Search

Previous studies have reported that compared to commoners in Japan's Edo period, samurai had long heads, more dental irregularities, and slightly worn teeth. However, these studies did not measure the mandible or only measured length. Angular analysis is essential to evaluate the maxillofacial morphology, but there are no comparative studies of samurai and commoners. This study explored the differences in maxillofacial morphology between samurai and commoners in the Edo period. Thirty male skeletons (samurai) and thirty-eight male skeletons (commoners) were used as materials from the National Museum of Nature and Science. The selected specimens were adults aged between 20 and 59 years without serious skeletal damage and with stable occlusion of the molars. We used three-dimensional scanning to measure the specimens' skeletal, alveolar, and facial widths. The mandibular plane angle and the gonial angle were significantly larger in the samurai than in the commoners. The ratio of the intermandibular first molars, interzygomatic arch, and mandibular width was significantly shorter in the samurai than in the commoners. The samurai had a high angle tendency and smaller mandibular width than the commoners, reflecting the class system.

The purpose of the present study is to investigate the pattern of fluctuating odontometric asymmetry of permanent mandibular first and second molars in a Japanese population. Dental plaster casts of 112 (57 males and 55 females) Japanese undergraduate dental students were used. The mesiodistal and buccolingual diameters of the whole crown and trigonid and talonid crown components were taken on the left and right sides of the mandibular permanent first and second molars. Crown areas were also calculated. The fluctuating asymmetry (FA) value was obtained by dividing the absolute side difference by the absolute mean size of the left and right teeth: FA = abs (R-L)/((R + L)/2). Fluctuating asymmetry between mandibular first and second molars was significantly different with the mandibular second molar showing higher asymmetry in both males and females. Meanwhile, fluctuating asymmetry between males and females in the first and second molars was not significantly different in all measured dimensions. With regard to trigonid and talonid components, fluctuating asymmetry of the distal talonid area was significantly larger than the mesial trigonid area in the mandibular permanent first molar of males (P < 0.01), and asymmetry of buccolingual diameter of the talonid was also larger than that of the trigonid in the mandibular permanent second molar of males (P < 0.05). In conclusion, these findings suggest that the crown dimensions of later developing teeth in the mandibular molar tooth class and crown component in the same molar tooth show more asymmetry and, therefore, are more affected by external factors.

The purpose of this study was to evaluate the correlation and distribution of dental postgraduate residents, dentists and clinical training facilities in each prefecture to analyze the regional distribution and supply of dentists in Japan. The results were also compared with referential data for medicine. The coefficient of correlation between the dentist index and dental postgraduate resident index was r = 0.76 (P < 0.001) in 2006. The distribution (coefficient of variation) was greatest for the dental postgraduate resident index. The numbers of dentists per 100,000 population in prefectures with dental colleges were significantly higher in 1986, 1996 and 2006 for each comparison (P < 0.001). Coefficients of correlation between dentist index and dental postgraduate resident index were r = 0.65 (P < 0.01) in prefectures with dental colleges and r = 0.11 in those without dental colleges in 2006. The prefectures with high level of numbers of cooperative-type clinical training facilities had dental colleges.

The aims of this study were to investigate gender differences in frontal sinus morphology and to estimate differences between Fijian and Western Samoan populations. Cephalograms of 118 Fijians (59 male, 59 female), 80 W. Samoans (33 male, 47 female) and 89 Japanese (60 male, 29 female) were used in this study. The thickness of the frontal sinus and the convexity of glabella in males were found to be larger than those of females in each population. The angle of Sg-N-G in the Fijians was larger than that of the Western Samoans and Japanese. In order to compare the frontal sinus morphology among populations, Mahalanobis' generalized distances were calculated on the basis of the five distance diameters. The results indicate that gender is separated by the first axis which indicates the overall size. Japanese samples were separated from South Pacific samples by the second axis which indicates the shape factor. In populational discrimination, there was a higher percentage of correct discriminations of the females of the males. In conclusion, gender difference was recognized in the size of the frontal sinus, and the populational differences were shown in the shape factor between Melanesian and Polynesian populations, and also between South Pacific and Japanese populations.

