Search

Copper (Cu) is a contaminant of potential concern for a uranium mine whose receiving waters are in the World Heritage–listed Kakadu National Park in northern Australia. The physicochemical characteristics of the freshwaters in this region enhance metal bioavailability and toxicity. Seven tropical species were used to assess the chronic toxicity of Cu in extremely soft freshwater from a creek upstream of the mine. Sensitivity to Cu was as follows: Moinodaphnia macleayi > Chlorella sp. > Velesunio sp. > Hydra viridissima > Amerianna cumingi > Lemna aequinoctialis > Mogurnda mogurnda. The 10% effect concentrations (EC10s) ranged from 1.0 µg/L Cu for the cladoceran Moinodaphnia macleayi to 9.6 µg/L for the fish M. mogurnda. The EC50s ranged from 6.6 µg/L Cu for the mussel Velesunio sp. to 22.5 µg/L Cu for M. mogurnda. Geochemical modeling predicted Cu to be strongly bound to fulvic acid (80%–99%) and of low bioavailability (0.02%–11.5%) under these conditions. Protective concentrations (PCs) were derived from a species sensitivity distribution for the local biota. The 99% PC (PC99), PC95, PC90, and PC80 values were 0.5, 0.8, 1.0, and 1.5 µg/L Cu, respectively. These threshold values suggest that the current Australian and New Zealand default national 99% protection guideline value for Cu (1.0 µg/L) would not provide adequate protection in freshwaters of low hardness, particularly for this area of high conservation value. The continuous criterion concentration predicted by the Cu biotic ligand model for conditions of low pH (6.1), low dissolved organic carbon (2.5 mg/L), low hardness (3.3 mg/L), and 27 °C was 0.48 µg/L Cu, comparable with the PC99. Consideration of the natural water quality conditions of a site is paramount for protective water quality guidelines. Environ Toxicol Chem 2022;41:2808–2821. © 2022 Commonwealth of Australia. Environmental Toxicology and Chemistry © 2022 SETAC. [ABSTRACT FROM AUTHOR]

There has been an increased emphasis on incorporating bioavailability‐based approaches into freshwater guideline value derivations for metals in the Australian and New Zealand water quality guidelines. Four bioavailability models were compared: the existing European biotic ligand model (European Union BLM) and a softwater BLM, together with 2 newly developed multiple linear regressions (MLRs)—a trophic level‐specific MLR and a pooled MLR. Each of the 4 models was used to normalize a nickel ecotoxicity dataset (combined tropical and temperate data) to an index condition of pH 7.5, 6 mg Ca/L, 4 mg Mg/L, (i.e., approximately 30 mg CaCO3/L hardness), and 0.5 mg DOC/L. The trophic level‐specific MLR outperformed the other 3 models, with 79% of the predicted 10% effect concentration (EC10) values within a factor of 2 of the observed EC10 values. All 4 models gave similar normalized species sensitivity distributions and similar estimates of protective concentrations (PCs). Based on the index condition water chemistry proposed as the basis of the national guideline value, a protective concentration for 95% of species (PC95) of 3 µg Ni/L was derived. This guideline value can be adjusted up and down to account for site‐specific water chemistries. Predictions of PC95 values for 20 different typical water chemistries for Australia and New Zealand varied by >40‐fold, which confirmed that correction for nickel bioavailability is critical for the derivation of site‐specific guideline values. Environ Toxicol Chem 2021;40:100–112. © 2020 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC. [ABSTRACT FROM AUTHOR]