples were harvested from the central area of porcine lateral menisci. Diffusivity of fluorescein (MW 332 Da) and three fluorescence-labeled dextrans (MW 3k, 40k, and 150k Da) was measured via fluorescence recovery after photobleaching. Diffusivity was affected by molecular size, decreasing as the Stokes' radius of the solute increased. There was no significant effect of meniscal region on diffusivity for fluorescein, 3k and 40k dextrans (p>0.05). However, region did significantly affect the diffusivity of 150k Dextran, with that in the tibial surface layer being larger than in the core region (p = 0.001). Our findings contribute novel knowledge concerning the transport properties of the meniscus fibrocartilage. This data can be used to advance the understanding of tissue pathophysiology and explore effective approaches for tissue restoration. [ABSTRACT FROM AUTHOR]

Computed tomography (CT) and magnetic resonance imaging (MRI) provide key structural information on brain pathophysiology. Positron emission tomography (PET) measures metabolism in the living brain; it plays an important role in molecular neuroimaging and is rapidly expanding its field of application to the study of neurodegenerative diseases. Different PET radiopharmaceuticals allow in vivo characterization and quantization of biological processes at the molecular and cellular levels, from which many neurodegenerative diseases develop. In addition, hybrid imaging tools such as PET/CT and PET/MRI support the utility of PET, enabling the anatomical mapping of functional data. In this overview, we describe the most commonly used PET tracers in the diagnostic work-up of patients with Alzheimer's disease, Parkinson's disease, and other neurodegenerative diseases. We also briefly discuss the pathophysiological processes of tracer uptake in the brain, detailing their specific cellular pathways in clinical cases. This overview is limited to imaging agents already applied in human subjects, with particular emphasis on those tracers used in our department. [ABSTRACT FROM AUTHOR]

Damage to the meniscus has been associated with excessive shear loads. Aimed at elucidating meniscus pathophysiology, previous studies have investigated the shear properties of the meniscus fibrocartilaginous core. However, the meniscus is structurally inhomogeneous, with an external cartilaginous envelope (tibial and femoral surface layers) wrapping the tissue core. To date, little is known about the shear behavior of the surface layers. The objective of this study was to measure the dynamic shear properties of the surface layers and derive empirical relations with their composition. Specimens were harvested from tibial and femoral surface layers and core of porcine menisci (medial and lateral, n = 10 each). Frequency sweep tests yielded complex shear modulus (G*) and phase shifts (δ). Mechanical behavior of regions was described by a generalized Maxwell model. Correlations between shear moduli with water and glycosaminoglycans content of the tissue regions were investigated. The femoral surface had the lowest shear modulus, when compared to core and tibial regions. A 3‐relaxation times Maxwell model satisfactorily interpreted the shear behavior of all tissue regions. Inhomogeneous tissue composition was also observed, with water content in the surface layers being higher when compared with tissue core. Water content negatively correlated with shear properties in all regions. The lower measured shear properties in the femoral layer may explain the higher prevalence of meniscal tears on the superior surface of the tissue. The heterogenous behavior of the tissue in shear provides insight into meniscus pathology and has important implications for efforts to tissue engineer replacement tissues. [ABSTRACT FROM AUTHOR]

