Search

Nanowhiskers in a colloidal dispersion are known to form chiral nematic liquid crystals (CNLC), as seen in a cellulose nanowhisker or so-called cellulose nanocrystal and chitin nanowhisker. In our related work, we clarified that once the thus-created chitin nanowhiskers with surface modified by chitosan (CTWK-CS) in CNLC phase were wet-spun, we could directly obtain anisotropic microfibers containing the highly ordered CTWK-CS. This drastic structural transformation from CNLC to anisotropic microfibers might relate to several important stages, i.e., stage (i) is the alignment of CTWK-CS initiated by a specific concentration and flow to create aggregation in the CNLC state, stage (ii) is the coagulation of CTWK-CS in CNLC to transform to microfibers, and stage (iii) is the drying of the thus-extruded microfibers to allow CTWK-CS alignment. The present work sets up the experimental systems simulating stages (i) and (iii) to reveal the orientational behavior of CTWK-CS and the structural evolution, respectively, by synchrotron 2D WAXD measurement. In stage (i), the high degree of the parallel alignments of CTWK-CS with the chain axis oriented along the flow direction of the colloidal dispersions confirms that the flow and concentration synergistically controlled CTWK-CS alignment. In contrast, for stage (iii), the poor c -axial orientation of CTWK-CS in as-spun wet microfibers gradually changed to the high degree of c -axial orientation along the fiber direction during drying process, indicating a reorientation of CTWK-CS along with dehydration. The present study declares an in situ observation of the direct wet spinning of nanowhiskers about their remarkable alignments in the sheared colloidal dispersions (stage (i)) and their random-to-high reorientation during the drying process of the as-spun wet microfiber (stage (iii)).

Alternative strategies to design sustainable-element-based electrocatalysts enhancing oxygen evolution reaction (OER) kinetics are demanded to develop affordable yet high-performance water-electrolyzers for green hydrogen production. Here, it is demonstrated that the spontaneous-spin-polarized 2D π-d conjugated framework comprising abundant elements of nickel and iron with a ratio of Ni:Fe = 1:4 with benzenehexathiol linker (BHT) can improve OER kinetics by its unique electronic property. Among the bimetallic NiFe x:y -BHTs with various ratios with Ni:Fe = x:y, the NiFe 1:4 -BHT exhibits the highest OER activity. The NiFe 1:4 -BHT shows a specific current density of 140 A g -1 at the overpotential of 350 mV. This performance is one of the best activities among state-of-the-art non-precious OER electrocatalysts and even comparable to that of the platinum-group-metals of RuO 2 and IrO 2 . The density functional theory calculations uncover that introducing Ni into the homometallic Fe-BHT (e.g., Ni:Fe = 0:1) can emerge a spontaneous-spin-polarized state. Thus, this material can achieve improved OER kinetics with spin-polarization which previously required external magnetic fields. This work shows that a rational design of 2D π-d conjugated frameworks can be a powerful strategy to synthesize promising electrocatalysts with abundant elements for a wide spectrum of next-generation energy devices., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

In this study, thin fiber composite polymer electrolyte membranes (PEMs) were prepared using short side-chain perfluorosulfonic acid (PFSA) ionomers, Aquivion, to create composite PEMs with improved proton conductivity and improved mechanical properties. PFSA thin fiber webs prepared by blow spinning and successive hot pressing were used as the porous substrate. Herein, PFSA ionomers were used for both the substrate and the matrix of the composite PEMs, and their structures, properties, and fuel cell performance were characterized. By adding the PFSA thin fiber webs to the matrix, the proton conductivity was enhanced and the mechanical properties were slightly improved. The prepared PFSA thin fiber composite PEM showed better FC performance than that of the pristine PFSA one for the high-temperature low-humidity condition in addition to the low-temperature high-humidity one. To the best of our knowledge, this is the first report on the all PFSA composite membranes containing a PFSA thin fiber framework.

The development of artificial spider silk with properties similar to native silk has been a challenging task in materials science. In this study, we use a microfluidic device to create continuous fibers based on recombinant MaSp2 spidroin. The strategy incorporates ion-induced liquid-liquid phase separation, pH-driven fibrillation, and shear-dependent induction of β-sheet formation. We find that a threshold shear stress of approximately 72 Pa is required for fiber formation, and that β-sheet formation is dependent on the presence of polyalanine blocks in the repetitive sequence. The MaSp2 fiber formed has a β-sheet content (29.2%) comparable to that of native dragline with a shear stress requirement of 111 Pa. Interestingly, the polyalanine blocks have limited influence on the occurrence of liquid-liquid phase separation and hierarchical structure. These results offer insights into the shear-induced crystallization and sequence-structure relationship of spider silk and have significant implications for the rational design of artificially spun fibers., (© 2024. The Author(s).)