The purpose of this study was to provide information about arch shape variations among South Pacific populations. The application of Fourier transforms, Y(phi i) = ao/2 + sigma (aicos phi i + bisin phi i) was used to separate two components of variation; size and shape. Dental arch size can be described by one coefficient (ao), while the shape can be summarized by the first three harmonics (amp1-3) in the Fourier series. The materials used in this study were dental casts of South Pacific populations (Fiji, Western Samoa and Kiribati), Australian Aboriginals and Japanese. Fijians, Western Samoans and Kiribati people have larger upper and lower dental arches than that of Japanese. These populations were separated by the arch size and first Fourier amplitudes which showed the arch depth/width ratio. The Fijian upper and lower dental arches were significantly larger than those found in other populations and was characterized by a wide posterior arch breadth. The Western Samoan and Kiribati arch shape was more similar to the Japanese arch shape than the Fijian. Distribution patterns of arch shape characteristics in these populations showed the same tendencies in the upper and lower arches.

The aims of this study were to investigate the relationships between the cranial base and maxillofacial morphology in Japanese crania, and to examine the differences between Class I and Class II samples. Data were obtained from 46 male Japanese crania from the collection of the Jikei University School of Medicine (Tokyo). The sample represents populations which would have lived during the last 100 years. A principal component analysis of linear and angular measurements showed that the anterior and posterior cranial base, and the cranial base angle were associated in different ways with different aspects of maxillofacial morphology. Variation in the anterior cranial base was associated with differences in facial height, lower facial height, bicondylar breadth, ramal height, and ramal width, while posterior cranial base length was correlated with bizygomatic breadth. The cranial base angle was negatively correlated with SNA (r = -0.46) and SNB (r = -0.59), and positively correlated with the palatal and occlusal plane angles. There were significant differences between Class I and Class II specimens in palatal width, SNA, ANB, and the palatal plane angle, but no significant difference in cranial base length or angle. The evidence suggested that cranial base shape and size was related to facial length, inclination of the maxilla, and both maxillary and mandibular prognathism.

Teeth extracted from Japanese male cadavers were analyzed from the morphogenetic point of view. Variables were buccolingual crown diameter, mesiodistal crown diameter, crown height, root length and total length. Each dimension was analyzed separately by means of principal component analysis with varimax rotation. Components extracted from crown dimensions and total length showed 3 or 4 of 5 underlying components for morphogenetic field, anterior group, molar, premolar, canine and incisor. However, for crown height and root length, the components were less distinct.

The frequency of occurrence of anomalous cusps or tubercles on human upper first molars was investigated in seven racial populations using moiré contourography, which permits the three-dimensional measurement of minute cusps. Tubercles on the mesial marginal ridge were more frequently found in Mongoloid populations (Japanese and Eskimo) than in others. The frequency of the protoconule was high in Eskimos and Negroids (Bantu and San). The lingual paracone tubercle (mesial cusp) showed a particularly high frequency in Australian aborigines. The metaconule was rare or absent in all of the populations. Caucasoid groups (Dutch White and Asiatic Indian) showed generally low frequencies of all these abnormal tubercles, especially the distal accessory cusp (C5). Racial differences in the frequencies of occurrence may offer a key to understanding the adaptive significance of these traits and human microevolution. Confusion in nomenclature for upper molar tubercles is also discussed.

The three-dimensional measurement of the parietal curvature in Japanese was accomplished with the use of moiré contourography and the sexual dimorphism was observed in it. Principal component analysis was also carried out and 4 important features of the shape of this bone were abstracted. Those were the degree of the curvature as a whole, lateral swellings, bilateral difference and posterior swelling.

