Search

Abstract: Reduced activation ferritic/martensitic steels (RAFMs) are recognized as the primary candidate structural materials for fusion blanket systems. The RAFM F82H was developed in Japan with emphasis on high-temperature properties and weldability. Extensive irradiation studies have conducted on F82H, and it has the most extensive available database of irradiated and unirradiated properties of all RAFMs. The objective of this paper is to review the R&D status of F82H and to identify the key technical issues for the fabrication of an ITER test blanket module (TBM) suggested from the recent research achievements in Japan. This work clarified that the primary issues with F82H involve welding techniques and the mechanical properties of weld joints. This is the result of the distinctive nature of the joint caused by the phase transformation that occurs in the weld joint during cooling, and its impact on the design of a TBM will be discussed. [Copyright &y& Elsevier]

In the fusion reactor design study at Japan Atomic Energy Institute (JAERI), several waste management strategies were assessed. The assessed strategies are: (1) reinforced neutron shield to clear the massive ex-shielding components from regulatory control; (2) low aspect ratio tokamak to reduce the total waste; (3) reuse of liquid metal breeding material and neutron shield. Combining these strategies, the weight of disposal waste from a low aspect ratio reactor VECTOR is expected to be comparable with the metal radwaste from a light water reactor (∼4000 t). [Copyright &y& Elsevier]

Micro-indentation hardness was measured for the irradiated F82H steels by single (10.5 MeV Fe3+) beam or dual (10.5 MeV Fe3+ and 1.05 MeV He+ ions) beam at the TIARA facility in JAERI. The extra component of radiation hardening due to helium was slightly detected in the dual-beam (10 appmHe/dpa) irradiation at 633 K up to 33 dpa. As increased the ratio of He/dpa (100 appmHe/dpa), the extra component due to helium was increased. The microstructures in single/dual (10 appmHe/dpa) ion beam irradiated F82H steels consisted of interstitial loops and defect clusters at 50 dpa. However, at a higher ratio of He/dpa (100 appmHe/dpa), nano-voids were also observed in dual ion irradiated F82H. [Copyright &y& Elsevier]

Abstract: Several types of reduced activation ferritic/martensitic (RAFM) steel have been developed over the past 30years in China, Europe, India, Japan, Russia and the USA for application in ITER test blanket modules (TBMs) and future fusion DEMO and power reactors. The progress has been particularly important during the past few years with evaluation of mechanical properties of these steels before and after irradiation and in contact with different cooling media. This paper presents recent RAFM steel results obtained in ITER partner countries in relation to different TBM and DEMO options. [Copyright &y& Elsevier]

UVA radiation is the most prevalent component of solar UV radiation; it deeply penetrates into the skin and induces profound alterations of the dermal connective tissue. In recent years, the detrimental effects of UVA radiation were more precisely demonstrated at cellular and molecular levels, using adequate methods to identify biological targets of UVA radiation and the resulting cascade impairment of cell functions and tissue degradation. In particular gene expression studies recently revealed that UVA radiation induces modulation of several genes confirming the high sensitivity of dermal fibroblasts to UVA radiation. The major visible damaging effects of UVA radiation only appear after years of exposure: it has been clearly evidenced that they are responsible for more or less early signs of photoageing and photocarcinogenesis. UVA radiation appears to play a key role in pigmented changes occurring with age, the major sign of skin photoaging in Asians. Skin susceptibility to photoaging alterations also depends on constitutive pigmentation. The skin sensitivity to UV light has been demonstrated to be linked to skin color type., (© 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

To identify medical and administrative revenue trends at a surgical center, for use in strategic planning, an off-line data processing system utilizing coding sheets was developed. Data on 66,402 surgical procedures performed at the Osaka University Hospital Surgical Center between 1966 and 1981 were processed to study trends in revenues. Trend analysis shows that (a) revenues at the surgical center have been increasing year by year; (b) technical charges, such as operation and anesthesia fees, have increased with each revision of the medical remuneration system of Japanese government health insurance; and (c) the length of time patients stay in the operating room has gradually increased.