Search

The effect of ensiling fermentation and mechanical pretreatment on the methane yield of lignocellulosic biomass was investigated in order to determine the optimum pretreatment conditions for biogas production. Wheat straw was treated using the following techniques: mechanical disintegration by chopping and extruder-grinding to particle sizes of 2.0 and 0.2 cm, respectively, and ensiling by 30% and 45% total solids with addition of enzymatic, chemical and biological silage additives individually and in combination. The total and volatile solid content, biochemical methane potential and products of silage fermentation of 32 variants were tested. The results indicate that the methane potential increased by 26% (from 179 to 244 mL CH 4 g −1 VS) by reducing particle size. The maximum methane potential of 275 mL CH 4 g −1 VS was obtained from silage with 30% total solids and extruder grinding. However, the effect of the addition of silage additives on the methane potential was limited. [ABSTRACT FROM AUTHOR]

The invasive aquatic plant Elodea nuttallii was subjected to hydrothermal carbonization at 200 °C and 240 °C to produce biochar. About 58% w/w of the organic carbon of the pristine plant was translocated into the solid biochar irrespectively of the operating temperature. The process water rich in dissolved organic matter proved a good substrate for biogas production. The E. nuttallii plants showed a high capability of incorporating metals into the biomass. This large inorganic fraction which was mainly transferred into the biochar (except sodium and potassium) may hamper the prospective application of biochar as soil amendment. The high ash content in biochar (∼40% w/w) along with its relatively low content of organic carbon (∼36% w/w) is associated with low higher heating values. Fatty acids were completely hydrolyzed from lipids due to hydrothermal treatment. Low molecular-weight carboxylic acids (acetic and lactic acid), phenols and phenolic acids turned out major organic breakdown products. [ABSTRACT FROM AUTHOR]

Excessive foaming in anaerobic digestion occurs at many biogas plants and can cause problems including plugged gas pipes. Unfortunately, the majority of biogas plant operators are unable to identify the causes of foaming in their biogas reactor. The occurrence of foaming is often related to the chemical composition of substrates fed to the reactor. The consistency of the digestate itself is also a crucial part of the foam formation process. Thus, no specific recommendations concerning substrates can be given in order to prevent foam formation in biogas plants. The safest way to avoid foaming is to test the foaming tendency of substrates on-site. A possible solution is offered by an innovative foaming test. With the help of this tool, biogas plant operators can evaluate the foaming disposition of new substrates prior to use in order to adjust the composition of substrate mixes. [ABSTRACT FROM AUTHOR]

Aquatic macrophytes are important components of aquatic habitats. However, the overgrowth of aquatic plants can cause severe problems for the management of bodies of water. As a result, these plants must be removed and disposed of as waste. However, the usage of this biomass as a substrate in biogas plants would appear to be more beneficial. The present study shows the advantages and barriers to the use of harvested aquatic biomass for energy production in Germany. The results cover several aspects of this issue, such as the question of biomass potential, the quality of the harvested aquatic plants, and ensiling for the purpose of conservation for anaerobic digestion. In addition, the social aspects of the de-weeding in bodies of water are discussed., (© 2018 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

Premise of the Study: To enhance the understanding of the recent invasion process of the clonal waterweed Elodea nuttallii (Hydrocharitaceae), analyses of population structure and genotypic diversity need to be undertaken, for which genetic markers are needed., Methods and Results: High-throughput sequencing of DNA enriched for microsatellites was used to develop 24 loci that were characterized in E. nuttallii , 21 of which were polymorphic, with the number of alleles ranging from two to 10. In two populations, expected heterozygosity ranged among loci between zero and 0.796. In the congener E. canadensis , all markers yielded PCR products, 19 of which were polymorphic, with two to nine alleles and expected heterozygosity ranging from zero to 0.690 in two populations., Conclusions: The markers described should be useful for future studies of population structure and clonal diversity of E. nuttallii as well as E. canadensis in their native and invasive range.

The use of sugar beet in anaerobic digestion (AD) during biogas production can lead to process upsets such as excessive foaming in fermenters. In the present study, foam formation in sugar beet-fed digestates was studied in foaming tests. The increasing disintegration grade of sugar beet was observed to have a promoting effect on foaming in the digestate but did not affect the biogas yield. Chemical analysis of foam and digestate from sugar beet silage AD showed high concentrations of pectin, other carbohydrates and N-containing substances in the foam. Both pectin and sucrose showed little foaming in AD. Nevertheless, sucrose and calcium chloride had a promoting effect on foaming for pectin AD. Salts of divalent ions also enhanced the foam intensity in the case of sugar beet silage AD, whereas ammonium chloride and urea had a lessening effect on sugar beet-based foaming., (Copyright © 2014 Elsevier Ltd. All rights reserved.)