Search

The aim of this study was to develop bio-based adhesives that can be used for various packaging papers. In addition to commercial paper samples, papers produced from harmful plant species in Europe, such as Japanese Knotweed and Canadian Goldenrod, were used. In this research, methods were developed to produce bio-based adhesive solutions in combinations of tannic acid, chitosan, and shellac. The results showed that the viscosity and adhesive strength of the adhesives were best in solutions with added tannic acid and shellac. The tensile strength with adhesives of tannic acid and chitosan was 30% better than with commercial adhesives and 23% for combinations of shellac and chitosan. For paper from Japanese Knotweed and Canadian Goldenrod, the most durable adhesive was pure shellac. Because the surface morphology of the invasive plant papers was more open and had numerous pores compared to the commercial papers, the adhesives penetrated the paper structure and filled the voids. There was less adhesive on the surface and the commercial papers achieved better adhesive properties. As expected, the bio-based adhesives also showed an increase in peel strength and exhibited favorable thermal stability. In summary, these physical properties support the use of bio-based adhesives use in different packaging applications. [ABSTRACT FROM AUTHOR]

The grey silverfish Ctenolepisma longicaudatum is a new and serious pest spreading rapidly across Europe. Compared to the silverfish Lepisma saccharinum, it does not depend on relative humidity above 70% and thrives also in new museum buildings, modern storage depositories, apartments, and office buildings. Especially collections of graphic art, modern art on paper, photographs, but also archives and libraries are increasingly affected by this pest. Damage of paper objects has been reported by different authors and institutions across Europe. As these animals live in inaccessible cracks and crevices inside the buildings, we investigated the spread of microorganisms on living grey silverfish, to show a potential additional threat posed by this pest. In 8 locations in Austria living animals were collected with traps and placed for 10 min on agar plates which were incubated for 2 weeks. After incubation of 50 agar plates, between 2 and 20 colonies of fungi were growing on each plate. The most dominant fungal genera were Cladosporium (Cladosporium cladosporioides clade) and Penicillium (Penicillium glabrum, Penicillium decumbens); also, species of the genera Aspergillus, Alternaria, Botrytis, Bartalinia, Byssochlamis, Chaetomium and Mycothypha were found. The diversity of fungi reflects the common fungal community of museums and archives. The spores and mycelial fragments of the fungi are obviously travelling on the legs and bodies of the silverfish. [ABSTRACT FROM AUTHOR]

Hop (Humulus lupulusL.) is an ancient perennial crop plant, native to the Northern Hemisphere. The archaeological evidence dates back to at least the sixth century ad in Europe. Hop has been used for beer brewing, in sleeping draughts, as bedding and for antibacterial purposes. Less known is that hop fibres have also been used for textiles and paper. However, it is difficult to distinguish hop from other bast fibres. Here, we present a set of fibre features, which, when found together in an archaeological/historical material within a European context, provide a strong indication that the fibres are hop. [ABSTRACT FROM AUTHOR]

The pulp and paper industry in Europe produces over 11 million tons of waste per year. Given high landfill operational costs, thermal coprocessing with biomass may be a viable management and valorisation option for such wastes. In this work, the analysis of biomass (wood sawdust), mixture of primary and secondary pulp mill sludge and their respective blends (50 wt.%, 60 wt.%, 70 wt.% of sludge) was assessed by thermogravimetric analysis. One of the possibilities to ensure valorisation of paper pulp mill sludge is its combustion in the form of pellets containing a different amount of sludge. Production of pellets samples was realised on laboratory experimental device. The measurements showed that increasing the content of paper sludge in the produced pellets reduced the calorific value and increased the ash content. This research deals also with the effect of paper sludge on the ash melting temperatures. The results indicated that a higher content of paper sludge in the pellets increased the ash melting temperatures. This advantage of paper sludge can be utilized in co-combustion of biomass with a low ash melting temperature. [ABSTRACT FROM AUTHOR]

