Search

This study aimed at assessing the effects of two infra-vitam traits, specifically the slaughter weight (SW) and the ultrasound backfat depth (BCKF) on several post-mortem and quality traits of typical Prosciutto Veneto protected designation of origin (PDO) dry-cured ham. The trial was conducted on a population of 423 pigs fed using different strategies to generate a high variation in SW (175 ± 15.5 kg) and BCKF (23.16 ± 4.14 mm). All the left thighs were weighed at slaughter and the ham factory during the different processing phases. The fat cover depth of green trimmed hams was measured. Data were analyzed with a linear model including SW classified in tertiles, BCKF as a covariate, SW × BCKF interaction, sex, batch, and pen nested within batch. Our results highlighted that, for each 10 kg increase in SW, trimmed and seasoned ham weights increased by 0.76 and 0.54 kg, respectively. The increase in SW significantly reduced relative curing and deboning losses but did not affect ham fat cover depth and trimming losses. A rise in BCKF increased the ham fat cover depth and trimming losses and decreased the curing and deboning losses. Increases in SW and BCKF improved quality traits of the seasoned ham including fat cover depth, visible marbling, inner lean firmness, and fat color. These findings confirm the feasibility of increasing SW and BCKF, which will result in a reduction in the relative losses associated with the dry-curing process while improving the quality of the seasoned ham., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

To explore the influence of 4 feeding strategies on dry-cured ham quality, 336 barrows and gilts (3 batches, 112 pigs/batch) of 90 kg body weight (BW), were divided into 4 groups and housed in 8 pens with automated feeders. In the control group (C), the pigs were fed restrictively medium-protein feeds and slaughtered at 170 kg BW (SW) and 265 d of slaughter age (SA). With the older age (OA) treatment, the pigs were restrictively fed low protein feeds and slaughtered at 170 kg SW and 278 d SA. The other two groups were fed ad libitum high protein feeds, the younger age (YA) group was slaughtered at 170 kg SW and 237 d SA, the greater weight (GW) at 265 d of SA and 194 kg SW. The hams were dry-cured and seasoned for 607 d, weighed before and after seasoning and deboning. Sixty hams were sampled and sliced. The lean and the fat tissues were separated and analyzed for proximate composition and fatty acid profile. The model of analysis considered sex and treatment as fixed factors. With respect to C: i) OA lowered the ham weight, the lean protein content, increased marbling and decreased the PUFA proportion in intramuscular and subcutaneous fat; ii) YA hams had thicker fat cover with lower PUFA in intramuscular and subcutaneous fat; iii) GW increased the deboned ham weight, fat cover depth and marbling, reduced PUFA in intramuscular and subcutaneous fat, without alteration of the lean moisture content. Sex had a negligible impact., Competing Interests: Declaration of Competing Interest None., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The objectives of this study were to estimate, for the Italian Simmental cattle population, genetic parameters for 92 traits and their infrared predictions (IP) and to investigate the genetic relationship between measured traits (MT) and IP. Data for milk fat fatty acid composition (n = 1,040), detailed protein composition (n = 3,337), lactoferrin (n = 558), pH (n = 3,438), coagulation properties (n = 3,266), curd yield and composition obtained by a micro-cheese making procedure (n = 1,177), and content of Ca, P, Mg, and K (n = 689) were obtained using reference laboratory analysis. Infrared prediction for all the investigated traits was performed using 143,198 spectra records belonging to 17,619 Italian Simmental cows. (Co)variance components for MT and their IP were estimated in a set of bivariate animal model REML analyses and genetic correlations between MT and IP were estimated using all IP obtained at the population level. A significant positive relationship was observed between the coefficient of determination of the infrared prediction models and the phenotypic and genetic variation of the IP. The decrease in the estimated genetic variance of IP compared with MT was on average 64%. For traits exhibiting calibration models with coefficients of determination in cross-validation (R 2 CV ) greater than 0.9, the decrease in the genetic variance ranged from approximately 20 to 50%. Most traits (88 out of 92) exhibited lower heritability estimates for IP than for the corresponding MT. The estimated genetic correlations between IP and MT (r a ) were in general very high. A positive relationship (r = 0.57) between R 2 CV of calibration models and the estimated r a has been detected. For calibration models exhibiting R 2 CV higher than 0.75, r a were greater than 0.9. The variability in the estimated correlations increased when R 2 CV decreased, and for calibration models of moderate predictive ability, estimates of r a ranged from 0.2 to 1. Genetic parameter estimates suggested that IP can be used as indicator traits in breeding programs for the enhancement of fine composition and technological properties of milk. The genetic gain achievable selecting for IP is expected to be high for fatty acid composition, minerals, and for technological properties of milk, whereas it will be low for casein and whey protein composition and for the content of lactoferrin., (Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

