Search

Cultural heritage is one of the most exceptional resources characterizing the Italian territory. Archaeological heritage, i.e., the archaeological sites with different types of archaeological artifacts, strongly contributes to enriching the national and international cultural heritage. Nevertheless, it is constantly exposed to external factors, such as natural deterioration, anthropic impact, and climate-related hazards, which may compromise its conservation. In Italy, many archaeological areas are affected by significant soil settlements that involve a large part of monuments. This paper focuses on the landslide hazard assessment of the archaeological site of Pietrabbondante (Molise region, Italy). The impact of the expected rainfall regimes, according to the EURO-CORDEX projections, on slope stability conditions were evaluated through the application of a physically based model that couples a hydraulic and a mechanical model to evaluate slope stability evolution due to pore pressure changes. Given the unavoidable lack of knowledge of the geotechnical soil properties in an archaeological heritage area, the proposed method considered the random uncertainty of soil parameters by means of a probabilistic approach in order to assess the stability conditions in terms of probability of occurrence of a landslide. The results of this study provide a reference for the safety assessment and preventive conservation of archaeological areas characterized by high cultural value. [ABSTRACT FROM AUTHOR]

In a changing climate, assessing the effects that the variation of the expected rainfalls can cause to slope stability is of primary importance. Precipitations are expected to increase, and, in particular, there will be more events characterised by extreme rainfalls, which legitimates the possibility of an increase in landslide activity. A probabilistic physically based model, which takes into account the uncertainty in soil characterisation, has been applied to a study area in central Italy, forced with different scenarios of expected rainfalls. The results of the prediction are compared in terms of variation of percentage of unstable territory. It is observed that the projection of the expected rainfall produces a general increase of the number of potentially unstable zones. Although many uncertainties in the analyses of the climatic trends and in their related effects at the ground still exist, the presented approach shows that physically based methods can be used to support quantitative projections of the expected impacts. [ABSTRACT FROM AUTHOR]

Satellite rainfall products (SRPs) are becoming more accurate with ever increasing spatial and temporal resolution. This evolution can be beneficial for hydrological applications, providing new sources of information and allowing to drive models in ungauged areas. Despite the large availability of rainfall satellite data, their use in rainfall-runoff modelling is still very scarce, most likely due to measurement issues (bias, accuracy) and the hydrological community acceptability of satellite products. In this study, the real-time version (3B42-RT) of Tropical Rainfall Measurement Mission Multi-satellite Precipitation Analysis, TMPA, and a new SRP based on the application of SM2RAIN algorithm ( Brocca et al., 2014 ) to the ASCAT (Advanced SCATterometer) soil moisture product, SM2R ASC , are used to drive a lumped hydrologic model over four basins in Italy during the 4-year period 2010–2013. The need of the recalibration of model parameter values for each SRP is highlighted, being an important precondition for their suitable use in flood modelling. Results shows that SRPs provided, in most of the cases, performance scores only slightly lower than those obtained by using observed data with a reduction of Nash–Sutcliffe efficiency ( NS ) less than 30% when using SM2R ASC product while TMPA is characterized by a significant deterioration during the validation period 2012–2013. Moreover, the integration between observed and satellite rainfall data is investigated as well. Interestingly, the simple integration procedure here applied allows obtaining more accurate rainfall input datasets with respect to the use of ground observations only, for 3 out 4 basins. Indeed, discharge simulations improve when ground rainfall observations and SM2R ASC product are integrated, with an increase of NS between 2 and 42% for the 3 basins in Central and Northern Italy. Overall, the study highlights the feasibility of using SRPs in hydrological applications over the Mediterranean region with benefits in discharge simulations also in well gauged areas. [ABSTRACT FROM AUTHOR]

The development of forecasting models for the evaluation of potential slope instability after rainfall events represents an important issue for the scientific community. This topic has received considerable impetus due to the climate change effect on territories, as several studies demonstrate that an increase in global warming can significantly influence the landslide activity and stability conditions of natural and artificial slopes. A consolidated approach in evaluating rainfall-induced landslide hazard is based on the integration of rainfall forecasts and physically based (PB) predictive models through deterministic laws. However, considering the complex nature of the processes and the high variability of the random quantities involved, probabilistic approaches are recommended in order to obtain reliable predictions. A crucial aspect of the stochastic approach is represented by the definition of appropriate probability density functions (pdfs) to model the uncertainty of the input variables as this may have an important effect on the evaluation of the probability of failure (PoF). The role of the pdf definition on reliability analysis is discussed through a comparison of PoF maps generated using Monte Carlo (MC) simulations performed over a study area located in the Umbria region of central Italy. The study revealed that the use of uniform pdfs for the random input variables, often considered when a detailed geotechnical characterization for the soil is not available, could be inappropriate. [ABSTRACT FROM AUTHOR]