Context. Hyperluminous quasi-stellar objects (QSOs) are ideal laboratories to investigate active galactic nucleus (AGN) feedback mechanisms. Their formidable energy release causes powerful winds at all scales, and thus the maximum feedback is expected. Aims. Our aim is to derive the mean spectral energy distribution (SED) of a sample of 85 WISE-SDSS selected hyperluminous (WISSH) quasars. Since the SED provides a direct way to investigate the AGN structure, our goal is to understand if quasars at the bright end of the luminosity function have peculiar properties compared to the bulk of the QSO population. Methods. We collected all the available photometry, from X-rays to the far-infrared (FIR); each WISSH quasar is observed in at least 12 different bands. We then built a mean intrinsic SED after correcting for the dust extinction, absorption and emission lines, and intergalactic medium absorption. We also derived bolometric, IR band, and monochromatic luminosities together with bolometric corrections at λ = 5100 Å and 3 μm. We define a new relation for the 3 μm bolometric correction. Results. We find that the mean SED of hyperluminous WISSH QSOs shows some differences compared to that of less luminous sources (i.e., a lower X-ray emission and a near- and mid-IR excess which can be explained assuming a larger dust contribution. WISSH QSOs have stronger emission from both warm (T ∼ 500 − 600 K) and very hot (T ≥ 1000 K) dust, the latter being responsible for shifting the typical dip of the AGN SED from 1.3 μm to 1.1 μm. We also derived the mean SEDs of two subsamples created based on their spectral features (presence of broad absorption lines and equivalent width of CIV line). We confirm that broad absorption lines (BALs) are X-ray weak and that they have a reddened UV-optical continuum. We also find that BALs tend to have stronger emission from the hot dust component. For sources with a weaker CIV line, our main result is the confirmation of their lower X-ray emission. By populating the LIR vs. z diagram proposed by Symeonidis & Page (MNRAS, 503, 3992), we found that ∼90% of WISSH QSOs with z ≥ 3.5 have their FIR emission dominated by star-forming activity. Conclusions. This analysis suggests that hyperluminous QSOs have a peculiar SED compared to less luminous objects. It is therefore critical to use SED templates constructed exclusively from very bright quasar samples (such as this one) when dealing with particularly luminous sources, such as high-redshift QSOs. [ABSTRACT FROM AUTHOR]

Context: Radioiodine uptake is rarely observed in normal non-lactating breast tissue. Investigation of the in vivoregulation of iodide uptake in breast tissue may be useful for the induction of radioiodine uptake in breast cancer tissue for diagnostic and therapeutic purposes. Case reports: We report the cases of two post-menopausal women who underwent radioiodine therapy for papillary thyroid carcinoma and in whom breast uptake of radioiodine on post-therapy whole body scan (WBS) was observed. Methods and results: In both patients, elevated serum prolactin levels (123 ng/mL in patient 1 and 48 ng/mL in patient 2) were documented at the time when radioiodine uptake in the breast was observed. The hyperprolactinemia was due to prolonged treatment with the anti-dopaminergic neuroleptic risperidone in Case 1, and chronic renal failure in Case 2. When prolactin levels were normalized (by withdrawal of risperidone in Case 1 and with cabergoline in Case 2), breast tissue uptake was no longer evident on WBS. Conclusion: These cases provide the first documented correlation between serum levels of endogenous prolactin and radioiodine uptake by involuted breast tissue in humans. [ABSTRACT FROM AUTHOR]

The meniscus is a fibrocartilaginous tissue that plays an essential role in load transmission, lubrication, and stabilization of the knee. Loss of meniscus function, through degeneration or trauma, can lead to osteoarthritis in the underlying articular cartilage. To perform its crucial function, the meniscus extracellular matrix has a particular organization, including collagen fiber bundles running circumferentially, allowing the tissue to withstand tensile hoop stresses developed during axial loading. Given its critical role in preserving the health of the knee, better understanding structure-function relations of the biomechanical properties of the meniscus is critical. The main objective of this study was to measure the compressive modulus of porcine meniscus using Atomic Force Microscopy (AFM); the effects of three key factors were investigated: direction (axial, circumferential), compartment (medial, lateral) and region (inner, outer). Porcine menisci were prepared in 8 groups (= 2 directions x 2 compartments x 2 regions) with n = 9 per group. A custom AFM was used to obtain force-indentation curves, which were then curve-fit with the Hertz model to determine the tissue's compressive modulus. The compressive modulus ranged from 0.75 to 4.00 MPa across the 8 groups, with an averaged value of 2.04±0.86MPa. Only direction had a significant effect on meniscus compressive modulus (circumferential > axial, p = 0.024), in agreement with earlier studies demonstrating that mechanical properties in the tissue are anisotropic. This behavior is likely the result of the particular collagen fiber arrangement in the tissue and plays a key role in load transmission capability. This study provides important information on the micromechanical properties of the meniscus, which is crucial for understanding tissue pathophysiology, as well as for developing novel treatments for tissue repair. [ABSTRACT FROM AUTHOR]