In this study, we investigated the effect of morphology on the gas-transport properties of a poly(ether- block -amide) (PEBA) multiblock copolymer. We annealed the copolymer samples and varied the annealing temperature to evaluate the influence of changes in the microstructure on the gas transport properties of PEBA. In addition, we used time-resolved attenuated total reflection Fourier transform infrared spectroscopy to evaluate the diffusion coefficient of CO 2 in PEBA based on the Fickian model. The effect of the annealing temperature on the microphase-separated structure of the multiblock copolymer is discussed in detail. Furthermore, the gas diffusivity was significantly affected by the purity of the soft domains. The annealed sample demonstrated a 38% increase in CO 2 permeability while maintaining a high CO 2 /N 2 permselectivity of approximately 53. The findings of this study provide valuable insight into the design and optimization of PEBA membranes for gas separation applications.

Epoxy resin thin films are widely used in applications such as coating materials, insulator films, and adhesives; accordingly, investigations of their physical properties have garnered increasing importance. Although the physical properties of thermoset epoxy thin films are strongly affected by the curing conditions, such as the heating temperature and curing time, the dynamic properties during the curing process have not been studied thoroughly. In this study, we investigated the thermal fluctuations on the surface of epoxy resin thin films using grazing-incidence X-ray photon correlation spectroscopy, to elucidate the dynamic behaviours during the curing process. We thus succeeded in observing the freezing of capillary waves during the thermal curing process. These results are expected to facilitate a deeper understanding of the curing mechanisms of various thin films.

Spider's minor ampullate silk, or MI-silk, exhibits distinct mechanical properties and water resistance compared to its major ampullate counterpart (MA-silk). The principal protein constituent of MI-silk is known as minor ampullate spidroin, or MiSp, and while its sequence has been deciphered and is thought to underlie the differences in properties with MA-silk, the composition of MI-silk and the relationship between its composition and properties remain elusive. In this study, we set out to investigate the mechanical properties, water resistance, and proteome of MA-silk and MI-silk from Araneus ventricosus and Trichonephila clavata . We also synthesized artificial fibers from major ampullate spidroin, MaSp1 and 2, and MiSp to compare their properties. Our proteomic analysis reveals that the MI-silk of both araneids is composed of MiSp, MaSp1, and spidroin constituting elements (SpiCEs). The absence of MaSp2 in the MI-silk proteome and the comparison of the water resistance of artificial fibers suggest that the presence of MaSp2 is the reason for the disparity in water resistance between MI-silk and MA-silk.

The helix-sense inversions of poly(β-phenethyl l-aspartate) (2P) and diblock copolymers (2P-3P), with 2P and poly(β-phenylpropyl l-aspartate) (3P) blocks, were studied in their solid states using synchrotron wide-angle X-ray diffraction and small-angle X-ray scattering. The characteristic parameters of the π-helix structure of 2P were directly determined in situ after the helix transition at a high temperature. In the 2P-3P block copolymers, the main chains of the 3P blocks initially convert from right- to left-handed α-helices, and then the 2P blocks convert irreversibly from right-handed α-helices to left-handed π-helices. The chemical structures of the side chains of poly(l-aspartic acid ester)s significantly affect their helix transition behaviors., (© 2022 The Authors. Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd.)

Spider silks are among the toughest known materials and thus provide models for renewable, biodegradable, and sustainable biopolymers. However, the entirety of their diversity still remains elusive, and silks that exceed the performance limits of industrial fibers are constantly being found. We obtained transcriptome assemblies from 1098 species of spiders to comprehensively catalog silk gene sequences and measured the mechanical, thermal, structural, and hydration properties of the dragline silks of 446 species. The combination of these silk protein genotype-phenotype data revealed essential contributions of multicomponent structures with major ampullate spidroin 1 to 3 paralogs in high-performance dragline silks and numerous amino acid motifs contributing to each of the measured properties. We hope that our global sampling, comprehensive testing, integrated analysis, and open data will provide a solid starting point for future biomaterial designs.