Moiré photographs of the occlusal surface of first molars of Japanese children were taken by means of a specially designed moiré contourograph apparatus. They were then used for three-dimensional measurements. The heights of 4 cusps and some other points were measured by counting contour lines. Distances and angles between them were also measured. Sex differences of these measurements are found mainly around the metacone and hypocone. There is no clear correlation of the four cuspidal heights to the distances between them.

The occlusal surfaces of the first upper molars of a Dutch population were measured three-dimensionally by moiré contourography. Cusps and ridges were higher than those of a Japanese population, but distances between cuspal tips were smaller. Differences in occlusal form may influence jaw movements in the two populations.

Relationships of cusp height between the upper and lower first molars and between the deciduous second molars in Japanese subjects were analyzed with the aid of moiré contourography. In permanent molars, the height of the hypoconid had a mean value similar to that of the upper trigonal cusps, indicating that upper and lower functional cusps of the same height occlude with each other. In deciduous second molars, however, hypoconid heights were significantly smaller than trigonal cusp heights. Such differences in cusp height between permanent and deciduous dentition may be related to the function and phylogeny of tooth or jaw movements.

The occlusal surfaces of lower first molars of Australian Aboriginals were measured in three dimensions with the aid of Moiré contourography. Molar cuspal heights in this population were higher than in Japanese (Mongoloid) but lower than in Dutch (Caucasoid) populations. Intercuspal distances were considerably larger than those in the two other populations. Populational differences in occlusal features may influence both craniofacial structures and jaw movements in the three populations. Low correlations between the cuspal heights and the intercuspal distances in the other two populations were also found in this population, indicating that human molar cuspal height is independent of the transverse size of the crown. Mean values for the height of the three principal cusps in lower first molars were less than those in upper ones. However, the height of the hypoconid, which was the highest in the lower molar cusps, showed almost the same mean value as the height of the upper three principal cusps, indicating that the height of the main functional cusp, in both upper and lower first molars, was almost the same.

Three-dimensional morphology of the occlusal table of the upper first molars was compared in seven racial populations. Materials were moiré contourograms collected by ourselves over 5 years. Intercuspal distances and cuspal heights were comparatively studied in this analysis. When the populations were arranged in the order of these sizes, their arrangements based on intercuspal distances and cuspal heights were quite different from each other. When intercuspal distances were scaled by protocone-paracone distance, the distances connecting distal cusps were significantly smaller in Mongoloids (Japanese and Eskimo) than in Caucasoids (Dutch and Asiatic Indian), which suggests a reduction tendency of distal cusps in Mongoloids. This tendency was intermediate in Negroids and Australoid. Principal coordinate analysis was carried out on the basis of a similarity matrix including both intercuspal distances and cuspal heights. The result suggested that the three-dimensional shape of the occlusal table was distinguishable in four representative racial populations.

Materials used were dental casts of the upper first molars of modern Japanese subjects, comprising 29 males and 25 females. Their molar occlusal surfaces were photographed by moiré contourography using the standard trigonal plane. The ridges of a cusp, comprising a central ridge and mesial and distal accessory ridges, were identified from the patterns of the moiré fringes. The central ridge was observed in all cusps except for the hypocone in both sexes. Frequencies of the mesial and distal accessory ridges of trigonal cusps were over 90% except for the distal accessory ridge of the metacone, and those of the hypocone were under 25% in both sexes. These values were generally higher in males than in females, especially for the distal accessory ridge of the metacone. The running pattern of the cuspal ridges showed little difference between sexes. The oblique ridge which was higher than the central groove formed a saddle-like structure. This ridge was observed in all materials, but its heights and structural components varied remarkably. In this study, the distal accessory ridge of the metacone was found to be incorporated into the oblique ridge in about 13% of cases. Variability in the running pattern of the ridges within a single cusp was highest in the hypocone and lowest in both the paracone and protocone. The results obtained are considered to represent the stability or reductive tendency of cusps in the upper first molars.