Search

The Geological and Geomorphological study in Upper Ganga basin has been attempted in parts of de Uttarkashi,Chamoli, Pauri and Tehri districts an area of 10000 Sq.kms in parts of QA sheet 53Jand 53 N on1:50000 scale of Garhwal Himalaya U.P presently known as Uttrakhand State of Union of India. Out of total area of study, an area about 3500 sq.Kms has been selected for detailed Geological, Geomorphological and Sedimentological study. The area of Upper Ganga basin consisting ofAlaknanda,Bhagirathi,Bhilangna, Nandakini, Mandakini, Pindar, Dhauli- Ganga Bal- Ganga , Madhmeshwar Ganga and Berhi Ganga The Alaknanda is chracterised by six terraces followed by Bhagirathi with five terraces , Bhilangna Nandakini four terraces Mandakini /Pindar/Dhauli-Ganga /Balganga three terraces , Madhmshwar Ganga two terracesand Bberhi Ganga one terrace,amidst theseAlaknanda is trunk stream and others are tributaries. Geomorphologically the area is divided in to seven geomorphicunitsviz High relief formerly glaciated area, Structural hills, Denudational hills, Area of mass wasting, High level dissected fans, river Terraces and Present day flood plain of Alaknanda and its tributaries . These units area developed in response to lithology to erosional land depositional activities and tectonic in which they are embedded. Each unit is characterized by drainage, diagnostic geomorphic landform elements and features, photo charcters and morphogenetic expression. The other geomorphic features and elements identified in the area are point bar, channel bar, alluvial fans ,talus cone , rock cut terracesfan cut terraces , abandoned channel ,epigenetic gorges, strand lines landslides ,rock fall scree and scree slope, retreating scarp, abandoned cirque, arêtes, threshold, horn peak and glacial lake. The area genetically comprised of terraces of three domains, viz. Glacial, Fluvio-glacia and Fluvial which represent distinct environment of sedimentation of Pleistocene, late Pleistocene and Holocene time during Quaternary period. The Glacial terraces are identified at an average elevation of 1150 m above MSL, the fluvio-glacial terraces at an average elevation of 975m above MSL and Fluvial terraces at an average elevation between 650 to 900 m above MSL. &nbsp

