Search

This paper proposes a hybrid discontinuous control methodology for a voltage source converter (VSC) based distribution static compensator (DSTATCOM) connected to a 3-phase distribution system. It is assumed that the DSTATCOM controls the point of common coupling (PCC) voltage. An LC output filter is connected at the output of the VSC. With the help of both filter inductor current and filter capacitor voltage control, the voltage across the filter capacitor is controlled. Based on the voltage error, the control is switched between voltage and current control mode. In this scheme, an extra diode state is used that makes the VSC output current discontinuous. This diode state reduces the switching losses because half of the total switching occurs at nearly zero converter current. The effects of different source conditions on voltage at PCC are studied. Voltage angle at PCC is controlled using a PI controller. Simulation studies are performed using PSCAD to validate the efficacy of the proposed controller.

In this paper, load compensation using multilevel inverter-based distribution static compensator (DSTATCOM) is presented. The DSTATCOM is connected to a three-phase four-wire (3p4w) distribution system. Two different multilevel inverter topologies are used to realize the DSTATCOM. They are diode-clamped multilevel inverter (DCMLI) and flying capacitor multilevel inverter (FCMLI). A compensating technique has been derived, which uses the state feedback control to the multilevel inverters-based DSTATCOMs. A switching strategy for the multilevel inverters that ensures utilization of all output voltage states of the inverter for efficient tracking of references has been proposed. The schemes of dc-link capacitor voltage control for DCMLI and flying capacitor voltage control for FCMLI have been discussed. Comparative studies of performances of the two DSTATCOM topologies are performed. The simulation studies are performed using PSCAD/EMTDC to validate the efficacy of the proposed control scheme.

In this paper, the commonly used switching schemes for sliding mode control of power converters is analyzed and designed in the frequency domain. Particular application of a distribution static compensator (DSTATCOM) in voltage control mode is investigated in a power distribution system. Tsypkin's method and describing function is used to obtain the switching conditions for the two-level and three-level voltage source inverters. Magnitude conditions of carrier signals are developed for robust switching of the inverter under carrier-based modulation scheme of sliding mode control. The existence of border collision bifurcation is identified to avoid the complex switching states of the inverter. The load bus voltage of an unbalanced three-phase nonstiff radial distribution system is controlled using the proposed carrier-based design. The results are validated using PSCAD/EMTDC simulation studies and through a scaled laboratory model of DSTATCOM that is developed for experimental verification

Various load compensation schemes proposed in literature assume that voltage source at point of common coupling (PCC) is stiff. In practice, however, the load is remote from a distribution substation and is supplied by a feeder. In the presence of feeder impedance, the PWM inverter switchings distort both the PCC voltage and the source currents. In this paper load compensation with such a non-stiff source is considered. A switching control of the voltage source inverter (VSI) based on state feedback is used for load compensation with non-stiff source. The design of the state feedback controller requires careful considerations in choosing a gain matrix and in the generation of reference quantities. These aspects are considered in this paper. Detailed simulation and experimental results are given to support the control design.