Search

The promising application of femtosecond laser filamentation in atmospheric remote sensing brings imperative demand for diagnosing the spatiotemporal dynamics of filamentation. Acoustic emission (AE) during filamentation opens a door to give the insight into the dynamic evolution of filaments in air. In particular, the frequency features of the acoustic emission provide relevant information on the conversion of laser energy to acoustic energy. Here, the acoustic emission of femtosecond laser filament manipulated by energy and the focal lengths was measured quantitatively by a broadband microphone, and the acoustic parameters were compared and analyzed. Our results showed that the acoustic power presents a squared dependence on the laser energy and the bandwidth of the acoustic spectrum showed a significant positive correlation with laser energy deposition. It was found that the spectrum of the acoustic pulse emitted from the middle of the filament has a larger bandwidth compared to those emitted from the ends of the filament and the spectrum of the acoustic pulse is also an indicator of the filament intensity distribution. These findings are helpful for studying the plasma filament properties and complex dynamic processes through acoustic parameters and allow the optimization of remote applications., Comment: 8 pages,5 figures

This manuscript demonstrates the theory, design, and simulation of scattering scanning near field microscopy (s-SNOM) in 0.5THz. A comprehensive simulation model of nanotips' geometry, sample materials, and incident field is established to significantly improve the scattering efficiency and spatial resolution to achieve optimal performance. The theoretical model is based on full-wave simulation and dipole moment analysis which can describe the overall nanotip's geometry information to screen the optimal parameters corresponding to the 0.5THz, which is the center frequency of most THz sources. The customized nanotip can achieve 40 nm $(\lambda / 15000)$ spatial resolution while maintaining an excellent scattering efficiency. This nanotip design method doesn't depend on the homogenization commercial AFM tips, providing an approach for customized nanotip design of THz wave scattering near field microscopy., Comment: 11page, 8figures

The femtosecond laser filamentation is the result of the dynamic interplay between plasma self-focusing and defocusing generated by the multiphoton/tunnel ionization of air molecules. This equilibrium allows the filament to stably propagate over long distances at high power densities, making it a promising tool for remote sensing in chemical and biological applications, detection of air pollution, and lightning control, which has attracted wide attention. Laser-induced filamentation is a highly nonlinear process, and initial conditions such as changes in polarization state can affect the fluorescence emission of N2 molecules excited by the filament in air. In this article, we analyze in detail the effect of polarization state changes on the 337 nm fluorescence signal excited by the filament at a distance of 30 m. It was found that the fluorescence signal intensity of the linear polarization state was higher than that of the circular polarization state. Through analysis of these phenomena, we explore the mechanism of plasma fluorescence emission during the long-range filamentation process of femtosecond laser, including the electron collision model and the polarization effect on the critical power for filamentation. These findings are important for the understanding of the stimulated radiation from filaments and may find applications in remote sensing of electric field and THz radiation., Comment: 11 pages, 3 figures

The effects of turbulence intensity and turbulence region on the distribution of femtosecond laser filaments are experimentally elaborated. Through the ultrasonic signals emitted by the filaments, and it is observed that increasing turbulence intensity and expanding turbulence active region cause an increase in the start position of the filament, and a decrease in filament length, which can be well explained by the theoretical calculation. It is also observed that the random perturbation of the air refractive index caused by atmospheric turbulence expanded the spot size of the filament. Additionally, when turbulence intensity reaches , multiple filaments are formed. Furthermore, the standard deviation of the transverse displacement of filament is found to be proportional to the square root of turbulent structure constant under the experimental turbulence parameters in this paper. These results contribute to the study of femtosecond laser propagation mechanisms in complex atmospheric turbulence conditions, Comment: 9 pages, 4 figures