Coordination nanosheets are an emerging class of 2D, bottom-up materials having fully π-conjugated, planar, graphite-like structures with high electrical conductivities. Since their discovery, great effort has been devoted to expand the variety of coordination nanosheets; however, in most cases, their low crystallinity in thick films hampers practical device applications. In this study, mixtures of nickel and copper ions are employed to fabricate benzenehexathiolato (BHT)-based coordination nanosheet films, and serendipitously, it is found that this heterometallicity preferentially forms a structural phase with improved film crystallinity. Spectroscopic and scattering measurements provide evidence for a bilayer structure with in-plane periodic arrangement of copper and nickel ions with the NiCu 2 BHT formula. Compared with homometallic films, heterometallic films exhibit more crystalline microstructures with larger and more oriented grains, achieving higher electrical conductivities reaching metallic behaviors. Low dependency of Seebeck coefficient on the mixing ratio of nickel and copper ions supports that the large variation in the conductivity data is not caused by change in the intrinsic properties of the films. The findings open new pathways to improve crystallinity and to tune functional properties of 2D coordination nanosheets., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Poly(l-serine) (polySer) has tremendous potential as a polypeptide-based functional material due to the utility of the hydroxyl group on its side chain; however, tedious protection/deprotection of the hydroxyl groups is required for its synthesis. In this study, polySer was synthesized by the chemoenzymatic polymerization (CEP) of l-serine ethyl ester (Ser-OEt) or l-serine methyl ester (Ser-OMe) using papain as a catalyst in an aqueous medium. The CEP of Ser-OEt proceeded at basic pH ranging from 7.5 to 9.5 and resulted in the maximum precipitate yield of polySer at an optimized pH of 8.5. A series of peaks detected by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry revealed that the formed precipitate consisted of polySer with a degree of polymerization ranging from 5 to 22. Moreover, infrared spectroscopy, circular dichroism spectroscopy, and synchrotron wide-angle X-ray diffraction measurements indicated that the obtained polySer formed a β-sheet/strand structure. This is the first time the synthesis of polySer was realized by CEP in aqueous solution without protecting the hydroxyl group of the Ser monomer., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Spider silk is a protein-based material whose toughness suggests possible novel applications. A particularly fascinating example of silk toughness is provided by Darwin's bark spider ( Caerostris darwini ) found in Madagascar. This spider produces extraordinarily tough silk, with an average toughness of 350 MJ m -1 and over 50% extensibility, and can build river-bridging webs with a size of 2.8 m 2 . Recent studies have suggested that specific spidroins expressed in C. darwini are responsible for the mechanical properties of its silk. Therefore, a more comprehensive investigation of spidroin sequences, silk thread protein contents and phylogenetic conservation among closely related species is required. Here, we conducted genomic, transcriptomic and proteomic analyses of C. darwini and its close relative Caerostris extrusa . A variety of spidroins and low-molecular-weight proteins were found in the dragline silk of these species; all of the genes encoding these proteins were conserved in both genomes, but their genes were more expressed in C. darwini . The potential to produce very tough silk is common in the genus Caerostris , and our results may suggest the existence of plasticity allowing silk mechanical properties to be changed by optimizing related gene expression in response to the environment.

The helix-sense reversal of poly(β-phenylpropyl l-aspartate) (3PLA) in the solid state was studied by synchrotron wide-angle X-ray diffraction and small-angle X-ray scattering. The direct determination of the characteristic helical pitch before and after the transition revealed that the transition takes place reversibly between the two α-helices having opposite screw-sense during the heating and cooling cycle. While the hexagonal packing remains unaltered, the helix-sense inversion causes discontinuous changes in the molecular arrangement and, by extension, the crystalline dimension. In this study, another transition was detected at a higher temperature from the left-handed α-helix to the π-helix, the molecular chirality being unaffected., (© 2021 European Peptide Society and John Wiley & Sons, Ltd.)

Epoxy resin is indispensable for modern industry because of its excellent mechanical properties, chemical resistance, and excellent moldability. To date, various methods have been used to investigate the physical properties of the cured product and the kinetics of the curing process, but its microscopic dynamics have been insufficiently studied. In this study, the microscopic dynamics in the curing process of a catalytic epoxy resin were investigated under different temperature conditions utilizing X-ray photon correlation spectroscopy. Our results revealed that the temperature conditions greatly affected the dynamical heterogeneity and cross-linking density of the cured materials. An overview of the microscopic mechanism of the curing process was clearly presented through comparison with the measurement results of other methods, such as 1 H-pulse nuclear magnetic resonance spectroscopy. The quantification of such heterogeneous dynamics is particularly useful for optimizing the curing conditions of various materials to improve their physical properties.

