Search

This study focused on the in-plane rocking behavior of unreinforced masonry (URM) walls. Three URM wall specimens were designed and fabricated based on a typical masonry house in Korea. The experimental parameters were the layout of openings (its presence or absence) and configuration of openings (window or door). Static cyclic loading tests were conducted to investigate nonlinear performance curves of masonry walls subjected to a rocking behavior in the in-plane direction. In this paper, the mortar-joint tensile crack strength and rocking strength of masonry walls (i.e., peak and residual strengths) were evaluated, and the effects of opening configurations on the masonry wall strength were examined, due to the proposed procedure. The deformation capacity of a rocking behavior was also identified by the procedure. As a result, specimens without initial cracks showed the rocking behavior after mortar-joint tensile crack failure, whereas a specimen with initial cracks exhibited only the rocking behavior. Since no remarkable strength deterioration was found until final loading in all specimens, an in-plane rocking URM wall may have very good deformation performance. The estimated mortar-joint tensile crack strength, rocking strength, stiffness, and ultimate deformation were in good agreement with the experimental results, regardless of the layout and configuration of openings. [ABSTRACT FROM AUTHOR]