Search

A historic rainstorm occurred over Henan, China, in July 2021 (“7.20” extreme precipitation event), resulting in significant human casualties and socioeconomic losses. A global variable-resolution model (MPAS-Atmosphere v7.3) was employed to simulate this extreme precipitation event. A series of simulations have been done at both quasi-uniform (60 and 15 km) and variable-resolution (60–15 and 60–3 km) meshes from hydrostatic to nonhydrostatic scale with two parameterization scheme suites. For the 48 h peak precipitation duration (20–22 July), the 60–3 km variable-resolution simulation coupled with the scale-aware convection-permitting parameterization scheme suite stands out predominantly among other simulation experiments as it reproduces this extreme precipitation event most accurately. At 15 km resolution, the 60–15 km variable-resolution simulation achieves comparable forecasting skills to the 15 km quasi-uniform simulation but at a much reduced computing cost. In addition, we found that the default mesoscale suite generally outperforms the convection-permitting suite at 15 km resolution as simulations coupled with the convection-permitting suite missed the third peak of this extreme precipitation event, while the mesoscale suite did not. Furthermore, it is found that the large-scale circulation plays a critical role in the peak precipitation simulations at 15 km resolution, via influencing the simulated low-level wind. During the second peak precipitation period, simulations with the convection-permitting parameterization scheme suite at 15 km resolution generate a prominent low-level easterly wind component bias, which is largely attributed to the excessively evaporative cooling in the lower troposphere. This study further reveals that at 15 km resolution the diabatic heating from the grid-scale precipitation accounts more for the low-level wind bias than the convective-scale precipitation. Given that two different cloud microphysics schemes, namely Thompson and WSM6 schemes, are used in the convection-permitting and default mesoscale parameterization scheme suites, respectively, these microphysics schemes are found to be the primary contributor to the low-level wind simulation bias.

Surface reflectance data is the basic data source for the hyperspectral parametric remote sensing products and remote sensing quantitative application, which is widely used in various application fields such as natural resources and ecological environment monitoring. At present, multispectral data takes the leading role among the common land surface reflectance datasets and the reflectance data mainly involves the types of ground objects such as farmland, forest land, water body, soil, etc., while the datasets relatively less targets the types of rock and mineral surface objects, yet especially the reflectance datasets with the combination of time series and multi-scale satellite-earth are even more scarce. In order to better promote the application of hyperspectral surface reflectance and explore the advantages of joint application of satellite-earth multi-scale reflectance data, on the basis of field-measured rock and mineral target spectral, a comprehensive surface reflectance dataset was generated by using domestically produced hyperspectral satellite data as the data source in this study, mainly focusing on the typical ore concentration area in the Hami Remote Sensing test field in Xinjiang. The dataset includes multi-period hyperspectral satellite surface reflectance images, field measured rock and mineral spectral data, and multi-period sub-pixel spectral data collected based on ground spectral measured points, which can provide significant support for the research and development and accuracy verification as well as performance evaluation of algorithms such as surface reflectance inversion, mineral identification and ground object classification.

A detailed understanding of snow cover and its possible feedback on climate change on the Tibetan Plateau (TP) is of great importance. However, spatiotemporal variability in snow phenology (SP) and its influencing factors on the TP remain unclear. Based on the daily gap-free snow cover product (HMRFS-TP) with 500 m resolution, this study investigated the spatiotemporal variability in snow cover days (SCDs), snow onset date (SOD), and snow end date (SED) on the TP from 2002 to 2022. A structural equation model was used to quantify the direct and indirect effects of meteorological factors, geographical location, topography, and vegetation greenness on SP. The results indicate that the spatial distribution of SP on the TP was extremely uneven and exhibited temporal heterogeneity. SP showed vertical zonality influenced by elevation (longer SCD, earlier SOD, and later SED at higher elevations). A total of 4.62 % of the TP area had a significant decrease in SCDs, at a rate of −1.74 d yr−1. The SOD of 2.34 % of the TP area showed a significant delayed trend, at a rate of 2.90 d yr−1, while the SED of 1.52 % of the TP area had a significant advanced trend, at a rate of at −2.49 d yr−1. We also found a strong elevation dependence for the trend in SCDs (R=-0.73). Air temperature, precipitation, wind speed, and shortwave radiation can directly affect SP as well as indirectly affect it by influencing the growth of vegetation, whereas the direct effect was much greater than the indirect effect. Geographical location (latitude and longitude) and topographic conditions (elevation and slope) indirectly affected SP by modulating meteorological conditions and the growth of vegetation. Vegetation primarily influences SP by intercepting the snow and regulating the balance of the solar radiation budget. Regarding the total effect, air temperature was found to be the dominant factor. This study contributes to the understanding of snow variation in response to global warming over the past 2 decades by providing a basis for predicting future environmental and climate changes and their impacts on the TP.

Dicke state is one of the most useful multipartite quantum states. In this paper, by utilizing the method of designing the evolution operators to construct shortcuts to adiabatic passages (STAP), we have implemented the fast preparation of Dicke states |D3(2)〉 and |D4(2)〉 with one step. Specifically, with the assistance of quantum Zeno dynamics, the original Hamiltonian of the system is simplified into an effective Hamiltonian. Under the dynamic evolution of this effective Hamiltonian, the pulse control is realized by selecting two appropriate auxiliary parameters. This not only greatly shortens the evolution time but also optimizes the operation of the quantum system. In addition, we have discussed the effects of decoherence, parameter fluctuations and noise on fidelity. The results indicate that the proposed protocol maintains high fidelity. Finally, the fast preparation of Dicke state |Dn(2)〉 can be achieved based on the same method.

