Search

A Safety Research project was carried out in an ammonia plant of OCI Nitrogen, located at the Chemelot site in Geleen, The Netherlands. This research focused on the development of a method to monitor accident processes in the chemical industry mainly caused by mechanical integrity of static equipment like vessels, tanks and heat exchangers. A significant part of the mechanical integrity failure scenarios originates from material degradation and corrosion mechanisms which may develop over a relatively long-time period, possibly taking months, years or even longer. Mechanical failure scenarios from two process units have been worked out and visualized using a bowtie. The research project shows that the monitoring of early warnings can provide information about the current development of mechanical failure scenarios. In addition, early warnings can be used to initiate inspections if there is a likelihood that the mechanical failure scenario has been activated. Considering the shift from breakdown maintenance to preventive and predictive maintenance and risk-based inspection (RBI), inspections based on early warnings could also be a new step in the field of maintenance efficiency. [ABSTRACT FROM AUTHOR]

Highlights • Dutch safety professionals have gone through major transformations. • From company safety inspectors in the 1920s, safety technicians in the 1950s. • In the 1970s safety officers are dealing with employee behaviour, and organisational aspects. • In the late 1990s safety services are privatized, and safety officers become to safety consultants. • There is a major gap between academic and professional developments in safety. Abstract The origin of occupational safety, as an area of main interest of the government, the industry, the unions, and scientists starts in the Netherlands at the end of the 19th century. Roughly in the same period occupational medicine becomes a separate domain. Only just after World War II are safety professionals organised in associations. Starting as a 'Club/werkgroep van veiligheidsinspecteurs' (Club/Working group of Company Safety Inspectors) in 1947, it changes in 1962 into the 'Nederlandse Vereniging van Veiligheidstechnici, NVVT' (Dutch Association of Safety Technicians). In 1978 there is another change into a professional association, and the 'Nederlandse Vereniging van Veiligheidskundigen, NVVK' (Dutch Association of Safety Professionals) is formed. In 1986 this association is transformed into a knowledge association, the 'Nederlandse Vereniging voor Veiligheidskunde, NVVK' (Dutch Association of Safety Science). Nowadays the NVVK is still a knowledge platform for and by safety experts in the Netherlands. The association is a network of 3000 safety experts in various disciplines and departments, and by far the biggest network of experts on working conditions in the Netherlands. The NVVK is actively involved in changes in legislation and regulations, and also represents the interests of members and safety experts in general. During these 71 years of organised safety professions, major changes in position and content have occurred. [ABSTRACT FROM AUTHOR]

Highlights: [•] Research of a tower crane accident in The Netherlands was conducted by the Dutch Safety Board. [•] The direct accident scenario is ‘load instability’. [•] The tower crane accident was a ‘normal accident’, caused by structural design errors. [•] A CE mark of the crane did not prevent the accident, neither did safety audits and inspections. [•] Once on the market there was no effective safety net to detect the defects. [Copyright &y& Elsevier]

Abstract: The 19th century and first half of the 20th century is one of those periods in history of rapid economical, technical and social changes. There is an ongoing mechanization, followed by a movement to rationalize production and to make it cost effective. This has created a heavy burden of occupational deaths amongst workers. In this period occupational safety is developing into a professional field. Engineers are enclosing hazards and fencing heights, shaping up safety technique, and writing very practical publications on occupational safety. These publications, predominantly published in the United States, are leading to quite some safety related metaphors, with the iceberg and the domino’s as the most famous ones. Sociologists, psychologists, and physicians are more concerned with questions related to accident causation, and these specialists are conducting research leading to two different safety theories. Causes of occupational accident are found either in the workers’ capacity to handle hazardous situations, or in external causes, like very long working hours, dangerous machines and the increased pressures of work and speed of production. The Pittsburgh survey, the first extended analysis of occupational accidents in a steel district, strongly advocated the environmental hypothesis, while the so-called ‘individual hypothesis’ is favored by the American Safety First Movement, starting as a private initiative in 1906 by US Steel, and later spreading out over Western European countries. The British Industrial Fatigue Board has given the individual hypothesis its scientific justification. Despite scientific criticism just after World War II on the concept of accident proneness and ‘unsafe acts’, its popularity is not fading. Even nowadays the famous metaphors are still part of the vocational training of safety experts, also in The Netherlands. Apparently professional and scientific developments in occupational safety are belonging to two separate worlds. Before World War II, The Netherlands is not a leading country in occupational safety but a follower, first of France and the German speaking countries. After World War I its focus is directed towards the Anglo-Saxon countries. [Copyright &y& Elsevier]

Serious incidents in the 1970s and continuous growth of factories producing and/or using hazardous substances formed the basis of a quantitative approach to risk. While discussions of risk were conducted in all industrialised countries they were particularly important in The Netherlands due to space limitations and short distances between industrial plants and residential areas. This article is part of a series covering the history of the safety science discipline (Swuste et al., 2015; Van Gulijk et al., 2009; Swuste et al., 2010). The concept risk entered the Dutch safety domain before the 1970s in relatively isolated case studies and in managing flood defences in The Netherlands. Since the 1970s these case studies paved the way for the development of mathematical models for quantitative risk analysis that were based on experience from nuclear power plants, the process industries and reliability engineering from operations research. ‘External safety’ was a focal point for these early developments in the process industries: adverse effects of dangerous goods outside the factory’s property boundaries. The models were documented in standardised textbooks for risk analysis in The Netherlands, the so-called ‘coloured books’. These works contributed to the development of the Seveso Directive. For internal safety (taking place within property boundaries) semi-quantitative approaches were developed simultaneously. The models for quantitative risk analysis were deemed reliable, but the acceptability of a quantified risk was another matter. Making decisions on risk relates to complex societal issues, such as ethics, stakeholder perception of risks, stakeholder involvement, and politics, all of which made the decision making process far from straightforward. With the introduction of the abstract concept of risk in the Dutch safety science domain, the question of risk perception became important in Dutch safety research. The concept risk and methods for quantitative risk analysis first entered into Dutch law in environmental risk regulations. It took a while for risk to be accepted by occupational safety experts, but just before the turn of the century ‘occupational risk inventory and evaluations’ or RI&E methods were introduced into Dutch occupational safety legislation. This finalised the paradigm shift to risk-based safety-decision making in the Dutch safety science domain. While methods for quantifying risk are now widely applied and accepted, the proper use of risk perception and risk in the political decision process are still being debated. [ABSTRACT FROM AUTHOR]