Individuals with a body mass index (BMI) classified as obesity constitute 27.7% of U.S. workers. These individuals are more likely to experience work-related injuries. However, ergonomists still design work tasks based on the general population and normal body weight. This is particularly true for manual lifting tasks and the calculation of recommended weight limits (RWL) as per National Institute of Occupational Safety & Health (NIOSH) guidelines. This study investigates the effects of BMI on indicators of physiological stress. It was hypothesized that, for clinically elevated BMI individuals, repeated manual lifting at RWL would produce physiological stress above safety limits. A repetitive box lifting task was designed to measure metabolic parameters: volume of carbon dioxide (VCO2) and oxygen (VO2), respiratory exchange ratio (RER), heart rate (HR), and energy expenditure rate (EER). A two-way ANOVA compared metabolic variables with BMI classification and gender, and linear regressions investigated BMI correlations. Results showed that BMI classification represented a significant effect for four parameters: VCO2 (p < 0.001), VO2 (p < 0.001), HR (p = 0.012), and EER (p < 0.001). In contrast, gender only had a significant effect on VO2 (p = 0.014) and EER (p = 0.017). Furthermore, significant positive relationships were found between BMI and VCO2 (R2 = 59.65%, p < 0.001), VO2 (R2 = 45.01%, p < 0.001), HR (R2 = 21.86%, p = 0.009), and EER (R2 = 50.83%, p < 0.001). Importantly, 80% of obese subjects exceeded the EER safety limit of 4.7 kcal/min indicated by NIOSH. Indicators of physiological stress are increased in clinically elevated BMI groups and appear capable of putting these individuals at increased risk for workplace injury. [ABSTRACT FROM AUTHOR]

Background: Odontoid process fractures are among the most common in elderly cervical spines. Their treatment often requires fixation, which may include use of implants anteriorly or posteriorly. Bone density can significantly affect the outcomes of these procedures. Currently, little is known about bone mineral density (BMD) distributions within cervical spine in elderly. This study documented BMD distribution across various anatomical regions of elderly cervical vertebrae. Methods and findings: Twenty-three human cadaveric C1-C5 spine segments (14 males and 9 female, 74±9.3 y.o.) were imaged via quantitative CT-scan. Using an established experimental protocol, the three-dimensional shapes of the vertebrae were reconstructed from CT images and partitioned in bone regions (4 regions for C1, 14 regions for C2 and 12 regions for C3-5). The BMD was calculated from the Hounsfield units via calibration phantom. For each vertebral level, effects of gender and anatomical bone region on BMD distribution were investigated via pertinent statistical tools. Data trends suggested that BMD was higher in female vertebrae when compared to male ones. In C1, the highest BMD was found in the posterior portion of the bone. In C2, BMD at the dens was the highest, followed by lamina and spinous process, and the posterior aspect of the vertebral body. In C3-5, lateral masses, lamina, and spinous processes were characterized by the largest values of BMD, followed by the posterior vertebral body. Conclusions: The higher BMD values characterizing the posterior aspects of vertebrae suggest that, in the elderly, posterior surgical approaches may offer a better fixation quality. [ABSTRACT FROM AUTHOR]

Research evidence has consistently documented a higher risk of suicidality in the Lesbian, Gay, Bisexual, Transgender, Intersex, and Queer (LGBTIQ) population. This systematic review and meta-analysis aimed to report a detailed description of research data regarding the risk of Attempted Suicide (SA), Suicide Ideation (SI), and Non-Suicidal Self-Injury (NSSI) behaviours for LGBTIQ people and their subgroups. Medline, Scopus, PsycINFO, and EMBASE were searched for studies reporting a comparative estimation of SA, SI, and NSSI rates among LGBTIQ population and the general population (i.e. heterosexual/cisgender), without restrictions on participants' age and setting for the enrolment. Pooled analyses were based on odds ratios (ORs, with 95% CIs), estimated through inverse variance models with random effects. Fifty studies were selected for the quantitative synthesis and included fifty samples involving 3.735.601 controls and 87.252 LGBTIQ people. LGBTIQ people reported an increased risk of SA (OR:4.36[95%CI:3.32;5.71]), SI (OR:3.76[95%CI:3.02;4.69]), and NSSI (OR:4.24[95%CI:3.23;5.55]). Among LGBTIQ subgroups, the Bisexual group has shown the highest risk of suicidality (SA, OR:6.71; SI, OR:5.04; NSSI, OR: 5.03), followed by the Lesbian-Gay for attempted suicide (SA, OR:6.03), and the Transgender-Intersex-Queer for suicide ideation and non-suicidal self-injury (SI and NSSI, OR:3.42). The quality of the evidence ranged from low to moderate. Our findings have shown that LGBTIQ people report a higher risk of suicidality compared with their cisgender/heterosexual peers. This evidence may contribute to the public awareness on LGBTQI mental health needs and suggest supportive strategies as well as preventive interventions (e.g. supportive programs, counselling, and destigmatizing efforts) as parts of a tailored health-care planning aimed to reduce psychiatric morbidity and mortality in this at-risk population. [ABSTRACT FROM AUTHOR]