Recycled paperboard contains hundreds of non-evaluated or even unidentified substances that could endanger human health if they turn out to be highly toxic. It seems as unrealistic to evaluate each of them as it is to phase out the use of the problematic ones or sort out the papers and boards introducing them into the recyclate. Therefore, measures should be taken that generally reduce migration into food, such as functional barriers or functional sorbents. A general approach is used for the recycling of plastics, particularly poly(ethylene terephthalate), PET: as not every potential contaminant can be regulated, a pragmatic approach is applied, for PET mainly on the required decontamination efficiency. Criteria are required on the required efficacy of the measures to be taken. Recycled paperboard is used for various types of food contact: mostly contact is through the gas phase (evaporation and recondensation), often indirect through other layers (e.g. internal bags or for transport boxes), seldom in wetting contact. Numerous factors have to be considered. For typical folding boxes and at least strongly dominating gas phase contact, it was proposed that no more than 1% of each contaminant in the recycled paperboard should enter the food. The efficiency of the measures required to comply with this criterion depends on the application. The three main measures are reviewed with regard to this criterion: (i) internal bags with an incorporated functional barrier (successfully used for some time), (ii) a barrier layer on the internal wall of the box (for which the design of the closures might be most critical) and (iii) functional sorbents added to the paperboard (for which the sorbent capacity is critical). For transport boxes, commonly of corrugated board (quantitatively the most important use of recycled paperboard in food contact), an adjusted or different criterion is needed.

Abstract: Inks and paper are the main materials and components of library and archive collections. Since the beginning of paper and ink production empirical recipes have been followed, but in the 19th century with the transformation of Europe during the Industrial Revolution, the continent became the main leader for the discovery of new products and new industrial production processes. The aim of this study is to shed light on paper and ink production processes during this key historical period. In this study we have chosen some documents preserved in the archive of the Soprintendenza dei Beni Architettonici e Paesaggistici (B.A.P.) di Venezia e Laguna, held in the Palazzo Ducale (Ducal Palace) of Venice. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FT-IR), and inductively coupled plasma-mass spectrometry (ICP-MS) allowed us to obtain a qualitative and quantitative characterization of the organic and inorganic components in both paper and inks. Cluster analysis and principal component analysis (PCA) were employed for statistical analysis of the results. [Copyright &y& Elsevier]

Starch is one of the most important plant products to man. It is an essential component of food providing a large proportion of the daily calorific intake and is important in non-food uses such as in adhesives. However, while much is known about the chemistry and pathways of synthesis for starch, there are major gaps in this knowledge so that it is not possible to modify the quantity or quality of starch produced by plants in a predictable way. While yield has improved markedly over the last century it is no longer improving faster than the growth in population and, at the same time, farmers' incomes in Europe have been falling, especially in the UK. Thus, production, even in Europe, is not much greater than demand. In the western world an increasing amount of the harvested crop is processed and, therefore, the quality of the raw product becomes an increasingly important issue. There is, therefore, an increasing need to combine the modern mathematical modelling tools with modern biochemical tools and the modern science of genomics. [ABSTRACT FROM AUTHOR]

The purpose of the present study is to analyse the current state of the Bulgarian capital market within the framework of the strategic priorities for deepening of its integrational links to the European capital markets. The paper presents results from correlation analysis of indicators of integration of the Bulgarian capital market to the Eurozone. The results point to medium degree of integration of the Bulgarian capital market. Irrespective of the high degree of harmonization of the regulatory framework and market practices on the Bulgarian capital market still exist various barriers at micro and institutional levels. [ABSTRACT FROM AUTHOR]

