Search

The Bakhtiary Hydropower Project with a 325 m high dam will be constructed on Bakhtiary River, in southwest Iran. The main dam has been designed as a double-curvature concrete structure which will be the highest one of its type in the world. Geologically, the dam site is located on siliceous limestone of the Sarvak Formation in the northwestern part of the folded Zagros. A large number of complicated geological structures in the study area, such as folding and duplex structure, faults, chevron folds, kink band zones as well as joint and fracture systems, raised concerns regarding the acceptability of the site for such a monumental dam. To create a comprehensive geotechnical model of the dam site and appurtenant structures, very extensive surface and subsurface investigations were carried out, including core drilling, water pressure testing, driving exploratory galleries for engineering geological mapping, a rock mass discontinuity survey and in situ rock mechanical tests. This research applies the results of the engineering geological and geotechnical investigations to define the geomechanical model of the dam site enabling options to be considered to achieve a safe dam design. The investigations show the rock mass of the dam site area is intersected by four main discontinuities namely, the bedding plane(s) of the rock mass and three major joint sets. Water pressure tests provide data about the permeability of the rock mass which is significantly dependant on the joint properties and the geological structures. These parameters, set the criteria for the design of the grout curtain at the dam foundation. The rock mass classification of the dam site was determined mainly based on the gallery survey and core logging using the rock mass rating, geological strength index (GSI) and Q system. Six classes of rock mass qualities were distinguished which show a fair to good rock mass at the dam foundation. From the plate load test results, a site-specific correlation was developed for estimating the modulus of deformation of the rock masses using GSI value. The estimated engineering geological and geotechnical parameters at the dam site are generally favorable and suitable for the safe design of the Bakhtiary arch dam with a height of 325 m. [ABSTRACT FROM AUTHOR]

This paper describes the results of the engineering geological investigations and geotechnical studies performed in the Nargesi dam site. The dam foundation located on the sedimentary rocks of Neogen period. To conduct this study, the steps including field and laboratory investigations, surface discontinuity surveying, drilled borehole data, and permeability were performed on dam foundation. Besides, the evaluation of the dam foundation was carried out by water pressure tests, which indicate the necessity of creating a grout curtain below the dam foundation. The permeability and groutability characteristics of the Nargesi dam foundation are significantly affected by geology of the site. The rock mass properties of the test section obtained from secondary permeability index (SPI) completed with the degree of jointing of the drill core acts as a useful reference for ground treatment design. Here, the performed laboratory tests were as: determination of density, moisture percent, porosity percent, water absorption, uniaxial compressive strength, Point-load strength index (Is50), p-wave velocity (Cp), s-wave velocity (Cs), deformability, and triaxial tests. The rock mass properties and classifications of the damsite is assessed using rock mass rating, the rock quality (Q), and the geological strength index classification systems. The strength and modulus elasticity of rock masses were determined through the equations proposed by different researchers. According to the findings of this work, except for some cases, there is a reasonable correlation between SPI and rock quality designation values. Based on these results, grout type and composition was suggested for the design of grout curtain. [ABSTRACT FROM AUTHOR]

Abstract: This research is concerned with the assessment of squeezing potential along the second part of water supply Karaj to Tehran tunnel. One of the new components of water conveyance system in the north of Iran is the Karaj to Tehran water conveyance tunnel that has been excavated by a double shield TBM. This research has been performed on the second part of the tunnel with 14km long passes mainly through the pyroclastic and igneous rocks of Eocene age. The geological studies include field and laboratory investigations. Based on the results and for more exact investigation, tunnel alignment has been divided into 20 geological engineering units. Rock mass classifications have been performed for all units. Then, rock mass properties were calculated using empirical equations. Because of high overburden (up to 800m) and the presence of faults and crushed zones, it was necessary to evaluate squeezing potential along the critical section of the tunnel. Therefore, empirical and semi empirical approaches and a new method as critical strain have been used for evaluation of squeezing potential. Some experimental equations were used for estimation of critical strain and also Phase2 program has been used to calculate tunnel convergence. Consequently, squeezing index was estimated. This index is used for determination of squeezing degree. As a result, fair squeezing potential was found in crushed zones along the tunnel route. [Copyright &y& Elsevier]