Search

Seamless neural interfaces conjoining neurons and electrochemical devices hold great potential for highly efficient signal transmission across neural systems and the external world. Signal transmission through chemical sensing and stimulation via electrochemistry is remarkable because communication occurs through the same chemical language of neurons. Emerging strategies based on synaptic interfaces, iontronics-based neuromodulation, and improvements in selective neurosensing techniques have been explored to achieve seamless integration and efficient neuro-electronics communication. Synaptic interfaces can directly exchange signals to and from neurons, in a similar manner to that of chemical synapses. Hydrogel-based iontronic chemical delivery devices are operationally compatible with neural systems for improved neuromodulation. In this perspective, we explore developments to improve the interface between neurons and electrodes by targeting neurons or sub-neuronal regions including synapses. Furthermore, recent progress in electrochemical neurosensing and iontronics-based chemical delivery is examined., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

In this study, an aqueous nonlinear synaptic element showing plasticity behavior is developed, which is based on the chemical processes in an ionic diode. The device is simple, fully ionic, and easily configurable, requiring only two terminals-for input and output-similar to biological synapses. The key processes realizing the plasticity features are chemical precipitation and dissolution, which occur at forward- or reverse-biased ionic diode junctions in appropriate reservoir electrolytes. Given that the precipitate acts as a physical barrier in the circuit, the above processes change the diode conductivity, which can be interpreted as adjusting "synaptic weight" of the system. By varying the operating conditions, we first demonstrate the four types of plasticity that can be found in biological system: long-term potentiation/depression and short-term potentiation/depression. The plasticity of the proposed iontronic device has characteristics similar to those of neural synapses. To demonstrate its potential use in comparatively complex information processing, we develop a precipitation-based iontronic synapse (PIS) capable of both potentiation and depression. Finally, we show that the postsynaptic signals from the multiple excitatory or inhibitory PISs can be integrated into the total "dendritic" current, which is a function of time and input history, as in actual hippocampal neural circuits.

In ionic liquids (ILs), the electric double layer (EDL) is where heterogeneous electron transfer (ET) occurs. Nevertheless, the relationship between the EDL structure and its kinetics has been rarely studied, especially for ET taking place in the inner Helmholtz plane (IHP). This is largely because of the lack of an appropriate model system for experiments. In this work, we determined the reorganization energy ( λ ) of Br 2 reduction in a redox-active IL 1-ethyl-1-methylpyrrolidinium polybromide (MEPBr 2 n +1 ) based on the Marcus-Hush-Chidsey model. Exceptionally fast mass transport of Br 2 in MEPBr 2 n +1 allows voltammograms to be obtained in which the current plateau is regulated by electron-transfer kinetics. This enables investigation of the microscopic environment in the IHP of the IL affecting electrocatalytic reactions through reorganization energy. As a demonstration, TiO 2 -modified Pt was employed to show pH-dependent reorganization energy, which suggests the switch of major ions at the IHP as a function of surface charges of electrodes., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Photoelectrochemical (PEC) sensors are usually based on a single output signal, that is, the photocurrent change caused by the (photoelectro)chemical reaction between target analytes and photoelectrodes. However, the photocurrent may be influenced by redox species other than the target analyte; therefore, modifying the surface of photoelectrodes with probes that selectively bind to the analyte is essential. Moreover, even though various surface modification methods have been developed, distinguishing molecularly similar chemicals using PEC sensing systems remains a significant challenge. To address these selectivity issues, we proposed a photoanode-based PEC sensor that utilizes a cathodic transient current as a second output signal in addition to the photocurrent, which arises from the back reduction of photo-oxidized species. Factors influencing the back reduction were investigated by observing the transient photocurrent of hematite photoanodes in the presence of model redox probes. The chemical environment around the electrode-electrolyte interface was manipulated by altering the electrolyte composition or modifying the electrode surface. The favorable interaction between the electrode surface and redox species led to an increase in the extent of back reduction and the cathodic transient current. In addition, the extent of back reduction also depends on the chemical identity of the redox species, such as the kinetics of subsequent chemical reactions. Therefore, the synergistic combination of the photocurrent and the cathodic transient current enabled the differentiated detection of various catecholamine neurotransmitters with a single pristine photoelectrode, which has never been achieved using traditional PEC methods. Revisiting the transient photocurrent can complement conventional PEC applications and offers possibilities for more effective semiconductor-based applications.