A review of earlier studies of the Deccan Trap occurrences of parts of Ratlam, Mandsaur, Jhabua, Dhar, Khargone, Indore, Ujjain and Shajapur districts of Madhya Pradesh, India was carried out of the area falling between latitudes 2200000 to 2400000N and longitudes 7400000 to 7600000 in Survey of India Quadrangle sheet Nos. 46I, 46J, 46M and 46N.The main objectives of the study were to synthesize the data on the Deccan Trapbasaltic lava flows , their types ,their diagnostic characteristics with special emphasis on delineating and identifying the various megacryst horizons , their levels with specific elevation above m.s.l. to build up the litho-stratigraphy for regional correlation. Broadly the area exhibits the Proterozoic Aravalli Supergroup, the Cretaceous, Bagh and Lameta Groups and the Deccan basaltic lava flows with intruded dykes and sills. The Aravalli Supergroup is represented by the Udaipur, Lunavada and Champaner Groups. The Udaipur Group consists mainly of hornblende gneiss, marble and calc-silicate, carbonaceous phyllites and chlorite schist. The Lunavada Group comprises dolomitic limestone (Phosphate bearing), quartzite, muscovite quartzite, quartz muscovite schist, feldspathised quartzite, gneissic feldspathic rock and biotitic gneiss. The Champaner Group is represented by dolomite, phyllite, slates and basic intrusives. The Aravalli Super group of rocks is also intruded by serpentinite, pyroxinite, granite and basic rocks. The Aravalli Supergroup of rocks is unconformably overlain by Cretaceous marine sedimentary deposits of Bagh Group. It includes Lower arenaceous and Upper calcareous units and occurs as discontinuous outcrops. These are almost horizontally to sub horizontally disposed. The Bagh Group is represented by three units / Formations i.e. Nimar sandstone overlain by nodular limestone and subsequently by coralline limestone. The Lameta Group of rocks is noticed in the area east and South East of Bagh exposures, overlying the Nimar sandstones. These rocks predominantly consist of limestone, gritty sandstone and conglomerate and generally exhibit hummocky topography and sometimes display solution channels. These are mostly horizontally to sub-horizontally disposed with an average thickness of 5- 6 m. The Deccan Trap has occupied a very long stretch of area which consists of a sequence of 121 basaltic lava flows with a cumulative thickness of about 610 m. These flows represent a sequence of cyclic lava eruptions with fine to medium grained a aphyric to sparsely / moderately / highly / mega porphyritic lava. About two third of the total flows exhibit Aa characters and the rest are compound and simple Pahoehoe. Some of these flows consist of megacryst units containing feldspar laths varying in size round two to five cm. These megacryst horizons have been identified at different elevations in Quadrangles 46I, J, M, N and on the basis of these horizons, various flows have been grouped into to six Formations which have specific nomenclatures and stratigraphic status. These formations are in the order of antiquity 1) Mandleshwar formation, 2) Choral formation,3) Dhar formations 4) Indore Formation 5) Bargonda Formation and 6) Singarchori Formation. Full sequence is exposed only in quadrangle 46N whereas the Quadrangles 46I, J, M do not exhibit Bargonda and Singarchori Formations. An attempt has been made to correlate the various Formations in degree sheets 46 I, J, M, N with the surroundings Geological Quadrangles. The Megacryst bearing lava- flows act as marker horizons for this purpose. A large number of dykes and dyke swamps of basaltic as well as doleritic compositions have been marked around the Narmada River. The intensity of the dykes is more in the oldest Mandleshwar Formations and it gradually decreases in increasing order of antiquity towards the younger Bargonda and Singarchori Formations. The general trend of these dykes varies from East North East – West South West to E-W running sub parallel to the Narmada lineament, besides a few dykes also cut across this lineament trend and oriented along NNW-SSE to N-S direction. The Length of these dykes varies from about 200 m to 20 Km with width varying from a few meters to as much as 200 m. The possibility exists that these dykes may have been actually feeders through which periodic eruptions of tholiitic basaltic lava took place resulting in formation of such a thick pile of lava flows. Besides as many as seven Intertrapean fossiliferous sedimentary horizons have been recognized within the basal part of the flows. These demonstrate episodic nature of volcanic activity, long periods of quiescence and resilience. The overall study of various lava flow s and their interrelations their relative dispositions thinning /swelling and pinching nature. Their relative elevations, occurrence of marker megacryst units, change in lava characters, overall gradient of lava flows and their relation to preexisting topography and slope elements reveals that the sources of lava eruptions of Older Formations are situated somewhere in the west and south west whereas those of Younger Formations are located in the Eastern part of Mhow of the area studied. &nbsp

In this work, a new chlorophyll dye-sensitiser derived from mitragyna speciosa (MS) leaves, also known as Kratom, was employed for dye-sensitised solar cells (DSSCs). The influence of magnesium sulfate (MgSO

Magnaporthe oryzae Triticum causing blast a devastating disease of wheat. An attempt was taken to study the morphological, pathological and cultural characteristics of M. oryzae Triticum and its in-vitro fungicidal control. Four isolates were isolated from infected wheat inflorescence. Conidia of the isolates were solitary, pyriform to obclavate, pale brown, smooth, granular to guttulate, 2-septate; hilum truncate, protruding and not darkened. Isolates were positive in pathogenicity test on wheat and caused characteristic eye shape lesions on leaves. The wheat blast isolates did not produce any blast symptom in rice. M. oryzae Triticum showed consistently better mycelial growth at pH 5.5, 29°C and in Oat Meal Agar medium. Efficacy of six fungicides such as Autostin 50WGD, Nativo 75WG, Diathane M 45, Khowin 50WP, Ridomil Gold MZ 68WG and Provax 200WP at concentrations of 50 ppm, 100 ppm and 150 ppm was evaluated against M. oryzae Triticumin in-vitro. Autostin 50WGD, Nativo 75WG and Knowin 50WP inhibited the growth of M. oryzae Triticum completely at all three concentrations. Therefore, these three fungicides may be suggested to control blast disease of wheat.