The etiology of bone refractures after screw removal can be attributed to residual drill hole defects. This biomechanical study compared the torsional strength of bones containing various sized cortical drill defects in a tibia model. Bicortical drill hole defects of 3 mm, 4 mm, and 5 mm diameters were tested in 26 composite tibias versus intact controls without a drill defect. Each tibia was secured in alignment with the rotational axis of a materials testing system and the proximal end rotated internally at a rate of 1 deg./s until mechanical failure. All defect test groups were significantly lower (P < 0.01) in torque-to-failure than the intact group (82.80 ± 3.70 Nm). The 4 mm drill hole group was characterized by a significantly lower (P = 0.021) torque-to-failure (51.00 ± 3.27 Nm) when compared to the 3 mm drill hole (59.00 ± 5.48 Nm) group, but not different than the 5 mm hole group (55.71 ± 5.71 Nm). All bones failed through spiral fractures, bones with defects also exhibited posterior butterfly fragments. All the tested drill hole sizes in this study significantly reduced the torque-to-failure from intact by a range of 28.4% to 38.4%, in agreement with previous similar studies. The 5 mm drill hole represented a 22.7% diameter defect, the 4 mm drill hole a 18.2% diameter defect, and the 3 mm drill hole a 13.6% diameter defect. Clinicians should be cognizant of this diminution of long bone strength after a residual bone defect in their creation and management of patient rehabilitation programs. • Residual drill holes in composite tibia significantly reduce torque-to-failure from intact. • A 28.4% to 38.4% reduction in tibia strength was observed. • Clinicians should consider long bone strength when creating and managing residual bone defects. [ABSTRACT FROM AUTHOR]

The meniscus is crucial in maintaining the knee function and protecting the joint from secondary pathologies, including osteoarthritis. Although most of the mechanical properties of human menisci have been characterized, to our knowledge, its dynamic shear properties have never been reported. Moreover, little is known about meniscal shear properties in relation to tissue structure and composition. This is crucial to understand mechanisms of meniscal injury, as well as, in regenerative medicine, for the design and development of tissue engineered scaffolds mimicking the native tissue. Hence, the objective of this study was to characterize the dynamic and equilibrium shear properties of human meniscus in relation to its anisotropy and composition. Specimens were prepared from the axial and the circumferential anatomical planes of medial and lateral menisci. Frequency sweeps and stress relaxation tests yielded storage (G ′) and loss moduli (G ″), and equilibrium shear modulus (G). Correlations of moduli with water, glycosaminoglycans (GAGs), and collagen content were investigated. The meniscus exhibited viscoelastic behavior. Dynamic shear properties were related to tissue composition: negative correlations were found between G ′ , G ″ and G , and meniscal water content; positive correlations were found for G′ and G″ with GAG and collagen (only in circumferential samples). Circumferential samples, with collagen fibers orthogonal to the shear plane, exhibited superior dynamic mechanical properties, with G′ ~70 kPa and G″ ~10 kPa, compared to those of the axial plane ~15 kPa and ~1 kPa, respectively. Fiber orientation did not affect the values of G, which ranged from ~50 to ~100 kPa. [ABSTRACT FROM AUTHOR]