It is important but challenging to elucidate the electrochemical reaction mechanisms of organic compounds using electroanalytical methods. Particularly, a rapid and straightforward method that provides information on reaction intermediates or other key electrochemical parameters may be useful. In this work, we exploited the advantages of classic thin-layer electrochemistry to develop a thin-layer electroanalysis microchip (TEAM). The TEAM provided better-resolved voltammetric peaks than under semi-infinite diffusion conditions owing to its small height. Importantly, rapid and accurate determination of the number of electrons transferred, n , was enabled by mechanically confining the microliter-scale volume analyte at the electrode, while securing ionic conduction using polyelectrolyte gels. The performance of the TEAM was validated using voltammetry and coulometry of standard redox couples. Utilizing the TEAM, a (spectro)electrochemical analysis of FM 1-43, an organic dye widely used in neuroscience, was successfully performed. Moreover, the TEAM was applied to study the electrochemical oxidation mechanism of pivanilides and alkyltrifluoroborate salts with different substituents and solvents. This work suggests that TEAM is a promising tool to provide invaluable mechanistic information and promote the rational design of electrosynthetic strategies.

Electrochemistry of the silicon oxide dielectric layer, a notable insulator often used as a gate oxide, is counterintuitive, but addresses fundamental questions to yield novel scientific discoveries. In this minireview, the fundamental electron transfer mechanism of silicon oxide in the electrolyte solution is elucidated. The possible electrochemical reactions to date are discussed in detail, providing numerous potential areas of application which are elaborated and justified. This minireview not only provides background but also guides future research., (© 2021 Wiley-VCH GmbH.)

Photoelectrochemical cells represent one of the promising ways to renewably produce hydrogen (H 2 ) as a future chemical fuel. The design of a catalyst/semiconductor junction for the hydrogen evolution reaction (HER) requires various factors for high performance. In catalytic materials, an intrinsic activity with fast charge-transfer kinetics is important. Additionally, their thermodynamic property and physical adhesion should be compatible with the underlying semiconductor for favorable band alignment and stability during vigorous H 2 bubble formation. Moreover, catalysts, especially non-noble materials that demand a large amount of loading, should be adequately dispersed on the semiconductor surface to allow sufficient light absorption to generate excitons. One of the methods to simultaneously satisfy these conditions is to adopt an interfacial layer between the semiconductor and active materials in HER. The interfacial layer efficiently extracts the electrons from the semiconductor and conveys those to the catalytically active surface. We demonstrate Ag as a 3D interfacial nanostructure of patterned MoS x catalysts for photoelectrochemical HER. The nanostructured porous Ag layer was introduced by a simple chemical process, followed by photoelectrochemical deposition of MoS x to form MoS x /Ag nanostructures in cross-shaped catalyst pattern arrays. Ag modulated the surface electronic property of MoS x to improve the reaction kinetics as well as helped a charge transport at the Ag|p-Si(100) junction. The physically stable adhesion of catalysts was also achieved despite the ∼40 nm thick catalysts owing to the interfacial Ag nanostructure. This work contributes to further understand the complex multistep HER from light absorption to charge transfer to protons, helping to develop cost-effective and efficient photocathodes.

