Search

Ten native potato varieties grown in Cusco (at 3,672 m above sea level) were used for starches extraction (at a pilot scale), and their physicochemical, functional, morphological, and structural characteristics were assessed. The content of protein, apparent amylose and phosphorus ranged from 0.1% to 0.44%, 23.42% to 35.5%, and 0.07 to 0.10%, respectively. Starch granules revealed smooth surface, with ellipsoidal and spherical shapes, particle size analysis exhibited bimodal or multimodal distribution, while the averaged crystallinity was 27.7% assessed by XRD. Gelatinization temperatures of the starches ranged from 57.4 to 60.1 °C, 60.8 to 64.3 °C, and 68.4 to 71.1°C for To, Tp, and Tc, respectively; and the gelatinization enthalpies ranged from 15.4 to 17.1 J/g. Respect to pasting properties, the peak viscosity and setback viscosity ranged from 12,970 to 16,970 mPa⋅s and from 968 to 2498 mPa⋅s, respectively. Thermogravimetric analysis (TGA) revealed no significant relationship between apparent amylose content and thermal stability. Therefore, the results reveal subtle differences in the functional characteristics of the starches from the native varieties of potato studied, which can be recommended for food industry applications. PRACTICAL APPLICATION: This study contributes to show several varieties of native potatoes from Cusco and their valorization as nonconventional starch source. Describing the physicochemical, functional, and structural characteristics of these starches could be useful for food industry applications., (© 2021 Institute of Food Technologists®.)

Quinoa has been recognized as a complete food due to its balanced nutritional composition. Quinoa flour is used as an ingredient to improve the nutritional and functional characteristics of cereal-based foods. The physicochemical and functional (thermal and pasting) properties of flours and isolated starches of three Andean Peruvian quinoa varieties (Blanca de Hualhuas, BH; Rosada de Huancayo, RHY and Pasankalla, PK) were studied and the correlation among them properties were evaluated in order to explore their possible uses as a food ingredient. Proximal chemical composition of flour and isolated starches from quinoa varieties showed differences. Isolated starches from quinoa varieties showed a XRD Type A crystallinity patterns with polygonal shapes, small size, higher crystallinity degree and lower amylose content (<15%). The thermal (gelatinization temperatures and enthalpies) and pasting (temperature and time of gelatinization and viscosities) properties of flours and isolated starches showed differences and the principal component analysis demonstrated that those properties are significantly correlated to the starch and fat content. Based on the differences found among physicochemical and functional properties, isolated starch and flour of BH, RHY and PK quinoa varieties have potential as food ingredient for several cereal-based products., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Starch was isolated from three Andean-native crops - arracacha (Arracacia xanthorrhiza), oca (Oxalis tuberosa), and sweet potato (Ipomoea batatas) - for use as a raw material for the production of foam trays. The starches were characterized in their proximal composition, crystallinity, microstructure and thermal properties. The sweet potato starch showed the highest amylose content (42.65%) and the lowest protein content (0.30%). The oca starch granules were larger (10-30 μm) than sweet potato and arracacha starch. The highest crystallinity of sweet potato starch caused larger values of onset temperature (To), peak temperature (Tp), conclusion temperature (Tc) (67.64 °C, 72.83 °C, and 81.20 °C, respectively) than arracacha and oca starch. The novel foam trays showed good appearance, adequate expansion, and low density; however, all foam trays showed a water absorption capacity >50%, which was related to their porosity and low density. Also, sweet potato and oca starch trays showed high tensile strength (0.67 and 0.65 MPa, respectively) compared with arracacha starch trays (0.52 MPa)., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Different Andean crops were used to obtain starches not previously reported in literature as raw material for the production of biodegradable polymers. The twelve starches obtained were used to prepare biodegradable films by casting. Water and glycerol were used as plasticizers. The mechanical properties of the starch based films were assessed by means of tensile tests. Compost tests and FTIR tests were carried out to assess biodegradability of films. The results show that the mechanical properties (UTS, Young's modulus and elongation at break) of starch based films strongly depend on the starch source used for their production. We found that all the starch films prepared biodegrade following a three stage process and that the weight loss rate of all the starch based films tested was higher than the weight loss rate of the cellulose film used as control., (Copyright © 2011 Elsevier B.V. All rights reserved.)

In a study of residues from gourd and squash artifacts, we recovered starch grains from manioc (Manihot esculenta), potato (Solanum sp.), chili pepper (Capsicum spp.), arrowroot (Maranta arundinacea), and algarrobo (Prosopis sp.) from feasting contexts at the Buena Vista site, a central Peruvian preceramic site dating to approximately 2200 calendar years B.C. This study has implications for the study of plant food use wherever gourds or squashes are preserved, documents the earliest evidence for the consumption of algarrobo and arrowroot in Peru, and provides insights into foods consumed at feasts.