Search

The present work introduced a framework of developing comprehensive extended vehicular trajectory data under heterogeneous non-lane-based traffic conditions like the NGSIM datasets in the United States. Due to the absence of automation and instrumentation, and even the lack of sensor deployment on roads in developing economies like India, it is even more challenging to study driver behavior. A new stitching-based algorithm was used for developing the extended trajectory database for three traffic-flow levels on a 535-m long section of an urban arterial. The algorithm was used to stitch the trajectory data over the segments such that the subject vehicle with continuous trajectory data points over the entire study stretch. The developed framework is a novel tool for establishing a trajectory dataset for mixed traffic, it should be of interest to researchers in developing and developed countries. [ABSTRACT FROM AUTHOR]

For safety messages in a vehicular networking environment, strict messaging frequency requirements exist. For instance, six out of eight cooperative vehicular safety applications, as chosen by the National Highway Traffic Safety Administration and the Crash Avoidance Metrics Partnership, require a minimum of 10 Hz, whereas the precrash sensing application requires an even higher frequency of 50 Hz, for messages that convey the positions of vehicles. Currently, the collisions of periodic safety message broadcasts for the IEEE Wireless Access in Vehicular Environment (WAVE) system are left to the IEEE 802.11p medium access control (MAC) to resolve. With small contention window sizes stipulated in the 802.11p amendment, however, the MAC offers only limited relief to the collision problem, particularly toward the beginning of the control channel (CCH) interval. In this paper, we show that application-level control of the message transmission phase is desirable, when the frequency adaptation is not allowed due to the application requirement. We demonstrate through simulation and analysis that the proposed technique achieves up to 50% higher message reception probability compared with that relying only on the 802.11p MAC. The proposed method works in the safety applications themselves; therefore, the existing standards need not be modified. [ABSTRACT FROM PUBLISHER]

Recent advances in hardware, software, and communication technologies are enabling the design and implementation of a whole range of different types of networks that are being deployed in various environments. One such network that has received a lot of interest in the last couple of years is the Vehicular Ad-Hoc Network (VANET). VANET has become an active area of research, standardization, and development because it has tremendous potential to improve vehicle and road safety, traffic efficiency, and convenience as well as comfort to both drivers and passengers. Recent research efforts have placed a strong emphasis on novel VANET design architectures and implementations. A lot of VANET research work have focused on specific areas including routing, broadcasting, Quality of Service (QoS), and security. We survey some of the recent research results in these areas. We present a review of wireless access standards for VANETs, and describe some of the recent VANET trials and deployments in the US, Japan, and the European Union. In addition, we also briefly present some of the simulators currently available to VANET researchers for VANET simulations and we assess their benefits and limitations. Finally, we outline some of the VANET research challenges that still need to be addressed to enable the ubiquitous deployment and widespead adoption of scalable, reliable, robust, and secure VANET architectures, protocols, technologies, and services. [ABSTRACT FROM AUTHOR]

Vehicular ad hoc network (VANET) or inter-vehicle communication (IVC) provides many brand new and powerful capabilities for transportation system applications. Safety massaging, as one of the capabilities, supports many potential safety applications such as emergency electronic brake lights, lane change warning, pre-crash warning. These applications require a low latency and high reliability communication service. In this paper, we first analyze these critical requirements. The under-development 802.11p for VANET is then discussed with respect to those requirements. An extensive research on the enhancements for 802.11 media access control (MAC) is conducted in order to show their suitability for safety applications. As a conclusion, a realistically feasible MAC enhancement scheme is still needed to achieve the high performance requirements and the compatibility. Copyright © 2008 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Abstract: In this paper we investigate the possibility of a new type of application, namely multiplayer games, in a Vehicular Ad Hoc Network (VANET) environment. First, we analyze the available empirical data on travel and traffic volume in the United States, and point out the most important challenges that have to be met in order to enable multiplayer games over VANET. We then propose a new paradigm of multiplayer games over VANET, one which utilizes the new, interactive and dynamic VANET environment, while adapting to its inherent constraints. [Copyright &y& Elsevier]

Direct radio-based vehicle-to-vehicle communication can help prevent accidents by providing accurate and up-to-date local status and hazard information to the driver. In this paper, we assume that two types of messages are used for traffic safety-related communication: 1) Periodic messages ("beacons") that are sent by all vehicles to inform their neighbors about their current status (i.e., position) and 2) event-driven messages that are sent whenever a hazard has been detected. In IEEE 802.11 distributed-coordination-function-based vehicular networks, interferences and packet collisions can lead to the failure of the reception of safety-critical information, in particular when the beaconing load leads to an almost-saturated channel, as it could easily happen in many critical vehicular traffic conditions. In this paper, we demonstrate the importance of transmit power control to avoid saturated channel conditions and ensure the best use of the channel for safety-related purposes. We propose a distributed transmit power control method based on a strict fairness criterion, i.e., distributed fair power adjustment for vehicular environments (D-FPAV), to control the load of periodic messages on the channel. The benefits are twofold: 1) The bandwidth is made available for higher priority data like dissemination of warnings, and 2) beacons from different vehicles are treated with "equal rights," and therefore, the best possible reception under the available bandwidth constraints is ensured. We formally prove the fairness of the proposed approach. Then, we make use of the ns-2 simulator that was significantly enhanced by realistic highway mobility patterns, improved radio propagation, receiver models, and the IEEE 802.11p specifications to show the beneficial impact of D-FPAV for safety-related communications. We finally put forward a method, i.e., emergency message dissemination for vehicular environments (EMDV), for fast and effective multihop information dissemination of event-driven messages and show that EMDV benefits of the beaconing load control provided by D-FPAV with respect to both probability of reception and latency. [ABSTRACT FROM AUTHOR]

Demand stochasticity is a major challenge for the airlines in their quest to produce profit maximizing schedules. Even with an optimized schedule, many flights on departure have empty seats while others suffer a lack of seats to accommodate passengers who desire to travel. We approach this challenge, recognizing that demand forecast quality for a particular departure date improves as it approaches, by developing a dynamic scheduling approach that reoptimizes elements of the flight schedule during the passenger booking process. The goal is to match capacity to demand given the many operational constraints that restrict possible assignments. We leverage flight retiming as a new dynamic scheduling mechanism and develop a reoptimization model that integrates both flight retiming and refleeting. Our reoptimization approach, redesigning the flight schedule at regular intervals, uses information from both revealed booking data and improved forecasts available at later reoptimizations. We conduct experiments using data from a major U.S. airline and demonstrate that significant potential profitability improvements are achieved. [ABSTRACT FROM AUTHOR]