Morphological control of C 60 fullerene using liquefied porphyrins ( 1 and 2 ) as the host matrices was explored. Slow evaporation of the solvent of the equimolar mixture of porphyrin and C 60 in toluene afforded the porphyrin/C 60 composite with a 3:1 molar ratio. The stoichiometric binding behaviors suggest that specific porphyrin-C 60 interactions operate the formation of the porphyrin/C 60 composites, as corroborated by spectroscopic and thermal properties, and glazing-incidence wide-angle X-ray diffraction. Under the bulk conditions, the conventional thermodynamic advantage of multiple binding cooperativity for molecular recognition is unlikely to explain the stoichiometric binding behaviors. Instead, we propose a size-matching effect on the porphyrin-C 60 interaction in the bulk porphyrin matrices, i.e., "supramolecular solvation". The glassy nature of the porphyrin matrices was transmitted to C 60 through the specific interaction, and the porphyrin/C 60 composites adopted glassy states at room temperature.

We designed an amphiphilic block copolymer, poly(methyl methacrylate)- block -poly[oligo(2-ethyl-2-oxazoline) methacrylate] (PMMA- b -P[O(Ox)MA]), suitable for bioinert coating. Angular-dependent X-ray photoelectron spectroscopy and neutron reflectivity measurements revealed that the outermost surface of a dried film of PMMA- b -P[O(Ox)MA] was covered with the PMMA block-rich layer. Once the film came into contact with water, the P[O(Ox)MA] bottlebrush block was segregated toward the water interface. This structural rearrangement in the outermost region of the film resulted in the formation of the swollen oligo(oxazoline) layer with excellent bioinertness in terms of the suppression of serum protein adsorption and NIH3T3 fibroblast adhesion.

Because acellular vascular xenografts induce an immunological reaction through macrophage infiltration, they are conventionally crosslinked with glutaraldehyde (GA). However, the GA crosslinking reaction inhibits not only the host immune reaction around the graft but also the graft's enzymatic degradability, which is one of the key characteristics of acellular grafts that allow them to be replaced by host tissue. In this study, we used an 8-arm polyethylene glycol (PEG) to successfully suppress macrophage infiltration, without eliminating graft degradation. Decellularized ostrich carotid arteries were modified with GA or N-hydroxysuccinimide-activated 8-arm PEG (8-arm PEG-NHS), which has a molecular weight of 17 kDa. To evaluate the enzymatic degradation in vitro, the graft was immersed in a collagenase solution for 12 hr. The 8-arm PEG-modified graft was degraded to the same extent as the unmodified graft, but the GA-modified graft was not degraded. The graft was transplanted into rat subcutaneous tissue for up to 8 weeks. Although CD68-positive cells accumulated in the unmodified graft, they did not infiltrate into either modified graft. However, the GA-modified grafts calcified, but the 8-arm PEG-modified graft did not calcify after transplantation. These data suggested that 8-arm PEG-NHS is a promising modification agent for biodegradable vascular xenografts, to suppress acute macrophage infiltration only., (© 2020 Wiley Periodicals, Inc.)

A polypeptide with a GlyHisGly repeating sequence containing zwitterionic structures that effectively interact with cellulose was synthesized for dissociation of cellulose crystals. Polypeptide with the GlyHisGly sequence was synthesized by chemoenzymatic polymerization and postfunctionalization of the His residues was performed to afford imidazolium butyrate on the side chains. The resulting zwitterionic polypeptide effectively dissociated bundles of tunicate cellulose nanocrystals, even when the conditions were mild and the concentration of the polypeptide was as low as 1-2 mg mL -1 . Polypeptide treatment also affected the morphology of the cell walls in cultured plant cells, and the cellulose microfibril networks and amorphous polysaccharide layer were dissociated according to atomic force microscopy (AFM). The zwitterionic polypeptide treatment did not change the crystal structure of the cellulose nanocrystals. Analysis of the mechanical properties of the cellulose nanocrystals by force curve measurements using AFM revealed that the elastic modulus of the cellulose nanocrystals increased after treatment with the zwitterionic polypeptide, indicating that the amorphous part of the cellulose nanocrystals was removed by interactions with the polypeptide. At a concentration of the polypeptide that enabled the dissociation of the cellulose network, the zwitterionic polypeptide showed negligible cytotoxicity to the plant cells. The mild and noncytotoxic technique for loosening cellulose microfibrils/nanocrystals that was developed in this study has tremendous significance for the modification of cellulose in terms of polymer chemistry, material science, and plant biotechnology.

