Search

An inductively coupled plasma sector field mass spectrometer (ICP-SFMS) was used to develop an analytical method for the fast determination of Na, Al, Sc, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Y, Mo, Cd, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Pb in Arctic size-segregated aerosol samples (PM 10 ), after microwave acidic digestion. The ICP-SFMS was coupled with a microflow nebulizer and a desolvation system for the sample introduction, which reduced the isobaric interferences due to oxides and the required volume of sample solutions, compared to the usual nebulization chamber methods. With its very low limit of detection, and taking into account the level of blanks, this method allowed the quantification of many metals in very low concentration. Particular attention was given to Rare Earth Elements (REEs - La to Lu). The efficiency in the extraction of REEs was proved to be acceptable, with recoveries over 83% obtained with a Certified Reference Material (AMiS 0356). The analytical method was then applied to particulate matter samples, collected at ground level in Ny Ålesund (Svalbard Islands, Norway), during spring and summer, from 2010 to 2015, with daily resolution and using a low-volume device. Thus, for the first time, a large atmospheric concentrations dataset of metals in Arctic particulate matter at high temporal resolution is presented. On the basis of differences in LREE/HREE ratio and Ce and Eu anomalies in spring and summer samples, basic information to distinguish local and long-range transported dust were achieved. [ABSTRACT FROM AUTHOR]

A prolonged and exceptionally intense air mass advection event transporting biomass burning aerosols generated in Alaska affected Ny-Ålesund in the mid of July 2015. This paper reports the morphochemical characteristics and mixing state of individual aerosol particles collected during the event. To this aim aerosol samples were collected on nucleopore polycarbonate membrane filters using a DEKATI 12-stage low volume impactor and analyzed by scanning electron microscopy (SEM) techniques. Results of SEM investigations depict a complex aerosol characterized by an external mixing between a main part of carbonaceous organic particles (tar balls and organic particles), lower ammonium sulfate and minor potassium chloride and mineral dust amounts. The carbonaceous particles are spherical to slightly elongated and the organic particles show an internal mixing of low density organics and/or ammonium sulfate upon denser nuclei. Most particles are in the accumulation mode size range although the size and the morphology of the chloride and the sulfate salts evidence the growth of these species both in the air and upon the sampling membranes. Individual particle analyses were complemented by aerosol size distribution (Aerodynamic Particle Sizer, Scanning Mobility Particle Sizer) and optical (Particle Soot Absorption Photometer, nephelometer) measurements at ground level in order to retrieve the optical and radiative properties of the aerosol in the atmosphere and to predict the fate and behaviour of particles upon deposition at ground level. Individual particle analyses were also compared with bulk chemical analyses on daily sampling filters and back-trajectory analyses of the air mass movement in order to enucleate distinct sources of the aerosol during the long range transport. [ABSTRACT FROM AUTHOR]