Search

Highly scattering samples, such as polymer droplets or solid-state powders, are difficult to study via coherent two-dimensional infrared (2D IR) spectroscopy. Previously, researchers have employed (quasi-) phase cycling, local-oscillator chopping, and polarization control to reduce scattering, but the latter method poses a limit on polarization-dependent measurements. Here, we present a method for Scattering Elimination Immune from Detector Artifacts (SEIFDA) in pump-probe 2D IR experiments. Our method extends the negative probe delay method of removing scattering from pump-probe spectroscopy to 2D experiments. SEIFDA works well for all polarizations when combined with the optimized noise reduction scheme to remove additive and multiplicative noise. We demonstrate that our method can be employed with any polarization scheme and reliably lowers the scattering at parallel polarization to comparable levels to the conventional 8-frame phase cycling with probe chopping (8FPCPC) at perpendicular polarization. Our system can acquire artifact free spectra in parallel polarization when the signal intensity is as little as 5% of the intensity of the interference between the pump pulses scattered into the detector. It reduces the time required to characterize the scattering term by at least 50% over 8FPCPC. Through detailed analysis of detector nonlinearity, we show that the performance of 8FPCPC can be improved by incorporating nonlinear correction factors, but it is still worse than that of SEIFDA. Application of SEIFDA to study the encapsulation of Nile red in polymer droplets demonstrates that this method will be very useful for probing highly scattering systems.

Inspired by the adaptability of biological materials, a variety of synthetic, chemically driven self-assembly processes have been developed that result in the transient formation of supramolecular structures. These structures form through two simultaneous reactions, forward and backward, which generate and consume a molecule that undergoes self-assembly. The dynamics of these assembly processes have been shown to differ from conventional thermodynamically stable molecular assemblies. However, the evolution of nanoscale morphologies in chemically driven self-assembly and how they compare to conventional assemblies has not been resolved. Here, we use a chemically driven redox system to separately carry out the forward and backward reactions. We analyze the forward and backward reactions both sequentially and synchronously with time-resolved cryogenic transmission electron microscopy (cryoEM). Quantitative image analysis shows that the synchronous process is more complex and heterogeneous than the sequential process. Our key finding is that a thermodynamically unstable stacked nanorod phase, briefly observed in the backward reaction, is sustained for ∼6 hours in the synchronous process. Kinetic Monte Carlo modeling show that the synchronous process is driven by multiple cycles of assembly and disassembly. The collective data suggest that chemically driven self-assembly can create sustained morphologies not seen in thermodynamically stable assemblies by kinetically stabilizing transient intermediates. This finding provides plausible design principles to develop and optimize supramolecular materials with novel properties.

Defect-mediated energy transfer is an energy transfer process between midgap electronic states in a semiconductor nanocrystal (NC) and molecular acceptors, such as fluorescent dye molecules. Super-resolution fluorescence microscopy represents an exciting technique for pinpointing the nanoscale positions of lattice defect sites in, for example, a micrometer-sized particle or thin film sample by spatially resolving the location of the acceptor dye molecules with nanometer resolution. Toward this goal, our group performed ensemble-level, time-resolved fluorescence spectroscopy measurements of ZnO NC/Alexafluor 555 (A555) mixtures and calculated that the emissive defect sites are located, on average, 0.5 nm from the NC surface [Nilsson Z. N.; J. Chem. Phys.2021, 154 ( (5), ), 054704]. However, ensemble-level measurements cannot spatially resolve the defect sites on single particles, nor can they distinguish between surface-adsorbed dye molecules that participate in the energy transfer (EnT) process from those that do not. In this work, we compared the photoluminescence intensity trajectories of 789 isolated, single ZnO NC donors to those of 73 non-specifically bound and five specifically bound ZnO NC/A555 pairs, where the donor and acceptor centroid positions were separated by a distance that was smaller than our localization precision (40 nm). We observed minor fluorescence intensity fluctuations in the donor and defect channels instead of clear anticorrelated intensity fluctuations, which could be explained by (1) the presence of multiple emissive defect sites per NC, (2) donor-acceptor separation distances slightly larger than the Förster radius (R 0 = 3.1 nm; defined as the distance at which EnT is 50% efficient), and/or (3) poor dipole-dipole coupling. The single molecule imaging methodology we developed, an alternating ultraviolet-visible excitation sequence combined with multicolor photon detection, successfully distinguishes specifically bound and non-specifically bound NC/dye pairs and can be applied to study a wide range of hybrid NC/dye energy transfer systems.