Femtosecond laser filament-induced plasma spectroscopy (FIPS) demonstrates great potentials in the remote sensing for identifying atmospheric pollutant molecules. Due to the widespread aerosols in atmosphere, the remote detection based on FIPS would be affected from both the excitation and the propagation of fingerprint fluorescence, which still remain elusive. Here the physical model of filament-induced aerosol fluorescence is established to reveal the combined effect of Mie scattering and amplification spontaneous emission, which is then proved by the experimental results, the dependence of the backward fluorescence on the interaction length between filament and aerosols. These findings provide an insight into the complicated aerosol effect in the overall physical process of FIPS including propagation, excitation and emission, paving the way to its practical application in atmospheric remote sensing., Comment: 7 pages, 4 figures

Sea salt aerosols composed mainly of micrometer-sized sodium chloride particles not only pose a potential threat to human health and traffic safety, but also directly affect climate prediction. The long-range and high-precision sensing of sea salt aerosols remains a challenge for existing composition analysis methods. As the development of ultrashort laser technology, femtosecond laser filamentation provides a new opportunity for molecular remote sensing in complex environments. However, the accuracy at long-distance of this method is still hard to meet the demand (<10 ng/m3) for the remote aerosol monitoring. To solve this problem, we built a remote detection system for sea salt aerosol fluorescence spectroscopy and obtained a very high system sensitivity by introducing a terawatt-class high-performance femtosecond laser and optimizing the filament and aerosol interaction length. The system achieves a Na+ detection limit of 0.015 ng/m3 at a detection distance of 30 m, and 0.006 ng/m3 when supplemented with a deep processing learning algorithm., Comment: 13 pages, 3 figures

Accidental exposure to overdose ionizing radiation will inevitably lead to severe biological damage, thus detecting and localizing radiation is essential. Traditional measurement techniques are generally restricted to the limited detection range of few centimeters, posing a great risk to operators. The potential in remote sensing makes femtosecond laser filament technology great candidates for constructively address this challenge. Here we propose a novel filament-based ionizing radiation sensing technology (FIRST), and clarify the interaction mechanism between filaments and ionizing radiation. Specifically, it is demonstrated that the energetic electrons and ions produced by {\alpha} radiation in air can be effectively accelerated within the filament, serving as seed electrons, which will markedly enhance nitrogen fluorescence. The extended nitrogen fluorescence lifetime of ~1 ns is also observed. These findings provide insights into the intricate interaction among ultra-strong light filed, plasma and energetic particle beam, and pave the way for the remote sensing of ionizing radiation., Comment: 13 pages, 6 figures

In this work, sub-ppb aerosol detection is achieved by femtosecond laser filament with a single pulse energy of 4 mJ at a distance of 30 m. A concave mirror with an open aperture of 41.4 cm is employed in an off-axis optical system to focus the femtosecond laser beam and collect the fluorescence of NaCl aerosol. The simulation and experimental results show that the astigmatism can be greatly reduced when femtosecond laser beam is incident non-symmetrically on the concave mirror. Compared with the case that femtosecond laser strikes at the center of the concave mirror, the intensity of the optical filament is increased by 69.5 times, and the detection of limit of sodium chloride aerosol is reduced by 86%, which is down to 0.32 ppb. The improved excitation scheme in this work utilizes the nonsymmetrical beam spot on the concave mirror to compensate the non-symmetry induced by the off-axis setup, reducing the astigmatism of the focusing laser beam and improving the aerosol's detection of limit.

Characterizing the nonlinear optical properties of various materials plays a prerequisite role in nonlinear optics. Among different methods, the well-known Z-scan technique and the modified versions have been recognized as a simple and accurate method for measuring both the real and imaginary parts of the nonlinear refractive index. However, all the Z-scan methods based on detecting small beam variations put forward a severe restriction on the roughness of materials. Therefore, measuring nonlinear optical properties of highly scattering media still remain challenging. Inspired by the innovation of conventional Z-scan method that converting the wavefront phase shift to the easily measurable spatial pattern in far-field, the alternative spectral domain Z-scan technique was presented in this paper. It has a great potential for highly scattering medium, based on the scattering efficiency is insensitive to the wavelength for Mie scattering as the wavelengths are far smaller than the roughness. Moreover, to demonstrate the advantages of spectral domain Z-scan technique, the nonlinear refraction of polished slides and frosted slides was measured, which agrees well with previous reports., Comment: 10 pages, 5 figures