The quinoxalineimide (QI) unit, containing the electron-withdrawing quinoxaline and imide groups, is an electron-deficient building block for organic semiconductor materials. In this study, three fluorinated or chlorinated QIs (QI-1F, QI-2F, and QI-2Cl), have been designed and developed. We report the impact of the fluorination or chlorination of the QI unit on the electronic structures and charge carrier transport properties as compared to unsubstituted QI (QI-2H) bearing the same n -hexyl side chains. The frontier molecular orbital energy levels downshifted with the incorporation of fluorine or chlorine atoms onto the π-framework of QI. Single-crystal structure analyses revealed that all QI-based molecules have an entirely planar backbone and are packed into two-dimensional slipped stacks with diagonal electronic coupling that enables two-dimensional charge carrier transport. Notably, the doubly fluorinated or chlorinated QIs formed compact molecular packing in the single-crystal structures through an infinite intermolecular network relative to unsubstituted QI (QI-2H). The field-effect transistor-based QI molecules exhibited typical n-channel transport properties. As compared to unsubstituted QI (QI-2H), the chlorinated QI exhibited improved electron mobilities up to 7.1 × 10 -3 cm 2 V -1 s -1 . The threshold voltages of the fluorinated or chlorinated QI devices were clearly smaller than that of QI-2H, which reflects the lowest unoccupied molecular orbital levels of the molecules. This study demonstrates that the fluorinated or chlorinated QIs are versatile building blocks in creating n-channel organic semiconductor materials., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The local mechanical properties of crystalline polymer were evaluated using synchrotron radiation X-ray diffraction with 10 μm lateral resolution. A nonoriented isotactic polypropylene (iPP) film with isolated spherulites in a crystallized matrix was used as a model sample. In situ wide-angle X-ray diffraction (WAXD) measurement was performed on the iPP film using a microbeam synchrotron radiation X-ray under sinusoidal strain. The lattice spacing of the crystal planes increased and decreased in response to the applied sinusoidal strain. Local dynamic viscoelastic functions (dynamic storage and loss moduli ( E ' and E ″)) were calculated at room temperature from the relationship between the calculated applied stress and the response strain obtained by dynamic μ-beam WAXD measurement inside and outside of the spherulites. The E ' values inside and outside of spherulite obtained from the change in spacing of the (110) plane were 1.8 and 1.1 GPa, respectively. Furthermore, the E ' value inside of spherulite obtained from the change in spacing of the (1̅13) plane was 6.0 GPa. These values can be explained by the deformation of crystallite, which depends on the direction of crystal planes. The results obtained here revealed that synchrotron radiation X-ray diffraction measurement gives not only structural information but also the local mechanical properties of the materials E '.

An artificial spinning system using regenerated silk fibroin solutions is adopted to produce high-performance silk fibers. In previous studies, alcohol-based agents, such as methanol or ethanol, were used to coagulate silk dope solutions, producing silk fiber with poor mechanical properties compared with those of native silk fibers. The alcohol-based coagulation agents induce rapid β-sheet crystallization of the silk molecules, which inhibits subsequent alignment of the β-sheet crystals. Here, we induce gradual β-sheet formation to afford adequate β-sheet alignment similar to that of native silk fiber. To this aim, we developed an amorphous silk fiber spinning process that prevents fast β-sheet formation in silk molecules by using tetrahydrofuran (THF) as a coagulation solvent. In addition, we apply postdrawing to the predominantly amorphous silk fibers to induce β-sheet formation and orientation. The resultant silk fibers showed a 2.5-fold higher extensibility, resulting in 1.5-fold tougher silk fibers compared with native Bombyx mori silk fiber. The amorphous silk fiber spinning process developed here will pave the way to the production of silk fibers with desired mechanical properties.