Bisphenol A (BPA) is used as a color developer in a thermal paper that after a heating process reacts with a leuco dye and changes it to a colored form. Receipts from cash registers are considered as the main source of consumer exposure to bisphenols together with polycarbonates and epoxy resins. Levels of BPA and its possible alternatives were determined in thermal paper samples collected between May 2018 and May 2019 in 22 European and 17 non-European countries on all inhabited continents (220 samples in total, 133 of which were from Europe and 87 from other countries). These measurements were intended to check the level of BPA presence in receipts originating from different countries, especially from Europe in the light of changing regulations restricting its use. The effect of thermal printing on developer content was also analyzed, but no major changes in concentrations of bisphenols were observed during the process. Thus, printed receipts could be used for the determination of bisphenol content. Analysis of receipts from 39 countries has shown that BPA is still the most common compound used around the world with 69% samples containing this color developer. Among other tested bisphenols, BPS was used as a color developer in 20% samples, but it was noted that all samples collected from Japan and the United States of America were found to contain only BPS. Other bisphenols (F, AF, E, and B) considered as possible alternatives for BPA were detected only at trace levels or not detected at all, which showed that they were not used as color developers. The relatively large use of BPS as a BPA substitute is worrying because this compound not only has similar endocrine properties but is also poorly biodegradable. Besides, its relatively high polarity facilitates spreading in the environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Following the fast spread of Covid-19 across Europe and North America in March 2020, many people started stockpiling commodities like toilet paper. Despite the high relevance for public authorities to adequately address stockpiling behavior, empirical studies on the psychological underpinnings of toilet paper stockpiling are still scarce. In this study, we investigated the relation between personality traits, perceived threat of Covid-19, and stockpiling of toilet paper in an online survey (N = 996) across 22 countries. Results suggest that people who felt more threatened by Covid-19 stockpiled more toilet paper. Further, a predisposition towards Emotionality predicted the perceived threat of Covid-19 and affected stockpiling behavior indirectly. Finally, Conscientiousness was related to toilet paper stockpiling, such that individuals higher in Conscientiousness tended to stockpile more toilet paper. These results emphasize the importance of clear communication by public authorities acknowledging anxiety and, at the same time, transmitting a sense of control., Competing Interests: The authors have declared that no competing interests exist.

Starch is a carbohydrate polymer found abundantly on earth. It is synthesized in plants as a short-term storage compound for respiration in the leaves and for long-term storage in the tubers, seeds and roots of plants. A wide variety of enzymes modify or convert starch into various products. The classes of enzymes that act on starch include endoamylases, exoamylases, debranching enzymes and transferases. Starch-modifying enzymes of microbial origin are utilized in a wide variety of industrial applications. Alkaline-active amylases are diverse in terms of optimum reaction conditions, substrate and product specificity. Amylases that are active at lower temperatures and alkaline conditions are most suited for detergent formulation. Other notable starch-modifying enzymes from alkaliphiles include maltooligosaccharide-forming amylases and cyclodextrin glycosyltransferases (CGTases), which produce a variety of maltooligosaccharides and cyclodextrins, respectively. Such compounds are used in the food, fine chemical, pharmaceutical and cosmetic industries, among others. Alkaline-active amylases are also applicable in the paper, textile and leather industries and also in bioremediation and alkaline waste water treatment. Their application in these fields is further enhanced through stabilization and improving their specificity and catalytic action by employing nanotechnology and genetic engineering. Graphical Abstract *Alkaline alpha-amylase AmyK from Bacillus sp. KSM-1378. Shirai T, Igarashi K, Ozawa T, Hagihara H, Kobayashi T, Ozaki K, Ito S (2007) Proteins 66:600-610. Source: Protein Data Bank in Europe (PDBe).

