Search

Repair success for injuries to the flexor tendon in the hand is often limited by the in vivo behaviour of the suture used for repair. Common problems associated with the choice of suture material include increased risk of infection, foreign body reactions, and inappropriate mechanical responses, particularly decreases in mechanical properties over time. Improved suture materials are therefore needed. As high-performance materials with excellent tensile strength, spider silk fibres are an extremely promising candidate for use in surgical sutures. However, the mechanical behaviour of sutures comprised of individual silk fibres braided together has not been thoroughly investigated. In the present study, we characterise the maximum tensile strength, stress, strain, elastic modulus, and fatigue response of silk sutures produced using different braiding methods to investigate the influence of braiding on the tensile properties of the sutures. The mechanical properties of conventional surgical sutures are also characterised to assess whether silk offers any advantages over conventional suture materials. The results demonstrate that braiding single spider silk fibres together produces strong sutures with excellent fatigue behaviour; the braided silk sutures exhibited tensile strengths comparable to those of conventional sutures and no loss of strength over 1000 fatigue cycles. In addition, the braiding technique had a significant influence on the tensile properties of the braided silk sutures. These results suggest that braided spider silk could be suitable for use as sutures in flexor tendon repair, providing similar tensile behaviour and improved fatigue properties compared with conventional suture materials.

BACKGROUND: Surgical reapposition of peripheral nerve results in some axonal regeneration and functional recovery, but the clinical outcome in long distance nerve defects is disappointing and research continues to utilize further interventional approaches to optimize functional recovery. We describe the use of nerve constructs consisting of decellularized vein grafts filled with spider silk fibers as a guiding material to bridge a 6.0 cm tibial nerve defect in adult sheep. METHODOLOGY/PRINCIPAL FINDINGS: The nerve constructs were compared to autologous nerve grafts. Regeneration was evaluated for clinical, electrophysiological and histological outcome. Electrophysiological recordings were obtained at 6 months and 10 months post surgery in each group. Ten months later, the nerves were removed and prepared for immunostaining, electrophysiological and electron microscopy. Immunostaining for sodium channel (NaV 1.6) was used to define nodes of Ranvier on regenerated axons in combination with anti-S100 and neurofilament. Anti-S100 was used to identify Schwann cells. Axons regenerated through the constructs and were myelinated indicating migration of Schwann cells into the constructs. Nodes of Ranvier between myelin segments were observed and identified by intense sodium channel (NaV 1.6) staining on the regenerated axons. There was no significant difference in electrophysiological results between control autologous experimental and construct implantation indicating that our construct are an effective alternative to autologous nerve transplantation. CONCLUSIONS/SIGNIFICANCE: This study demonstrates that spider silk enhances Schwann cell migration, axonal regrowth and remyelination including electrophysiological recovery in a long-distance peripheral nerve gap model resulting in functional recovery. This improvement in nerve regeneration could have significant clinical implications for reconstructive nerve surgery.

BACKGROUND: In the field of Plastic Reconstructive Surgery the development of new innovative matrices for skin repair is in urgent need. The ideal biomaterial should promote attachment, proliferation and growth of cells. Additionally, it should degrade in an appropriate time period without releasing harmful substances, but not exert a pathological immune response. Spider dragline silk from Nephila spp meets these demands to a large extent. METHODOLOGY/PRINCIPAL FINDINGS: Native spider dragline silk, harvested directly out of Nephila spp spiders, was woven on steel frames. Constructs were sterilized and seeded with fibroblasts. After two weeks of cultivating single fibroblasts, keratinocytes were added to generate a bilayered skin model, consisting of dermis and epidermis equivalents. For the next three weeks, constructs in co-culture were lifted on an originally designed setup for air/liquid interface cultivation. After the culturing period, constructs were embedded in paraffin with an especially developed program for spidersilk to avoid supercontraction. Paraffin cross-sections were stained in Haematoxylin & Eosin (H&E) for microscopic analyses. CONCLUSION/SIGNIFICANCE: Native spider dragline silk woven on steel frames provides a suitable matrix for 3 dimensional skin cell culturing. Both fibroblasts and keratinocytes cell lines adhere to the spider silk fibres and proliferate. Guided by the spider silk fibres, they sprout into the meshes and reach confluence in at most one week. A well-balanced, bilayered cocultivation in two continuously separated strata can be achieved by serum reduction, changing the medium conditions and the cultivation period at the air/liquid interphase. Therefore spider silk appears to be a promising biomaterial for the enhancement of skin regeneration.