Spider dragline silks have attracted intensive attention as eco-friendly tough materials because of their excellent mechanical property and biomass-based origin. Composite films based on a recombinant spider dragline silk protein (ADF3) from Araneus diadematus were prepared by doping with linear or telechelic poly(L-alanine) (L- or T-polyA, respectively) as a reinforcing agent. Higher tensile strength and toughness of the composite films were achieved with the addition of polyA compared with the tensile strength and toughness of the silk-only film. The difference in the reinforcing behavior between L- and T-polyA was associated with their primary structures, which were revealed by wide angle X-ray diffraction analysis. L-polyA showed a tendency to aggregate in the composite films and induce crystallization of the inherent silk β-sheet to afford rigid but brittle films. By contrast, T-polyA dispersion in the composite films led to the formation of β-sheet crystal of both T-polyA and the inherent silk, which imparted high strength and toughness to the silk films.

Fibroblastic adhesion behaviour on films of a poly[(2-methoxyethyl vinyl ether) (PMOVE)-block-(l-lactic acid) (PLLA)], in which the surface was covered with PMOVE, was studied. Fibroblasts were sufficiently sensitive to identify crystalline/non-crystalline regions existing beneath the surface PMOVE layer.

A π-conjugated coordination nanosheet comprising bis(aminothiolato)nickel ( NiAT ) moieties was synthesized by the reaction of Ni(acac) 2 with 1,3,5-triaminobenzene-2,4,6-trithiol at liquid-liquid and gas-liquid interfaces. The sheet thickness could be controlled down to a single layer (0.6 nm). Selected area electron diffraction and grazing incidence X-ray diffraction analyses indicated the formation of a flat crystalline sheet with a kagome lattice stacked in a staggered alignment. NiAT was reversibly interconverted to a bis(iminothiolato)nickel ( NiIT ) nanosheet by the chemical 2H + -2e - reaction, which was accompanied by a drastic change in electrical conductivity from 3 × 10 -6 to 1 × 10 -1 S cm -1 . This change in conductivity was explained by the difference in band structures between NiAT and NiIT . NiAT acted as an efficient electrocatalyst for the hydrogen evolution reaction, showing strong acid durability and an onset overpotential of -0.15 V.

The contrast variation technique by adding sucrose to aqueous solvents as an electron density adjusting reagent was applied to small-angle X-ray scattering (SAXS) from a dual surfactant wormlike micelle consisting of sodium lauryl ether sulfate and coconut fatty acid amido propyl betaine in order to evaluate the flexibility and the cross-sectional structure of the micelle. The salt concentration dependence of the zero-shear and dynamic viscosities were found not to be affected by the cation species nor the presence of sucrose in the solution. SAXS showed that the scattering profile [I(q)] can be fitted a double layer cylinder model. By systematically changing the sucrose concentration (CS), a "matching composition" was found in which the shell layer can become invisible in SAXS for each sodium cation concentration ([Na+]). From this composition, the electron densities of the shell (rhoS) and core (rhoC) layers were evaluated to be 370 and 216 e/nm(-3), respectively. These values were consistent with the chemical structure of the surfactant. At these matching compositions, I(q) was measured at low q range (0.03 nm(-1)1.02 M. In these larger [Na+], the I(q) showed an up-turn deviation from the rigid rod limit (i.e., I(q) proportional, variant q(-1)) at low q, indicating appearance of the flexibility of the cylinder. By applying a wormlike cylinder theory, the Kuhn statistical segment length was evaluated as a function of [Na+]. At the infinite limit of [Na+], the intrinsic Kuhn length (excluding of the electrostatic interactions) can be evaluated to be about 20-40 nm. This value was comparable with that of the wormlike micelles made of nonionic surfactants.

By measurement of the small-angle and wide-angle X-ray scatterings and infrared and Raman spectra and thermal data, microphase separation phenomena have been investigated for a series of polyethylene-poly(ethylene oxide) diblock copolymer (PE-b-PEO) in both the heating and cooling processes and compared with the structural changes occurring inside the PE and PEO domains. The complicated morphological changes between lamella, perforated lamella, gyroid, cylinder, and sphere phases were detected for the copolymer with relatively short PE segments. The orthorhombic crystalline structure of PE was kept unchanged in the lamella-to-gyroid transition. When the PE orthorhombic phase transformed to the pseudohexagonal or rotator phase, the gyroid morphology changed to the cylinder. On the other hand, the diblock copolymer with relatively long PE segment was found to show only the lamellar morphology, in which the order-disorder structural transition between the orthorhombic and pseudohexagonal phases occurred in the PE crystal region. As a possibility, the large difference in morphological change between the copolymers with short and long PE segments has been ascribed to the difference in thermal mobility of PE segments, which is controlled by the conformation of chains and their packing mode, i.e., an extended chain or a folded chain. The extended chains may move thermally and actively along the interfacial boundary in addition to the librational motion around the chain axis, resulting in a variety of morphological changes, whereas the thermal motion of the folded chains may be suppressed because of the geometrical constraint and does not cause such a large-scale morphological change from the lamellar structure. This concept, a thermal activity and geometrical constraint, is considered to be quite important in the interpretation of complicated morphological changes observed for many crystalline-amorphous and crystalline-crystalline diblock copolymers when viewed from the molecular level.