Low-cost catalysts with high activity and durability are necessary to achieve efficient large-scale energy conversion in photoelectrochemical cell (PEC) systems. An additional factor that governs the construction of photoelectrodes for PECs is the spatial control of the catalysts for efficient utilization of photogenerated charge carriers. Here, we demonstrate spatial decoupling of the light-absorbing and catalytic components in hierarchically structured Si-based photocathodes for the hydrogen evolution reaction (HER). By simply modifying a well-known metal-assisted chemical etching procedure, we fabricated a Si nanowire (NW) array-based photocathode with Ag-Pt catalysts at the base and small amounts of the Pt catalyst at the NW tips. This approach simultaneously mitigates the parasitic light absorption by the catalytic layers and recombination of charge carriers owing to the long transport distance, resulting in improved photoelectrochemical HER performance under simulated AM 1.5G illumination., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Ion current rectification (ICR), diodelike behavior in surface-charged nanopores, shows promise in the design of delivery probes for manipulation of neural networks as it can solve diffusive leakages that might be critical in clinical and research applications. However, it has not been achieved because ICR has restrictions in nanosized dimension and low electrolyte concentration, and rectification direction is inappropriate for delivery. Herein, we present a polyelectrolyte gel-filled (PGF) micropipette harnessing inverted ICR as a delivery probe, which quantitatively transports glutamate to stimulate primary cultured neurons with high efficiency while minimizing leakages. Since the gel works as an ensemble of numerous surface-charged nanopores, the current is rectified in the micro-opening and physiological environment. By extending the charge-selective region using the gel, inverted ICR is generated, which drives outward deliveries of major charge carriers. This study will help in exploring new aspects of ICR and broaden its applications for advanced chemical delivery.

In response to the extensive utilization of ionic circuits, including in iontronics and wearable devices, a new method for fabricating a hydrogel-based ionic circuit on a polydimethylsiloxane (PDMS) microchip is reported. Prolonged UV/ozone oxidation combined with proper surface functionalizations and a novel microchip bonding method using thiol-epoxy click reaction enable the robust attachment of the photopolymerized hydrogel to the microchannel surface for eventual operation in electrolytes as an ionic circuit. The stretchable ionic diode constructed on the PDMS microchip shows a superior rectification ratio even under tensile stress and long-term storage stability. Furthermore, the combination of the ionic circuit and unique material properties of PDMS allows us to maximize the versatility and diversify the functionalities of the iontronic device, as demonstrated in a pressure-driven ionic switch and chip-integrated ionic regulator. Its iontronic signal transmission mimicking the excitatory and inhibitory synapses also evinces the potential of the hydrogel-based iontronics on the PDMS microchip as developed toward an aqueous neuromimetic information processor while opening up new opportunities for various bioinspired applications.

The faradaic reaction at the insulator is counterintuitive. For this reason, electroorganic reactions at the dielectric layer have been scarcely investigated despite their interesting aspects and opportunities. In particular, the cathodic reaction at a silicon oxide surface under a negative potential bias remains unexplored. In this study, we utilize defective 200-nm-thick n + -Si/SiO 2 as a dielectric electrode for electrolysis in an H-type divided cell to demonstrate the cathodic electroorganic reaction of anthracene and its derivatives. Intriguingly, the oxidized products are generated at the cathode The experiments under various conditions provide consistent evidence supporting that the electrochemically generated hydrogen species, supposedly the hydrogen atom, is responsible for this phenomenon. The electrogenerated hydrogen species at the dielectric layer suggests a synthetic strategy for organic molecules., Competing Interests: The authors declare no competing interest., (Copyright © 2020 the Author(s). Published by PNAS.)

Color generation based on strategically designed plasmonic nanostructures is a promising approach for display applications with unprecedented high-resolution. However, it is disadvantageous in that the optical response is fixed once the structure is determined. Therefore, obtaining high modulation depth with reversible optical properties while maintaining its fixed nanostructure is a great challenge in nanophotonics. In this work, dynamic color tuning and switching using tungsten trioxide (WO 3 ), a representative electrochromic material, are demonstrated with reflection-type and transmission-type optical devices. Thin WO 3 films incorporated in simple stacked configurations undergo dynamic color change by the adjustment of their dielectric constant through the electrochromic principle. A large resonance wavelength shift up to 107 nm under an electrochemical bias of 3.2 V could be achieved by the reflection-type device. For the transmission-type device, on/off switchable color pixels with improved purity are demonstrated of which transmittance is modulated by up to 4.04:1.