The aim of this study was to investigate genetic relationships between beef traits of station-tested young bulls and carcass and meat quality traits (MQ) of commercial intact males in Piemontese cattle. Phenotypes for daily gain (DG) and live fleshiness traits (width at withers: WW; shoulder muscularity: SM; loin width: LW; loin thickness: LT; thigh muscularity: TM; thigh profile: TP) and thinness of the shin bone (BT) were available for 3,109 and 2,183 performance-tested young bulls, respectively. Carcass daily gain (CDG), carcass conformation (SEUS), pH at 24 h (pH24h) and 8 d after slaughter (pH8d), lightness (L*), redness (a*), yellowness (b*), hue angle (HA), saturation index (SI), drip loss (DL), cooking loss (CL), and shear force (SF) were assessed for 1,208 commercial intact males. (Co) variance components were estimated in a set of twelve 9-traits analyses using REML and linear animal models including all performance-test traits and 1 carcass or MQ trait at a time. Heritabilities ± SE of beef traits ranged from 0.26 ± 0.03 (LW) to 0.47 ± 0.01 (DG), whereas those of carcass traits and MQ from 0.06 ± 0.03 (CL) to 0.63 ± 0.04 (HA). The genetic correlation (rg) between DG and CDG was 0.75 ± 0.10, indicating that DG, as measured at the test station, is a good indicator of the carcass gain achieved by commercial animals under farms conditions. Daily BW gain of station-tested bulls correlated positively with color traits (from 0.11 ± 0.12 to 0.54 ± 0.09), ph8d (rg ± SE = 0.31 ± 0.11), DL (rg ± SE = 0.29 ± 0.17), and CL (rg ± SE = 0.27 ± 0.18). Live fleshiness of station-tested bulls exhibited genetic correlations with MQ of commercial animals that were positive for L* and b* (from 0.13 ± 0.08 to 0.65 ± 0.14) and negative for pH (from -0.27 ± 0.15 to -0.57 ± 0.11), CL (from -0.16 ± 0.23 to -0.43 ± 0.22), and SF (TM: rg ± SE = -0.31 ± 0.15; TP: rg ± SE = -0.41 ± 0.17). The thinness of the shin bone correlated unfavorably with CDG (rg ± SE = -0.74 ± 0.07) and favorably with SEUS (rg ± SE = 0.65 ± 0.17), CL (rg ± SE = -0.39 ± 0.13), and SF (rg ± SE = -0.32 ± 0.17). The estimated genetic correlations indicate that selection to increase DG, as measured at the test station, exerts moderate adverse effects on MQ. Because selection emphasis is greater for live fleshiness than for DG, the correlated response in MQ and carcass traits is expected to be influenced to a greater extent by selection for muscularity, even though these traits are less heritable than DG.

Five single-nucleotide polymorphisms (SNPs) located in the calpain 1, (mu/I) large subunit (CAPN1), calpastatin (CAST), and cathepsin D (CTSD) genes were analyzed in a large sample of Piemontese cattle. The aim of this study was to evaluate allele and genotype frequencies of these SNPs and to investigate associations of CAPN1, CAST, and CTSD gene variants with meat quality traits. Minor allele frequencies ranged from 30 to 48%. The presence of the A allele at CAPN530 increased yellowness and drip loss. The CAST282 G allele was associated with an increased drip loss compared to the C allele, and the CAST2959 A allele decreased redness compared to the G allele., (© 2012 The Authors, Animal Genetics © 2012 Stichting International Foundation for Animal Genetics.)

Milk coagulation properties (MCP) are an important aspect in assessing cheese-making ability. Several studies showed that favorable conditions of milk reactivity with rennet, curd formation rate, and curd strength, as well as curd syneresis, have a positive effect on the entire cheese-making process and subsequently on the ripening of cheese. Moreover, MCP were found to be heritable, but little scientific literature is available about their genetic aspects. The aims of this study were to estimate heritability of MCP and genetic correlations among MCP and milk production and quality traits. A total of 1,071 Italian Holstein cows (progeny of 54 sires) reared in 34 herds in Northern Italy were sampled from January to July 2004. Individual milk samples were collected during the morning milking and analyzed for coagulation time (RCT), curd firmness (a30), pH, titratable acidity, fat, protein, and casein contents, and somatic cell count. About 10% of individual milk samples did not coagulate in 31 min, so they were removed from the analyses. Estimates of heritability for RCT and a30 were 0.25 +/- 0.04 and 0.15 +/- 0.03, respectively. Estimates of genetic correlations between MCP traits and milk production traits were negligible except for a30 with protein and casein contents (0.44 +/- 0.10 and 0.53 +/- 0.09, respectively). Estimates of genetic correlations between MCP traits and somatic cell score were strong and favorable, as well as those between MCP and pH and titratable acidity. Selecting for high casein content, milk acidity, and low somatic cell count might be an indirect way to improve MCP without reducing milk yield and quality traits.