Search

Abstract: The Corvara landslide is an active slow moving rotational earth slide - earth flow, located uphill of the village of Corvara in Badia, one of the main tourist centres in the Alta Badia valley in the Dolomites (Province of Bolzano, Italy). Present-day movements of the Corvara landslide cause National Road 244 and other infrastructures to be damaged on a yearly basis. The movements also give rise to more serious risk scenarios for some buildings located in front the toe of the landslide. For these reasons, the landslide has been under observation since 1997 with various field devices that enable slope movements to be monitored for hazard assessment purposes. Differential GPS measurements on a network of 47 benchmarks has shown that horizontal movements at the surface of the landslide have ranged from a few centimetres to more than 1 m between September 2001 and September 2002. Over the same period, vertical movements ranged from a few centimetres to about 10 cm, with the maximum displacement rate being recorded in the track zone and in the uppermost part of the accumulation lobe of the landslide. Borehole systems, such as inclinometers and TDR cables, have recorded similar rates of movement, with the depths of the major active shear surfaces ranging from 48 m to about 10 m. From these data, it is estimated that the active component of the landslide has a volume of about 50 million m3. In this paper the monitoring data collected so far are presented and discussed in detail to prove that the hazard for the Corvara landslide, considered as the product of yearly probability of occurrence and magnitude of the phenomenon, can be regarded has as medium or high if the velocity or alternatively the volume involved is considered. Finally, it is also concluded that the monitoring results obtained provide a sound basis on which to develop and validate numerical models, manage hazard and support the identification of viable passive and active mitigation measures. [Copyright &y& Elsevier]