As a novel approach to the in situ real-time investigation of an ITO electrode during the wet etching process, step-excitation Fourier-transform electrochemical impedance spectroscopy (FT-EIS) was implemented. The equivalent circuit parameters (e.g., R ct , C dl ) continuously obtained by the FT-EIS measurements during the entire etching process showed an electrode activation at the initial period as well as the completion of etching. The FT-EIS results were further validated by cyclic voltammograms and impedance measurements of partially etched ITO films using ferri- and ferrocyanide solution in combination with FESEM imaging, EDS, XRD analyses, and COMSOL simulation. We also demonstrated that this technique can be further utilized to obtain intact interdigitated array (IDA) electrodes in a reproducible manner, which is generally considered to be quite tricky due to delicacy of the pattern. Given that the FT-EIS allows for instantaneous snapshots of the electrode at every moment, this work may hold promise for in situ real-time examination of structural, electrokinetic, or mass transfer-related information on electrochemical systems undergoing constantly changing, transient processes including etching, which would be impossible with conventional electroanalytical techniques.

The detection of ions is of critical importance for environmental, industrial, and physiological applications, where sensitive and disposable ion sensing is still challenging. Herein, we present a sensitivity-tunable ion-sensing platform based on reverse electrodialysis, which is suitable for convenient and sensitive on-site analysis of various ions. It is revealed that this sensing system does not require any external power supply, and the sensitivities can be modulated by altering the number of stacks, possibly higher than the theoretical limitation, the Nernstian slope. The sensing system is integrated with a multicolor detection system via the introduction of polyaniline as a reporting material, which enables direct quantitative analysis based on a continuous color change gradient observable with the naked eye. Overall, the adopted approach by introducing reverse electrodialysis represents remarkable progress toward self-powered and disposable ion sensors with high and easily tunable potentiometric sensitivity.

As biological signals are mainly based on ion transport, the differences in signal carriers have become a major issue for the intimate communication between electrical devices and biological areas. In this respect, an ionic device which can directly interpret ionic signals from biological systems needs to be designed. Particularly, it is also required to amplify the ionic signals for effective signal processing, since the amount of ions acquired from biological systems is very small. Here, we report the signal amplification in ionic systems as well as sensing through the modified design of polyelectrolyte hydrogel-based ionic diodes. By designing an open-junction structure, ionic signals from the external environment can be directly transmitted to an ionic diode. Moreover, the minute ionic signals injected into the devices can also be amplified to a large amount of ions. The signal transduction mechanism of the ion-to-ion amplification is suggested and clearly verified by revealing the generation of breakdown ionic currents during an ion injection. Subsequently, various methods for enhancing the amplification are suggested., Competing Interests: The authors declare no conflict of interest.

Over the recent years, the development of neural interface systems has stuck to using electrical cues to stimulate neurons and read out neural signals, although neurons relay signals via chemical release and recognition at synapses. In addition, conventional neural interfaces are vulnerable to cell migration and glial encapsulation due to the absence of connection anchoring the neuron into the device unlike synapses, which are firmly sustained by protein bonding. To close this discrepancy, we conducted an intensive investigation into the induced synapse interface by employing engineered synaptic proteins from a neural interface perspective. The strong potential of induced synaptic differentiation as an emerging neural interfacing technique is demonstrated by exploring its structural features, chemical release kinetics, robustness, and scalability to the brain tissue. We show that the exocytosis kinetics of induced synapses is similar to that of endogenous synapses. Moreover, induced synapses show remarkable stability, despite cell migration and growth. The synapse-inducing technique has broad applications to cultured hippocampal and cortex tissues and suggests a promising method to integrate neural circuits with digital elements.

Platinum is still the most active element for the hydrogen evolution reaction (HER); however, it suffers from its scarcity and high cost. Thus, significant efforts have been dedicated to maximize the catalytic activity with less loading. When Pt is utilized at a semiconductor surface, more factors have to be considered. Placing a catalyst directly in contact with a semiconductor supports the extraction of photogenerated minority carriers as well as boosts the catalytic reactions. In addition, a catalyst should be designed with prudence not to interfere in the light path with respect to absorption at the underlying substrate. Herein, we report the development of planar Si-based photocathodes, covered with a native oxide, for the HER, which also satisfy the prerequisites for the use of a three-dimensionally patterned, flower-like Ag-Pt catalyst. The catalyst consisted of nanoparticles of homogeneously alloyed Ag and Pt, fabricated by a galvanic exchange of Pt with Ag. Importantly, these two elements were proven to have their own functionalities. Ag not only contributed to transporting e- and Had to the Pt for subsequent processes of the HER but also effectively extracted minority carriers by diluting the high work function of Pt, leading to a better Schottky barrier at the catalyst-insulator-semiconductor junction. Furthermore, computational simulation revealed that the proposed catalyst pattern alleviated optical light loss with the increasing catalyst loading compared to the two-dimensional case. Owing to these effects, we could achieve 0.36 V (vs. reversible hydrogen electrode) as an open circuit potential and the near maximum current density of planar p-type Si. The findings in this work suggests deeper insights that could support the design of catalysts for solar-fuel systems.