Soil moisture is a key environmental variable, important to e.g., farmers, meteorologists, and disaster management units. We fuse surface soil moisture (SSM) estimates from spatio-temporally complementary radar sensors through temporal filtering of their joint signal and obtain a kilometre-scale, daily soil water content product named SCATSAR-SWI. With 25 km Metop ASCAT SSM and 1 km Sentinel-1 SSM serving as input, the SCATSAR-SWI is globally applicable and achieves daily full coverage over operated areas. We employ a near-real-time-capable SCATSAR-SWI algorithm on a fused 3 year ASCAT-Sentinel-1-SSM data cube over Italy, obtaining a consistent set of model parameters, unperturbed by coverage discontinuities. An evaluation of a therefrom generated SCATSAR-SWI dataset, involving a 1 km Soil Water Balance Model (SWBM) over Umbria, yields comprehensively high agreement with the reference data (median R = 0.61 vs. in situ; 0.71 vs. model; 0.83 vs. ASCAT SSM). While the Sentinel-1 signal is attenuated to some extent, the ASCAT's signal dynamics are fully transferred to the SCATSAR-SWI and benefit from the Sentinel-1 parametrisation. Using the SM2RAIN approach, the SCATSAR-SWI shows excellent capability to reproduce 5 day-accumulated rainfall over Italy, with R = 0.89 against observed rainfall. The SCATSAR-SWI is currently in preparation towards operational product dissemination in the Copernicus Global Land Service (CGLS). [ABSTRACT FROM AUTHOR]

The Mediterranean region has been identified as one of the main climate change hotspots: its sensitivity to global change is high and its evolution remains uncertain. The region experiences many interactions and feedbacks at the oceanic, atmospheric, and hydrological levels, while facing high anthropogenic activities. Analysing the water cycle over the Mediterranean region is of major importance to environmental and socio-economic aspects. The satellite monitoring of the Mediterranean water cycle represents one of the key challenges for the hydrological community.The presentation will show recent results on using satellite soil moisture and precipitation products for hydrometeorological prediction in the Mediterranean region, and particularly for the prediction of floods and landslides. Specifically, we will show the comparison of multiple satellite precipitation products for predicting flood in 100+ basins over the Mediterranean Basin by also using different hydrological models. Moreover, the assessment of satellite precipitation products for predicting the occurrence of landslides in Italy is carried out. Among the investigated satellite products, we have firstly considered state-of-the-art products such as TMPA (TRMM Multisatellite Precipitation Analysis), GPM (Global Precipitation Measurement), and H SAF (EUMETSAT Satellite Application Facility on Support to Operational Hydrology and Water Management). Secondly, we have tested the innovative products using the SM2RAIN algorithm for rainfall retrieval from multiple satellite soil moisture products including ASCAT (Advanced SCATterometer), SMOS (Soil Moisture and Ocean Salinity mission) and SMAP (Soil Moisture Active and Passive mission). [ABSTRACT FROM AUTHOR]

• A Bayesian approach has been used for merging multiple satellite rainfall products. • We created a superior product that can be efficiently run in near-real time. • Soil moisture can provide useful information for improving satellite rainfall. This work investigates the potential of using the Bayesian-based Model Conditional Processor (MCP) for complementing satellite precipitation products with a rainfall dataset derived from satellite soil moisture observations. MCP – which is a Bayesian Inversion approach – was originally developed for predictive uncertainty estimates of water level and discharge to support real-time flood forecasting. It is applied here for the first time to precipitation to provide its probability distribution conditional on multiple satellite precipitation estimates derived from TRMM Multi-Satellite Precipitation Analysis real-time product v.7.0 (3B42RT) and the soil moisture-based rainfall product SM2RAIN-CCI. In MCP, 3B42RT and SM2RAIN-CCI represent a priori information (predictors) about the "true" precipitation (predictand) and are used to provide its real-time a posteriori probabilistic estimate by means of the Bayes theorem. MCP is tested across Italy during a 6-year period (2010–2015) at daily/0.25 deg temporal/spatial scale. Results demonstrate that the proposed methodology provides rainfall estimates that are superior to both 3B42RT (as well as its successor IMERG-early run) and SM2RAIN-CCI in terms of both median bias, random errors and categorical scores. The study confirms that satellite soil moisture-derived rainfall can provide valuable information for improving state-of-the-art satellite precipitation products, thus making them more attractive for water resource management and large scale flood forecasting applications. [ABSTRACT FROM AUTHOR]