This research study explores the effects of entropy generations on the pulsatile blood flow through a w-shape curved stenosed channel. The mathematical formulations of this physical problem are derived from the couple equations of momentum and energy. These equations are first normalized, and then solved numerically using the explicit finite difference technique. Subsequently, the solutions of these equations are utilized in the calculation of the Bejan number (Be) and entropy generations (NG). To simplify this problem, a few assumptions are taken into consideration; for instance, a mild stenotic condition is assumed in order to reduce the order of differential equations. The results are based on various velocity graphs sketched under the influence of the curvature (Rc) and magnetic (M) parameters. The magnitude of velocity as well as streamline profiles are highly affected due to the curvature effects of channel wall. The results demonstrate that the value of Bejan (Be) number is highly influenced by increasing the value of curvature parameter (Rc) as depicted in the graphs. Similarly, the shape of velocity profile reduces to symmetric in the unbent vessel. Moreover, it is also observed that the magnitude of velocity has decelerated in the presence of magnetic field.

For ambient radio-frequency (RF) energy harvesting, the available power levels are quite low, and it is highly desirable that the rectifying diodes do not consume any power at all. Contrary to semiconducting diodes, a tunnelling diode – also known as a metal-insulator-metal (MIM) diode – can provide zero-bias rectification, provided the two metals have different work functions. This could result in a complete passive rectenna system. Despite great potential, MIM diodes have not been investigated much in the GHz-frequency regime due to challenging nano-fabrication requirements. In this work, we investigate zero-bias MIM diodes for RF energy-harvesting applications. We studied the surface roughness issue for the bottom metal of the MIM diode for various deposition techniques such as sputtering, atomic layer deposition (ALD) and electron-beam (e-beam) evaporation for crystalline metals as well as for an amorphous alloy, namely ZrCuAlNi. A surface roughness of sub-1 nm has been achieved for both the crystalline metals as well as the amorphous alloy, which is vital for the reliable operation of the MIM diode. An MIM diode comprising of a Ti-ZnO-Pt combination yields a zero-bias responsivity of 0.25 V− 1 and a dynamic resistance of 1200 Ω. Complete RF characterisation has been performed by integrating the MIM diode with a coplanar waveguide transmission line. The input impedance varies from 100 Ω to 50 Ω in the frequency range of between 2 GHz and 10 GHz, which can be easily matched to typical antenna impedances in this frequency range. Finally, a rectified DC voltage of 4.7 mV is obtained for an incoming RF power of 0.4 W at zero bias. These preliminary results of zero-bias rectification indicate that complete, passive rectennas (a rectifier and antenna combination) are feasible with further optimisation of MIM devices.

This paper reports the synthesis of polypyrrole–titanium(IV)phosphate (PPy–TiP) nanocomposite as a synthetic adsorbent for the adsorptive removal of Cr(VI) ions from aqueous solutions. Facile in situ chemical oxidative polymerization of pyrrole in presence of titanium(IV)phosphate (TiP) formed PPy–TiP nanocomposite. The prepared PPy–TiP nanocomposite was characterized by FT-IR, FE-SEM, TEM, EDAX and BET analysis. A strong interaction between PPy and TiP particles was observed, and the nanocomposite showed remarkable adsorption of Cr(VI) ions from aqueous solutions. In order to optimize the conditions for maximum adsorption of Cr(VI) ions, batch process was used and the effects of contact time, initial concentration, pH, point of zero charge measurement and adsorbent doses were investigated. The equilibrium isotherm data were fitted using Langmuir and Freundlich isotherms. The adsorption process based on the thermodynamic parameters was spontaneous and endothermic. Dubinin–Radushkevich (D–R) isotherm was used to calculate the mean free energy, which showed that the adsorption process involves chemical forces, hence chemical in nature. The kinetics data were evaluated using the pseudo-first-order and pseudo-second order kinetics model, and it was found that data was best fitted by the pseudo-second-order model for adsorption of Cr(VI) supporting that the adsorption mainly consisted of chemisorption. The desorption studies were also performed by batch process and ∼100% desorption of Cr(VI) ions was achieved using 0.5 M NaOH solution as eluent.