Light addressable/activated electrochemistry (LAE) has recently attracted attention as it can provide spatially resolved electrochemical information without using pre-patterned electrodes whose sizes and positions are unchangeable. Here, we propose hematite (α-Fe 2 O 3 ) as the photoanode for LAE, which does not require any sort of surface modification for protection or facilitating charge transfer. As experimentally confirmed with various redox species, hematite is stable enough to be used for repetitive electroanalytical measurements. More importantly, it offers exceptionally high spatial resolution so that the "virtual electrode" is exactly as large as the light spot owing to the short diffusion length of the minority carriers. Quantitative analysis of dopamine in this study shows that the hematite-based photoanode is a promising platform for many potential LAE applications including spatially selective detection of oxidizable biomolecules.

A novel pump-free miniaturized reverse electrodialysis (RED) system was designed to provide lasting power transduced from salinity gradients, named solid salt RED (ssRED), and this quasi-battery uses a solid salt instead of electrolyte solution for streamlined usage. It is portable, flexible, comparable in size to a universal serial bus flash drive, and easily activated with a small amount of water. It maintains a constant ionic concentration gradient through precipitation reactions between a pair of different salts. This precipitation-assisted solid salt RED (PssRED) is an unprecedented ionic power source as it can generate steady electricity in the absence of a driving pump. The PssRED was successfully coupled with bipolar electrode (BPE) microchip sensors which require stable ionic electricity and a polyelectrolyte ionic diode to realize a fully ionic circuit. It is envisioned that the range of application could be expanded to supply electromotive force to various devices through an ionic charge flow.

Understanding the conducting mechanisms of dielectric materials under various conditions is of increasing importance. Here, we report the dielectric breakdown (DB) and post-breakdown mechanism of Si/SiO 2 , a widely used semiconductor and dielectric, in an acidic aqueous electrochemical environment. Cathodic breakdown was found to generate conduction spots on the Si/SiO 2 surface. Using scanning electrochemical microscopy (SECM), the size and number of conduction spots are confirmed to increase from nanometer to micrometer scale during the application of negative voltage. The morphologies of these conduction spots reveal locally recessed inverted-pyramidal structures with exposed Si{111} sidewalls. The pits generation preceded by DB is considered to occur via cathodic dissolution of Si and exfoliation of SiO 2 that are induced by local pH increases due to the hydrogen evolution reaction (HER) at the conduction spots. The HER at the conduction spots is more sluggish due to strongly hydrogen-terminated Si{111} surfaces.

Despite numerous reports on iontronic devices, there has been no whole circuit working in aqueous media including even power source. Herein, we introduce complete ionic circuits powered by reverse electrodialysis (RED) for the first time without employing any electronic components. The RED-driven polyelectrolyte diode successfully shows rectification behavior which is verified by monitoring dynamic ion distribution through fluorescence in real-time. We can also turn on and off the voltage applied to the circuit, and apply an arbitrary voltage by precisely manipulating the pressure imposed to an elastic connection tube filled with electrolyte. Furthermore, this new concept containing ionic power source advances to a more sophisticated ionic OR logic gate. The proposed system paves the way to develop not only passive iontronic devices (e.g. current ionic diode), but active ones requiring a source of energy, particularly such as a neuron-like information processor powered by fully ionic systems, and thereby aqueous computers.