Remote sensing (RS) and earth observing technology are flourished with the development of a series of high-resolution earthobservation satellites. As the improvement of China’s earth observation data acquisition capability, one critical issue is put on the agenda that is what kind of models and techniques can promote the future data processing into a new level in terms of service model, massive data processing, development methods, business models, resource sharing, and system sustainability (1). In order to embed domestic satellite advantages into global world and provide increasingly more Chinese wisdom and solution to support the ASEAN regional development, China highlights the propositions on ASEAN-China remote sensing cooperation. On November 1, 2022, the ASEAN-China Satellite Remote Sensing Application Centre (hereinafter referred to as the ACSAC) was officially inaugurated in Beijing. The ACSAC will mainly focus on the establishment of a system and mechanism for a series of substantive operation, promoting the comprehensive sharing of China's land and ocean satellite data, comprehensively rich the international application scenarios of Chinese satellites, promoting applications in multiple fields and carrying out satellite remote sensing application promotion and typical demonstration, continuing to carry out technical exchanges and training with mutual demands and development. At present, ACSAC has stepped into the substantive construction stage. It will give full play to the advantages of China's natural resources land and ocean satellite remote sensing resources, to form a multi-scale, full coverage data resource support, jointly carry out the construction of the ASEAN-China satellite remote sensing data network platform based on the cloud environment, and to jointly build an integrated service open portal for land and ocean satellite data products to ASEAN region. Focusing on the core construction content of ACSAC, this paper systematically collects, summarizes and analyse the data and application needs of satellite remote sensing in ASEAN countries, finds out the current needs to meet the gap, and puts forward some thoughts and ideas on cooperation mechanism, data sharing, customized products and application demonstration of advanced products, aiming to lay a solid foundation for the substantial construction of ACSAC.

To improve the overall performance of marine centrifugal pumps (MCPs), their vibration and noise performances were optimized using the hydraulic design of the volute casing parameters considering a constant hydraulic performance at a specific speed of 66.7. Numerical simulations of the full flow field, vibration, and noise were conducted for each of five volute base circle diameters. The impact of dynamic and static disturbances on the flow and vibration and noise characteristics were investigated. These results provide some theoretical and technical support for the design and application of MCPs. The flow pattern inside the volute becomes more uniform as the D3 increases, but the pressure pulsation decreases. The total vibration levels of the inlet flange, outlet flange, and pump base decreased by 8.3%, 7.9%, and 12.3% respectively. The sound pressure of the flow noise at each characteristic frequency showed a different degree of decreasing trend.

Present and historical climate conditions jointly determine contemporary biodiversity patterns and ecosystem functions. However, it remains unclear how contemporary climate and paleoclimate changes together affect the three dimensions of biodiversity (i.e., taxonomic diversity, functional diversity and phylogenetic diversity) and their relationship with ecosystem functions. Here, we assess the impact of current climate, paleoclimate and its anomalies on contemporary biodiversity and ecosystem functions. We estimated the taxonomic, functional and phylogenetic diversity of grassland on the Mongolian Plateau using vegetation survey data and trait information. We then used random forest and structural equation models to assess the relative importance of the present, the Mid-Holocene and the Last Glacial Maximum climate as well as paleoclimate changes as determinants of diversity and aboveground biomass. Our results showed that paleoclimate changes and modern climate jointly determined contemporary biodiversity patterns, while community biomass was mainly affected by modern climate, namely the aridity index. Modern aridity and temperature were two major influences on all three dimensions of biodiversity. Mid-Holocene climate anomalies had a strong effect on species richness and phylogenetic diversity, while functional diversity had mainly been affected by temperature anomalies since the Last Glacial Maximum. These findings suggest that contemporary biodiversity patterns may be affected by processes at divergent temporal scales. Our results show that simultaneously exploring the response of the three dimensions of biodiversity in different periods of climate change and the theoretical framework for its impact on community biomass is helpful to provide a more comprehensive understanding of patterns of biodiversity and its relationship with ecosystem functions.

Compound-specific hydrogen isotopes have increasingly been used as a powerful proxy for investigating biogeochemical cycles and climate change over the past 2 decades. Understanding the hydrogen isotope in extant organisms is fundamental for us to interpret such isotope signals preserved in natural environmental samples. Here, we studied the controls on hydrogen isotope fractionation between fatty acids and growth water by an Fe-reducing heterotrophic marine bacterium Shewanella piezotolerans WP3 growing on different organic substrates, including N-acetyl-D-glucosamine (GlcNac), glucose, acetate, pyruvate, L-alanine, and L-glutamate. Meanwhile, we also evaluated the impact of growth temperature on the hydrogen isotope composition of fatty acids using GlcNac as the sole organic substrate. Our results show that the abundance-weighted mean fatty-acid / water fractionations (εFA/water) display considerable variations for cultures grown on different substrates. Specifically, WP3 yielded the most 2H-enriched fatty acids growing on L-glutamate and pyruvate with an εFA/water of 52 ± 14 ‰ and 44 ± 4 ‰, respectively, and exhibited 2H depletion using GlcNac (−76 ± 1 ‰) and glucose (−67 ± 35 ‰) as sole carbon sources and relatively small fractionations on acetate (23 ± 3 ‰) and L-alanine (−4 ± 9 ‰). Combined with metabolic model analysis, our results indicate that the central metabolic pathways exert a fundamental effect on the hydrogen isotope composition of fatty acids in heterotrophs. Temperature also has an obvious influence on the δ2H values of fatty acids, with strong 2H depletion at an optimal growth temperature (−23 ± 2 ‰ and −23 ‰ growing at 15 and 20 ∘C, respectively) and relatively small fractionations at non-optimal temperatures (4 ± 5 ‰, −4 ± 12 ‰, and 15 ± 41 ‰ at 4, 10, and 25 ∘C, respectively). We hypothesized that this may be associated with temperature-induced enzyme activity for nicotinamide adenine dinucleotide phosphate (NADPH) production. This study helps understand the controlling factors of hydrogen isotope fractionation by marine bacteria, laying the foundation for further interpreting the hydrogen isotope signatures of lipids as an important proxy to decode the biogeochemical cycles and ecological changes in marine sediments.

To reduce the noise in a pump piping system and increase the usage time of equipment, a new type of porous muffler is proposed in this paper. A water guide cone is incorporated into the muffler structure, which may help to redirect the fluid media in the piping system. The porous structure is adapted from a muffler shell, water cone wall and round bottom plate. According to this structure, the muffler sample is made, and a pump pipeline system test bench is set up. The outlet noise of the pump pipeline system is measured after installing the muffler. At the same time, the muffler is numerically simulated by combining computational fluid mechanics and Lighthill acoustic theory. The characteristics of the flow field and external sound field under three different flow conditions of 200 m3/h, 400 m3/h and 600 m3/h are assessed. The numerical simulation results show the same dominant frequency and trend as the experimental results. The rationality of the numerical simulation is verified. Research shows that: the level of sound pressure at the muffler's outlet is lower than at the inlet, causing muffling, and the characteristics of a quadrupole sound source appear at the outlet. The proposed muffler has a certain effect in reducing noise in the pump pipeline system.