Polymerization-induced self-assembly (PISA) has become an important one pot method for the preparation of well-defined block copolymer nanoparticles. In PISA, morphology is typically controlled by changing molecular architecture and polymer concentration. However, several computational and experimental studies have suggested that changes in polymerization rate can lead to morphological differences. Here, we demonstrate that catalyst selection can be used to control morphology independent of polymer structure and concentration in ring-opening polymerization-induced crystallization-driven self-assembly (ROPI-CDSA). Slower rates of polymerization give rise to slower rates of self-assembly, resulting in denser lamellae and more 3D structures when compared to faster rates of polymerization. Our explanation for this is that the fast samples transiently exist in a nonequilibrium state as self-assembly starts at a higher solvophobic block length when compared to the slow polymerization. We expect that subsequent examples of rate variation in PISA will allow for greater control over morphological outcome.

Metal-organic frameworks (MOFs) are a class of porous nanomaterials that have been extensively studied as enzyme immobilization substrates. During in situ immobilization, MOF nucleation is driven by biomolecules with low isoelectric points. Investigation of how biomolecules control MOF self-assembly mechanisms on the molecular level is key to designing nanomaterials with desired physical and chemical properties. Here, we demonstrate how molecular modifications of bovine serum albumin (BSA) with fluorescein isothiocyanate (FITC) can affect MOF crystal size, morphology, and encapsulation efficiency. Final crystal properties are characterized using scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), fluorescent microscopy, and fluorescence spectroscopy. To probe MOF self-assembly, in situ experiments were performed using cryogenic transmission electron microscopy (cryo-TEM) and X-ray diffraction (XRD). Biophysical characterization of BSA and FITC-BSA was performed using ζ potential, mass spectrometry, circular dichroism studies, fluorescence spectroscopy, and Fourier transform infrared (FTIR) spectroscopy. The combined data reveal that protein folding and stability within amorphous precursors are contributing factors in the rate, extent, and mechanism of crystallization. Thus, our results suggest molecular modifications as promising methods for fine-tuning protein@MOFs' nucleation and growth.

Fuel-driven dissipative self-assemblies play essential roles in living systems, contributing both to their complex, dynamic structures and emergent functions. Several dissipative supramolecular materials have been created using chemicals or light as fuel. However, electrical energy, one of the most common energy sources, has remained unexplored for such purposes. Here, we demonstrate a new platform for creating active supramolecular materials using electrically fueled dissipative self-assembly. Through an electrochemical redox reaction network, a transient and highly active supramolecular assembly is achieved with rapid kinetics, directionality, and precise spatiotemporal control. As electronic signals are the default information carriers in modern technology, the described approach offers a potential opportunity to integrate active materials into electronic devices for bioelectronic applications.

The antibiotic teixobactin targets bacterial cell walls. Previous research has proposed that the active form of teixobactin is a nano-/micron-sized supramolecular assembly. Here, we use cryogenic transmission electron microscopy to show that at 1 mg/mL, teixobactin forms sheet-like assemblies that selectively act upon the cell wall. At 4 μg/mL, teixobactin is active, and aggregates are formed either transiently or sparingly at the cell surface.

Fuel-driven dissipative supramolecular assemblies in biology, such as actin filaments and microtubules contribute to the formation of complex, dynamic structures in living organisms and give rise to emergent functions such as motility, homeostasis, self-healing, and camouflage. Several synthetic dissipative supramolecular materials have been created using chemicals or light as fuel, with the goal of furthering our understanding of biological systems and creating synthetic materials that have life-like dynamic properties. However, electrical energy, one of the most common energy sources, has remained mostly unexplored for such purposes. Here we demonstrate the use of electrically fueled dissipative assembly as a new platform for creating active supramolecular materials. Through an electrochemical redox reaction network operating in mild aqueous buffers, a transient and highly active supramolecular assembly based on a redox-sensitive cysteine derivative is achieved by applying an electric potential. The dissipative self-assembly as well as its emergent properties can be spatiotemporally controlled by modulation of electrical signals on patterned microelectrodes. Using electrical energy as a readily available and clean fuel, we are able to create dissipative supramolecular materials rapidly (in seconds to minutes) and repetitively under mild conditions with directional and spatiotemporal control. As electronic signals are the default information carriers in modern technology, the described approach offers a promising opportunity to integrate active materials into electronic devices for bioelectronics applications.