Photoelectrochemical (PEC) water splitting provides an attractive route for large-scale solar energy storage, but issues surrounding the efficiency and the stability of photoelectrode materials impose serious restrictions on its advancement. In order to relax one of the photoelectrode criteria, the band gap, a promising strategy involves complementing the conventional PEC setup with additional power sources. Here we introduce a new concept: solar water splitting combined with reverse electrodialysis (RED). RED is a membrane-based power generation technology that produces an electrochemical potential difference from a salinity gradient. In this study, the RED stack serves not only as a separator, but also as an additional tunable power source to compensate for the limited voltage produced by the photoelectrode. A hybrid system, composed of a single-junction p-Si and a RED stack, successfully enables solar water splitting without the need for an external bias. This system provides flexibility in photoelectrode material selection.

For more efficient photoelectrochemical water splitting, there is a dilemma that a photoelectrode needs both light absorption and electrocatalytic faradaic reaction. One of the promising strategies is to deposit a pattern of electrocatalysts onto a semiconductor surface, leaving sufficient bare surface for light absorption while minimizing concentration overpotential as well as resistive loss at the ultramicroelectrodes for faradaic reaction. This scheme can be successfully realized by "maskless" direct photoelectrochemical patterning of electrocatalyst onto an SiO x /amorphous Si (a-Si) surface by the light-guided electrodeposition technique. Electrochemical impedance spectroscopy at various pHs tells us much about how it works. The surface states at the SiO x /a-Si interface can mediate the photogenerated electrons for hydrogen evolution, whereas electroactive species in the solution undergo outer-sphere electron transfer, taking electrons tunneling across the SiO x layer from the conduction band. In addition to previously reported long-distance lateral electron transport behavior at a patterned catalyst/SiO x /a-Si interface, the charging process of the surface states plays a crucial role in proton reduction, leading to deeper understanding of the operation mechanisms for photoelectrochemical water splitting.

We propose a new method for performing in-channel electrochemical detection under a high electric field using a polyelectrolytic gel salt bridge (PGSB) integrated in the middle of the electrophoretic separation channel. The finely tuned placement of a gold working electrode and the PGSB on an equipotential surface in the microchannel provided highly sensitive electrochemical detection without any deterioration in the separation efficiency or interference of the applied electric field. To assess the working principle, the open circuit potentials between gold working electrodes and the reference electrode at varying distances were measured in the microchannel under electrophoretic fields using an electrically isolated potentiostat. In addition, "in-channel" cyclic voltammetry confirmed the feasibility of electrochemical detection under various strengths of electric fields (∼400 V/cm). Effective separation on a microchip equipped with a PGSB under high electric fields was demonstrated for the electrochemical detection of biological compounds such as dopamine and catechol. The proposed "in-channel" electrochemical detection under a high electric field enables wider electrochemical detection applications in microchip electrophoresis.

A biosensor is a sensing device that incorporates a biological sensing element and a transducer to produce electrochemical, optical, mass, or other signals in proportion to quantitative information about the analytes in the given samples. The microfluidic chip is an attractive miniaturized platform with valuable advantages, e.g., low cost analysis requiring low reagent consumption, reduced sample volume, and shortened processing time. Combination of biosensors and microfluidic chips enhances analytical capability so as to widen the scope of possible applications. This review provides an overview of recent research activities in the field of biosensors integrated on microfluidic chips, focusing on the working principles, characteristics, and applicability of the biosensors. Theoretical background and applications in chemical, biological, and clinical analysis are summarized and discussed.

The development and analysis of a microfluidic sample preconcentration system using a highly ion-conductive charge-selective polymer [poly-AMPS (2-acrylamido-2-methyl-1-propanesulfonic acid)] is reported. The preconcentration is based on the phenomenon of concentration polarization which develops at the boundaries of the poly-AMPS with buffer solutions. A negatively charged polymer, poly-AMPS, positioned between two microchannels efficiently extracts cations through its large cross section, resulting in efficient anion sample preconcentration. The present work includes the development of a robust polymer that is stable over a wide range of buffers with varying chemical compositions. The sample preconcentration effect remains linear to over 3 mM (0.15 pmol) and 500 microM (15 fmol) for fluorescein and TRITC-tagged albumin solutions, respectively. The system can potentially be used for concentrating proteins on microfluidic devices with subsequent analysis for proteomic applications.