BACKGROUND: Several materials have been used for tissue engineering purposes, since the ideal matrix depends on the desired tissue. Silk biomaterials have come to focus due to their great mechanical properties. As untreated silkworm silk has been found to be quite immunogenic, an alternative could be spider silk. Not only does it own unique mechanical properties, its biocompatibility has been shown already in vivo. In our study, we used native spider dragline silk which is known as the strongest fibre in nature. METHODOLOGY/PRINCIPAL FINDINGS: Steel frames were originally designed and manufactured and woven with spider silk, harvesting dragline silk directly out of the animal. After sterilization, scaffolds were seeded with fibroblasts to analyse cell proliferation and adhesion. Analysis of cell morphology and actin filament alignment clearly revealed adherence. Proliferation was measured by cell count as well as determination of relative fluorescence each after 1, 2, 3, and 5 days. Cell counts for native spider silk were also compared with those for trypsin-digested spider silk. Spider silk specimens displayed less proliferation than collagen- and fibronectin-coated cover slips, enzymatic treatment reduced adhesion and proliferation rates tendentially though not significantly. Nevertheless, proliferation could be proven with high significance (p

Shunt active filters are a means to improve power quality in distribution networks. Typically, they are connected in parallel to disturbing loads in order to reduce the injection of non sinusoidal load currents into the utility grid. The high power active filter investigated in this paper is based on a pulse-width modulation (PWM) controlled voltage source inverter. Its inner current control is realized with a dead-beat controller that allows fast tracking of stochastically fluctuating load currents. For the mitigation of stationary load current harmonics, an outer control loop is required that compensates for the persistant phase error caused by the delay of the inner loop. The outer loop developed in this paper is based on integrating oscillators tuned to the major load current harmonics. Mathematically, they are equivalent to I-controllers in rotating reference frames. Some of these oscillators are located within a closed control Loop. For frequencies where the feedback would excite grid resonances they are placed in a prefilter with phase shifting elements. Since all oscillators share a common feedback full selectivity of the harmonic analysis is achieved. For every harmonic the degree of compensation can be adjusted individually. In addition to the oscillators, a direct path is provided that feeds forward the load current to the inner control loop. Thus, load current transients can be tracked with the full speed of the dead-beat controller. The direct path does not affect the harmonic analysis performed by the oscillators. Index Terms--Active filter control, harmonic analysis, integrating oscillator, power quality, rotating reference frame.

The Fas ligand/Fas interaction plays an important role in the regulation of immune responses. Allografted cells undergo Fas-mediated apoptosis induced by CD8+ T cells. Our objective was to prevent human keratinocytes from immunologically induced apoptosis. We focused on three proteins with inhibitory function on Fas-mediated apoptosis. Human keratinocytes were transfected with either Flip, Faim, or Lifeguard (LFG). The treatment proved to be practicable and efficient. The recombinant keratinocytes with expression of our target proteins were cocultured with CD8+ T cells and the apoptotic activity was then evaluated. Activation of caspase-8 was detectable in control but not in the recombinant cells. Quantitative analysis revealed significant induction of T-cell-induced apoptosis in nontransfected keratinocytes (p = 0.04, n = 12) but not in Flip (p = 0.66), Faim (p = 0.42), or LFG (p = 0.44) expressing cells. Our results suggest that heterotopic expression of antiapoptotic proteins can induce the resistance of keratinocytes to a major mechanism of rejection.

The paper proposes the concepts of integrators for sinusoidal signals. A proportional-integral (PI) current controller using stationary-frame generalized integrators is applied for current control of active power filters. Zero steady-state error for the concerned current harmonics is realized, with reduced computation, under unbalanced utility or load conditions. Designing of the PI constants, digital realization of the generalized integrators, as well as compensation of the computation delay are studied. Extensive test results from a 10-kW prototype are demonstrated. Index Terms--Active power filter, current control, generalized integrator, resonator.

A frequency relay capable of under/over frequency and rate of change of frequency measurements has been implemented on a digital signal processor using an instantaneous frequency measuring algorithm. Careful attention to the filtering aspects of the relay is needed under dynamic conditions due to frequency modulation of the input signal. An algorithm for avoiding unwanted relay operation due to impulsive changes in the input signal is presented. Results are shown for simulated tests using computer based relay testing equipment, and for overloads on a micromachine power system simulator. Keywords: Frequency measurement, frequency relaying, digital signal processing