Scientific knowledge about light absorption by aerosols is extremely limited at the eastern slope of the Tibetan Plateau (ESTP). We conducted the first aerosol field experiment at six sites (Chengdu, Sanbacun, Wenchuan, Lixian, Maerkang, Hongyuan) along the ESTP, ranging in elevation from 500 to 3500 m. The fraction of light absorption by brown carbon (BrC) to total carbon increases from 20 % to 50 % with altitude, and the mass absorption efficiency (MAE) of BrC over the Tibetan Plateau (TP) is 2–3 times higher than that inside the Sichuan Basin (SCB), especially in winter. In contrast, the MAE of elemental carbon (EC) in winter decreases with altitude. The contrasting variation of EC and BrC MAE with altitude is mainly attributed to source differences between the TP and SCB. Emissions from the more urban sources (motor vehicles, industries, etc.) inside the SCB fail to be transported to the TP due to the stable air in winter inside the basin, which is also favourable for aerosol ageing to enhance absorption efficiency. The radiative forcing of BrC relative to EC varies from 0.10 to 0.42 as altitude increases with the higher organic carbon (OC) to EC ratio over the TP than SCB. Thus, the reason for the enhanced relative BrC to EC radiative forcing from polluted SCB to pristine TP is that the BrC concentration decreases more slowly than the EC concentration with altitude. This study contributes to the understanding of the difference in light absorption by EC and BrC with altitude, from polluted lower-altitude basins to the pristine TP, and provides a data set for regional climate model validation.

The Jacobi linear iterative method and weight Jacobi method (WJM) are introduced for solving the large-scale linear problem in the proximity effect correction (PEC) of electron beam lithography. Based on the discussion of PEC physics, a symmetrical and positive defined proximity interaction matrix is constructed to ensure the convergence of the methods. It shows that zeroing the center exposure fraction in the point spread function matrix is equal to the operation of splitting the proximity interaction matrix. Then, the Jacobi method is ready for the PEC calculation. The iterative can be performed in the Fourier domain due to the inherent parallelization of the Jacobi method. The convergent property of the Jacobi method is discussed and then testified by the PEC simulation. Compared with the classical Jacobi method, an improvement of 100% in convergence efficiency can be achieved by introducing the optimized relaxation parameter quasi-ωopt in the WJM. By combining the WJM and Gold nonlinear iteration method, a new method that shows an order of magnitude superior in accuracy to the WJM is proposed. Results indicate the methods introduced here could be used to calculate the PEC problem efficiently.

Aerosol–planetary boundary layer (PBL) interaction has been proposed as a key mechanism for stabilizing the atmosphere and exacerbating surface air pollution. Although the understanding of this process has progressed enormously, its magnitude and impact remain uncertain and vary widely concerning aerosol types, vertical distributions, synoptic conditions, etc. In this study, our primary interest is to distinguish the aerosol–PBL interaction of absorbing and scattering aerosols under contrasting synoptic patterns and aerosol vertical distributions. Detailed in situ aircraft (King Air 350) measurements and online coupled model Weather Research and Forecasting with Chemistry (WRF-Chem) simulations are explored over the North China Plain (NCP). Furthermore, a long-term PBL stability trend from 1980 to 2020 over the NCP is also investigated. The aircraft measurements and surface observations show that the surface air pollution over the city of Baoding on 3 January is heavier than that on 4 January 2020. In addition, the aerosols are restricted to the low layer on 3 January, whereas the aerosols mix more homogeneously in an upwards direction on 4 January. Thus, we focus on the 2 d with distinct synoptic circumstances, PBL stability, and aerosol vertical distributions over the NCP. According to the WRF-Chem modeling, the synoptic pattern over Baoding differs between the 2 d. The prevailing wind direction is opposite with a southwesterly wind on 3 January and a northeasterly wind on 4 January. The results indicate that the synoptic condition may affect the PBL thermal structure, thus affecting the aerosol vertical distribution. Additionally, the sensitive numerical experiments reveal that the light-absorbing and light-scattering aerosols have different effects on altering the PBL thermal structure. The inhibition effect of scattering aerosols on the PBL appears to be independent of the aerosol height distribution and solely depends on its concentration. However, the aerosol–PBL feedback of absorbing aerosols is highly dependent on its vertical distribution. Besides the 2 d case investigation, the analysis of the modeling results for nearly 1 month from 3 to 30 January 2020 in Baoding yields a more robust and representative conclusion. Our analysis highlights that we should principally concentrate on controlling the emissions of scattering aerosols under the stable stratification, while cooperating to control the emissions of scattering and absorbing aerosols in an unstable stratification. Moreover, the long-term interannual variation in the PBL stability shows a strong correlation with the East Asian winter monsoon, which seems to be valuable in determining which pollutants to target in different monsoon years and attaining more precise air pollution control. Based on the numerical simulations and observational constraints, a concept scheme description has been concluded to deepen our recognition of the interactions between thermodynamic stability and aerosols within the PBL over the NCP region.

By using the multi-source data of meteorology over recent decades, this study discovered a summertime “hollow wet pool” in the troposphere with a center of high water vapor over the Asian water tower (AWT) on the Tibetan Plateau (TP), which is indicated by a vertical transport “window” in the troposphere. The water vapor transport in the upper troposphere extends from the vertical transport window over the TP with significant connections among the Arctic, Antarctic and TP regions, highlighting the effect of the TP's vertical transport window of water vapor in the troposphere on global change in water vapor. The vertical transport window is built by the AWT's thermal forcing in association with the dynamic effect of the TP's “hollow heat island”. Our study improves the understanding of the vapor transport over the TP with important implication for global climate change.