In highly selective solvents, block copolymers (BCPs) form association colloids, while in solvents with poor selectivity, they exhibit a temperature-controlled (de)mixing behavior. Herein, it is shown that a temperature-responsive self-assembly behavior emerges in solvent mixtures of intermediate selectivity. A biocompatible poly-ethylene(oxide)-block-poly-ε-caprolactone (PEO-PCL) BCP is used as a model system. The polymer is dissolved in solvent mixtures containing water (a strongly selective solvent for PEO) and ethanol (a poorly selective solvent for PEO) to tune the solvency conditions. Using synchrotron X-ray scattering, cryogenic transmission electron microscopy, and scanning probe microscopy, it is shown that a rich temperature-responsive behavior can be achieved in certain solvent mixtures. Crystallization of the PCL block enriches the phase behavior of the BCP by promoting sphere-to-cylinder morphology transitions at low temperatures. Increasing the water fraction in the solvent causes a suppression of the sphere-to-cylinder morphology transition. These results open up the possibility to induce temperature-responsive properties on demand in a wide range of BCP systems.

The self-assembly of block copolymers into 1D, 2D and 3D nano- and microstructures is of great interest for a wide range of applications. A key challenge in this field is obtaining independent control over molecular structure and hierarchical structure in all dimensions using scalable one-pot chemistry. Here we report on the ring opening polymerization-induced crystallization-driven self-assembly (ROPI-CDSA) of poly-L-lactide-block-polyethylene glycol block copolymers into 1D, 2D and 3D nanostructures. A key feature of ROPI-CDSA is that the polymerization time is much shorter than the self-assembly relaxation time, resulting in a non-equilibrium self-assembly process. The self-assembly mechanism is analyzed by cryo-transmission electron microscopy, wide-angle x-ray scattering, Fourier transform infrared spectroscopy, and turbidity studies. The analysis revealed that the self-assembly mechanism is dependent on both the polymer molecular structure and concentration. Knowledge of the self-assembly mechanism enabled the kinetic trapping of multiple hierarchical structures from a single block copolymer.

Innovations in liquid-phase electron microscopy (LP-EM) have made it possible to perform experiments at the optimized conditions needed to examine soft matter. The main obstacle is conducting experiments in such a way that electron beam radiation can be used to obtain answers for scientific questions without changing the structure and (bio)chemical processes in the sample due to the influence of the radiation. By overcoming these experimental difficulties at least partially, LP-EM has evolved into a new microscopy method with nanometer spatial resolution and sub-second temporal resolution for analysis of soft matter in materials science and biology. Both experimental design and applications of LP-EM for soft matter materials science and biological research are reviewed, and a perspective of possible future directions is given.

A prospective observational cohort of 20 primary total hip arthroplasty (n = 12) and total knee arthroplasty (n = 8) patients (mean age: 63 ± 6 years) was passively monitored with a consumer-level wearable activity sensor before and 6 weeks after surgery. Patients were clustered by minimal change or decreased activity using sensor data. Decreased postoperative activity was associated with greater pain reduction (-5.5 vs -2.0, P = .03). All patients surpassed minimal clinical benefit thresholds of total joint arthroplasty (TJA) (Hip Disability and Osteoarthritis Score Junior 30.5 vs 20.8, P = .23; Knee Injury and Osteoarthritis Outcome Score Junior 23.3 vs 18.2, P = .77) within 6 weeks. Patients who objectively "take it easy" after TJA may experience less pain with no difference in early subjective outcome. Remote, passive analysis of outpatient wearable sensor data may permit real-time detection of early problems after TJA.

Natural materials, such as collagen, can assemble with multiple levels of organization in solution. Achieving a similar degree of control over morphology, stability and hierarchical organization with equilibrium synthetic materials remains elusive. For the assembly of peptidic materials the process is controlled by a complex interplay between hydrophobic interactions, electrostatics and secondary structure formation. Consequently, fine tuning the thermodynamics and kinetics of assembly remains extremely challenging. Here, we synthesized a set of block co polypeptides with varying hydrophobicity and ability to form secondary structure. From this set we select a sequence with balanced interactions that results in the formation of high-aspect ratio thermodynamically favored nanotubes, stable between pH 2 and 12 and up to 80 °C. This stability permits their hierarchical assembly into bundled nanotube fibers by directing the pH and inducing complementary zwitterionic charge behavior. This block co-polypeptide design strategy, using defined sequences, provides a straightforward approach to creating complex hierarchical peptide-based assemblies with tunable interactions.