Search

• Falling head (PT) vs constant head (K fs) hydraulic conductivities across Irish soils. • Reynolds (2008) solution should be used to determine K fs in Irish context. • PT vs K fs relationship for Irish soils matches more generic formulations closely. • Comparison of international standards for soil treatment units provided. • Irish threshold PT limits for on-site wastewater treatment converted to K fs values. The suitability of a location for an on-site wastewater treatment process (for areas which lack access to centralised wastewater treatment systems) requires an assessment of the permeability of the soil into which the effluent will be discharged. In many jurisdictions this is determined using some type of in-situ percolation test. Falling head percolation tests, which give a value of percolation time (PT) that is empirically related to the notion of hydraulic conductivity, are widely used as they are relatively simple to carry out, but the test does not have a sound theoretical framework and test methods are not standardised internationally. In comparison, the saturated hydraulic conductivity of a soil obtained from a constant head well permeameter test is independent of test conditions, and so is a more suitable metric for design. A database of over 900 falling head tests carried out across a range of different subsoil types in Ireland has been collated, all with the inherent limitations of the existing regulative framework regarding the percolation test and soil texture assessment. These tests were then modelled using Hydrus 2-D numerical modelling simulations to determine equivalent field saturated hydraulic conductivity (K fs) values and thereby provide a correlation with PT values across the range of subsoil conditions. In addition, falling head tests have been carried out in parallel to constant head permeameter tests in the field and compared against the relationship derived from the broad dataset of simulated results. This revealed an optimal solution by which to determine K fs from the field permeameter test (using parameters recommended for most structured soils from clays to loams). The trendline based on Irish data was also compared against more generic formulations of the relationship between PT, and K fs and shown to match closely, particularly the Reynolds (2016) 'unified' methodology. Finally, the Irish threshold PT limits for on-site wastewater treatment have been converted to K fs values and compared against other international standards. [Display omitted] [ABSTRACT FROM AUTHOR]

On-site domestic wastewater treatment systems (DWTS) are used by a significant fraction of the world's population and are used by one third of the population in Ireland. The effective operation of these DWTS requires regular desludging and so knowledge of expected filling rates is essential for both the homeowner as well as the municipalities which accept this sludge in licensed premises; yet few studies have attempted to quantify the sludge accumulation in such decentralized systems. Field studies were carried out on 27 septic tanks across Ireland to quantify sludge accumulation rates from which optimum desludging frequencies for use in Ireland have then been determined. Sludge accumulation was found to be very high in the first 12 months of system operation (approximately 250 L/person/y) but dropped off to below 150 L/person/y after 2 years. Such volumetric accumulation rates appear high compared to the few other reported international studies; however, measured solids accumulation rates, were low compared to international estimates, ranging from 1 to 10 kg/person/y. An equation for optimal desludging frequencies between 3 and 5 years has been formulated for various tank sizes and occupancy based on the Irish field data and previous international research - 5 years being the maximum allowable interval between desludging before the limiting volume of 50% sludge in the tank is reached., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Soil treatment units (STUs) receiving effluent from on-site wastewater treatment systems (OWTSs) rely on the gradual development of a microbial biomat/biozone at the infiltrative surface for optimal effluent distribution and pollutant attenuation. Here, we present the first direct measurement of gradual biomat development in the field in STU trenches receiving either primary (PE) or secondary treated effluent (SE) under identical environmental, hydrological and subsoil conditions. Two domestic OWTSs were constructed in Ireland and monitored over a period of >2 years using an automated, three-dimensional network of buried soil water content sensors tracking water flow and retention within the soil underneath the infiltrative surface. While trenches receiving PE expressed signs of biomat formation along the entire length of STU trenches, biomats in trenches receiving SE were significantly muted and did not extend further than 10 m from the inlet at the end of the study. The presence of a mature biomat helped to retain soil moisture above background levels and made the system more resilient towards drought events and desiccation stress but led, in one case, to effluent ponding within the trenches. A growth-limited non-linear model fit revealed that biomats in SE trenches are expected to remain considerably shorter and will not spread along the entire trench design length, even after 10 years of operation, which is contrary to prevalent design assumptions. Muted biomat growth, on the contrary, might lead to localized hydraulic and pollutant overloading and has been shown previously to negatively affect the ability to attenuate pollutants effectively within the soil profile before the effluent reaches the groundwater., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)