To research the effect of the volute geometry on the radial force characteristics of the centrifugal pump during the starting process, choosing a centrifugal pump with a head of 87m as the research object. The pumping chamber is redesigned into a single-volute and a double-volute with similar external characteristics, and a circulation pipeline system is established. RNG k-ε turbulence model is employed to calculate the unsteady starting process of two kinds of centrifugal pumps. The variation trends of radial force received by the impeller and volute during the start-up process are obtained. The radial force characteristics and internal flow field evolution of two centrifugal pumps are compared and analyzed. The results show that the radial force vector distribution of the impeller changes in spiral periodicity during the startup process, and the spiral geometry is influenced by the number of impeller blades. The direction of the spiral is opposite to the rotational speed. The double-volute geometry can effectively reduce the radial force and pulsation amplitude of the impeller during the start-up process of the centrifugal pump, reducing the radial force by about 80% at rated speed. But the radial force vector distribution of the double-volute is more complicated and disordered than the single-volute.

To provide comprehensive information that will assist in making decisions regarding the adoption of lidar-assisted control (LAC) in wind turbine design, this paper investigates the impact of different turbulence models on the coherence between the rotor-effective wind speed and lidar measurement. First, the differences between the Kaimal and Mann models are discussed, including the power spectrum and spatial coherence. Next, two types of lidar systems are examined to analyze the lidar measurement coherence based on commercially available lidar scan patterns. Finally, numerical simulations have been performed to compare the lidar measurement coherence for different rotor sizes. This work confirms the association between the measurement coherence and the turbulence model. The results indicate that the lidar measurement coherence with the Mann turbulence model is lower than that with the Kaimal turbulence model. In other words, the potential value creation of LAC based on simulations during the wind turbine design phase, evaluated using the Kaimal turbulence model, will be diminished if the Mann turbulence model is used instead. In particular, the difference in coherence is more significant for larger rotors. As a result, this paper suggests that the impacts of different turbulence models should be considered uncertainties while evaluating the benefits of LAC.

Satellite remote sensing aerosol optical depth (AOD) and meteorological elements were employed to invert PM2.5 (the fine particulate matter with a diameter below 2.5 µm) in order to control air pollution more effectively. This paper proposes a restricted gradient-descent linear hybrid machine learning model (RGD-LHMLM) by integrating a random forest (RF), a gradient boosting regression tree (GBRT), and a deep neural network (DNN) to estimate the concentration of PM2.5 in China in 2019. The research data included Himawari-8 AOD with high spatiotemporal resolution, ERA5 meteorological data, and geographic information. The results showed that, in the hybrid model developed by linear fitting, the DNN accounted for the largest proportion, and the weight coefficient was 0.62. The R2 values of RF, GBRT, and DNN were reported as 0.79, 0.81, and 0.8, respectively. Preferably, the generalization ability of the mixed model was better than that of each sub-model, and R2 (determination coefficient) reached 0.84, and RMSE (root mean square error) and MAE (mean absolute error) were reported as 12.92 and 8.01 µg m−3, respectively. For the RGD-LHMLM, R2 was above 0.7 in more than 70 % of the sites and RMSE and MAE were below 20 and 15 µg m−3, respectively, in more than 70 % of the sites due to the correlation coefficient having a seasonal difference between the meteorological factor and PM2.5. Furthermore, the hybrid model performed best in winter (mean R2 was 0.84) and worst in summer (mean R2 was 0.71). The spatiotemporal distribution characteristics of PM2.5 in China were then estimated and analyzed. According to the results, there was severe pollution in winter with an average concentration of PM2.5 being reported as 62.10 µg m−3. However, there was only slight pollution in summer with an average concentration of PM2.5 being reported as 47.39 µg m−3. The period from 10:00 to 15:00 LT (Beijing time, UTC+8 every day is the best time for model inversion; at this time the pollution is also high. The findings also indicate that North China and East China are more polluted than other areas, and their average annual concentration of PM2.5 was reported as 82.68 µg m−3. Moreover, there was relatively low pollution in Inner Mongolia, Qinghai, and Tibet, for their average PM2.5 concentrations were reported below 40 µg m−3.

Urban air pollution has tremendous spatial variability at scales ranging from kilometers to meters due to unevenly distributed emission sources, complex flow patterns, and photochemical reactions. However, high-resolution air quality information is not available through traditional approaches such as ground-based measurements and regional air quality models (with typical resolution > 1 km). Here we develop a 10 m resolution air quality model for traffic-related CO pollution based on the Parallelized Large-Eddy Simulation Model (PALM). The model performance is evaluated with measurements obtained from sensors deployed on a taxi platform, which collects data with a comparable spatial resolution to our model. The very high resolution of the model reveals a detailed geographical dispersion pattern of air pollution in and out of the road network. The model results (0.92 ± 0.40 mg m−3) agree well with the measurements (0.90 ± 0.58 mg m−3, n=114 502). The model has similar spatial patterns to those of the measurements, and the r2 value of a linear regression between model and measurement data is 0.50 ± 0.07 during non-rush hours with middle and low wind speeds. A non-linear relationship is found between average modeled concentrations and wind speed with higher concentrations under calm wind speeds. The modeled concentrations are also 20 %–30 % higher in streets that align with the wind direction within ∼ 20∘. We find that streets with higher buildings downwind have lower modeled concentrations at the pedestrian level, and similar effects are found for the variability in building heights (including gaps between buildings). The modeled concentrations also decay fast in the first ∼ 50 m from the nearest highway and arterial road but change slower further away. This study demonstrates the potential of large-eddy simulation in urban air quality modeling, which is a vigorous part of the smart city system and could inform urban planning and air quality management.