Introduction With the number of people with sight loss predicted to double to four million people in the UK by the year 2050, preventable visual loss is a significant public health issue. Sight loss is associated with an increased risk of falls, accidents and depression and evidence suggests that 50% of sight loss can be avoided. Timely diagnosis is central to the prevention of sight loss. Access to care can be a limiting factor in preventable cases. By improving referrals and access to hospital eye services it is possible to treat and minimise the number of patients with preventable sight loss and the impact this has on wider society. Clinical pilot study In 2005, NHS Fife took part in a flagship pilot funded by the Scottish government e-health department to evaluate the feasibility, safety, clinical effectiveness, and cost of electronic referral with images of patients directly from community optometrists to Hospital Eye Service (HES). The pilot study showed that electronic referral was feasible, fast, safe, and obviated the need for outpatient appointments in 128 (37%) patients with a high patient satisfaction. Centralised ophthalmic electronic referral unit The results of the pilot study were presented and in May 2007, the electronic referral system was rolled out regionally in southeast Scotland. Referrals were accepted at a single site with vetting by a trained team and appointments were allocated within 48 hours. Following the implementation of electronic referral, waiting times were reduced from a median of 14 to 4 weeks. Significantly fewer new patients were seen (7462 vs 8714 [ p vs 2671 [ p vs 635 [ p Eye care integration project (Scotland) In 2010 the Scottish Government Health Department committed £6.6 million to community and hospital ophthalmic services forming the Eyecare Integration Project in 2011. The main aim of this project was to create electronic communication between community optometry practices and hospital eye departments. Five electronic forms were specifically designed for cataract, glaucoma, macula, paediatric and general ophthalmic disease. A Virtual Private Network was created which enabled optometrists to connect to the Scottish clinical information gateway system and send referrals to hospital and receive referral status feedback. Numerous hurdles have been encountered and overcome in order to deliver this project. Discussion An efficient unique system has been described within the NHS whereby the provision of eye care has been modernised by creating a user-friendly electronic interface between the community and HES. This system ensures patients are vetted into the correct specialist clinic and thus will be less likely to go blind from treatable conditions. Urgent conditions will continue to be prioritised and savings made with efficiencies gained can be re-invested towards better overall patient care.

Twenty five spring wheat genotypes were evaluated for terminal heat stress tolerance in field environments in the Agro Ecological Zone-11 of Bangladesh, during 2009-2010 cropping season. The experiments were conducted at Wheat Research Centre, Bangladesh Agricultural Research Institute, using randomized block design with three replicates under non-stress (optimum sowing) and stress (late sowing) conditions. Seven selection indices for stress tolerance including mean productivity (MP), geometric mean productivity (GMP), tolerance (TOL), yield index (YI), yield stability index (YSI), stress tolerance index (STI) and stress susceptibility index (SSI) were calculated based on grain yield of wheat under optimum and late sowing conditions. The results revealed significant variations due to genotypes for all characters in two sowing conditions. Principal component analysis revealed that the first PCA explained 0.64 of the variation with MP, GMP, YI and STI. Using MP, GMP, YI and STI, the genotypes G-05 and G-22 were found to be the best genotypes with relatively high yield and suitable for both optimum and late heat stressed conditions. The indices SSI, YSI and TOL could be useful parameters in discriminating the tolerant genotypes (G-12, G-13, and G-14) that might be recommended for heat stressed conditions. It is also concluded from the present studies that biomass, grain filling rate and spikes number m-2 are suitable for selecting the best genotypes under optimum and late sowing conditions because these parameters are highly correlated with MP, GMP, YI and STI. However, high ground cover with long pre heading stage and having high grain filling rate would made a genotype tolerant to late heat to attain a high grain yield in wheat.

Liver cirrhosis is one of the major causes of morbidity and mortality worldwide. Liver transplantation is the only successful and curative option for the management of this disease. However, cost effectiveness, timely availability, operative risks, need of life-long immunosuppressant, and shortage of donor organs are major challenges to fulfill the demand. Stem cells transplantation has emerged as a bridge to liver transplantation for the repopulation of cirrhotic liver due to its potential for long-term proliferation. Human fetal liver–derived stem/progenitor cells (fLSPCs) are emerging as safe and effective therapeutic possibility in the management of liver cirrhosis due to their low immunogenicity and high proliferative ability. Combination of mesenchymal stem cells with fLSPCs could be the best option to ameliorate immunomodulation, fibrotic reconstruction, and repopulation of lost hepatocytes to replenish the deficient liver functions. Merging of nanotechnology and whole-liver bioengineering approaches could provide several unanswered questions of regenerative mechanisms and developing extracorporeal liver systems.