Anaerobic digestion of organic waste generated by households, businesses, agriculture, and industry is an important approach as method of waste treatment - especially with regard to its potential as an alternative energy source and its cost-effectiveness. Separate collection of biowaste from households or vegetal waste from public green spaces is already established in some EU-27 countries. The material recovery in composting plants is common for biowaste and vegetal waste. Brewery waste fractions generated by beer production are often used for animal feeding after a suitable preparation. Waste streams from paper industry generated by pulp and paper production such as black liquor or paper sludge are often highly contaminated with toxic substances. Recovery of chemicals and the use in thermal processes like incineration, pyrolysis, and gasification are typical utilization paths. The current utilization of organic waste from households and institutions (without agricultural waste) was investigated for EU-27 countries with Germany as an in-depth example. Besides of biowaste little is known about the suitability of waste streams from brewery and paper industry for anaerobic digestion. Therefore, an evaluation of the most important biogas process parameters for different substrates was carried out, in order to calculate the biogas utilization potential of these waste quantities. Furthermore, a calculation of biogas energy potentials was carried out for defined waste fractions which are most suitable for anaerobic digestion. Up to 1% of the primary energy demand can be covered by the calculated total biogas energy potential. By using a "best-practice-scenario" for separately collected biowaste, the coverage of primary energy demand may be increased above 2% for several countries. By using sector-specific waste streams, for example the German paper industry could cover up to 4.7% and the German brewery industry up to 71.2% of its total energy demand., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The studies reported here examined differences in user behaviour when presented with a low-fidelity paper prototype compared to fully operational product, and evaluated the effectiveness of different types of enhanced labelling of controls. In the first study with a paper prototype, 30 users of high-pressure washers were asked to choose the settings of the temperature control for different cleaning objects, comparing standard with information-enriched control labelling. In the second study, 34 users operated a real high-pressure washer with different forms of control labelling. The results of both studies provided evidence for some benefits of an information-enriched control labelling over traditional temperature-centred controls labelling. Furthermore, a comparative analysis of the data of the two studies suggested that low-fidelity paper prototypes may have to be used with caution. Therefore, designers need to be aware that the behavioural effects induced by different design modifications may be overestimated when using paper prototypes. The implications of the findings are discussed within the framework of an enlarged concept of fidelity.

With the development of modern waste management systems in Western Europe, a remarkable increase in the distances for waste transportation has been observed. The question thus arises whether recycling with longer transport distances is ecologically advantageous or whether disposal without recycling is to be preferred. This situation was analysed using selected product and waste streams. This included refrigerators, paper, polyethylene films and expanded polystyrene. For each of these streams, a life cycle analysis was conducted with an emphasis on waste transport. The system boundaries were set in terms of the generation of waste to recycling or landfilling. The comparison included several scenarios with recycling and different transport distances. Landfilling was used as the reference scenario. The results obtained demonstrated how transport distances influence the ecological benefit of recycling. In the case of expanded polystyrene, the ecological boundaries are reached in practical situations, while with other materials these boundaries are far from being attained. In these cases, more complex and elaborate collection schemes, such as kerbside collection, which is economically convenient and shows the highest collection rates, can also be recommended.

This paper discusses the relationship between environmental and economic performance and the influence of corporate strategies with regard to sustainability and the environment. After formulating a theoretical model, results are reported from an empirical analysis of the European paper manufacturing industry. New data are used to test hypotheses derived from the theoretical model, using environmental performance indices representing different corporate environmental strategy orientations. In particular, an emissions-based index largely reflecting end-of-pipe strategies and an inputs-based index reflecting integrated pollution prevention are distinguished. For the emissions-based index, a predominantly negative relationship between environmental and economic performance is found, whereas for the inputs-based index no significant link is found. This is consistent with the theoretical model, which predicts the possibility of different relationships. The results also show that for firms with pollution prevention-oriented corporate environmental strategies, the relationship between environmental and economic performance is more positive, thus making improvements in corporate sustainability more likely. Based on this last insight, managerial implications of this are discussed with regard to strategy choices, investment decisions and operations management.

Reports that Mount Prospect, Illinois-based Network Services Co., wholesale distributor of disposable paper and plastic products, packaging and janitorial supplies, has formed a strategic alliance with INPACS, a similar organization serving European markets.