Cavitation monitoring is particularly important for pump efficiency and stability. It is easy to misjudge cavitation by using a given threshold of a single eigenvalue. In this work, based on the vibration signal, a method for multi-resolution cavitation status recognition of centrifugal pump is proposed to improve the accuracy and universality of cavitation status recognition., wavelet packet decomposition (WPD) is used to extract the statistical eigenvalues of multi-scale time-varying moment of cavitation signal after reducing the clutter, such as root mean square value, energy entropy value and so on. The characteristic matrix is constructed. Principal component analysis method (PCA) is employed to reduce the dimension of the characteristic matrix and remove the redundancy, which constructs the radial basis function (RBF) neural network as the input. The results show that the overall recognition rate of non-cavitation, inception cavitation and serious cavitation by using the vibration signal of one measuring point is more than 97.7%. The recognition rate of inception cavitation is more than 80%. Based on the vibration signal information fusion method of two measuring points, the recognition rate of centrifugal pump inception cavitation status reaches more than 99%, and the recognition rate of vibration signal information fusion method of three measuring points reaches 100% for all three cavitation statuses. Due to the influence of factors such as change of external excitation and abrupt change of working conditions, sensor data acquisition is often subjected to unpredictable disturbance. To study the ability of single-point cavitation status recognition method to resist unknown disturbances, by constantly adjusting the value of the interference coefficient of the interference term. It is found that the recognition rate of cavitation status using single measuring point decreases almost linearly with the increase of the interference coefficient. When five measuring points are used for information fusion cavitation status recognition, the cavitation status recognition rate still reaches over 90% even if the interference factor of one measuring point reaches 50%.

Rumen-protected betaine (RPB) can enhance betaine absorption in the small intestine of ruminants, while betaine can alter fat distribution and has the potential to affect the meat quality of livestock. Hence, we hypothesized that RPB might also affect the meat quality of lambs. Sixty male Hu sheep of similar weight (30.47 ± 2.04 kg) were selected and randomly subjected to five different treatments. The sheep were fed a control diet (control treatment, CTL); 1.1 g/day unprotected-betaine supplemented diet (UPB); or doses of 1.1 g/day (low RPB treatment; L-PB), 2.2 g/day (middle RPB treatment; M-PB) or 3.3 g/day (high RPB treatment; H-PB) RPB-supplemented diet for 70 days. Slaughter performance, meat quality, fatty acid and amino acid content in the longissimus dorsi (LD) muscle, shoulder muscle (SM) and gluteus muscle (GM) were measured. Compared with CTL, betaine (including UPB and RPB) supplementation increased the average daily weight gain (ADG) (P < 0.05) and average daily feed intake (P < 0.01) of lambs. Rumen-protected betaine increased ADG (P < 0.05) compared with UPB. With increasing RPB doses, the eye muscle area of the lambs linearly increased (P < 0.05). Compared with CTL, betaine supplementation decreased water loss (P < 0.05) in SM and increased pH24 in the SM (P < 0.05) and GM (P < 0.05). Compared with UPB, RPB decreased water loss in the GM (P < 0.01), decreased shear force (P < 0.05) in the LD and SM and increased the pH of the meat 24 h after slaughter (pH24). With increasing RPB doses, the shear force and b* value in the LD linearly decreased (P < 0.05), and the pH24 of the meat quadratically increased (P < 0.05). Compared with CTL, betaine supplementation increased the polyunsaturated fatty acid in the GM (P < 0.05). Compared with UPB, RPB supplementation decreased the saturated fatty acid (SFA) content in the LD (P < 0.05) and increased the unsaturated fatty acids (UFA), mono-unsaturated fatty acids and UFA/SFA ratio in the LD (P < 0.05). Compared with CTL, the content of histidine in the LD increased with betaine supplementation. Compared with UPB, RPB supplementation increased the content of total free amino acids and flavor amino acids in the LD of lambs (P < 0.05). With increasing RPB, the isoleucine and phenylalanine contents in the LD linearly increased (P < 0.05). Overall, the data collected indicated that the meat quality of lambs (especially in the LD) improved as a result of betaine supplementation, and RPB showed better effects than those of UPB.

Lidar is an effective tool for high-altitude atmospheric measurement in which a weak absorption line for the target gas is selected to ensure a large optical depth. The laser frequency stabilization to the line center is required, and a sub-Doppler (sD) spectroscopy of the target line is preferred as a frequency reference. In this paper, a novel universal sD noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) instrumentation based on a fiber-coupled optical single-sideband electro-optic modulator (f-SSM) for the potential application in atmospheric lidar for different target gases with different types of lasers is reported. The f-SSM can replace all frequency actuators in the system, so as to eliminate the individual design of feedback servos that often are tailored for each laser. The universality of the instrumentation was demonstrated by the alternative use of either an Er-doped fiber laser or a whispering-gallery-mode laser. Then the instruments based on both lasers were used to produce the sD signals of acetylene, which worked as a frequency reference to stabilize the laser. By performing the lockings, relative frequency stabilizations of 8.3×10-13 and 7.5×10-13 at an integration time of 240 s were demonstrated.

A cavity-enhanced photoacoustic (CEPA) sensor was developed based on an ultra-narrow linewidth whispering-gallery-mode (WGM) diode laser. A cavity-enhanced photoacoustic module (CEPAM) was designed to match the output beam from the WGM-diode laser, resulting in an increase in the excitation light power, which, in turn, significantly enhanced the photoacoustic signal amplitude. The results show that a signal gain factor of 166 was achieved, which is in excellent agreement with the power enhancement factor of 175 after considering the power transmissivity. The performance of the sensor was evaluated in terms of the detection sensitivity and linearity. A 1σ detection limit of 0.45 ppmV for C2H2 detection was obtained at atmospheric pressure with a 1 s averaging time.

Meishan pigs tend to have higher disease resistance than commercial breeds, although more studies are needed to confirm this difference. This study compared intestinal barrier function between Meishan and crossbred neonatal piglets to provide guidance for both the breeding and nutritional regulation of pigs. Six Meishan piglets and 6 Duroc × (Landrace × Yorkshire) crossbred neonatal piglets (all with normal birth weights) were obtained and allocated into the MEIS and CROSS groups, respectively. Intestinal morphology, goblet cell numbers, antioxidant enzyme activity, and cytokine gene and tight junction protein expression were assessed. The results showed that BW was lower in the MEIS group than in the CROSS group (P

The marine oil spill is a sudden event, and the airborne hyperspectral means to detect the oil spill is an important part of the rapid response. Sun glint, the specular reflection of sun light from water surface to sensor, is inevitable due to the limitation of observation geometry, which makes so much bright glint in image that it is difficult to extract oil spill feature information from the remote sensing data. This paper takes AISA+ airborne hyperspectral oil spill image as data source, using multi-scale wavelet transform, enhanced Lee filter, enhanced Frost filter and mean filter method for sea surface glint suppression of images. And then the classical SVM method is used for the oil spill information detection, and oil spill information distribution map obtained by human-computer interactive interpretation is used to verify the accuracy of oil spill detection. The results show that the above methods can effectively suppress the sea surface glints and improve the accuracy of oil spill detection. The enhanced Lee filter method has the highest detection accuracy of 88.28 %, which is 12.2 % higher than that of the original image.