We finely tuned the Au shell on a polystyrene microsphere of 2 microm in diameter to achieve a strong surface enhanced raman scattering (SERS)-active platform so that the molecules on a single microspherical shell surface produce their own fingerprint SERS spectra. The proposed microshells can be easily and individually manipulated under a conventional optical microscope using a micropipet and act as a sensitive probe to obtain the SERS spectra of the monolayer of molecules on Pt as well as Au surfaces without any requirement of special surface morphology or modification for inducing SERS activity. Well-defined SERS spectra can be obtained at a very short acquisition time of milliseconds, suggesting useful applications of the present system based on the decoding of the SERS-active barcodes on individually functionalized microshells.

Green means go: A polyelectrolyte diode on a microchip exhibits well-defined nonlinear rectifying behavior. This system visualizes the dynamic distribution of ions in a charged polymer phase under an electric field on a real-time basis using fluorescence images (see picture). Multiple polyelectrolyte diodes are integrated on a microchip to produce a variety of logic gates based on ionic circuits.

A microfluidic electroporator operating under a continuous low dc voltage (7 to approximately 15 V) is reported. The proposed electroporation microchip exploits the ionic conductivity of polyelectrolytic gel electrodes to precisely control the electric field that is applied to cells without bubble generation in the microchannel. In this study, pDADMAC (poly diallyldimethylammonium chloride) was used to efficiently apply the electric potential difference to the cells in the microchannels. Impedance analysis showed that the pDADMAC plugs could work as ionic conductors with a conductivity of approximately 16 S m(-1). In accordance with the calculation using CFD-ACE, an input voltage of only 10 V could generate an electric field of 0.9 kV cm(-1) across the microchannel; this meets the requirements for electropermeation. The electropermeation of K562 human chronic leukemia cells was observed in the microchip from 7 V, and the efficiency increased up to 60% upon the application of an input voltage of 15 V with a viability of 80%. An amount of 10(5) cells could be transfected every minute under a constant potential difference. The transfection and expression of DNA plasmids were also successfully demonstrated in the suspension cell line.

The enantiomeric recognition of amines by voltammetry using electroactive macrocyclic molecules, nitroazophenolic crown ethers, is reported. The oxidation potential of the nitroazophenol moiety in nitroazophenols with 18-crown-6 sensitively depends on the structure of alkyl amines. Based on this phenomenon, enantiomeric amines and even the quantitative assay of the R/S ratio in enantiomeric mixtures can be selectively recognized by using 18-crown-6 azophenol (3-H) with chiral centers. In the case of phenylglycinol, the association constants (K) of 3-H for the R and S forms have an R/S value of 3.5. The peak potential of the R form in square-wave voltammograms reproducibly differs from that of the S form by 32 mV, within which the peak potential linearly varies with the enantiomeric ratio. Free energy perturbation and molecular dynamics simulation provide deeper understanding of the enantiomeric recognition in this system. The theoretical analysis indicates that the free energy difference between diastereomeric complexes agrees well with the experimental results, and the pi-pi or charge-charge interaction plays a key role in enantiomeric recognition.

We report the fabrication and analytical functions of a biosensor based on a nanoneedle consisting of a multiwall carbon nanotube attached to the end of an etched tungsten tip. The devised electrode is the smallest needle-type biosensor reported to date. The nanoneedles prepared in this work are 30 nm in diameter and 2-3 microm in length. Dopamine and glutamate, which are physiologically important neurotransmitters, were successfully detected using these nanoneedles. Bare nanoneedles detected dopamine in the range from 100 to 1000 microM by differential pulse voltammetry, and enzyme-modified nanoneedles were able to respond to glutamate in the 100-500 microM range by potentiostatic amperometry.