The flow regimes bubble flow, pulse flow, and spray flow were identified by visual observation in a packed column. Three gas-liquid systems (air/water, air/56 % glycerol, and air/monoethanolamine) and four column packings (Raschig rings, Intalox saddles, and two sizes of spheres) were investigated to cover wide ranges of physical properties of gas liquid systems and characteristics of column packings affecting the flow regime transition. Criteria for the flow regime transition were developed in terms of system and operating variables.

The recycled polyethylene terephthalate (PET) plastic waste was depolymerized through glycolysis to produce unsaturated polyester resin (UPER). The UPER so produced was then used as a binding agent to produce polymer mortar (PM) and polymer concrete (PC). Eight different sets of PM and PC were produced by varying PET to glycol ratio, dibasic acids and initiator promoter combinations. The PET to glycol ratio used in the present study was 1:1 and 2:1. The initiator promoter combinations taken were Methyl ethyl ketone peroxide (MEKP) and cobalt naphthanate (CoNp) in one group of sets while Benzoil peroxide (BPO) and N, N-diethyl aniline (NNDA) in other group of sets. For each set, microscopic studies were conducted on neat resin and polymer mortar. The cube compressive strength of PM and PC so produced was found to vary from 15 to 28 MPa and from 20 to 42 MPa, respectively. The tensile strength of polymer concrete was either at par or more than the tensile strength of equivalent grade of cement concrete. The results of different sets have been compared and sets showing better performance have been identified.

Zinc hexacyanoferrate nanocubes have been synthesized following an extremely simple method and characterized by elemental analysis, thermal analysis, infrared spectroscopic and X-ray diffraction techniques. Field emission scanning electron microscopic image showed that it consisted of sharp cubic particles with size ranging from 83 to 164 nm. Catalytic activity of nanocubic zinc hexacyanoferrate has been studied for solvent-free oxidation of benzyl alcohol using H 2 O 2 as oxidant under the optimum conditions of certain parameters such as benzyl alcohol to H 2 O 2 molar ratio, the amount of catalyst, reaction time and temperature.

In this study, post consumer polyethylene terephthalate (PET) waste bottles were used, to produce unsaturated polyester resin by depolymerization through glycolysis reaction with diethylene glycol. The glycolysis was optimized by varying temperature, amount of catalyst, and the glycolysis time. The glycolysis product bis-2-hydroxy ethylene terephthalate (BHET) monomers were converted into unsaturated polyesters, which were diluted with styrene to produce the unsaturated polyester resin. These resins were used to produce polymer mortar and cured using benzoyl peroxide as an initiator and N , N -diethyl aniline as promoter. These polymer mortar composites were analyzed for physiochemical properties using carbon, hydrogen and nitrogen (CHN) elemental analysis, Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis–differential thermal analysis (TGA–DTA). The polymer mortar so produced has a compressive strength of about 10 MPa and may be used in applications such as pavements, median barriers, sewer pipes, etc. Its tensile strength at 45 days of age is 18–23% of its compressive strength at the same age.

Organic-inorganic hybrid materials enable the integration of useful organic and inorganic characteristics within a single molecular-scale composite. Unique ion-exchange properties of these types of materials have been observed, and many others can be envisioned for this promising class of materials. In this paper, we describe the ion-exchange and physico-chemical properties of one family of self-assembling organic-inorganic hybrid based on nylon-6,6, framework with Zr(IV) phosphate an inorganic ion-exchanger. The physico-chemical properties of this hybrid material were determined using atomic absorption spectrophotometry (AAS), CHN elemental analysis, ICP-MS, UV-vis spectrophotometry, FTIR, TGA-DTA and scanning electron microscope (SEM) studies. Ion-exchange capacity (IEC), thermal stability and distribution behavior, etc. were also carried out to understand the cation-exchange behavior of the material. On the basis of distribution studies, the material was found to be highly selective for Hg(II), a highly toxic environmental pollutant. Its selectivity was examined by achieving some important binary separations like Hg(II)-Mg(II), Hg(II)-Zn(II), Hg(II)-Fe(III), Hg(II)-Bi(III), etc. Thus, the relatively new field of "organic-inorganic" hybrids offers a variety of exciting technological opportunities to decrease the environmental pollution.