In a rural area widespread pollution of friable and non-friable waste products was present, used to harden dirt tracks, yards, and driveways during 1935-1974. Exposure to environmental asbestos was assessed by a site approach, based on number of polluted sites within postal code areas, and by a household approach, based on number of households in the close vicinity to polluted sites within postal code areas. Based on asbestos soil investigations, 293 sites were identified with asbestos waste material at the surface, of which 77% contained crocidolite fibres as well as chrysotile fibres. The 293 sites-at-risk varied from 5 m(2) to 2722 m(2) and were surrounded by 347 households within 100 m of these sites. Distance to the plant was associated with the number of sites (r=0.36), and with the number of households (r=0.52). However, categorization of postal code areas into low, intermediate or high likelihood of exposure to asbestos showed a modest agreement between the site and household approach. In the site approach a total of 2.3 million person-years at risk were estimated with an average exposure of 1674 fibres/m(3) and an expected 1.8 cases of malignant mesothelioma each year. The household approach resulted in estimates of 1.2 million person-years at risk, and 0.9 cases of malignant mesothelioma per year, respectively. This study illustrates that asbestos waste on the surface of roads and yards in an area with over 130,000 inhabitants may result in long-term exposure to asbestos that will cause several cases of malignant mesothelioma each year. Although distance to plant, number of polluted sites and number of exposed household were associated, the modest agreement among these measures of exposure indicate that the exposure assessment strategy chosen in a particular study may result in considerable misclassification. Without detailed information on individual behaviour within the polluted area, it is difficult to show that a more individually oriented approach will perform better than an ecological approach.

The aim of this article was to describe the structure and content of a job-exposure matrix (JEM) for historical asbestos exposure in The Netherlands. The JEM contained 309 occupational job title groups in 70 branches of industry during 10 periods of 5 years during 1945-1994, resulting in 3090 evaluations. Dutch sources on asbestos exposure measurements provided quantitative guidance for 69 evaluations (2.2%) in 25 occupational title groups. In addition, three databases from the UK Health and Safety Executive contributed to 222 evaluations (7.2%) and several other sources aided in another 133 evaluations (4.3%). These evaluations resulted in seven categories of exposure levels for all 3090 combinations of occupational title groups and periods. A verification process with five experts was used to adjust the assignments of exposure categories. The trends in exposure patterns over time were described in relation to production activities, operational control measures and the presence of dust control measures. For the majority of asbestos-related diseases in the past decades, reliable information on their historical exposure patterns was lacking. The limited availability of exposure measurements in the past illustrates the need for a structured assessment of historical asbestos exposure through a JEM.

In The Netherlands the number of asbestos-related diseases is increasing. An age-cohort model predicts a steep rise in pleural mesothelioma deaths up to 490 cases per year among men, with a total death toll close over 12,000 cases during 2000-2028. In the past decade the number of compensation claims for asbestos-related diseases has more than doubled, with increasingly verdicts in favor of claimants. In addition to the medical information, information about the state of the art of preventive measures in different periods of time plays a decisive role in these claims. The use of asbestos in The Netherlands, the occurrence of asbestos-related diseases, the national asbestos regulations, and the position of the claimants in asbestos lawsuits in The Netherlands are reviewed.

Objective: To describe the occupational background of cases with an asbestos-related disease and to present overall mesothelioma risks across industries with historical exposure to asbestos., Methods: For the period 1990-2000, cases were collected from records held by two law firms. Information on jobs held, previous employers, activities performed and specific products used were obtained from patients themselves or next of kin. Branches of industry and occupations were coded and the likelihood of asbestos exposure was assessed. For each branch of industry, the overall risk of mesothelioma was calculated from the ratio of the observed number of mesothelioma cases and the cumulative population-at-risk in the period 1947-1960. In order to compare mesothelioma risks across different industries, risk ratios were calculated for the primary asbestos industry and asbestos user industries relative to all other branches of industry., Results: In total, 710 mesotheliomas and 86 asbestosis cases were available. The average latency period was approximately 40 yr and the average duration of exposure was 22 yr. Ship building and maintenance contributed the largest number of cases (27%), followed by the construction industry (14%), the insulation industry (12%), and the navy and army, primarily related to ship building and maintenance (5%). In the insulation industry, the overall risk of mesothelioma was 5 out of 100 workers, and in the ship building industry, 1 out of 100 workers. The construction industry had an overall risk comparable with many other asbestos-using industries (7 per 10,000 workers), but due to its size claimed many mesothelioma cases., Conclusion: The majority of cases with asbestos-related diseases had experienced their first asbestos exposure prior to 1960. For cases with first asbestos exposure after 1960, a shift was observed from the primary asbestos industry towards asbestos-using industries, such as construction, petroleum refining, and train building and maintenance. Due to the long latency period, asbestos exposure from 1960 to 1980 will cause a considerable number of mesothelioma cases in the next two decades.