The nanoporous platinum oxide (H1-ePtO) as a hydrogen ion-selective sensing material is reported. Bare nanoporous platinum oxides exhibit near-Nernstian behavior (e.g., -55 mV/pH in PBS), ignorable hysteresis, a short response time, and high precision, which are remarkably better than those of flat platinum oxides. The electrode potential of a nanoporous platinum oxide responds exclusively to hydrogen ion, which implies its usefulness as a solid-state pH sensor. In the present study, the performance of nanoporous platinum oxide was investigated and compared with that of IrOx in terms of selectivity and the influences of ionic strength, temperature, complexing ligands, and surfactants. H1-ePtO functions well as a pH-sensing solid-state material, and it is viewed as a promising alternative to IrOx. Interference by redox couples was successfully suppressed by covering the H1-ePtO surface with a protective layer, e.g., an electropolymerized polyphenol thin film. Since the nanoporous platinum oxide with such a protective layer is particularly suitable for miniaturization and micropatterning, our findings suggest its usefulness in applications such as solid-state pH sensors embedded in chip-based microanalysis systems.

This paper reports a polyelectrolytic salt bridge-based electrode (PSBE), which is a key embedded unit in a microchip device that can size-selectively count microparticles and measure their velocities. The construction of salt bridges at specific locations within a microfluidic chip enables dc-driven electrical detection to be performed successfully. This is expected to be a competitive alternative to the optical methods currently used in conventional cell sorters. The PSBEs were fabricated by irradiating ultraviolet light over a patterned mask on the parts of interest, which were filled with an aqueous monomer solution containing diallyldimethylammonium chloride. A pair of such PSBEs was easily formed at the two lateral branches perpendicular to the main microchannel and was found to be very useful for dc impedometry. The human blood cells as well as the fluorescent microbeads passing between the two PSBEs produced impedance signals in proportional to their size. The information about the velocity of a microparticle was extracted from a doublet of the dc impedance signals, which were generated when cells or microbeads sequentially passed through two PSBE pairs separated from each other by a fixed distance. The plot of peak amplitude versus velocity of the moving microbeads and cells indicated only a slight correlation between the size and the velocity, which means that the peak amplitude of the dc impedance signals alone can provide information about the size of the cells in a mixture. The experimental results showed a screening rate of over 1000 cells s(-1) and a velocity of the cells of over 100 mm s(-1). Compared with the previously suggested electrical detection system based on metal electrodes, the sensitivity and selectivity in cell detection were remarkably improved. In addition, the detection unit including the operating circuit became innovatively simple and the whole device could be miniaturized.

Mesoporous electrodes provide an unusual opportunity to observe the dramatic transition of the electrochemical potential distribution in vicinity to mesoporous surfaces as the ionic strength varies. The experimental results were in accordance with what the classical Gouy-Chapman theory predicts on the basis of the correlation between Debye length (kappa-1) and the diameter of mesopores. Using the phenomenon that the electrochemically effective area of mesoporous electrode depends on the ionic strength, the faradaic current density of dioxygen reduction could be controlled by the electrolyte concentration.

A new outer layer composition, consisting of polytetrafluoroethylene (PTFE), Kel-F oil, and Nafion, is suggested to minimize the detrimental effect of dissolved oxygen and to extend the linear response range of a glucose oxidase(GOx)-based sensor using nonconducting polymer. The morphology of Kel-F/PTFE/Kel-F/Nafion polymeric laminate was followed during fabrication by SEM. When Kel-F film was formed on the PTFE outer layer, the linear response was extended to 21 mM, at a sensitivity of 2.8 +/- 0.8 nA/mM mm2. We demonstrate that a sensor without Kel-F/PTFE/Kel-F/Nafion outer layer is relatively oxygen dependent, whereas by comparison a sensor with Kel-F/PTFE/Kel-F/Nafion outer layer is oxygen independent. The current of such a glucose sensor implanted in the subcutaneous tissue stabilized within 60 min, and the lag between blood glucose changes and sensor output was within 1 min. The in vivo characteristics of the glucose sensor described show great promise for one-point in vivo calibration.

Roughness of nanoscopic dimensions can be used to selectively enhance the faradaic current of a sluggish reaction. Using this principle, we constructed mesoporous structures on the surfaces of pure platinum electrodes responding even more sensitively to glucose than to common interfering species, such as L-ascorbic acid and 4-acetamidophenol. Good sensitivities, as high as 9.6 microA cm(-2) mM(-1), were reproducibly observed in the presence of high concentration of chloride ion. The selectivities, sensitivities, and stabilities determined experimentally have demonstrated the potential of mesoporous platinum as a novel candidate for nonenzymatic glucose sensors.