Background: Research suggests that microaggressions detrimentally impact the mental health of members of marginalized social groups., Aims: The aim of this systematic review was to assess the exposure to microaggressions and related implications on mental health of Lesbian, Gay, Bisexual, Transgender, Intersex, and Queer (LGBTIQ) people., Method: Medline, Scopus, PsycINFO, CINAHL, and EMBASE were searched until January 2023. Studies reporting data on the exposure to microaggressions toward LGBTIQ people were identified. Meta-analyses of rates of exposure to microaggression and of the association between microaggressions and mental health outcomes were based on odds ratio (OR) and standardized mean difference (SMD) with 95% confidence intervals (95% CI), estimated through inverse variance models with random effects., Results: The review process led to the selection of 17 studies, involving a total of 9036 LGBTIQ people, of which 6827 identifying as cisgenders, and 492 as heterosexuals, were included in the quantitative synthesis. Overall, LGBTIQ people showed an increased risk of microaggression (SMD: 0.89; 95% CI [0.28, 1.50]), with Transgender people having the highest risk ( OR : 10.0; 95% CI [3.08, 32.4]). Microaggression resulted associated with risk of depression (SMD: 0.21; 95% CI [0.05, 0.37]), anxiety (SMD: 0.29; 95% CI [0.17, 0.40]), suicide attempts ( OR : 1.13; 95% CI [1.08, 1.18]), alcohol abuse ( OR : 1.32; 95% CI [1.13, 1.54]), but not to suicidal ideation ( OR : 1.56; 95% CI [0.64, 3.81]) and cannabis abuse ( OR : 1.44; 95% CI [0.82, 2.55]). The quality of the evidence was limited by the small number of studies., Conclusions: LGBTIQ people are at higher risk of microaggressions compared with their cisgender/heterosexual peers, which may lead to mental health consequences. This evidence may contribute to public awareness of LGBTIQ mental health needs and suggest supportive strategies as well as preventive interventions (e.g., supportive programs and destigmatizing efforts) as parts of tailored health-care planning aimed to reduce psychiatric morbidity in this population., Competing Interests: Conflict of interestThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Aims: Lesbian, gay, bisexual, transgender and queer people (LGBTQ) are at increased risk of traumatization. This systematic review aimed to summarize data regarding the risk of post-traumatic stress disorder (PTSD) for LGBTQ people and their subgroups., Methods: Medline, Scopus, PsycINFO and EMBASE were searched until September 2022. Studies reporting a comparative estimation of PTSD among LGBTQ population and the general population (i.e., heterosexual/cisgender), without restrictions on participants' age and setting for the enrolment, were identified. Meta-analyses were based on odds ratio (OR and 95% confidence intervals [CI]), estimated through inverse variance models with random effects., Results: The review process led to the selection of 27 studies, involving a total of 31,903 LGBTQ people and 273,842 controls, which were included in the quantitative synthesis. Overall, LGBTQ people showed an increased risk of PTSD (OR: 2.20 [95% CI: 1.85; 2.60]), although there was evidence of marked heterogeneity in the estimate ( I 2  = 91%). Among LGBTQ subgroups, transgender people showed the highest risk of PTSD (OR: 2.52 [95% CI: 2.22; 2.87]) followed by bisexual people (OR: 2.44 [95% CI: 1.05; 5.66]), although these comparisons are limited by the lack of data for other sexual and gender minorities, such as intersex people. Interestingly, the risk of PTSD for bisexual people was confirmed also considering lesbian and gay as control group (OR: 1.44 [95% CI: 1.07; 1.93]). The quality of the evidence was low., Conclusions: LGBTQ people are at higher risk of PTSD compared with their cisgender/heterosexual peers. This evidence may contribute to the public awareness on LGBTQ mental health needs and suggest supportive strategies as well as preventive interventions (e.g., supportive programs, counselling, and destigmatizing efforts) as parts of a tailored health-care planning aimed to reduce psychiatric morbidity in this at-risk population.

The phase transition between galaxies and quasars is often identified with the rare population of hyper-luminous, hot dust-obscured galaxies. Galaxy formation models predict these systems to grow via mergers, that can deliver large amounts of gas toward their centers, induce intense bursts of star formation and feed their supermassive black holes. Here we report the detection of 24 galaxies emitting Lyman-α emission on projected physical scales of about 400 kpc around the hyper-luminous hot dust-obscured galaxy W0410-0913, at redshift z = 3.631, using Very Large Telescope observations. While this indicates that W0410-0913 evolves in a very dense environment, we do not find clear signs of mergers that could sustain its growth. Data suggest that if mergers occurred, as models expect, these would involve less massive satellites, with only a moderate impact on the internal interstellar medium of W0410-0913, which is sustained by a rotationally-supported fast-rotating molecular disk, as Atacama Large Millimeter Array observations suggest., (© 2022. The Author(s).)