As part of an International Agency for Research on Cancer (IARC) international epidemiological study of workers in the pulp and paper industry, previously unpublished exposure measurements were assembled in a database. This article summarizes the results of 3,873 measurements carried out in the production departments of paper and paperboard mills and recycling plants in 12 countries. In the paper and paperboard mills, most of the agents were measured in the pulping and refining departments and in on-machine coating and winding of paper/paperboard. Exposures to asbestos, carbon monoxide, formaldehyde, fungal spores, bacteria, nitrogen dioxide, minerals dusts, paper dust, sulphuric acid and different solvents sometimes exceeded exposure limit values. In the re-pulping and de-inking departments of recycling plants high exposures to formaldehyde, fungal spores, bacteria and paper dust were observed. High exposures to asbestos, bioaerosols, carbon monoxide and paper dust were found in many departments; ammonia, formaldehyde, mineral and paper dust and solvents were found in coating machines; and diphenyl and polychlorobiphenyls (PCBs) were found in some special circumstances. Measurements in the newsprint and uncoated paper machine departments revealed only a few elevated exposures. In nearly all departments, measurements of epichlorohydrin, PCBs, sulphur dioxide, hydrogen sulphide and mercaptans tended to be low, often even below their detection limits. In spite of some uncertainties in the measurement data, the study provides new insights into the level and variation of occupational exposures of production workers in the paper and paperboard industry.

Soluble silicates, commercially known as waterglass, are among the largest volume synthetic chemicals in the world. Silicon from waterglass is rapidly transformed to the biologically active orthosilicic acid (referred to as dissolved silicate). This paper aims to assess the impact of waterglass on the aquatic environment in Western Europe. The emission to surface waters from the four most relevant application areas, household detergents, pulp and paper production, water and wastewater treatment, and soil stabilization, is estimated to be ca. 88-121 kton of SiO2 per year. This is a small fraction (<2%) of the estimated total amount of dissolved silicate transported by rivers to the oceans. Locally, increases in dissolved silicate concentration will decrease the ratios of N:Si and P:Si, which could influence phytoplankton species composition and favor the growth of diatoms over other groups of algae. Significant adverse effects in aquatic ecosystems are not expected.

The manufacture of paper generates significant quantities of wastewater; as high as 60 m3/tonne of paper produced. The raw wastewaters from paper and board mills can be potentially very polluting. Indeed, a recent survey within the UK industry has found that their chemical oxygen demands can be as high as 11000 mg/l. This paper reviews the processes involved in paper making and examines the effects which they could have on the environment. It also evaluates the treatment processes which are used to minimise these effects. In line with the majority of UK practice, it focuses mainly on aerobic biological treatment and, in particular, on the activated sludge process. This means that there is an in-depth discussion about the problems associated with filamentous bacteria and sludge "bulking". The paper also discusses the way in which anaerobic digestion can be applied to the treatment of liquid wastes from the manufacture of paper.

In this work, a detailed technical-economic analysis of a fluidized bed based waste-to-energy system for disposal of paper manufacturing sludges has been carried out. Specific reference is made to a case study represented by the largest plant in Italy producing recycled paper, with a daily sludge output of about 52t. The adopted plant has been sized for a nominal capacity of 140t per day also allowing the progressive elimination of sludges accumulated in a previously utilized landfill, giving a nominal electrical power output of 3.5MW. The main plant sections have been described and the adopted technical solutions have been outlined. A detailed process and equipment characterization has been carried out leading to a thorough evaluation of capital investment, operating costs and revenues. A differential analysis has been performed with respect to the alternative solution represented by the disposal of untreated sludges in an external landfill in order to highlight the savings obtainable. The economic profitability of the investment has been evaluated regarding several performance indices. The economic evaluation has been completed by a sensitivity and risk analysis in order to assess the effects of uncertainties in the economically significant parameters. Adopting most probable values, the savings obtained with the considered waste-to-energy system are evaluated in the 15--20 million Euro range during the estimated plant life of 15 years with a foreseen pay back time of 4 years. Moreover, many environmental benefits result such as the remediation of existing landfill, the avoidance of new landfills opening and very low air pollutants emissions.

