Search

"Aged refuse" corresponds to municipal solid waste material dumped in land, for several years. This solid waste material is chosen as an adsorbent for the current study since it is available abundantly in the state of Tamil Nadu, India, and has not been used for any other applications. The current study was conducted to get rid of the element chromium (VI) from wastewater by using the adsorption process. The aged refuse was analytically tested through various processes such as BET, TGA, XRD, SEM, and FTIR to determine the surface morphology, functional groups, thermal stability, nature of the crystalline, and surface area. The researchers conducted the batch adsorption study to validate the influence exerted by different sorts of adsorption parameters like contact time (10-100 min), initial concentration of the pollutant (50 mg·L-1 to 250 mg·L-1), pH (1-7), and the dosage of the adsorbent (0.5 g·L-1-3.0 g·L-1). In the current study, the researchers achieved the maximum adsorption capacity of 195.54 mg·g-1. From the kinetic results, it can be understood that the pseudo-first-order model was the most suitable kinetic model. Further, the study outcomes confirm that the Langmuir isotherm model is the best fit by isotherm studies which indicate the monolayer adsorption process. This study indicated that the aged refuse can be potentially used in removing Cr (VI) from water environment under standard optimized conditions. [ABSTRACT FROM AUTHOR]

Abstract: The present study was carried out to gain knowledge of current surface ozone concentrations and the effects of meteorological parameters in the highly populated urban area of Chennai, in South India. We have reported measurement results of surface ozone (O3) and meteorological parameters from 17th March to 10th October 2005. A photometric ozone analyzer continuously recorded the ozone concentrations at this site. The present study deals with the statistical characteristics of daily and monthly mean ozone levels under different meteorological conditions. The highest ozone concentrations were recorded in ESE-SE sectors. The monthly mean concentrations were higher in May (23±14ppb) and lower in April at this site (10±8ppb). The maximum hourly ozone concentration reached 69ppb on 21st April. [Copyright &y& Elsevier]

Abstract: During the summer of 2005, concentrations of surface ozone (O3), oxides of nitrogen (NO x ), respirrable suspended particulate matter (RSPM) and total suspended particulate matter (TSPM), relative humidity (RH), wind speed (WS) and wind direction (WD) were collected over successive periods of about 24h at five sites. UV photometric ozone analyzer was used to measure the concentration of surface O3. The study deals with the characteristics of hourly and daily mean surface O3 under different climatic conditions, such as temperature, relative humidity, wind speed and wind direction and other pollutant concentrations. The maximum hourly O3 concentration reached 53ppb on 17th May. The ground-level O3 concentration in Chennai varied between 2 and 53ppb. The concentration of NO x and O3 were below the prescribed limits. The TSPM values were exceeded the National Ambient Air Quality Standards (NAAQS) at Koyambedu, Mandaveli, Taramani and Vallalar Nagar study area. [Copyright &y& Elsevier]

Microplastics (MPs) are ubiquitous pollutants that affect various environmental matrices, including air, water, soil, food, and beverages. In India, there is limited research on microplastics in bottled drinking water, which is a significant route of MP exposure to the human body. To date, the data on the occurrence of MPs in national and local bottled water brands have not been studied and compared. Therefore, the current study focuses on the contamination of MPs in bottled water from different national and local brands procured from the market of Nagpur, India. The MPs were observed in all the analyzed samples. It was observed that the local bottled water showed higher MP contamination compared to national bottled water, with MP concentrations of 212 ± 100 MPs/L and 72 ± 36 MPs/L, respectively. The MPs were identified and characterized using microscopic and attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR) analysis, revealing that the dominant MP particles were fragments (71%), followed by fibers (23%), and others (6%). Among the observed particles, 50% of particles were black colored, followed by transparent (16%), red (13%), orange (8%), green (3%), blue (5%), and yellow (5%). The predominant polymer types were polyethylene (PE) and polyethylene terephthalate (PET). Overall, the pollution load indices suggested a moderate level of contamination in bottled water samples. Furthermore, the estimated annual human exposure to MPs was calculated as 5186 ± 3751 p/kg-bw/year for children and 1482 ± 1072 p/kg-bw/year for adults, making it a significant route of human exposure to MPs., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