Based on the Landsat images in 2006, 2011 and 2015, and the method of dimidiate pixel model, the Normalized Difference Vegetation Index (NDVI) and the vegetation coverage, this paper analyzes the spatio-temporal variation of vegetation coverage in Changchun, China from 2006 to 2015, and investigates the response of vegetation coverage change to natural and artificial factors. The research results show that in nearly 10 years, the vegetation coverage in Changchun dropped remarkably, and reached the minimum in 2011. Moreover, the decrease of maximum NDVI was significant, with a decrease of about 27.43 %, from 2006 to 2015. The vegetation coverage change in different regions of the research area was significantly different. Among them, the vegetation change in Changchun showed a little drop, and it decreased firstly and then increased slowly in Yushu, Nong’an and Dehui. In addition, the temperature and precipitation change, land reclamation all affect the vegetation coverage. In short, the study of vegetation coverage change contributes scientific and technical support to government and environmental protection department, so as to promote the coordinated development of ecology and economy.

In this study, the internal flow pattern of a sessile microdroplet undergoing a lateral vibration was analyzed by using both the experimental and CFD simulation methods. By initially staining the droplet partially with fluorescent dye, the main flow inside the laterally vibrating microdrop was experimentally demonstrated to be that the main fluid flows downward along the central axis and ascends upward along the surface to form two counterflow circuits. Experimental evaluation of fluid mixing inside the droplets verified that the internal flowing velocity is dependent on the vibrating frequency, the main fluid flows faster at the resonant modes. CFD simulation using the VOF-CSF model showed that extra flow circuits exit inside the oscillating droplet besides the main flow. The diffusion of substrate momentum within the Stokes layer results in the two flow circuits near the bottom substrate, and the Laplace force due to the droplet deformation induces the two counter-current flow circuits near the surfaces of the microdroplet.

Sediment core ARC4-BN05 collected from the Canada Basin, Arctic Ocean, covers the late to middle Quaternary (Marine Isotope Stage – MIS – 1–15, ca. 0.5–0.6 Ma) as estimated by correlation to earlier proposed Arctic Ocean stratigraphies and AMS14C dating of the youngest sediments. Detailed examination of clay and bulk mineralogy along with grain size, content of Ca and Mn, and planktic foraminiferal numbers in core ARC4–BN05 provides important new information about sedimentary environments and provenance. We use increased contents of coarse debris as an indicator of glacier collapse events at the margins of the western Arctic Ocean, and identify the provenance of these events from mineralogical composition. Notably, peaks of dolomite debris, including large dropstones, track the Laurentide Ice Sheet (LIS) discharge events to the Arctic Ocean. Major LIS inputs occurred during the stratigraphic intervals estimated as MIS 3, intra-MIS 5 and 7 events, MIS 8, and MIS 10. Inputs from the East Siberian Ice Sheet (ESIS) are inferred from peaks of smectite, kaolinite, and chlorite associated with coarse sediment. Major ESIS sedimentary events occurred in the intervals estimated as MIS 4, MIS 6 and MIS 12. Differences in LIS vs. ESIS inputs can be explained by ice-sheet configurations at different sea levels, sediment delivery mechanisms (iceberg rafting, suspension plumes, and debris flows), and surface circulation. A long-term change in the pattern of sediment inputs, with an apparent step change near the estimated MIS 7–8 boundary (ca. 0.25 Ma), presumably indicates an overall glacial expansion at the western Arctic margins, especially in North America.

A distributed hydrological model has been successfully used in small-watershed flood forecasting, but there are still challenges for the application in a large watershed, one of them being the model's spatial resolution effect. To cope with this challenge, two efforts could be made; one is to improve the model's computation efficiency in a large watershed, the other is implementing the model on a high-performance supercomputer. This study sets up a physically based distributed hydrological model for flood forecasting of the Liujiang River basin in south China. Terrain data digital elevation model (DEM), soil and land use are downloaded from the website freely, and the model structure with a high resolution of 200 m × 200 m grid cell is set up. The initial model parameters are derived from the terrain property data, and then optimized by using the Particle Swarm Optimization (PSO) algorithm; the model is used to simulate 29 observed flood events. It has been found that by dividing the river channels into virtual channel sections and assuming the cross section shapes as trapezoid, the Liuxihe model largely increases computation efficiency while keeping good model performance, thus making it applicable in larger watersheds. This study also finds that parameter uncertainty exists for physically deriving model parameters, and parameter optimization could reduce this uncertainty, and is highly recommended. Computation time needed for running a distributed hydrological model increases exponentially at a power of 2, not linearly with the increasing of model spatial resolution, and the 200 m × 200 m model resolution is proposed for modeling the Liujiang River basin flood with the Liuxihe model in this study. To keep the model with an acceptable performance, minimum model spatial resolution is needed. The suggested threshold model spatial resolution for modeling the Liujiang River basin flood is a 500 m × 500 m grid cell, but the model spatial resolution with a 200 m × 200 m grid cell is recommended in this study to keep the model at a better performance.

The aim of this study was to evaluate the clinical and radiographic outcomes of upper thoracic (UT) versus lower thoracic (LT) upper instrumented vertebrae (UIV) for adult scoliosis by meta-analysis. We conducted a literature search in three databases to retrieve related studies up to March 15, 2017. The preliminary screened studies were assessed by two reviewers according to the selection criteria. All analyses were carried out using the statistical software package R version 2.31. Odds ratios (OR) with 95% confidence intervals (CI) were used to describe the results. The I2 statistic and Q statistic test were used for heterogeneity assessment. Egger's test was performed to detect publication bias. To assess the effect of each study on the overall pooled OR or standardized mean difference (SMD), sensitive analysis was conducted. Ten trials published between 2007 and 2015 were eligible and included in our study. Meta-analysis revealed that the UT group was associated with more blood loss (SMD=0.4779, 95%CI=0.3349-0.6209, Z=6.55, P

The interparcel mixing algorithm in the Lagrangian advection scheme with shape matrix (LASM) is updated to make the scheme more robust. The linear degeneration criterion is replaced by the maximum deviation of the skeleton points so that the new algorithm is more effective in controlling the shape of parcels, which is vital for long time simulation. LASM is inherently shape-preserving without any complicated filter or limiter, and it is linear. This fact contributes to the ability to preserve the sum of multiple tracers exactly on the parcels in LASM. A newly proposed terminator "toy"-chemistry test is used to test LASM, which shows that LASM can preserve the weighted sum of two reactive species precisely. The physics–dynamics coupling (i.e., tendency evaluation type) is also discussed. A flow generated by a WRF large-eddy simulation is also used to test the 3-D extension of LASM.