The phase transition behaviors of low-molecular-weight polyethylene-poly(ethylene oxide) (PE-b-PEO) diblock copolymers with the monomeric units of PE/PEO = 17/40 and 39/86 have been successfully investigated through the temperature-dependent measurements of wide-angle X-ray diffraction (WAXD), small-angle X-ray scattering (SAXS), infrared and Raman spectra, as well as thermal analysis. These diblock copolymers had been believed to show only order-to-disorder transition of lamellar morphology in a wide temperature region, but it has been found here for the first time that this copolymer clearly exhibits the three stages of transitions among lamella, gyroid, cylinder, and spherical phases in the heating and cooling processes. The WAXD and IR/Raman spectral measurements allowed us to relate these morphological changes to the microscopic changes in the aggregation states of PEO and PE segments. In the low-temperature region the PEO segments form the monoclinic crystal of (7/2) helical chain conformation and the PE segments of planar-zigzag form take the orthorhombic crystalline phase. These crystalline lamellae of PEO and PE segments are alternately stacked with the long period of 165 Angstroms. In a higher temperature region, where the PEO crystalline parts are on the way of melting but the PE parts are still in the orthorhombic phase, the gyroid morphology is detected in the SAXS data. By heating further, the gyroid morphology changes to the hexagonally packed cylindrical morphology, where the orthorhombic phase of PE segments is gradually disordered because of thermally activated molecular motion and finally transforms to the pseudohexagonal or rotator phase. Once the PE segments are perfectly melted, the higher-order structure changes from the cylinder to the spherical morphology. These morphological transitions might relate to the thermally activated motions of two short chain segments of the diblock copolymer, although the details of the transition mechanism are unclear at the present stage.

An organogel system consisting of trans-(1S,2S)-bis(ureidododecyl)cyclohexane (SS-BUC) and a series of primary alcohols was explored with optical polarizing microscopy (OPM), electron microscopy, circular dichroism (CD), wide-angle X-ray scattering (WAXS), and synchrotron small-angle X-ray scattering (SAXS). OPM, SAXS, and especially WAXS showed that the gel fiber of SS-BUC/methanol gels essentially consists of SS-BUC crystal itself. SAXS showed that the SS-BUC crystal in the gel takes a lamella with a domain spacing of 5.2 nm. When we left the gel at room temperature, the spacing decreased to 3.1 nm after several months. This distance change may correspond to the structural transition from a double-layer structure to an intercalated-layer structure, which was proposed by Feringa et al. (Chem.-Eur. J. 1999, 5, 937-950) as a possible arrangement of the molecular packing. When the gels in ethanol, propanol, butanol, or octanol were examined, they never showed crystalline peaks in WAXS and SAXS, indicating the amorphous nature of the gels. With increasing the alkyl chain length from ethanol to octanol, dramatic changes were observed in the CD spectrum in the 200-500-nm range. Because these CD changes are correlated to the absorbance of urea, those can be considered as the evidence that the solvents strongly relate to the spatial arrangement between the adjacent urea groups. For the amorphous gels, the cross-sectional correlation function [gammaCu] was directly obtained by the inverse Hankel transform of the SAXS data. The value of gammaCu for the gels is decreased with increasing u (distance between the two scattering bodies, see eq 5). Furthermore, it more rapidly decreases than that of the rigid cylinder model. This feature can be explained by the speculation that many solvent molecules permeate into the SS-BUC fiber. There was a clear difference between ethanol and the other gels, indicating that the solvents with a longer alkyl chain give the more permeated and diffused fiber. This permeated fiber (i.e., wet fiber) can rationalize the dramatic CD change, by presuming that the permeated solvent molecules alter the molecular stacking form.