DPM (diesel particulate matter) is ubiquitously present in the mining environment and is known for mutagenicity and carcinogenicity to humans. However, its health effects in surface coal mines are not well studied, particularly in India. In this study, DPM exposure and corresponding exposure biomarkers were investigated in four different surface coal mines in Central India. To document and evaluate the DPM exposure in surface coal miners, we characterized 1-NP (1-nitropyrene) in the mining environment as surrogate for DPM using Sioutas Cascade Impactor. Exposure biomarkers were analyzed by collecting post work shift (8-h work shift) urine samples and determining the concentrations of 1-aminopyrene (1-AP) as a metabolite of 1-NP and 8-hydroxydeoxyguanosine (8OHdG) as DNA damage marker. We observed high concentration of 1-NP (7.13-52.46 ng/m 3 ) in all the mines compared with the earlier reported values. The average creatinine corrected 1-AP and 8OHdG levels ranged 0.07-0.43 [Formula: see text]g/g and 32.47-64.16 [Formula: see text]g/g, respectively, in different mines. We found 1-AP in majority of the mine workers' urine (55.53%) and its level was higher than that reported for general environmental exposure in earlier studies. Thus, the study finding indicates occupational exposure to DPM in all the four mines. However, the association between 1-NP level and exposure biomarkers (1-AP and 8OHdG) was inconsistent, which may be due to individual physiological variations. The data on exposure levels in this study will help to understand the epidemiological risk assessment of DPM in surface coal miners. Further biomonitoring and cohort study are needed to exactly quantify the occupational health impacts caused by DPM among coal miners.

Microplastics are considered to be ubiquitous and widespread emerging contaminants. They are persistent in the nature and pose considerable harm to the environment. Their omnipresence is documented in almost all aquatic habitats, several atmospheric and terrestrial environments, and also in human consumables. The objective of this review is to provide an overview of the environmental prevalence of the microplastics in all environmental compartments, and their possible adverse impacts. It also presents review of the studies conducted in India and the epitome of potential mitigation measures. The need and direction of future research are highlighted. The review will help in determining the exposure levels, environmental consequences, and risk estimations, and will guide the researchers and policymakers.

Background: Early diagnosis is an important aspect of quality of cancer care.Analysis of the diagnostic delays and the reasons for delay helps to plan strategies to improve cancer care., Objectives: To determine the primary, secondary, and total diagnostic delay of patients diagnosed with head and neck cancer and to explore the reasons for the delay from the patient perspective., Methods: Explanatory mixed method design was used. Two hundred persons with a confirmed diagnosis of head and neck cancer attending the ENT (ear, nose, throat) cancer clinic in a teaching hospital before the initiation of treatment were included in the study. The median delay and the association of the delay with the various factors were analyzed. Sixteen one-to-one interviews of patients were done to identify the reasons for the delays from the patient perspective., Results: Median primary, secondary, and total diagnostic delays were 30 days, 30 days, and 73 days, respectively. Statistically, primary delay was found significantly longer among ever users of smokeless tobacco and significantly longer secondary delay was found among those with age less than 60 years. The reasons for the delay were grouped in the categories (i) Symptom appraisal delay due to low perceived seriousness and (ii) health-seeking behavior delay., Conclusions: The diagnostic delay was considerable. Measures to enhance symptom appraisal by improving health literacy, opportunistic screening, and strengthening the referral system would decrease diagnostic delay.

The present study is aimed at evaluating the genotype frequency of detoxifying genes such as GSTM1, GSTT1 and NQO1 in Maharastrian population of central India. The study revealed about 64.6% of GSTM1-positive and 35.4% GSTM1-null population. GSTT1-positive genotype was found to be 87.5% and GSTT1-null showed 12.5%. The NQO1 genotype of Maharastrian population showed 52.3% of C/C, 42.48% C/T and 5.18% T/T. The NQO1 of this population does not deviate from the expected Hardy-Weinberg equilibrium. The genotype frequencies GSTM1 and GSTT1 of the population when compared with other ethnic groups of Asia and Caucasians show distinct nature of Maharastrian population from other Asian and Caucasian population.