A new Lagrangian advection scheme with shape matrix (LASM) is proposed to take advantage of the extreme low numerical diffusion of the Lagrangian methods. The tracer is discretized into finite parcels, which move along the downstream trajectories. Different from other Lagrangian schemes, the parcel shape is simulated explicitly by a linear transformation matrix. By doing so, the aliasing error in the Lagrangian schemes is largely reduced without introducing substantial interparcel mixing in the pure advection stage, because the flow information will be respected when remapping tracer density onto the fixed model grids. An adaptive interparcel mixing algorithm is constructed to ensure the validity of the linear approximation of the parcel shape, where the mixing is only triggered when it is necessary and resembles the physical mixing. The total tracer mass on the parcels is conserved exactly. The new scheme is validated by using several test cases.

In this paper, a new compound c-Fe16N2 is obtained using a new crystal structure prediction software CALYPSO (Crystal Structure Analysis by Particle Swarm Optimization). The compound has a structure of C2/m (the twelfth space group), and a magnetic moment of 17 µB per unit cell. The enthalpy of c-Fe16N2 is - 8.620 eV/atom, which is little to that of α''-Fe16N2 (-8.287 eV/atom), so the former is more stable from the view of energy. The average magnetic moment of c-Fe16N2 is 2.13 µB per iron atom which is small to that of α''- Fe16N2 (2.8 µB). The c-Fe16N2 is a new rare earth-free permanent magnet. No rare earth means no environmental pollution in the the rare earth mining. The α''-Fe16N2 has a highest saturation magnetic flux density, but it is difficult to mass production, because there are other several N-Fe iron compounds (such as Fe3N, Fe4N) in the obtained resultants. The newly found compound c-Fe16N2 may replace α''-Fe16N2 because the former can be easily obtained compared to the latter, and there maybe a new way to mass production of α''-Fe16N2 from c-Fe16N2.

We have designed an orthogonal curvilinear terrain-following coordinate (the orthogonal σ coordinate, or the OS coordinate) to reduce the advection errors in the classic σ coordinate. First, we rotate the basis vectors of the z coordinate in a specific way in order to obtain the orthogonal, terrain-following basis vectors of the OS coordinate, and then add a rotation parameter b to each rotation angle to create the smoother vertical levels of the OS coordinate with increasing height. Second, we solve the corresponding definition of each OS coordinate through its basis vectors; and then solve the 3-D coordinate surfaces of the OS coordinate numerically, therefore the computational grids created by the OS coordinate are not exactly orthogonal and its orthogonality is dependent on the accuracy of a numerical method. Third, through choosing a proper b, we can significantly smooth the vertical levels of the OS coordinate over a steep terrain, and, more importantly, we can create the orthogonal, terrain-following computational grids in the vertical through the orthogonal basis vectors of the OS coordinate, which can reduce the advection errors better than the corresponding hybrid σ coordinate. However, the convergence of the grid lines in the OS coordinate over orography restricts the time step and increases the numerical errors. We demonstrate the advantages and the drawbacks of the OS coordinate relative to the hybrid σ coordinate using two sets of 2-D linear advection experiments.

China is facing a water resources crisis with growing concerns as to the reliable supply of water for agricultural, industrial and domestic needs. High inter-annual rainfall variability and increasing consumptive use across the country exacerbates the situation further and is a constraint on future development. For water sustainability, it is necessary to examine the differences in water demand and supply and their spatio-temporal distribution in order to quantify the dimensions of the water risk. Here, a detailed quantitative assessment of water risk as measured by the spatial distribution of cumulated deficits for China is presented. Considering daily precipitation and temperature variability over fifty years and the current water demands, risk measures are developed to inform county level water deficits that account for both within-year and across-year variations in climate. We choose political rather than watershed boundaries since economic activity and water use are organized by county and the political process is best informed through that unit. As expected, the risk measures highlight North China Plain counties as highly water stressed. Regions with high water stress have high inter-annual variability in rainfall and now have depleted groundwater aquifers. The stress components due to agricultural, industrial and domestic water demands are illustrated separately to assess the vulnerability of particular sectors within the country to provide a basis for targeted policy analysis for reducing water stress.

Recently, a standard test case suite for 2-D linear transport on the sphere was proposed to assess important aspects of accuracy in geophysical fluid dynamics with a "minimal" set of idealized model configurations/runs/diagnostics. Here we present results from 19 state-of-the-art transport scheme formulations based on finite-difference/finite-volume methods as well as emerging (in the context of atmospheric/oceanographic sciences) Galerkin methods. Discretization grids range from traditional regular latitude–longitude grids to more isotropic domain discretizations such as icosahedral and cubed-sphere tessellations of the sphere. The schemes are evaluated using a wide range of diagnostics in idealized flow environments. Accuracy is assessed in single- and two-tracer configurations using conventional error norms as well as novel diagnostics designed for climate and climate–chemistry applications. In addition, algorithmic considerations that may be important for computational efficiency are reported on. The latter is inevitably computing platform dependent. The ensemble of results from a wide variety of schemes presented here helps shed light on the ability of the test case suite diagnostics and flow settings to discriminate between algorithms and provide insights into accuracy in the context of global atmospheric/ocean modeling. A library of benchmark results is provided to facilitate scheme intercomparison and model development. Simple software and data sets are made available to facilitate the process of model evaluation and scheme intercomparison.

