Search

Tight gas sandstone reservoirs play an important role in the field of exploration and development of unconventional oil/gas resources. However, these reservoirs typically exhibit low-porosity and poor-permeability, with pore structures of strong heterogeneity comprising connected and isolated pores. The traditional rock physics models (such as the Gassmann model) are established under the assumption of fully connected pores, which cannot reasonably describe the complexity in tight reservoirs. In this regard, this work proposes a rock physics modeling approach aimed at tight sandstone reservoirs based on a reformulated Xu–White model. Specifically, the differential effective medium model and Xu–White model are combined to analyze the influences of isolated pores on the dry rock skeleton. To characterize the general effects due to the different pore types on rock elastic moduli, the volume content of connected pores is defined as a pore-connectivity parameter. The simulated annealing algorithm is applied to invert the parameter, which is treated as a weighting coefficient for correcting the wet rock elastic moduli, thereby improving the precision of rock physics modeling. The proposed approach is tested and verified by using the log data of the work area of Sichuan Basin, West China. The result shows that, compared with the conventional method, the P- and S-wave velocities predicted by the proposed method are consistent with the log data. In addition to the inversion results of the conventional petrophysical parameters, the inverted pore-connectivity parameter can be a good auxiliary attribute that assists locating potential targets for tight gas sandstone reservoirs. [ABSTRACT FROM AUTHOR]

Fracture orientation and in particular the fracture strike play an important role in guiding the accurate estimation of the orientation of in situ stress fields. Fracture strike can be extracted based on the azimuthal seismic reflection responses. Thus, the characteristics of seismic reflection responses varying with fracture strike are critical for fracture strike estimation. In this work, a set of vertical fractures with different strikes is introduced into an isotropic host matrix based on the Schoenberg linear-slip theory, and the azimuthal seismic reflection response is modeled based on the reflection/transmission analysis at a plane interface. The effect of fracture parameters, i.e., fracture density, fracture aspect ratio, and fluid infill on the seismic reflection response, is analyzed. The influences of fracture strike on the stiffness matrix are simulated, and we further discuss the impacts on the P- and S-wave velocities. The influences of fracture strike on the reflection coefficient are depicted using the rose diagram method. The proposed workflow is applied to real seismic reflection data. The method is used to estimate the fracture strike with the seismic data in the Sichuan Basin work area by assuming that all fractures are vertically oriented, and the rose diagram is obtained close to the target layer. The results show that the fracture strike predicted by the method is in good agreement with the estimation based on the well-bore imaging data. [ABSTRACT FROM AUTHOR]

The production of shale gas plays an important role in the global oil/gas industries, which is considered to approach about 1/3 of the total natural gas production at 2040. In recent years, Wufeng–Longmaxi Formation shale in Sichuan Basin has become a key target of gas development in China. The detection of high-quality gas-producing areas based on the relation between pore structure, mineralogy and elastic properties is the main research direction. However, the effects of depositional environment and diagenetic processes are rarely considered in the studies of these petrophysical properties. We select core samples from the two boreholes to perform X-ray diffraction experiments together with another set of cores from the target formation to obtain scanning electron microscope images and ultrasonic velocities. The mineralogy, pore structure and elastic properties are analyzed. The formation is divided into two sections based on the reservoir characteristics and sedimentary environments. Then, we study the different diagenetic processes of the upper and lower sections. Three-dimensional rock-physics templates of the shale in the two sections are built by using equivalent medium theories and elastic attributes. The templates are calibrated with the samples and well-log data. A 2D survey line and a 3D seismic block of the upper and lower sections are selected, respectively, to map the mineral component, porosity and microcrack density. The good match between the predictions and log interpretation and actual gas content reports suggests that the rock-physics template based on differential diagenesis can be effectively used for further interpretation of seismic inversion results. [ABSTRACT FROM AUTHOR]

Underground carbonate deposits are widespread worldwide and have considerable hydrocarbon potential. They are generally characterized by a complex microscopic structure that affects the properties of the macroscopic fluid flow and the relevant petrophysical behavior. In recent years, advances in digital technology have helped reveal the microstructures (i.e., pore connections, cracks, pore size and radius, etc.) of rocks in the subsurface. In this work, drill cores (cylinder) are taken from a deep carbonate deposit in the Sichuan Basin in western China to perform computed tomography (CT) scans, thin sections and mineral analysis. The characteristics of lithology and pore structure are investigated. Ultrasonic experiments with different fluid types and pressures are conducted to determine rock samples’ wave velocities, attenuation and crack porosity. The experimental data show that the rocks have low porosity/permeability and a complex pore/crack system, leading to significant pressure, crack and fluid type effects on the velocities, dispersion and attenuation. We develop a model of multiple pore-crack structures for carbonates by considering the complex structure and fluid properties. Digital cores are reconstructed based on CT scans, image processing and threshold segmentation. The aspect ratios of pores and cracks are extracted with their volume fractions to simulate the rock skeleton with the differential effective medium theory. The Biot–Rayleigh wave propagation equations are applied to simulate the effects of different pore and fluid types on the velocity and attenuation of P-waves. The agreement between the modeling results and the ultrasonic and log data confirms that the model can validly reproduce the wave responses. [ABSTRACT FROM AUTHOR]

The prediction of the pore geometrical properties is important in the exploration and development of tight-sandstone hydrocarbon reservoirs. To investigate this topic, we have measured the porosity, permeability, P- and S-wave velocities, electrical conductivity, and axial and radial strains as a function of differential (confining minus pore) pressure of tight-sandstone samples, collected from the Zhongjiang gas field of Sichuan, in West China. The results show that the closure of cracks with pressure highly affects these properties. Then, we propose a multiphase reformulated differential effective-medium (R-DEM) model that employs the unified pore geometry (the same pores or cracks with different aspect ratios and volume fractions) for both elastic and electrical modeling. The model gives the pressure-dependence of the P- and S-wave velocities and electrical conductivity, and the experimental porosity and static moduli are used as constraints to estimate the pore geometry. The model describes the elastic properties of sandstones saturated with nitrogen gas, and the electrical conductivity when the pore fluid is brine. The prediction of the wet-rock S-wave velocities is less accurate, due to the presence of shear stiffening and weakening effects. Furthermore, we compare the results with those of the joint elastic-electrical inversion by using the dynamic instead of the static stiffness modulus. The results show that the latter provides a better agreement between theory and experiment. Subsequently, we show that the pore geometry estimated from the elastic or the electrical measurements separately (unjoint inversion) present discrepancies, indicating that a joint inversion is required. The published experimental data are also used to illustrate the model, and the results are satisfactory. • We have measured the porosity, velocities, electrical conductivity, and axial and radial strains of tight sandstones. • The data are interpreted by a multiphase reformulated differential effective-medium modelwith a unified pore geometry. • The results show that the proposed model successfully explains those properties. [ABSTRACT FROM AUTHOR]

Low porosity-permeability structures and microcracks, where gas is produced, are the main characteristics of tight sandstone gas reservoirs in the Sichuan Basin, China. In this work, an analysis of amplitude variation with offset (AVO) is performed. Based on the experimental and log data, sensitivity analysis is performed to sort out the rock physics attributes sensitive to microcrack and total porosities. The Biot–Rayleigh poroelasticity theory describes the complexity of the rock and yields the seismic properties, such as Poisson's ratio and P-wave impedance, which are used to build rock-physics templates calibrated with ultrasonic data at varying effective pressures. The templates are then applied to seismic data of the Xujiahe formation to estimate the total and microcrack porosities, indicating that the results are consistent with actual gas production reports. [ABSTRACT FROM AUTHOR]