Although coastal eutrophication is generally recognised as a recent phenomenon related to the well-documented increase in riverine nutrient delivery during the last 30 or 40 years, a few historical records paradoxically show that, in some places like the Southern Bight of the North Sea, or the Northern Adriatic, algal proliferation as intense as presently observed was already regularly occurring at the end of the 19th century. Estimated riverine nutrient loads from diffuse sources or from domestic point sources of waste water at that time are too low to account for these observations. We attempted a retrospective evaluation of the possible contribution of industrial activity to nutrient river loading. The figures indicate that, by the end of the last century, large scale use of traditional processes in textile and paper industries, in tanneries, candles factories and others was responsible for a dominant part of the nutrient load carried by rivers in Western Europe and could have caused nutrient inputs to coastal zones similar to the present ones.

Current methodology used for studying the microflora of pulps and boards was assessed and some improvements are recommended. Microbiological quality of 37 samples including recycled fibre pulps, boards, kitchen rolls, virgin fibre sheets and circulating process water were investigated. The papermaking process had drastically reduced the total microbial counts. The dominant microflora in all the samples were aerobic bacteria. The amounts in boards were only 10(3)-10(6) cfu g-1 d.w., whereas the untreated pulps contained 10(8)-10(10) cfu g-1 d.w. Aerobic, anaerobic and facultatively anaerobic spore-forming bacteria formed a large group in the bacterial flora of pulp samples (10(3)-10(6) and 10(2)-10(4) cfu g-1 d.w., respectively). In the boards the maximum numbers of aerobic spore-forming bacteria were about 10(4) cfu g-1 d.w. and the numbers of anaerobic and facultatively anaerobic spore formers were negligible. Moulds were common in the untreated pulp sampled at 10(2)-10(6) cfu g-1 d.w., but their occurrence in boards was close to the detection limit. Yeasts were common only in the pulps of one mill, and were found to be present in the circulation process water. Both mesophilic and thermophilic actinomycetes were detected in pulps at levels up to 10(2)-10(5) cfu g-1 d.w. However, no mesophilic actinomycetes were detected in boards, although some boards contained up to 10(2) cfu g-1 d.w. of thermophilic actinomycetes. The virgin fibre sheets were practically free of microbes. Only a few bacterial colonies were detected from the kitchen rolls.

Papers used for food packing were studied for formaldehyde migration from them by the colorimetric method with acetylacetone. The studied material comprised 14 samples of paper of Polish or foreign production: pergamenous paper, offset and sulphite papers and one sample from waste paper imported from Germany. Formaldehyde migration from these samples differed but never exceeded 1 mg/dm2, with the exception of the recycled paper from which it was 1.77 mg/dm2.

In the past 20 years, there have been numerous reports of skin and mucous membrane disorders allegedly caused by the use of carbonless copy paper, to such an extent that some people in Europe were refusing to work with it and concern was expressed in the European Parliament. In view of its undoubted convenience and superiority over carbon paper, the author was asked by the Commission of the European Communities for a report. Based on visits to manufacturers and users and the investigation of complaints, the conclusion is that, as exposure to the constituents of the paper during its manufacture is considerably greater than in its use and no cases have arisen in his experience in the industry, the complaints are more likely to be attributable to "sick building syndrome" than to the specific effect of any component of the paper.

Within the quality control scheme of the Deutsche Gesellschaft für Klinische Chemie, seven quality control surveys of thyrotropin (TSH) determinations in blood dried on filter paper have been carried out since 1980. Ninety-six screening laboratories from 12 European countries took part in these surveys. In a single survey each participant usually analysed four different samples; each of these consisted of three spots of dried blood spiked with defined amounts of thyrotropin. For the evaluations of the surveys the participants were asked to give information about their analytical results, and from these, their diagnostic classifications. The medians of the analytical results correlated well with the given thyrotropin concentrations, but the individual estimations from different laboratories varied greatly. Major discrepancies of classification were also apparent, both in the given thyrotropin concentrations and in the individual estimations. Two special collaborative studies with nine selected laboratories showed on the one hand that analysis of the largest possible part of the dried blood sample can help to optimize the precision of the results; on the other hand, considerable drawbacks related to the reagents and the methods were sometimes observed.