A process-based fire regime model (SPITFIRE) has been developed, coupled with ecosystem dynamics in the LPJ Dynamic Global Vegetation Model, and used to explore fire regimes and the current impact of fire on the terrestrial carbon cycle and associated emissions of trace atmospheric constituents. The model estimates an average release of 2.24 Pg C yr−1 as CO2 from biomass burning during the 1980s and 1990s. Comparison with observed active fire counts shows that the model reproduces where fire occurs and can mimic broad geographic patterns in the peak fire season, although the predicted peak is 1–2 months late in some regions. Modelled fire season length is generally overestimated by about one month, but shows a realistic pattern of differences among biomes. Comparisons with remotely sensed burnt-area products indicate that the model reproduces broad geographic patterns of annual fractional burnt area over most regions, including the boreal forest, although interannual variability in the boreal zone is underestimated.

In this paper, a Fibre Bragg Grating (FBG) is used to monitor the early age curing temperature of cement paste. The FBG is inscribed by a Continuous Wave (CW) 244nm argon ion laser in the photosensitive fibre. The fabricated FBG is calibrated from room temperature to 105ºC. In this temperature range, the FBG is found to be in good conditions in both the sensitivity and linearity, which are around 9pm/ºC and 99.9%, respectively. In the experiment, the GP Portland cement, sand and water were mixed by volume of 800, 500, and 275 ml, respectively, as the host specimen. The results of the experiment prove that the FBG can determine the setting time of the specimen at the curing time of 5h.

No abstract available.

Despite antiretroviral therapy, HIV often persists in tissue sanctuary sites. In this work, authors investigate HIV persistence and T cell responses in lymph node biopsies obtained from individuals who initiated antiretroviral therapy in Fiebig stage I and beyond.

HIV variants present in the reservoir, particularly in tissues, may differ from those present in peripheral blood prior to therapy initiation, and characterisation of these reservoir variants could better inform immune-based interventions for HIV cure. In the present study, Gag sequence differences between variants derived from the lymph node and peripheral blood mononuclear cell (PBMC) reservoirs as well as those derived from pre-therapy plasma, were investigated in 24 HIV-1 subtype C-infected individuals. HIV gag amplification was successful for 20 individuals, where 4 were controls including one untreated individual and 3 early treated individuals with LN collection within 2 weeks of treatment initiation. The remaining 16 individuals with LN and PBMC collection > 3 months after treatment initiation (median = 665 days), were further characterised. Recombinant viruses encoding patient-derived Gag-protease sequences from the pre-therapy plasma, LN reservoir, and PBMC reservoir, were constructed and the replication-competent viruses that grew in vitro were used to further investigate whether there are specific features of Gag reservoir variants that may have relevance for strategies to cure HIV. Virus characteristics measured included replication capacity, interferon-alpha resistance, cell-to-cell spread ability, and induction of antiviral cytokines. A limited number of novel Gag mutations (median = 4) in the reservoir of 3/7 early treated participants and 9/9 late treated participants were observed, where the majority of these mutations were likely cytotoxic T lymphocyte (CTL)-driven and 48% were represented in the replication-competent viruses. The reservoir variants had very few unique potential CTL escape mutations (median = 3) in Gag compared to the number of these Gag mutations that were already present in the plasma-derived virus (median = 23) at the time of treatment initiation, which was similar whether treatment was initiated late or early. The data suggest that the extent of CTL escape in Gag overall is likely similar between early and late treated individuals as well as between the reservoir and pre-therapy variants. The sequence differences in Gag that were unique to the reservoir viruses did not result in significantly altered virus characteristics overall, and are therefore unlikely to affect effectiveness of immune-based interventions for virus eradication.

Solution reflux and edema hamper the convection-enhanced delivery of the standard treatment for glioma. Therefore, a real-time magnetic resonance imaging (MRI) method was developed to monitor the dosing process, but a quantitative analysis of local diffusion and clearance parameters has not been assessed. The objective of this study was to compare diffusion into the extracellular space (ECS) at different stages of rat C6 gliomas, and analyze the effects of the extracellular matrix (ECM) on the diffusion process. At 10 and 20 days, after successful glioma modeling, gadolinium-diethylenetriamine pentaacetic acid (Gd-DTPA) was introduced into the ECS of rat C6 gliomas. Diffusion parameters and half-life of the reagent were then detected using MRI, and quantified according to the mathematical model of diffusion. The main ECM components [chondroitin sulfate proteoglycans (CSPGs), collagen IV, and tenascin C] were detected by immunohistochemical and immunoblot analyses. In 20-day gliomas, Gd-DTPA diffused more slowly and derived higher tortuosity, with lower clearance rate and longer half-life compared to 10-day gliomas. The increased glioma ECM was associated with different diffusion and clearance parameters in 20-day rat gliomas compared to 10-day gliomas. ECS parameters were altered with C6 glioma progression from increased ECM content. Our study might help better understand the glioma microenvironment and provide benefits for interstitial drug delivery to treat brain gliomas.

The capillary wave and initial spreading velocity in the spreading phase of drop impacting on a glass surface are studied experimentally, while the drop photos are obtained by using a high-speed video camera, which can catch up to 9000 images per second with an exposure time of 4 µs. A wide range of impact velocities are studied by varying the fall height, showing different capillary waves. All attention is given to the capillary wave and initial spreading velocity of drop. A non-linear relation between the wavelength and the impact velocity is found experimentally. Combined with the minimum spreading radius theory, a linear relation between the initial spreading velocity and the impact velocity is acquired.

Abstract In this paper we study the bounded perturbation resilience of the extragradient and the subgradient extragradient methods for solving a variational inequality (VI) problem in real Hilbert spaces. This is an important property of algorithms which guarantees the convergence of the scheme under summable errors, meaning that an inexact version of the methods can also be considered. Moreover, once an algorithm is proved to be bounded perturbation resilience, superiorization can be used, and this allows flexibility in choosing the bounded perturbations in order to obtain a superior solution, as well explained in the paper. We also discuss some inertial extragradient methods. Under mild and standard assumptions of monotonicity and Lipschitz continuity of the VI’s associated mapping, convergence of the perturbed extragradient and subgradient extragradient methods is proved. In addition we show that the perturbed algorithms converge at the rate of O ( 1 / t ) $O(1/t)$ . Numerical illustrations are given to demonstrate the performances of the algorithms.